HP Slate 7 restarts when you try to videoconferencing

Similar Questions

• Qosmio G30-153 stops and restarts when you try to run programs and games

  I bought inscribed in the computer of 22 days ago. After 4 days of work without problem the laptop started to plant a blue screen, mainly with the "MEMORY_MANAGEMENT" error

  Very often when you try to play a 3D game or using any program (internet browser, file manager or almost). As the Blue error screen is essential to the system, the computer restarts by itself, but even more often an (specific to the program or to a standard error window

  Windows "(nous sommes désolés, mais le programme doit mettre fin à cause de l'erreur...-une erreur principalement dans certains fichiers.dll dans le répertoire Windows) appears disabled to continue the work on the program until you restart manually."

  I restored the system once already - it did not help, I also downloaded the latest drivers, including upgrading the Bios.

  What can be wrong, I have no idea. Help, please...

  Hello

  Can you please tell us what games you have preinstalled and programs? Description of your problem is quite general and it is not possible to have any concrete indication that may be the problem. For some time, I have G30 and operating system runs very stable with standard applications such as Microsoft Office, Skype, Icq, MSN messenger and IE7 with LAN and WLAN connection.

  Up to now, I really didn't notice any problem. Because of this, I really want to know what programs you're using.

• The computer restarts when you try to stop.

  When I try to shut down my computer, it automatically performs a reboot, forcing me to manually shut down the computer with power butter. In addition, the computer sometimes restarts automatically if left idle for too long.

  Hello

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also this, so you can see the probable bluescreens. (You can or may be able to)
  see them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on machine? Be one you have
  EVER had on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Vista restarts when you try to configure the updates (stage 3 of 3 0% complete)

  Hi all

  Some time ago I got a video card fails on me during an upgrade. Of course, I had to stop him to bring it to the store for repair. Given that the video card has been fixed I can't restart the machine at all.

  I tried to start in safe mode, but unfortunately it did not work. I can not connect because she also tries to apply the update on hold in this mode. From last known good startup didn't work either.

  I also tried to recover from original DVD, but it did not help. Auto repair has failed, and it did not find my disk-based restore points when I tried to recover from a restore point (and I know that I have several of them already...).

  I don't want to lose the data on this machine (and yes I learned the hard way to do backups and I bought an external hard drive for this purpose), so from scratch is not really an option for me.

  Help, please!

  D.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows 7 IT pro forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/w7itproinstall/threads

• Only get a blinking cursor when you try to start after the installation of updates

  Original title: blinking cursor when you try to start

  After installing Windows updates last night, our laptop Dell running that Vista gives only a blinking cursor when you try to start

  Hello

  1 update you tried to install?

  Step 1:

  You can check out the following link and try the steps.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Step 2: When you're able to start normally, check the history of update to discover updates failed as a result of the article:

  See the Windows updates are installed

  Step 3:

  If there are updates failed, then try to download and install the stand-alone package with updates from the Microsoft Download Center.

  a. to download updates from the Microsoft Download Center

  b. Enter the item number in the field search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

  Hope this information is useful.

• When you try to reset or uninstall I get a message saying I have to restart to complete the installation of a previous version. Any suggestions?

  After downloading v25.0.1, FF has been slow. I tried the reset, but it would give me the message that I have to restart to complete the installation of a previous version. I tried to uninstall, but the version on the list was v 21. I received the same message when you try to uninstall. I want to upgrade to v 25.0.1, but something prevents the process.

  Do a clean reinstall and delete the program folder before Firefox to (re) install a new copy of the current version of Firefox.

  Make sure that your security software (antivirus) is not blocking files, preventing Firefox update all files in the Firefox program folder.

  Download a new copy of Firefox and save the file to the desktop.

  • 25 Firefox: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible, the settings in the software security and cleaning of the Windows registry.

  • Do NOT remove the data personal when you uninstall your current version of Firefox, because all profile files will be deleted and you lose personal data such as bookmarks and passwords from other versions of Firefox profiles.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • (32-bit Windows) "C:\Program Files\Mozilla Firefox\"
  • (Windows 64 bit) "C:\Program Files (x 86) \Mozilla.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other personal data are stored in the Firefox profile folder and will not be affected by a uninstall and (re) install, but make sure that 'delete personal data' is NOT selected when you uninstall Firefox.

  If you keep problems also create a new profile.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• When you try to access some programs, Windows Vista will stop and then restart

  There are some windows programs that I can't access because my computer says that windows has stopped working then he says looking for a solution and then he says: restart windows. I can't access my programs and features to remove some programs I think may be worth. I can't access MY computer optison either.

  Hi billdee,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what happens when you try to uninstall the program?

  Method 1: Run the fixit available in the links below and check if that makes a difference-Worth to try
  Difficulty of broken desktop shortcuts and common system maintenance tasks

  Note: FixIt would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area.

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

   

  Method 3:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

  Method 4: check the logs in Event Viewer for more information on this problem

  Open event viewer

  What are the information in event logs? (Event Viewer)

• 42 error code when you try to delete the file

  PDF file which can be opened and read.  However, when you try to delete the file, error file not found 42 made its appearance.  MacBook Pro computer

  Please relaunch the Finder , and then try again. If there is no change, restart the computer.

• When you try to start Firefox I get a message saying "a copy of Firefox is already open. Only one copy of Firefox can be open at a time. "I started a new profile, but the Profile Manager always tells me that by default it is still in use.

  When you try to start Firefox, even once, I got a message saying "close Firefox. A copy of Firefox is already open. Only one copy of Firefox can be open at a time. "This issue is addressed in Mozillazine but nothing I've tried there seems to work. I started a new profile in the profile manager that gets at least upwards and the functioning, but strangely enough the Manager also told me the old (default) profile is still underway, although I can't find a way to close it. Also, I can't find the default profile in my Profile Manager. can anyone help?

  This has happened

  Just once or twice

  == I thought that I had left Firefox and he was new.

  I get the same problem from time to time. It is not a solution but I go into Task Manager (select by right clicking on an empty area of the start bar) and under the research process and, invariably, there is a 'hidden' version to use the FF. I selects & close via Task Manager and then am able to restart FF.

• HP 15 F018dx: Error notice when you try to search the drivers + occasional noise from the fan

  Hello. I just did a scan of software on the hp site and it recommended related diagnostic software and I installed it.

  But when I try to do a software scan and the pilot of "search for the updates and recommendations" on the website of HP support for my laptop model, I always have this:

  "HP has encountered an error when trying to analyze your product.

  Please verify that your product is turned on and connected, and then try again in a few minutes.

  Or display all drivers available for your product below. »

  I'm sure that my laptop is up-to-date with software and drivers because my HP support assistant software can't find nothing available, but I'm just curious as to why I get this error on the hp site.

  Another thing.  Very rarely, it looks like one of the fans (or is the hard drive?) in the laptop will be rev suddenley plus enough fort. If I stop the laptop turned off and on again, the fan noise is back to normal - nice and very quiet. Even just quickly put the laptop to sleep and wake it will fan (if that's what it is) back to normal. This loud fan noise maybe happens once every 2 weeks if I average.

  Initially, I thought that this problem of fan noise may be caused or related to a game (asphalt 8) that seems to cause fans to redouble efforts in general (but this casual loud fan noise I'm talking is much stronger than that) when the game is played and the problem seems to occur more frequently with installed. However, I uninstalled it for a few days (although I don't know if I did a reboot after that I uninstalled it) and it arrived this morning after starting with past nothing. I suppose it could still be linked to the game, but I'm not sure. I restarted the laptop and now it is fine.

  As I said that the problem occurs very rarely and most of the time my laptop is very quiet, but still I would like to understand/fix the issue if I could. It of one of the reasons why I was trying just a software/driver scan to see if something is recommended on the site but when I do this pilot analysis I get this error and have always.

  Thanks for any help or suggestion.

  Tom

  Hi @tomstar,

  Thank you for posting. I read your post, and I understand that you received the error message when you try to run a verification of updates and recommended software on the HP Web site. You need not worry since this could be a problem connecting to the HP Web site.

  For the issue of fan, here's a document can help: computers laptops HP-Fan is Noisy and runs constantly, PC is hotter than normal

  Let me know how it goes.

  To say thank you, click on the "thumbs-up". Accept the post as a solution, if your problem solved, so that other people have the same problem can see it.

  Kind regards

• Error when you try to delete snapshots

  Hello

  I have problems when you try to manually delete snapshots of our ReadyNAS. The error is displayed when it fails is 28004020002. After a search through your forums it seems most of the time you ask newspapers, and then it seems that the problem is solved. So if need be I have newspapers available on request.

  One of the suggestions also says try a defrag on the device and that pops up and displays a different error message: 14007010000. I don't know if that is related, but I have not dug deep in this one I would like to help with the first issue first please

  All comments are greatly appreciated.

  This is the topic I was looking at early to try to help with my problem.

  https://community.NETGEAR.com/T5/backing-up-to-your-ReadyNAS/error-when-trying-to-delete-snapshot/TD...

  Fixed.

  Please do not restart the system until the balance is over. The balance will take time to complete.

  You can see the progress made in the web administration interface.

  In addition, you can plan a balance to say run every 2-3 weeks.

• 80073701 error code when you try to install KB2378111 update on Windows Vista

  When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer.  After the reboot, I get a message that the installation has NOT been successful.  I tried to install this update three times, and I still get the same error code: 80073701.

  See the section "How to get help" of http://support.microsoft.com/kb/2378111

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a free Windows Update support incident email request:

  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

• I have error code 8024200d when you try to update and install SP1 for Vista

  I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.

  Thank you!  Matt

  Matt,

  The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
  Update Manager did not install the update because it must be downloaded again.
  Suggest you download and Save the complete stand-alone package of Vista SP1.

  Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)

  Before attempting to apply the SP1 please consider this information-

  If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.

  Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
  Move the downloaded Service Pack in the newly created folder.
  Disconnect all the devices, printer, external USB hard drive, etc.

  Then, Configure the system starts in a clean condition
  After you restart the worm as a clean boot, apply SP1.

  If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
  Microsoft technical support

  Or, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert

• Error code: 0x8007F004 when you try install kb2286198 and kb2229593 on Server 2003 R2

  He suggested another forum MS that I post this here. I am updating a Win2003 R2 Server with kb2286198 and kb2229593. Initially, I found little or no info, but read things on WXP shows that it could block the antivirus software. AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  If anyone has any help it would be great.

  It has been suggested from another MS forum I post this here... AV has been disabled, I'm an admin on the server is my colleague who gets the same permissions error when you try to manually install these updates as well.

  Posted in your original thread: I have a 2 k 3 R2 server running software to clock and network shared directories for my business. Server is blocked on a KB2229593 update and I can't find a way to allow installation. When I try the normal windows update, it can quite simply, when I try to install it manually it gives me an error, you are not allowed to install in contact with server 2003 from your system administrator.

  8007f004 - STATUS_INSUFFICIENT_PRIVS [PRIVILEGES]

  In fact, the error suggests that the behavior can be due to infection. That being said...

  You have restarted the server since the initial failure to install KB2229593 (which was released July 13) or the inability to install KB2286198 today?

  ~~~~~~~~~~~~~~~~~~~~~~~

  Don't not giving you skin but I think you'd be much better off the coast of post in this forum since we really don't deal with Windows Server in the Windows Update forum:http://social.technet.microsoft.com/Forums/en/winserversecurity/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows7 64 I get C646 error when you try to install KB982331

  In Windows7 64 I get C646 error when you try to install the update of security KB982331.  I tried Windows update and download it directly.

  Hello

  Here's what I recommend you do:

  1. Tower of AUC. Down comes the restrictions - turn it off completely.
  2 restart your computer for the change to take effect.
  3 re - download the update of security for Microsoft Office System 2007 (KB982331) from the link below:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=7f89a734-cda4-4abb-9a10-f6dfe560e8d0&displaylang=en
  4. install. It should work fine.
  5. If it still does not work, try to open all or part of your MS Office applications (such as MS Word, MS Excel, etc.).
  6. follow step 3.

  Let me know your results.