HP Slate 6 VoiceTab II update failed. Not started. Urgent
Madam/Sir
I received today a new update of the system. My camera does not start after installation. I received only the recovery menu opens with a constant dead android icon. Where can I download a file recovery (ROM as update.zip?), I need to reinstall my device.
Please give me a link to a good ROM. thank you in advance.
My device:
HP Slate 6 VoiceTab II 6300np
P/N: J7Y39EA #ABB
Best regards
Hello AareBern1,
Base on the package that I have provided to you (in the message), please copy this image (update.zip) on Micro SD card.
Follow the update below step:
1 power off the device
2. press and hold Volume UP + POWER buttons to enter RECOVERY mode
3. release the buttons when appears the HP logo
4. Select: 'clear the Cache Partition' by pressing volume down and Power button to select
5. Select 'apply the update of external storage' by the VOLUMEDOWN press, then press the POWER button to select
6. Select "update.zip" and press the Power button to run
7. don't do anything during the update. System will reboot when this step is complete. Do nothing when the system restarts. 8. This will show after the restart of the unit (2nd reboot), let this step complete and the system will restart once again.
Tags: HP Tablets
Similar Questions
-
I am running Vista with SP2. Windows Update worked fine until a couple of days. I think that my laptop stop before it ended. Now, windows update fails to start completely - it just hangs.
Any help appreciated.
Restore point:
Try a restore of the system in normal mode.
If this does not work, try to do a restore of the system in Mode safeTry a system restore to select a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
See you soon.
Mick Murphy - Microsoft partner
-
my creative cloud is not getting updated. the update does not start yet. It was 0% for the last 24 hours
Hello
Please follow the steps below and check it, if it helps:
1 - click wheel settings in the upper right of the cloud creative app > Preferences > sign out
2 force quit Adobe all activity monitor processes / end of task for Adobe on the process from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
3-
MAC: Right-click on the icon in the Finder and select the 'Go - To' folder option. You will get a text box, type in the following command and then press the 'return '. ("Not to be missed ~ symbol") ~/Library (It will open the folder of the user's library.)
Then go to the Application Support > Adobe > OOBE folder and folder AAM Updater so trash
WINDOWS: C:\Users\
\AppData\Local\Adobe\ MAA UPDATER and OOBE times 4-
MAC: Go to the Apple icon > System Preferences > privacy and security > firewall > TURN OFF (to do this, you will need to click on the padlock in the lower left of this machine and then enter your mac password)
Go to the Apple icon > System Preferences > Security and privacy > General > allow applications downloaded on should be in ANY
WINDOWS: see, turn the firewall on or off - Windows Windows help
5 make sure there is no other Internet active safety program - if it is then go ahead and launch CC app and login and check
Let us know if that helps.
Kind regards
Bani
-
crashed during the update does not start now
my computer laptop gateway arrested during an update (not sure which). It does not start, I get a file missing or corrupt ntoskrnl.exe error. My repair disc does not work either, I read in the forum vista repair disks are not recognized if you instaledl a service pack. So if this is the case where should I go from here. I would be most grateful for any help. jpshan
It seems that the update has affected your daughters to start.
· Do a startup repair, boot from the disk Installation of Windows Vista genuine (or one that you can borrow from someone) or a recovery disc. Here is the procedure: http://www.bleepingcomputer.com/tutorials/tutorial148.html. You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD. To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation. Push it quickly. Make the changes, save your work and exit. Put the CD in the drive and reboot. When you are prompted, press any key to boot from the CD.
If you do not have a floppy disk, you can make a bootable recovery disk by using http://neosmart.net/blog/2008/windows-vista-recovery-disc-download/ with burning software like: http://www.snapfiles.com/get/active-isoburner.html and, of course, a blank CD.
If this does not resolve the problem, try the following:
To run the Bootrec.exe tool, you must start Windows RE. To do this, follow these steps (you may need an Installation of Vista disc to do that)
1. put the Windows Vista installation disc in the disc drive, and then start the computer.
2. press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. click on repair your computer.
5. click on the operating system that you want to repair, and then click Next.
6. in the System Recovery Options dialog box, click command prompt.
7. type Bootrec.exe, and then press ENTER.
Note If rebuilding the BCD does not resolve the startup problem, you can export and delete the BCD, and then run this option again. In doing so, you ensure that the BCD is completely rebuilt. To do this, type the following commands at the command prompt Windows RE:
· bcdedit/export C:\BCD_Backup
· c:
· Boot CD
· BCD attrib s h - r
· Ren c:\boot\bcd BCD.old
· Bootrec /RebuildBcd
If this does not work, then withdraws EasyBCD http://neosmart.net/dl.php?id=1 and run this process and see that helps.
If not, then please repost your question in Forum Windows Update: http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where update problems specialists will be happy to assist with the problems you have encountered. Be sure to include the names and numbers KB ALL updates that have been installed before this problem started.
Good luck and I hope this helps!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Since the last update will not start using 3 gb switch.
From the windows of the last update we cannot start Windows XP (SP3) x 32 using the/3 gb switch. What is happening on three different computers. We need the switch / 3 gb to properly run SolidWorks.
We have finally "solved" the question of rolling back our video drivers. I'm at home right now so I don't know the exact nVidia video card or driver, as far as I know, it's that they came on ready Solidworks HP workstations. I also know that we had been turn most recent for a year with no problems drivers until this update of Windows one did what he did. Just for fun, I reinstalled the latest driver once and once more the switch / 3 gb stop working.
-
CS LR6 of CS LR5 update does not start
Hi, I have just install CS LR6 by buying the upgrade. Everything seems fine with the process (from download to install), but LR6 does not start when I click on it.
I've only had this open window: '
Translated, that means, there is a problem with my setup (I don't think while I used LR fair, 5 five minutes ago no problem) and that I should try to uninstall and reinstall... I can't uninstall uninstall link is too broken.
Any help would be welcome.
Stone
OK got it working, but I had to delete all the files Adobe virtually any Mac application, kept only some newspapers (I thought it can't hurt and I'm tired of this mess) and then do a clean installation/configuration in this order:
-Install the creative cloud with the CreativeCloudInstaller.dmg downloaded from Adobe
-Disconnect of the CC of the preferences panel and leave CC (after a while of waiting for the "Exit" option to be available on the menu, don't know why).
-Install Ligthroom 6 LS11 my purchase of upgrade .dmg Installer and download.
-Launch LR and follow this way to serialized: using Adobe Photoshop Lightroom | Serialize Lightroom trial to activate like Lightroom 6 CC
Now, I have to install PS CS6 back and all my plugins and settings.
If you need to do to, be sure to have backups secure (several).
This solution is really the only one that worked for me, because I think I've tried almost everything I see here (reconnection of the CC, restart, reinstall, delete files, give rights to libraries and so on).
For the moment, everything is fine (I have no time to seek more internal LR6 bugs) and I got the standalone version works even without connection internet (I tried).
-
Win XP pro. SP3. Update does not start.
I got my newly installed Win XP PRO SP3. And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc. If someone now what to do please help, need it for work.
I got my newly installed Win XP PRO SP3. And when i lunch win update it's not running i tray wait but after a couple of hours i give up and shut down pc. If someone now what to do please help, need it for work.
Hello
Follow these steps.
Go to Start, run, copy and paste this command, then click OK: services.msc
(Press the Windows key + R if you do not "run" in the start menu)In the list of Services, see Background Intelligent Transfer Service or BITS ?
If it is not listed, please follow these steps if you have a desktop computer. If you have a laptop, go to section 2
Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll
Research should show this file in the following locations:
C:\Windows\System32
C:\WINDOWS\ServicePackFiles\i386
C:\WINDOWS\system32\bitsI hope they are all present, follow these steps to register the service.
Go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK
Do the same with this file: regsvr32 qmgrprxy.dll
Restart the PC and then copy / paste this command into the field run:
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.infIf you are prompted to insert the Windows installation CD, ignore this and in the dialog below, replace the path C:\WINDOWS\ServicePackFiles\i386
The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.
Restart the PC and then go to the Services and you should be able to see BITS in the list.
Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.
If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dllReboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupReboot once more and then do the following.
Go to this link and install the IE8 December Update:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404If you use IE7, use this link instead:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442Finally, go to the Windows Update site and you should be able to download normally.
==========================
ARTICLE 2 FOR LAPTOPS ONLY
==========================
If qmgr.dll is only present in C:\WINDOWS\system32, follow these steps.Open the system32 folder, locate qmgr.dll, then right-click and choose copy.
Stay in the system32 folder and right-click anywhere and click on New, then folder. Rename the new folder into pieces (in lowercase).
Open the folder of bits that you just created, right-click in the right pane and choose Paste. You should see the qmgr.dll file in there.
Close Windows Explorer and then go to Start, run , and copy/paste: regsvr32 qmgr.dll and click OK
Do the same with this file: regsvr32 qmgrprxy.dll
Reboot the system and then copy / paste this command into the field run:
%windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.infIf you are prompted to insert the Windows installation CD, ignore this and in the lower dialog box, change the path to C:\WINDOWS\system32
Restart the PC and then go to the Services and you should be able to see BITS in the list.
Double click on it and then on the general tab, click the Start button to start the service manually. This is just a test to make sure that it works correctly.
If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dllReboot again and try once more to start the PIECES. It should work fine now, but in the unlikely case where it fails again, run the following command, and then press ENTER:
Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackupReboot once more and then do the following.
Go to this link and install the IE8 December Update:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41404If you use IE7, use this link instead:
http://www.Microsoft.com/en-GB/download/details.aspx?ID=41442Finally, go to the Windows Update site and you should be able to download normally.
-
iOS update will not start - check says no WiFi internet - works
My 5 received an iPhone upgrade to iOS 9.3. It goes to the screen install now, demand for my access code. Provides terms and Conditions. I agree. A "check for update...". "is displayed. Then an iOS error 9.3 failure of verification because you are no longer connected to the Internet. WiFi is active and I can access the programs based on the Web, including the APP Store. Any ideas?
Apple removed temporarily updating on 'old' devices, so you will not be able to update until they release it again.
http://www.MacRumors.com/2016/03/25/Apple-ios93-iPad-2-update-bugs-remain/
Don't bother trying for a few days.
-
The F65 firmware update does not start
Hey everybody,
We have tried to update the F65 the last built (2.20) the other day, but without success.
We had it before on another version (before v2); but now the camera would not recognize the update on the sd card. No matter how we tried (to extract the contents of the folder 'media' at the root of the sd card).
We tried formating the card in the f65, copy the files on a mac. without success; formatting the card in the f65, copy the files on a windows machine. without success.
Is there a backup how-to guide somewhere?
Thank you
Sam
Well, everyone - forge on the F65 SD cards.
I put the hand on a 1 GB Pro DUO Mark2 Memeorystick which instantly worked...
-
Satellite 2800-400 Bios Update - will not start
Hello
I hope someone here can help me.
I just did an update of the bios on a S2800-400. The machine worked perfectly up to this point, has never had a problem at all. (should have been better I guess)
Anyway, he is been 192 MB of ram and a 60 GB drive upgrade and works happily in this config for some time. The change I wanted was the ASPA compliance, but for some reason, the machine pours just as soon as he's trying to start now. The update of the bios has been according to the instructions and successful that the messages show. Do not know what to do now... Where can I find the old bios files? return to orig
Thanks in advanceHello
As far as I know old BIOS version can be installed just in Service partner. Another possibility is to try to reinstall the OS from restore CD. Maybe using.
-
Compaq Presario V2000
After you install the updates, H.E. XP crashed.
Try to start in safe mode accused the MUPS. SYS line
press F8 to disable automatic reboot
Restart in any mode result in the horror of horrors the Blue Screen of Death with the following error codes:
STOP: 0x0000007E (0x805BA6EC, 0xF79372B8, 0 x 80000003, 0xF7936FB4) and any other information about the error
RAN on PhoenixBIOS diagnostic test; all tests passed
Can not get into windows to run restore. Any advice? Have a Compaq I don't have the OS or restore disk (did not come with it). I do try to find a copy of XP itself?
Thanks for any thoughts!
Go to the http://social.answers.microsoft.com/Forums/en-US/xprepair/thread/8a2928b5-9fdf-4c40-8afc-edde6b808b79/ wire
-
After the first 2015.3 update will not start
It's pretty weird. Adobe Upadater shows me that he updated for first 2015.3. When I look for the program folder, the folder name is 2015.3 as well. When I run the application, the start screen displays 2015.4. Then the splash screen disappears and nothing happens.
Does anyone know how to solve the problem of not first start?
Disconnect from the cloud,
Restart the computer,
Sign in,
Try again
see how it goes.
-
9.5.1 ACR update will not start
I have a Mac 10.11.4 running ACR 9.1.1 on CS6. I need to update to ACR 9.5.1 because 9.1.1 did not open my new NAVE of Nikon D500 files. I downloaded 9.5.1 successfully, ran the installation and he says that it has been installed successfully. However, the old version 9.1.1 continues to be the opening ACR version that will not open these new files D500. I installed the new version several times and reloaded several times but 9.5.1 still will not be displayed, but whenever he said that it successfully installed. Any help would be appreciated. I'm frustrated to tears to know why this does not open.
Ceased of Adobe Camera Raw to 9.1.1 for CS6
You must convert your RAW to DNG with the free DNG Converter.
Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 9.5.1
How to use: Camera Raw: how to use Adobe DNG Converter - YouTube
Gene
-
The BIOS update will not start on Satellite L40 - 14F
My laptop was acting wonky so I downloaded the latest update of the BIOS, but when I opened a small black window jumped to the top for a brief second and then nothing happened.
I tried several times, it does the same thing. I use Windows XP with SP3. I'd appreciate any help :(
Update BIOS you have now and the one you are trying to install?
-
MacPro with new El Capitan update does not start with two monitors
Does anyone have a fix for this? I updated last night and now it seems to start both monitors in wide screen mode. I have to unplug a monitor and do a hard reboot to see my login screen. Any help would be appreciated.
new MacPro (end of 2013), Yosemite 10.11.2 3.5 ssd flash 6-core
Thank you
-
What follows?
have you tired by ensuring that everyone is on a different port TB.
For what to ports are on which bus see:
Use multiple screens with your Mac Pro (end 2013) - Apple Support
Maybe you are looking for
-
Folder, subfolder etc.
-
Memories of game do not recognize the WD My Passport HARD USB 3.0 drive
When I tried to export media to drive external HARD, memories of playing did not drive HARD USB 3.0 of Western Digital My Passport (2 TB), even when I plugged into a USB 2.0 port. It recogizes however, older USB 2.0 HARD drive! Can someone tell me wh
-
How to bind the requirements to the cycle of the target using OTA
I have a list of requirements that have been linked to previous cycles of target to ALM. I would now like to add a new cycle to the same specifications while maintaining the cycles that were previously assigned. So where a requirement had 2 previou
-
EF 24-105 corners dark lens issue
I recently bought 5 d MK iii with kit 24-105 kit, I found a lot of pictures a dark corners. is this normal? someone has tha same problem?
-
I have a HP Photosmart 2610 running on XP. It was working perfectly until fairly recently when stopped the scanner being recognized. I've uninstalled and reinstalled the software from the product without success. I've heard others lose this facility