HP Solution Center does not recognize the network printer

Network has a hp 309 a printer, can print from the computer, the problem is:

HP Solution Center not load-says incomplete installation.  If I plug in the USB cable and let it continue, it sets up a second printer that only works on the USB cable and it still does not recognize the network printer.

Question how can I get the Hp solution program to reward the network printer.  If I reload the CD, then reinstall the will other people on the network of the problems?

Resettlement on your machine won't affect only you, no other machines on the network.

Tags: Notebooks

Similar Questions

  • Solution Center does not recognize the printer

    The printer is a HP C7180.  Operating system is Windows 7 (64-bit).

    Solution Center says that printer is offline - but it is connected & running.

    What to do?

    Uninstall the HP Solution Center.  Install the latest version of the appropriate operating system available on your printer's web support portal.

  • Portege R100: WLAN does not recognize the network

    I have a 2 year old Toshiba R100 Notebook.
    It has a wireless adapter:

    Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

    We have tried several times and had technicians trying to connect to our WAP network office. He simply do not recognize the network and we offer all mailboxes menu to connect. It works fine on WEP networks and open.
    Our network is one: -.

    Cisco Linksys Access Point Wireless-G with SRX, model WAP54GX

    It has been suggested that I have buy a wireless card for WAP networks put in the slot of the card.

    Would you agree?

    If so, then that one would you recommend?

    Hello

    It seems that the card supports only WEP encryption and cannot handle WAP encryption that secures the WLan network.
    Fact is that encryption depends on hardware and not software. This means that if the card doesn t supports the Protocol WAP for the update of the driver will not change this situation, but only a replacement card.
    So I agree with you that the replacement card may solve your problem.

    Unfortunately, I can't give you any recommendations because I m not 100% sure what card uses the WAP protocol, but you can order the Wlan card compatible and supported by the Toshiba service partner in your country. AFAIK the guy order the Toshiba parts directly.

  • Windows Security Center does not recognize the webroot security essentials

    I have webroot essentials of security installed on my windows 7.  The Security Center is not recognize the program. This program has antivirus, antispyware and firewall.  The webroot program works normally. Security Center sees no antivirus, windows firewall is enabled (but in fact webroots Firewall works), says and shows that the antispyware windows Defender (previously, he showed have spy sweeper from webroot and windows defender). My question is how can I get the windows Security Center recognize the webroot program? THX

    Hi, thank you for responding. I could solve my problem simply by uninstalling and reinstalling the webroot program. After you reinstall and reboot, windows security center see and recognize the antivirus, firewall and antispyware components

  • I have 3 different places in different printers 3. HP Solution Center does not recognize all but 1.

    I have 3 different printers HP F4400, officejets 6500 E710n-z and 709n in 3 different places. HP Solution Center only recognizes F4400. How can I get my Solution Center to recognize the other 2 without reistalling all the time. Here my current printer can print on 710n-z but the printer cannot scan, says no printer detected. How do I solve this

    It's very strange. Try to create a new user account and setup the printer on this account. If this does not work, try to install the printer on another computer and see if it has the same problem. Let me know what happens.

  • Security Center does not recognize the Windows Security Essentials

    Windows Security Essentials does not seem to register with Security Center.  Security Center reports that no Virus protection is enabled.

    1. I installed Windows XP 32 - bit WGA, activated the product and updated to SP3.

    2 security Center starts giving Windows security alerts for Virus protection, because none has been installed.

    3. I installed McAffee VirusScan.

    4 security Center stopped giving Windows security alerts for Virus protection.

    5. I uninstalled McAffee VirusScan.

    6 security Center has resumed giving Windows security alerts for protection against the viruses as before.

    7. I installed Windows Windows Security Essentials and rebooted.

    8. I tried to uninstall and reinstall Windows Security Essentials with no joy.

    Windows Security Essentials installation did not prevent Windows security alerts.  No Windows Security Essentials registry entry will appear in HKEY_LOCAL_MACHINE/Software/Microsoft/Security Center and monitoring.  If Microsoft consider essential security to be an antivirus product, then how to Windows Security Essentials register with Security Center?

    I understand that this is an information and alert issue only.  I understand that Windows Security Essentials works actually ok.  I am particularly concerned by the reports.  It conditions my deployment of Windows Home Server.  Deactivation of surveillance or the alert is not a solution, just a poor quality work around.

    In a previous thread, the author of this question even abandoned and has not requested additional assistance.  An explanation was given (relevant for Windows 7), but no solution has been offered.  Windows XP has not been addressed.   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-Security-Center-has-not-recorded-an-anti-virus/15ae2383-7ced-4850-A863-f7eb8cc90ee5

    I had the same problem for a while now (I'm on xp) and have searched the Internet for a solution but found nothing at the moment.

  • HP Office Jet Pro L7590: HP Solution Center does not recognize my printer

    When I try to open the HP Solution Center, I receive a warning tha no devices are detected and yet pints them of pinter and crystallized.

    Hello @BEARS5,

    Welcome to the Forums of HP Support!

    I would like to help you today to solve the problems of detection of product that you encounter on your Windows Vista-based computer when you try to use the Solutions Center HP all-in-one printer, HP Officejet Pro L7590. There are certainly some kind of product detection software or driver glitch that makes the error "detection". To solve this problem please can I you follow the steps below.

    If you use a USB cable connection, please unplug this cable now.

    Step 1: Uninstall the drivers:

    1. Click on the Start menu
    2. Select all programs (or programs)
    3. Select the HP folder
    4. Select your HP Officejet
    5. Select Uninstall

    Follow the instructions on the screen to complete the uninstallation of your product. After the uninstall completed successfully, please proceed to the next step.

    Step 2: Remove temporary files:

    1. Click on the Start menu
    2. In the box "search programs and files" located just above to start after you click on it, type %temp% , and then press enter on your keyboard
    3. When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will highlight now.
    4. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. A Temp file should you will automatically get the pop up to 'jump' this point.
    5. Close the Temp folder when it is empty
    6. Right-click the recycling bin on your desktop and select empty recycling bin

    Step 3: Reinstall the drivers:

    1. Please click here to install the drivers for your computer
    2. Once the site opens click on the download button at the top left
    3. If you are prompted, please allow the download to run it
    4. Once the download is complete, follow the instructions on the screen to reinstall your printer
    5. Please do not connect the USB cable until the installation program invites you to

    Once the installation is complete, please open the HP Solutions Center to check if your HP Officejet is now detected and works correctly.

    Please reply to this message with the result of your troubleshooting. Good luck!

  • I'm trying to get my computer to change printers, but it does not recognize the other printer.

    I have HP 2410 PhotoSmart all-in-one printer.  I used this drive to install it on three other computers.  So I know it's the right disc for this printer.

    I now have a NEW computer and a printer that I used.  The new printer is giving me.  He came with a disk and it says that I need a "Reinstall".
    Instead, I decided to just go back to my old printer for awhile.  But now the drive will not pick up the old printer.  He is looking for the newest printer is out of use.
    At least that's MY opinion.  What now?

    Hello

    1. What is the brand and model of the new printer?

    2. these computers is on a domain network?

    3. what happens when you tried to install the new printer?

    Looks like that the printer needs a new together drivers to make it work. The best thing you can do is that you can download and install the drivers manually on the printer manufacturer website. You need to find the correct drivers.

    Reference:

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Update drivers: recommended links
    http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

    Once the printer is ready, you can change the printer and set a default to use according to your wish.
    Note: applies to Windows Vista and more.

    Reference:
    Change your default printer

    http://Windows.Microsoft.com/en-in/Windows7/change-your-default-printer

    Hope this information helps. Response with status so that we can help you.

  • Streets & trips does not recognize the default printer

    I have recently install streets & trips 2010. When I put the cursor on the icon of the printer it shows my printer by default, but when I try to print it says that no printer is installed. I reinstalled my printer without result.

    In addition, if I try to use automated help, he asks for my product ID. When I run the program (it works very well, everything will not print) and go to help, it shows my product id under the name of all zeros with (detail) later.  automatism is said is not valid!

    Hello

    You can use microsoft help if you have a retail version of vista

    versions of vista preinstalled oem dell, hp etc are not eligible free microsoft support

    all support comes from the manufacturer of the computer or feel welcome to ask in these forums

    Try this for your printer problems

    You can follow the information to try to solve your problems of printer below

    read the printer correct that information the slot microsoft, including the 'fix - it' and the other links here

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    and read this microsoft tutorial too

    Introduction

    This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

    How to use this tutorial

    For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • XP Media Center does not recognize the atsc tuner

    Comes with a mistake to try to at least one device with ntsc tuner.  I have an atsc/qam tuner.

    Operating system   System model
    Windows XP Media Center Edition Service Pack 3 (build 2600)
    Install language: English (United States)
    Local system: English (United States)
      Dell Dimension E521 Inc.
    System Service tag: 1K6C6C1 (support for this PC)
    Chassis serial number: 1K6C6C1
    Case type: Desktop
    Processor   Main circuit
    2.00 GHz Dual Core AMD Athlon 64 X 2
    hides the central memory of 128 kilobytes
    1024 kilobyte secondary memory cache
    64-bit ready
    Multi-core (2 total)
    Not hyper-thread
      Board: Dell Inc. 0CT A03 103
    Serial number:... CN708216AQF10C.
    The bus clock: 1000 MHz
    BIOS: Dell Inc. 1.1.4 12/09/2006
    Readers   Memory modules
    349.53 GB drive hard usable capacity
    292,35 gigabytes of free disk space

    HL-DT-ST DVD-ROM GDRH10N SCSI CdRom Device [scanner]
    TSSTcorp DVD +-RW TS - H553A SCSI CdRom Device [scanner]

    WDC WD5000AAKS-00UU3A0 [hard drive] (500,11 GB) - drive 0, s/n WD-WCAYU6672846, rev 01.03B01, SMART location: healthy

      3072 MB usable memory installed

    Slot machine 'DIMM_4' has 1024 MB (serial number E82397F1)
    Slot machine 'DIMM_3' has 1024 MB (serial number E823981D)
    Slot machine 'DIMM_2' has 512 MB (serial number F802488F)
    Slot 'DIMM_1' has 512 MB (serial number F802485E)

    Hello

    1. What is the brand and the model number of your TV tuner card?
    2. is it compatible with Windows XP Media Center? She never worked properly on your computer?

    Method 1.
    First of all I ask you to install the latest drivers for your manufacturer's Web site TV tuner card and check out them.

    Method 2.
    Also, check out the methods listed in the articles below and check.
    You receive an error message "No. Tuner available" when you try to watch TV Online after connecting a USB TV tuner to your computer Windows XP Media Center Edition 2005
    http://support.Microsoft.com/kb/891108

    Update 1 for Windows XP Media Center Edition 2005
    http://support.Microsoft.com/kb/873369

    I hope this helps.

  • I have a hp compaq dc5800, that is used. The pc does not recognize the network interface card.

    I reinstalled win xp pro. When finished and restared the nic card was recognized that even if the lights are on when I joined cable ethernet an atheist. I installed the drivers but nothing has worked. Why this is happening and what can do? Thanks in advance.

    You are the very welcome.

    You have the small factor form (SFF) or convertible minitower (CMT)?

    Electrical supplies and the form factor of the audio and video cards must be flat with low profile brackets if you have a LTS. Power supply power is also less than a SFF in a CMT.

    I have a dc7800 CMT. I installed a very nice video fanless AMD Radeon 6570 1 GB card in mine and I love it.

    I have installed a sound card, but I guess you could do it.

    I don't know how that everything affects the audio settings in the BIOS.

    Most video cards are the HDMI audio chips on board, and those disable the integrated audio system. He must therefore go back into the BIOS and enable the onboard audio setting.

    It's so everyone guess what happens when you add a new sound card. It neutralizes the again integrated audio system (which would be nice in this case), it neutralizes the HDMI audio (not a problem if you never Hang PC via an HDMI cable)?

    In any case, if you want a sound card, you can get a card PCI or PCIe one that there is a PCIe location in the dc7800.

    If you have a Mini PC, I would not recommend add both a video card and audio, because that can overload the 240W P/S.

    Paul

  • Media center does not recognize the unencrypted HD channels

    I'm trying to record live TV of TV that gets its strings by simply using the power (without decoder) coaxial cable. When I set up WMC, choosing the selection of regular (analog) cable packages it offers, I get all my channels except 5 or 6 unencrypted HD channels that offers my firmware. What are the channels that appear on my TV as fractional as channels 116.2, 117.2, etc.. I really want to record these HD channels. Is it possible to add them manually to the WMC?

    Hello MtnGoat,

    Thank you for visiting the Microsoft Answers site.

    You can check that the card TV tuner and model is a compatible TV tuner of QAM.

    In addition, you can check if you are able to view the unencrypted channels when the cable is connected directly to the TV.

    Here is a useful link which includes information on taken TV signals supported by Windows Media Center:

    http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

    For further assistance, you can also post the question to the following Microsoft Web http://thegreenbutton.com/ Windows Media Center Community site.

    I hope this information is useful.

    Thank you

    Mary
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Hpf4135 hp Solution Center does not display the ink level now

    Hi, I used f4135 and hp ink solution if displayed for years, but now I see the white screen. Maybe I removed some drivers slender?

    Hi dimayula,

    Thank you for your answer! Please, try the following solutions:

    1. Uninstall the software. Uninstalling the printer software.
    2. Re-install the software using the printer HP install wizard for Windows.

    Hope it will be useful to you and have a great day!

  • HP Solution Center does not detect that I've added a second printer

    I am running Vista and have the center of solutions HP (latest version) installed and have HP 2575xi connected network.

    HP Solution Center recognizes my HP 2575 x, and everything works.

    But now I have an extra F4280 HP I want to add in via the USB port on the computer.

    First I tried to install it just just pilots F4280, hoping that the HP Solution Center would detect the new printer, but it didn't.

    Then, I tried the "Full Install" from the installation disk supplied with the F4280. But he determined that I already have all the software installed, so it didn't install anything.

    Center of HP solutions certainly looks like he can handle multiple printers (it has the tabs at the top). But I can't seem to recognize the new printer.

    I could try to uninstall and reinstall. But I'm worried that HP Solution Center does not detect the 2575xi since it is a network printer.

    How can I know the HP Solution Center to detect and add my new printer?

    Thank you.

    When you install the F4280 software, and it is said that the latest version of the software is already installed, then it should give you an option to 'add a device', no?

  • Lenovo T420 3.2.002 Solution Center does not display tile system

    Hello

    I have a T420 running Windows 10 with CSL 3.2.002 injstalled. The Solution Center does not show the System tab, and so I can't do anything with it. Any suggestions?

    Yes,

    Lenovo came out with updates and the latest version of the Solution Center (3.0.0.3 from the website) and 3.0.0.4 upgrade all issues resolved.

    Hope this helps.

    See you soon,.

Maybe you are looking for