HP Support Assistant - defragmenting a SSD?

Similar Questions

• HP Support Assistant Defragent disk running 16 hours and counting...

  I bought this HP Pavilion P6755 (Windows 7 64-bit) about two months and it is a great machine to use.  However later I had on two occasions has experienced a blue screen, I thought I could used the pre-installed HP Support Assistant to try to improve the performance of the machine.  Then I started the update and he passed smoothly up to the part of Microsft Windows Disk defragment, where trotted as always...

  I tried twice, the first run, I let it go for about 14 hours with no luck. the second time I let the process of development for more than 24 hours and when I came back to check it was still marching tune-up?

  I closed this update to half way and started the window of defragmentation tool, and it took less than half an hour to complete the process without any problem at all.

  So what is happening with this update under Hp Support Assistant?

  I have ensured that the Windows 7 operating system has the latest updates, HP Support Assistant in its latest version.

  Another thing so: HP ProBook I use at wwork completes the process of development without problem at all.

  Anyone here has the same problem?

  My PC has i5 and 1 TB hard drive; I used the HP Support Assistant to perform a check of the HARD drive and that you did not no problem either.

  Thanks for any input or possible solution.

  Hello
  Welcome to the HP Forum!

  I recommend that you update the HP Support Assistant. Go on the web portal of support for your office and in the software & Drivers section find the update, download and install it. I would have linked directly to the update for you, but you left the last alphanumeric (s) for your office product name identifier.

  

  Kind regards
  ERICO

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• Windows disk defragement works do not with hp support assistant

  HP Pavilion d6-3225dx windows 7

  Hello
   
  Try the following
   
  Firstly, uninstall your current version of HP Support Assistant by opening windows control panel, open programs and features, make the entry for HP Support Assistant right click and select uninstall.  Once this process is complete, restart the laptop.
   
  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html
   
  After installation, restart the laptop.
   
  Kind regards
   
  DP - K

• DV6-7214 dead with PLAYER MSATA C after hp support assistant, new bios update. 18/05/13

  I've postponed an update of the bios, because it makes me nervous. Apparently for good reason.

  Today, I let the horse do the update of bios on my win8 race dv6-7214.

  He said he was doing a system restore point, but that seems to have been unnecessary.

  The laptop has a black screen after an hour of "reboot", so I've turned off.

  Turn on the screen remains black.

  No response to any prerssed keys after power, as the ESC key.

  I have read several messages that need to roll back updates of bios, which does not say much for HP regarding

  that it is a recurring problem.

  I do NOT get a blue screen, getting not nothing at all.

  Is there a way to roll back a short bios to ship to HP?

  I did not write down the version of the bios, just trust it was necessary. Don't let hp support assistant to run anything else.

  I guess that I will uninstall HP support assistant, if I never recover my computer to the point where it can turn on.

  Can not think of a software bug as bad as loaded by hp in my bios.

  Anyone? How do I reset the bios with a completely insensitive laptop?

  Thank you chryig, but none that did not work.

  HP support has sent the same solution.

  The dv6-7214 has an msata slot, which can be configured as C drive, I did with an msata ssd.

  The drive that came with the laptop was in the sata slot, as usual, but was not C drive.

  I found someone announcement the same problem, no black screen, (not blue screen) no error message, just in bricks.

  There is also a disc SSD C.

  I tried to temporarily move the msata on slot sata (with an adapter). This allowed the bios end

  its update.

  So it's not the Bios that is broken, but the software to perform the update to the bios is broken.

  Update (bios) fails if drive C is anywhere but the sata slot (or perhaps the c drive should be drive 0).

  I hope that HP will fix this problem. A lot of laptops HP is sold 'improved' with an extra via disk

  value added reseller. Since there are only 2 slots under that drive C may be in, sata and 1 msata

  should be possible to update the bios software to manage this small number of possibilities.

• HP - 870-01 desktop PC OMEN: problems HP Support Assistant

  It s related to the HP Support Assistant software.

  I have 8 elements of updates waiting to be included in the system.

  When I have chosen some of them and I push DOWNLOAD & INSTALL, the software begins with the first, open a new screen and works fine until the download of the element is started and it seems that there is an eternal loop and never progress bar to proceed. After a few minutes, I need to stop the process. Because of this, I have a lot of pending updates.

  I will need help, please.

  Thank you.

  By.

  Sistema 10 64-bit Windows Home. CPU Intel Core i7 6700 K @ 4.00 GHz sky Lake 14nm technology.

  16, 0GO double-channel RAM.

  Placa base HP 2B4B (U3E1).

  Grafica SMBX2231 (1920x1080@60Hz) forced to Ge NVIDIA GTX 970.

  Storage:

  238GB SanDisk (SSD)

  931 GB Seagate (SATA).

  Unidades opticas Hp DVD - RW HLDS.

  Audio Realtek High Definition Audio.

  Thank you for the information, @Pacoqui.

  I think everything should be good.  When there are updates available you should receive a notification the same as in the past.

• HP Support Assistant update problem

  HP Pavilion dv6-2155dx laptop

  Windows 7 operating system

  .

  I was up later than usual night and the computer was always after midnight. It is usually out before this date. I think that the HP Support Assistant has been programmed to do a tune-up once every two months to 23:00 or 12: 00 but did not a update for a long time because I turn off the computer before the scheduled time.

  .

  The HP Support Assistant started a tune-up as expected but is still running. In my view, it has begun on 28/07/2012.

  HP Support Assistant says "Tune up underway". Happened for several days and don't quit. Until today, he said it as to defragment my hard drive.

  How can I stop and see the results. TS?  All I can find is a list with checkmarks.  There is a red X with the line that indicates.

  Help, please. Thank you

  Cyndi

  {Information}

  Hello

  Unit stop will cause any damage to your device. You can uninstall HP Support Assistant, and reinstall the battery pack closing does not work.

• HP Support Assistant and update my system istaation

  Hello

  I had a problem I'm trying to check the updates for my laptop HP Clubhouse I try intsaller as the function to scan my PC but it will not allow me to install it I receive a message "HP Solutions Framework Service Support Service. Cannot start veryfy that you have sufficient ptivilages to start system services. I had all the time this message that I run only as an administrator and my computer, the firewall settings are fine and also should I buy something in use of the command that the function Scan Naw?

  http://h20614.www2.HP.com/ediags/GMD/install.aspx?LC=en&cc=us&product=5182508

  The question of another that I had I have more HP Support Assistant doing there anyway I could get it back in computer of mine and I don't have the CD of Manufactuer

  http://support.HP.com/us-en/document/c01916574

  Hi Milena123,

  OK, so I suggest that you do the defragmentation using the Windows operating system, since all but the PC Tune Up works.

  Here are the steps for Defragging under Windows 7.  Ways to improve your computer's performance.

  I hope this helps, keep me posted.

• iPad, Safari froze and was told that I had to call apple for support assistance.

  My iPad Safari froze and was told that I had to call apple for support assistance.  I called and gave the last four digits of my serial number of the iPad.  They wanted me to download app and pay money, but it felt weird, so I hung up. Am I or my systems compromised in any way by calling and giving the serial number or hang up in time that nothing should be affected?

  Do this...

  Tap Settings > Safari and then slide down and tap clear history & data website, then reboot your iPad.

  The number they gave you is not Apple.

  Never give any personal data abroad on the net, including serial numbers.

• HP laptop - 15-ay011nr: HP Support Assistant suggests an incompatible update to my system

  Hello

  HP Support Assistant suggested three updates for my system.

  When you try to download the wizard, all of the facilities have not (a phenomenon that has been described by some other posters in this forum).

  So, I looked for each three updates directly in the HP site, after finding my computer and the operating system (HP for computer laptop 15-ay011nr, 10 64-bit Windows).

  I have found two of the updates, but not the third, called: "Intel WLAN for Micorsoft Windows", with Softpaq number SP76133, version 18.40.0.9Pp2, if it is relevant.

  When I reviewed this softpaq number in the site, I have found, but saw that it's only for windows 7 and 8.

  Why the HP support assistant that suggest an update for my system win 10?

  Am I supposed to download it?

  If not, is there a way to stop the support Wizard to think that I should install it?

  Thank you!

  Eitan

  Hey there! @Eitan_L, thank you for visiting the Forums from the HP Support!

  I understand that HP support assistant is to give false information.

  I suggest you uninstall all components of HP support assistant programs in Control Panel.

  Restart your PC and reinstall the latest version of HP support assistant from this link: http://hp.care/2ezPyyk

  After installation please try to check the updates and see if you still have the same problem.

  Please let me know the results!

  Have a great day!

• Pavilion HPE-414sc: HP Support Assistant does not connect to the HP Server

  HP Support Assistant does not connect to the HP Server. Do not download messages and updates of definition. Does not collect configuration information. Does not scan my system. Does not prepare the action list.

  I installed Windows 10 once again. After installing HP Support Assistant work.

• HP Support Assistant does not - SOLVED

  Hi all. My Assistant Support HP just upgraded to the new and does not work to search for updates at all. He goes on to say that he will search for drivers on - such and such date, then then I'll watch, and he will have a new date and said its never been updated. When I click Refresh, he said 'shutdown. Please wait... »

  When left alone for a minute he uses almost HALF of my computer resources, then I kill the process such that it does not show its actually nothing.

  I tried to reinstall the old, only of him have updated to the new one anyway... Any ideas would be greatly appreciated.

  HP-DV6929WM. Intel Core i7-26630QM. 6 GB OF RAM. 750 GB hard drive.

  Hello

  Try the following

  Firstly, uninstall your current version of HP Support Assistant using Microsoft 'Fixit' at the following link: this is particularly useful for correcting problems that may prevent resettlement on the machines running a 64 bit OS.

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  When this has completed, restart the laptop.

  Then download and install the latest version of HP Support Assistant of the page on the link below - the download links are to the bottom of the page.

  http://h18021.www1.HP.com/helpandsupport/HP-support-Assistant.html

  After installation, restart the computer again.

  Kind regards

  DP - K

• HP Pavilion 500 series: I get a message saying that you have pending updates for Hp Support Assistant over and over again

  HI a little while back I upgraded to anniversary Windows 10 update things went well for me I keep hp Support Assistant on my desktop in the process of updating Windows 10 anniversary.  Finally, I decided one day to check hp Support Assistant to ensure that I had the lastestet version.  I went into Hp Support Assistant and clicked on about and clicked on the button for the latest version control, then a window is come in saying I had pending updates for Hp Support Assistant I would like to apply or not.  I pushed on the Yes button.  After the download and install updates and hp support Assistant stops and tempary files are deled then hp support Assistant will restart and return to the start page.  Everything seems to work fine download with green and white checkmarks circles with the categories above.

  I guesss I am asking for help it is because for days and days now when I go to HP support Assistant and click search the latest version that I get this message, you have pending updates for the support of hp Assistant you would like to apply or not.  I would now like to how pending updates will I have to ask a support Assistant hp until I don't see updates are available for the support of hp Assistant.

  Here is some information that might be helpful below:

  HP Supportt Assistant program file version: 16.101.7752

  How can I ensure that I have the latest version of the Support Wizard on my desktop computer.

  HP Support Assistant: 8.3.34.7

  Patch: 8.3.34.7

  Framework: 12.5.32.37

  Configuration files: 8.0.6294.2155

  Let me now is how easyier I could apply all updates waiting for the support of hp Assistant for Windows 10 home Edition 64-bit operating system.

  Thanks for your time and your help.

  @funny35,

  I'm glad that I could be useful,

  To help others looking for the same solution, please click on the tab "accepted solution".
  
  I thank you for your time and have a nice day!
  
  Kind regards

• How can I remove the HP Support Assistant of my taskbar icon?

  The point mark icon appears after the last update on my Windows 7 desktop.  How can I get rid of him?

  Right-click on the taskbar, go to toolbars, and then uncheck the HP Support Assistant quick access.

• HP Envy Phoenix h9 - 1420t: Support Assistant will be not updated

  Computer model: HP Envy Phoenix h9 - 1420t

  OS: Win 8.1 Pro 64-bit

  HP Support Assistant

  Version: 8.3.27.17

  Framework: 12.5.26.37

  Since the upgrade to the latest version of the Support Assistant, I am unable to check the updates. The program has successfully completed phase "connect to HP servers", but then fails (x-watch gray instead of green check mark) to complete the remaining steps:

  • Download messages and updates of definition
  • Gathering configuration information
  • Scan your system
  • Preparation of the list of actions

  Any suggestions on arises at work?

  The steps I've tried: uninstallation with Revouninstaller, resettlement, reset

  @troubleshoot411, welcome to the forum.

  I agree with using Revo.  This is my go to app for malware.  When you used Revo, you use the advanced option?  This will not only remove the program from the HARD disk, but it removes remnants of the BIOS.  If this is not the case, this could be the problem.  I suggest to try the advanced option to remove HPSA and shut down the computer.  Then, start and reinstall HPSA here.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.