HP Support Assistant has stopped working after the installation of the HP-Helper to check network

My computer model: HP Pavilion SlimLine s5-1160 desktop with Windows 7 64 - bit Media Center

While I was away from my computer this morning installed HP HP network check Helper. When I got home there was a message that I needed to restart the computer. After reboot, I got the same message. After trying several times, I have disabled assistance program using Add-on management, but the message from computer restart guard appearing. When I tried to open HP Support Assistant it opens, but instead, the restart popped up message. In the HP Setup Manager Wizard, I clicked on help, then launch support assistant and received... the message to reboot. If I open HP help and Support Windows and click "Contact assistance (Get in touch with someone at HP)" I get... the message to reboot. I have re-installed HP Support Assistant with the latest version on the HP Web site. After the computer restarts, I have... the message to reboot.

Thus, the computer always tells me that I need to reboot, HP Support Assistant does not open and I can not get HP support number to call by clicking "contact support (Get in touch with someone at HP). Does anyone know a number I can call to "Get in touch with someone at HP?

Thank you.

Sorry, you encounter the problem with your PC.

If you have not been able to contact HP, but here is the number:

800-474-6836 (800 HP invent)

Tags: HP Desktops

Similar Questions

  • HP support Assistant has stopped working windows 8.1

    I use HP Pavilion 14-n059tx Notebook PC and upgrade to windows 8.1. I can't use HP Support Assistant. It says "HP Support Assistant has stopped working". Please give me the correct steps to uninstall and reinstall HPSA including the file to download.

    Hi MNFNaimem,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop and have the HP Support Assistant. Here is a link to uninstall the HP Support Assistant software. You can reinstall it here.

    I hope this helps.

    Thank you.

  • HP Support Assistant has stopped working

    HP ENVY Phoenix h9 - 1420t CTO desktop PC

    8.1 Windows Pro w/Media Center - 64 bit

    For some unknown reason, HP Support Assistant has stopped working. I noticed that the large taskbar icon had disappeared.

    I tried to run the program just out of curiosity. "HP Support Assistant has stopped working. A problem caused the blocking of the program works properly... "etc. It is reproducible. The program does not start.

    So, I tried to uninstall in Control Panel of. It seems to start to uninstall, but then I get an error message. "Error 1316 a network error occurred trying to read the file C:\windows\Installer\HP support Assistant.msi" when I click "OK" it cancels. This is also reproducible.

    I tried to download the software again from HP: sp64126.exe I accept the license agreement and moving forward. I get a message that files already exist and I want to overwrite all or not. Matter of INo I choose, nothing happens. The installation window simply disappears and I'm at square one.

    Windows is fully updated. I use Norton Intertent security 21 - fully implemented to date.

    I solved this on my own. HP has a Recovery Manager installed on my system [search---> Recovery Manager] and aid that allowed me to reinstall just this software from my hard drive recovery partition. Very cool!

  • HDTV display has stopped working after the installation of El Capitan

    After the upgrade to El Capitan, the already functional and unproblematic mirroring the display of my iMac OSX for Panasonic HD TV has stopped communicating and the TV screen is blank! There is no options available when you select Preferences / display. No settings have been changed for Mac or TV before too, or after the upgrade!

    Hello Macthewife,

    Thank you for using communities of Apple Support.

    I see after update to El Capitan, you have problems mirroring to a HD TV. I suggest the following article to ensure that it is configured correctly and in the "Get help" section, there are a few suggestions if this does not work properly after installation.

    Use AirPlay to view a video of your Mac on a HDTV

    Best regards.

  • Get error "ggsci.exe has stopped working" after the upgrade of OGG 12.1.2.0.0

    Hi gurus of the Oracle,.

    I'm testing the OGG Version 11.2.1.0.19 to 12.1.2.0.0 upgrade. But after upgrade, I am getting below error while trying to access ggsci.exe

    ggsci.exe has stopped working

    If followed the steps (GoldenGate 12.1.2.0 Install/Upgrade on OEL 6.4 x 86-64 |) Blog of Maaz Anjum)

    1. stop all processes Ogg

    2. has taken the old OGG home backup

    3. call the YES program and gave the location of the OGG existing House 11 G

    4. once the upgrade has completed, I tried to access the ggsci.exe but by mistake. Setting error image.

    GGSCI_ERROR.JPG

    If someone has solved this problem. Please help me.

    Best regards

    Jamsher Khan

    I strongly suggest to talk to support.

  • Illustrator CC has stopped working (after the last update)...

    Hello

    I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

    Any help please? Thank you.

    --

    Windows 8, Version 6.3 (Build 9600)

    Name of the failing application: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

    Name of the failed module: Illustrator.exe, version: 18.1.0.430, time stamp: 0x54247b91

    Exception code: 0xc0000005

    Offset: 0x000000000013920a

    Process ID vulnerabilities: 0x3d8

    Start time of application vulnerabilities: 0x01cfe32da5a29313

    The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

    Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

    Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

    Faulting full name of the package:

    Hi Sumit,

    Thanks for your quick response.

    No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

    Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

    I'll install the Wacom tablet program later. I suspect that it will be fine.

    Thank you.

  • Message "Windows Explorer has stopped working" after the opening of the "Images".

    Hello.
    I have Windows Vista 32 - bit home basic OS with SP2.
    When I open "Images", I get a message saying "Windows Explorer has stopped working" with an option to restart the program, which just closes. The details of the message are:

    Signature of the problem:
    Problem event name: InPageError
    Error state code: c0000185
    Type of media loopholes: 00000003
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Information additional 01:40 d 4
    More information 2: 4062ad41ec8067256aa4c5e2b56d3c79
    Information additional 03:40 d 4
    Additional information 4: 4062ad41ec8067256aa4c5e2b56d3c7

    This error message comes just out of nowhere I do not install anything or make updates when this issue was raised. I tried to restart the computer, but it did not help.

    I checked for viruses, but none came.

    Then, I tried to do system restore, but it could not solve the problem.

    In addition, I used the command line to find the problem and found a few corrupted files, it has been unable to remedy.

    Details of SFC are:

    «2010-11-17 11:38:44, Member's file Info CSI 00000160 [SR] cannot repair [01:24 {12}] "settings.ini" in the sidebar of Microsoft Windows, Version 6.0.6002.18005, pA = Process_Architecture_Intel <0>...» »
    and there is more like that, but I don't know how to copy and paste these messages.

    I don't know what to do from here.

    I don't want to reinstall all of Vista. In addition, Vista is PREINSTALLED on my computer.

    Oh and I am not an expert in using the command prompt,-j' found how to do this in other forums.

    Please help on how to solve this problem.

    Thank you!

    Hello

    Norton search spyware however your question may be caused by or to the less aggravated
    by Norton.

    Norton/Symantec is known to cause strange problems and aggravate others. Better is to uninstall
    for a test by simply disabling will still allow pieces of it to install. Uninstall it and run the Norton
    Removal tool to avoid problems causing leftovers being left behind. The following recommendations
    to use when testing, even better all the time.

    List of tools to clean/uninstall anti-malware programs
    http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

    Norton Removal Tool
    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20080710133834EN&LN=en_US

    ------------------------------

    Here's what I use and recommend: (these are all free and very effective versions.)

    Avast and Prevx proved extremely reliable and compatible with all I have
    launched on them. Microsoft Security Essentials and Prevx have also proven to be very
    reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.

    Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
    Operation of the network.

    Prevx - Home - free

    Windows Firewall

    Windows Defender (is not necessary if you use MSE)

    Protected IE - mode

    IE 8 - SmartScreen filter WE (IE 7 phishing filter)

    I also IE always start with asset if filter InPrivate IE 8.
    (It may temporarily turn off with the little icon to the left of the + bottom
    right of IE)

    Two versions of Avast are available 5.x and 4.8 x

    Avast - home - free - 5.x stop shields you do not use (except files, Web, network, &)
    Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
    Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
    Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
    disabled - click OK
    http://www.avast.com/free-antivirus-download

    Avast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
    and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
    Finish those you don't use).
    http://www.avast.com/free-antivirus-download#TAB4

    Or use Microsoft Security Essentials - free
    http://www.Microsoft.com/Security_Essentials/

    Prevx works well alongside MSE or Avast

    Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
    programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
    or use Google to see how to remove.
    http://www.prevx.com/   <-->
    http://info.prevx.com/downloadcsi.asp  <-->

    PCmag - Prevx - Editor's choice
    http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

    Also get Malwarebytes - free - use as scanner only. If you ever think malware and that
    would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
    (not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
    never find anything of note that I started to use this configuration.

    http://www.Malwarebytes.org/

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Error: Arcsoft Connect Daemon has stopped working after the expiration of the trial of Arcsoft.

    Original title: get rid of a software box that says (Arcsoft Connect Daemon has stopped working). Keep on appearing__on from my laptop. ___

    My laptop, age 6 to 7 months running Windows 7, it came with Arcsoft requests to make greeting cards, albums Scrapbook etc.on a 6 month trial I have not tried.2 weeks ago, this box appeared - to the trial period is up and keeps popping up whenever I turned on my PC. I thought uninstall these software will solve the problem, but I was told 'the Installshield engine could not be started. Without this interface taken in charge. I then tried "recovery" back to a point of restoration 2 weeks ago. However, recovery was completed without success due to an error. I repeated the process with a week of 3 restore point but also failed. I think that MS calls this Appcrash.The next step would be to advanced recovery, but I'm not sufficiently confident to do it and the problem is only the latter.

    Hello
     
    ArcSoft is a suite of programs to support management. ArcSoft Connect is used to connect online (updates, new goodies etc.). It would be strange if you "Connect" without any of their products, then you want to uninstall those first, if they exist
     
    In order to eliminate that your computer allows you to try these methods.
     
    Method 1:
     
    If it is installed in C:\Program Files, you can uninstall using programs and features.
     
    Do follow the link provided below.
     
    Try disabling Services "ArcSoft Connect Daemon" service before you start.
     
    To do that you must follow these steps:
     
    1. click on the Start button.
    2. type services.msc in the search field.
    3. now, look for the "ArcSoft Connect Daemon" service and right-click on it and select Disable.
    Now, restart the computer and check if the problem is resolved.
     
    Method 3:
     
    If the method above doesn't resolve the problem, you can try to download the Windows install cleanup and install it on your computer and try to remove the arcsoft program and check the issue.
     
    For this you need to follow the links below.
     
    Description of the Windows Installer CleanUp utility
    http://support.Microsoft.com/kb/290301
     
    For cleaning and installation you can go to the link mentioned below:
     
    http://support.Microsoft.com/kb/923100
     
    Add this link to download the Windows install cleanup:
     
    http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My documents and downloads are coded, and now the HP Support Assistant has stopped working

    First my 'docs' have been encrypted, now my downloads are encrypted and the "Support HP sat down. ' 'stopped working', when I try to open it, it is"encrypted", the '

    Recovery Manager"is also encrypted. Message is: 'looking', but do not get a reply box to tell me what the problem is.  Now I'm so frustrated!

    Help, please!

    Carolyn

    Hi Carolyn,

    1. what operating system is installed on your computer?

    2. have you made any recent hardware or exchange of software on your computer before the show?

    3. you receive an error code or message?

    4. what exactly happens when you try to open my documents and file downloads?

    5. have you well any type of encryption, or if you are aware of what it is done on your computer?

    What version of the operating system Windows am I running? :

    http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

    Please follow the steps and the link:

    Method 1:

    Decryption of a file:

    1. Right click on the file you want to decrypt, and then click Properties.
    2. Click Advanced.
    3. Click to uncheck the checkbox encrypt content to secure data to decrypt the data.
    4. Click OK to close the Advanced attributes dialog.
    5. Click OK to close the Properties dialog box.
    6. If the folder contains files that it contains, the confirm attribute changes dialog box appears. You can choose to decrypt only the folder. But it will decrypt all the files currently contained in the file.

      If you want to decrypt the contents of this folder, click apply changes to this folder, subfolders and files, and click OK , then check the issue.

    If you are still having the same problem, follow the next method.

    Method 2:

    I suggest to start your computer in safe mode with network and run Microsoft Safety Scanner because it might be an unwanted virus.

    Step 1:

    Start your computer in safe mode with network and check the number: http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    Step 2:

    Scan your computer by using the Microsoft Security Scanner by clicking Download now:

    http://www.microsoftsafetyscanner.com/

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope this helps.

  • Time travel has stopped working after the upgrade to watch OS 3

    Hi all
    Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

    Thank you
    Ray

    Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

  • WordPad has stopped working after the latest updates

    After that received several updates this morning, Word Pad stop working. When I open it, I get an error message saying... "unable to create the new document.

    Can someone tell me how to solve this problem? It was working fine just before the updates.

    Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

    Please download and share with everyone your event to your OneDrive Viewer Application copies of your System and logs and post a link here.

    To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

    For assistance OneDrive see paragraph 9.3:
    http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

    General remarks on event viewer
    http://www.gerryscomputertips.co.UK/syserrors5.htm

  • Outlook 2010 has stopped working after the installation of updates

    10/11/2015 my system (Windows 7 Ultimate) undertook an update of 15 files.

    After the reboot, I started Outlook 2010 and found that he had stopped working.

    I have tried several things to correct, but none worked.

    I did a system restore to remove all updates and Outlook now works.

    One of these updates has a problem with Outlook, but I don't know which.

    I need help please.

    After you have uninstalled Outlook KB3097877 works very well.

    It has something to do with emails with HTML links in them.

  • Weather app has stopped working after the recent update of store

    Recent update of the store windows caused the app to stop working.  It shows the current weather, but when you try to access the application that need you right back to the start page.  I also noted the presence even when app stich (Evernote) also recently installed II, he returns to the start screen and does not open.

    Hello

    We appreciate that you gave us an opportunity to answer the question that applications do not work after you have installed the Windows Update.

    Please follow the steps and check if that helps.

    Method 1: Run App troubleshooting utility.

    Download and run the troubleshooter modern UI App and check.

    http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

    Method 2: I suggest you try the steps from the following link:
    What to do if you have problems with a soft

    http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

    Method 3: check the Date & time zone.
    Follow these steps to change the time.
    a. double-click the current time on the lower right of your screen.
    b. then click time change date, and then click change time zone.
    c. Select your time zone and check automatically adjust the clock for the time, then press OK.
    d. press on apply, then OK.

    Method 4: check if you have the same attention to clean boot.

    Please see the link to place the computer in a clean boot.

    http://support.Microsoft.com/kb/929135

    Please note: after troubleshooting, be sure to start your computer in normal mode by following step 3.

    I hope this helps. Please get back to us if you have any other questions. We are here to help you.

  • HP Pavilion 500 series: HP support assistant has stopped working on windows 10

    I have redownloaded Assistant HP several times since the installation of windows 10; It works twice, maybe, then he said: stopped working-new HP and nouveau1 assistant what is the problem with that?

    Please advise!

    The first thing you need to do is to completely uninstall HPSA.  Then, use the version appropriate for your computer listed here.

    I suggest to use Revo Uninstaller to remove HPSA.  It will remove the HARD disk as well as all the remains of the BIOS.  I use the FREE version.  The advanced option is best to remove the entire application.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • BlackBerry Z10 Print to Go has stopped working after the installation of KB2992611 on Windows 7 for x 64 system

    A large number of reviews and safety notice associated Microsoft updates showed in place on November 11, 2014 that were installed. Subsequently several failures that happened after the reboot (i.e. IE would freeze at start-up, Print to Go

    the stoppage of work - has indicated that there is no connection to the Internet, the PrintToGoLog.txt had much more detail).

    Other users of similar problem after a reported BB playbook KB2992611 updates has been applied,

    After KB2992611 (a security update for Windows 7 for x 64 system) has been uninstalled, Print To Go was working properly. Unfortunately, it is still not. Firefox is OK.

    Thanks for the info, this will help others with the same question.

    That KB was for all windows systems, but was mainly for Win Vista business.

    You can reset IE in Internet properties, program tab, or download another or do a system restore to November 10.

    Firefox is not affected because it is not incorporated in the system as IE.

Maybe you are looking for

  • toolbar bookmarks, works not updated properly after v. 12.0

    Bookmarks Toolbar does not appear whenever I have first to open the browser. There is a space for it, but no icons are there. The only thing that works for me right now is to go "View > toolbars, uncheck bookmarks toolbar, then pull it back & re-chec

  • [SOLVED] Y580 - unable to connect to Wi - Fi

    http://i.imgur.com/MD6awJ2.jpg Here's what it looks like. Yesterday it worked fine, I turned off the computer laptop, is released, he lit the morning and bam, no internet. I reinstalled the drivers, then reinstalled the system, and nothing has change

  • Satellite C850 lights with battery power

    Hello My computer toshiba laptop Satellite C850 lights with battery. It works fine when connected with AC power... !!When it is connected with AC power, it shows that my battery is fully charged.

  • G72-B60US notebook computer touchpad scroll bar

    Hello. I have through most of these postings & can't find anything related to my problem. On the touchpad I sometimes get this tiny scroll bar. It is very annoying & I would like to get rid of him. Is it possible to do & if so how? I can't describe w

  • I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error?

    I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error? This is the summary of errors: AppName: explorer.exe AppVer: 6.0.2900.5512 > ModName: ModVer shellext.dll: 4.0.468.0 Offset: 0000ca 93 Please hel