HP Stream 13: missing red light on windows button mute 8

Similar Questions

• Pavilion x 360 S128nr 13: 13-S128nr audio controls Pavilion x 360 stuck with button mute indicator light turned on

  Just opened the box for a HP Pavillion 360 13-s128nr x. I turned it on and after execution by the installation, the light on the button mute was turned on and the volume indicator screen persists above all windows to the muted level. If I try to increase the level of the speaker, he quickly (but not instantly) decreases down to 0. I have tried to uninstall/reinstall the audio drivers, updated the bios and resetting windows with no joy.

  I'd appreciate any help.

  EDIT: I just noticed that the touchpad does not work also. I wonder if it is related.

  EDIT: If I kill Explorer in the Task Manager, the problem goes away. Explorer to check the cause of the problem come back.

  Support do me a full system restore. The problem persisted, so he returned.

• HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

  Hello
  
  I have a HP Z620 workstation.

  My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

  I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

  I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)
  
  My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)
  
  Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

  With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

  My problem:

  1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

  2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

  3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

  4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

  Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

  Thanks in advance for your time.

  MR. J.

  Juggerknight,

  Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

  In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

• Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  1. Impossibile to "start Windows because the following file is missing or damaged. Windows system32 config system

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else.

  If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• My optical mouse 3000 does not work even if the red light is on in the background

  My optical mouse 3000 does not work even if the red light is on in the background

  Hi Russell,

  Thank you to contact Microsoft Community and we will be happy to help you with your concern.

  According to the description, it looks like you are facing a problem with the optical mouse 3000.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?
  3 is confined with any specific application?

  I suggest you to see the steps in the following Microsoft article.

  
  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

  Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

  We would be more than happy to help you if the steps above did not solve the problem.

• Fill the cartridges of ink on deskjet 9800. Red light flashing, won't print. Always worked before.

  Your Question: I haven't found new, original HP cartridges for my deskjet 9800 in any store. I so did my ink on deskjet 9800 as I did with success several times in the past. Two red lights keep flashing. It won't print. [Someone suggested that I need a new print head?] What should do? thanx

  The coding strip only should be cleaned if there is a problem - it is very fragile and can be damaged, making the printer inoperable.  There is a post here that describes how do to clean the MICR band, but respect the warnings and don't do it unless necessary.  There is also a post here that shows how to solve one of the problems mishandling can cause.  Do not clean the Strip unless necessary.

  The coding is the band one located just behind the stem of transport semi-claire. It aims to help the print cartridge faithfully keep track of its position as it moves along the stem of transport. Sometimes dust, ink or oil can accumulate on this strip and cause the following problems:

  • Prints "stairs" to the bottom of the left margin of the self-test page.
  • The margins left or right of the self-test are not properly placed.
  • Ink cartridges carriage slams on the left side of the printer.
  • Automatic test double-print or obscured shows the letters.
  • Defects to flow the length of a printed page (portrait orientation), or on the whole page (landscape orientation).
  • Printing stops and the lights of the Control Panel on the printer indicate an error.
  • Gaps appear in the printed text or images.
  • Slow printing

  CAUTION:

  Do not clean the strip of coding for the following symptoms: media pick questions, paper jam tilt, ink cartridge, missing points or rejection white stripes with printing and smeared or streaked black ink.

   

• BlackBerry Blackberry Storm Smartphones - does not light (red light)

  Hi all

  Recently, I dug my Blackberry Storm out of his box and tried to use it again. Unfortunately, it not light.

  I can plug it into my computer (Mac) and the red light comes on. He will stay on until I open the Blackberry Desktop Manager how the phone starts a cycle of rebooting. Every now and then it stops on a symbol of the battery with a slash through it (are there no battery in the phone), but the second, I try to connect to it via the Blackberry software it restarts again.

  I tried the JML encoder or whatever his program called and every time it tries to connect to the phone, the phone restarts.

  This is as far as I know:

  Carrier: Verizon

  Phone: Blackberry Storm (to 2008)

  Computer: Mac

  Program: Blackberry Desktop Software 2.4.0 (Build 17)

  My phone is out of warranty and since he began to send me in trouble in 2009 I switched to Android. I've never had a problem with Android, so I forgot to go back and see what was wrong with my Blackberry. I hope someone can help out me. I can't really 'take to verizon' because their solution is swap out today just for a working one, but since it's out of contract. / warranty, they will tell you simply throw me. I live in Los Angeles, perhaps someone someone actually knows phones Blackberry of PATCHES. I know it's a new idea.

  Thanks, I hope someone can help!

  In your situation, a 507 is actually a good thing... 507 means that the BB has no OS installed in it, but at least it turn on now.

  I don't know how do to recover it through MAC... all of the stuff I know applies to the PC. You might find some MAC-specific help in our MAC-specific forum:

  • supportforums.BlackBerry.com/T5/Desktop-Software-for-Mac/BD-p/blackberryformac

  Everything what I've heard, none of the stuff to get over this is for MAC, so if you have access to a Windows PC, you can perform the following procedure, which removes as "automatic" search/download OS that fails on your MAC and replace it with what you control:

  1) uninstall all the BB OS packages from your PC,

  (2) make sure you have the BB Desktop Software already installed

  • http://us.BlackBerry.com/apps-software/desktop/?lid=us:BBsoftwareesktopSoftware & Cal = us: bbsoftware

  (3) download and install to your PC, the BB OS package you want:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  4) remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  (5) run the Desktop software and connect your BB... the software should offer the operating system package you have installed on your PC. If, during the process, your BB votre BB a '507' error, simply unplug the power cord of the BB USB and reinsert it. do nothing else... This should allow the installation to continue.

  You may also use these tips:

  • KB10144 How to force detect the BlackBerry smartphone using the Application Loader
  • KB27956 How to recover a BlackBerry smartphone from any State
  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  Good luck and let us know!

• BlackBerry Smartphones more than reminders red light flashing

  Hello again:

  New owner of the 9000 "BOLD".

  You have another question for you experts.

  I couldn't find a place where I could tell the phone to remind me to audibly of missed calls, emails pending and waiting for text messages.  The red light blinks, but I was wondering if there was a way to make the beep of the machine so that I could be alerted waiting/lack points...?

  Thanks in advance for any help.

  Kind regards

  -d.

  Check this one

  http://www.handango.com/catalog/ProductDetails.jsp?StoreID=2218&PlatformID=40&ProductID=199266&_requ...

• BlackBerry Smartphones Double flashing red light after failed update - can not turn on!

  Hello! When I installed my BB Desktop Manager and connect for the first time in my Bold 9700, he asked if I'd like to update various features on my phone, to which I agreed. The update froze - I do not altogether during that stage, but I remember that it is in the stages end as well as the scene in which he froze began with the JVM. After waiting an hour or two, I have disconnected my Blackberry, not knowing what to do. The screen stays black and the red light starts flashing.

  I looked up the fixes for the problem and they seemed a JL_Cmdr used to do a full wipe - simple - but I am on Windows 7 and it is not compatible. I get a brief command prompt screen for half a second before it closed.

  The second difficulty involved using the command prompt to get the charger in the AppLoader file - but I ran into another problem when trying to open Loader.exe, I have one "the Application Loader requires Blackberry device manager to install.

  Then raising THAT fix, I downloaded a new OS and redownloaded the Desktop Manager, but I get the same error.

  It's really depressing. Any advice or assistance would be greatly appreciated.

  Hi and welcome to the Forums!

  JL_CMDR works fine in Win7. Don't launch from the file Explorer. Instead, open a command box (start > run > CMD). Then browse (just like in the BACK) where it is and run it from the command line.

• I have no sound coming out of my macbook pro and see a red light in the hole of the listener.

  I do not have its coming out of my macbook pro os x 10.8.1 but if an earphone is connected I hear the sound and there is a red light through the matter of earphone. What is happening to you can help me?

  The red light of the headset jack means the MacBook Pro thinking that an optical audio cable is plugged into the port. Try to have disconnected and reconnected a headphone plug into the port several times. There is a tiny sensor inside the port that determines if the port is operating in analog or optical mode. Something similar by plugging should trigger the sensor and restore the analog signal.

  If you don't feel capable in doing so the folks at Apple Genius Bar will be able to help.

• Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Try resetting your preferences. Organize your Opt - Cmd launches the application. Post screen shots of what you see.

• keep the red light of the research of e-mail messages

  Just red light will not stop looking for e-mail messages, despite the fact, I set the preferences to search E-MAIL when I'm trying to find something on my Mac. What is happening with this?

  MacbookPro, mid2010,

  with the help of el Capitan (but in fact, this has been a problem in previous versions as well and I'm just fed up with it once again)

  don't know why she filled in saying I'm on the Mavericks. have updated to El Capitan

• USB HDD TRAY 1, 5 t: = red light drive lights works very slowly

  Hello

  It is brand new USB STORE 1, 5 t 3.5 "disk.

  Drive normally begins with the red light, initialize and move to blue light. Initially drive works slow - flashing blue when something happens.

  ... but after a few minutes of use, red light may turn on a moment (for e.g. when new folder is created or some files are copied - then drive works very slowly - it appears when you copy).

  After a few seconds, record going to the blue back light - and everything is OK until the switch next to the red.

  1 is this normal behavior?
  2. What is the meaning of red light when the drive is working?

  Thank you in advance.

  Hello

  I m no owner of this HARD but I have a theory.
  According to your information, I think that the red light only appears if data would be written to the HARD disk.
  The blue light appears during the reading of data from the HARD drive.

  Welcome them

• How compaq 8200: my computer is blinking a red light permanently four times and do not start

  My computer is blinking a red light permanently four times and do not start

  @Crownwise

  Laptops.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01732674

  Desktop computers.

  http://support.HP.com/us-en/document/bph07107

  REO

• 8 5901 stream: Call 8 5901 with 10 windows workflow?

  Hello world

  It is possible to make calls from the Stream 8-5901 tablet with windows OS 10.

  There is a phone app for windows 10?

  Thank you

  Hello MarvinCar,

  PC Windows do not have the ability to work as a phone. While that based on windows phones available, they are built differently than an ordinary PC.

  8 Stream is considered to be a Windows PC regular and has not the capacity of the cell phone.

  It can use Skype for phone calls, but which requires an internet connection, a paid subscription and works differently.

  Hope that answers your question.