HP Touchpad ~ how to install the new battery?

Similar Questions

• PC Pavilion laptop: no sound on Pavilion g6 after installing the new battery CMOS

  I have a Pavilion g6z - 1 d 00 CTO Notebook PC, model A2F43AV number.  It came with Windows 7 Home Premium, and I upgraded the operating system to Windows 7 Pro (64 bit).

  The problem is that I did not sound, either through headphones or the speakers even if the Volume is set at 55. I first noticed the audio problem after replacing the CMOS battery, as the laptop is 4 years old and he gave me intermittent wireless connectivity problems.  After installing the new battery CMOS, I noticed the wireless driver was missing and downloaded/installed.  Everything was fine except the audio.  Then I reset the BIOS but nothing there as the BIOS version is v.49, and it is the most recent.

  I have also downloaded/installed the driver audio and rebooted the PC.  Still, there is no noise.

  Finally, I have checked the audio drivers and the reporting system they work without any problem.

  What should I do next?

  Thanks, Terry

  @Terry57

  Thanks for the reply,

  I was under the impression that these links would take you to guide step by step, however, it seems that they do not work,

  However, I have provided details below:

  To perform a hard reset on a computer equipped with a removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  5. Remove the battery from the compartment to batteries.

  6. Press and hold button power for about 15 seconds, remove any residual electric charge capacitors that protect memory.

  7. Insert the battery and plug the power adapter into the laptop, but do not connect peripheral devices.

  8. Press the power button to turn on the computer.

  9. If a boot menu appears, use the arrow keys to select start Windows normally and then press the Enter key.

  10. After you have reconnected each peripheral device, run Windows Update and HP Support Assistant to update all device drivers.

  To perform a hard reset on a computer equipped with a sealed or non-removable battery, follow these steps:

  1. Turn off the computer.

  2. Remove the computer from the docking station or port replicator.

  3. Disconnect all external devices from devices such as USB, external displays storage devices and printers.

  4. Disconnect the power adapter from the computer.

  To perform a system recovery, this link should work: click here

  Keep me posted for any technical assistance,

  Kind regards

• charge battery after installing the new battery does not exist

  I use Windows 7 Ultimate Spk1 32 bit on my laptop (big mistake)
  I recently installed a new battery & put it through the cycles of preparation 3 times following the instructions.
  The next time he went down to the alarm of low level newly together and I added the power adapter, nothing happened, the battery wouldn't charge.
  After many attempts to do nothing improved load, especially my temper.
  They advised me to install another battery which I just did, and this SECOND new battery just sits there & will not charge either.
  When he arrived he had 10% fresh rate showing so I removed the AC adapter and let him draw 8%, but when I replaced the adapter he had served on 8% & does not load.
  What is going on? How a simple thing like recharging simply disappears. ?
  Does anyone have a solution for this problem?

  See you soon
  Geoff

  The charging circuit inside the laptop and recharges the battery while the laptop is plugged into the mains. If the load circuit does not have the laptop is running on a charged battery or the power cable, but won't charge the battery.  The fact that the machine failed to load two new and old battery suggests the charging circuit has failed.

• I use two different versions of Firefox for two different employers - how to install the new version without losing an old?

  An employer requires that I use Firefox 3. The other requires that I use the most recent version. How to install a new version of Firefox to another path without overwriting the old version?

  The best way to have a version be an installation of Firefox Portable. The mobile facility is autonomous and will not affect your installation of Firefox "ordinary".
  
  http://PortableApps.com/apps/Internet/firefox_portable

  Otherwise, you will need to set up a profile specifically for version 2 and make sure the correct profile is launched in each version.
  
  http://support.Mozilla.com/en-us/KB/managing+profiles
  
  http://KB.mozillazine.org/Shortcut_to_a_specific_profile

  Overall, you are probably best to replace your current version of Firefox 3.6.25 with Portable Apps - http://portableapps.com/apps/internet/firefox_portable/localization#legacy36 - version and install Firefox 9.0.1 that your installation "regular".

• How to install the new BBM blackBerry smartphones

  I tried to find a way to install the new BBM 5.0, but can't seem to understand. I am new to the blackberry world (3 days) and I got an old 8703e that is now configured on my line of personal relationships.

  So I've updated the software (desktop and blackberry), but it said that my BBM is updated to 4.2.1

  I'm on the outskirts of Bell to the Canada and can't do no matter how hard I try. If I go on blackberry Appworld, it cannot be downloaded any other way except by browser, which I don't have, I have only the email and BBM on my Blackberry. Am I stuck without internet for browse and locate this program?

  To use install and use BlackBerry Messenger v.5:

  • A data plan from your wireless service provider
  • A smart phone BlackBerry with 64 MB of memory
  • 2.4 MB of memory available smartphone
  • BlackBerry® Device Software v4.5 or later version

• How to install the new NIC in ESX 4 without having to rebuild?

  I have a server ESX 4.0 (u1) running with a NIC card double port gig.

  I need to replace the network adapter with a quad port NIC dual port.

  I prefer to install the new NIC card and do not have to reinstall ESX for her to see the map.

  Can you give me any advice or point me to the documentation that describes how to do this?

  Thank you for your help.

  If the new NETWORK adapter is on the HCL, simply turn off and install the card NETWORK. No reinstallation is required.

  Supported Community, community rewarded - do questions answered and allocation of points for the job of marking. It helps us all.

• How to install the new software Adobe Reader after the latest version of misinstalled?

  Hello, community. May you have a great day.

  My question is this. Latest version of Adobe Reader in my PC has been X MUI, and he has been installed from an external drive G. For this reason, I could not uninstall this version before trying to install the new version 11. And I have to delete it manually delete it is the main folder of my Applications folder. It's all I can not install the new version.

  Thank you now for your attention. Rafe Dominguez, Villahermosa, Mexico.

  Hello Rafe,

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Satellite 5205-S505 - how to install the new OS after replacing HARD drive

  Hello.

  Installed a new hard drive. How to install an operating system?

  I thank.

  Hello

  You have a Toshiba Recovery disk?
  If so, then start on this disc.
  The installation process should start automatically and you must follow the instructions on the screen.

  If you n t have such recovery disc, then you will need to use a Microsoft Windows disk in order to install the operating system.

  Satellite 5205-S505 is a series of laptop Toshiba us and old drivers can be found on the Toshiba U.S. driver page:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

• How to install the new motherboard in my XP computer?

  I need to install a motherboard in my computer, because there is a visual memory card small is 95.0 MB and I use my computer for gaming and I need a new motherboard because there is no slot for graphics card graphics card is integrated and I don't have $400 - $800 to spend on a new computer that I was hoping that some on help me and if you can it would be greatly appreciated thanks.

  * original title - anyone know how to install a motherboard? *

  Hello

  See the bottom of the article that contains information about the replacement of the motherboard.
  How to replace the motherboard on a computer that is running Windows Server 2003, Windows XP or Windows 2000
  http://support.Microsoft.com/kb/824125
  Before replacing the motherboard I recommend you back up the data on the hard drive.

  How to use Backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista
  http://support.Microsoft.com/kb/309340
  After replacing the motherboard, you'll have to do a upgrade on the spot to boot to the desktop.

• How to install the new HDD on Satellite M70?

  Hi, I have a Satellite M70 PSM75E, I want to move a hard drive of 250 GB, can give me instructions how to install and what type of disk HARD inface do I go?
  Your help is appreciated

  Hello

  It is difficult to say if the 500 GB will work in this good old classic... I think that 250GB should be sufficient for all applications you want to install.

  However, you could try the 500 GB. If it doesn t work you can bring back to your computer store or you can test it directly in the shop. Then you'll know if it of an option for you or not. Be creative! ;)

• How to install the new BIOS for Satellite Pro M50 under Ubuntu

  I am running Ubuntu on my M50 Pro. Could someone advise me what is the latest BIOS and how to install it?

  The update of the BIOS here site seems havean exe file but I couldn't see the BIOS file to the breast?

  Thank you

  Why do you want to update the BIOS?
  You have any big trouble with your laptop?

  The European driver Toshiba page provides BIOS BIOS for Vista and XP.
  Both versions of the BIOS must be completed while the operating system is running!

  If you use Linux on your laptop, you will not be able to update the BIOS!
  Do you understand?

  Once again; Updated the BIOS should be carried out ONLY if it of absolutely necessary. In other cases don't update!

• How to install the new hard drive on PowerMac G5

  How it installs a new hard drive on PowerMac G5?

  I have a number of readers of the previous Mac that can fit in this PowerMac G5, but I don't know what - if anything - is necessary to make them fit. Or guides, assistance would be appreciated.  Thank you!

  You need a 3.5-inch SATA drive. Concerning how to swap the drives you can use these instructions to fixit. You can skip step 4 that this plastic cover does not need to be removed. https://www.iFixit.com/Guide/Power+Mac+G5+hard+drive+replacement/1952

• How to install the new media player

  My media player has messed up, when it plays music, it does not play regular songs for some reason, it's playing as they are a type of mixed song. I can solve this problem?  Or should I just re - install a new version?

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Uncheck Windows Media Player

  Click OK

  Restart when prompted

  Click Start, type toggle windows feature tour

  Press enter

  Extend the functionality of media

  Check Windows Media Player

  Click OK

  Restart when prompted

  Try to play again.

  If the problem persists:

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

• How to install the new power supply?

  OK firstly plug...

  Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

  PC: HP p6703w

  new power supply: GS600

  new game card: evga gtx460

  OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

  The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

  Thank you.

  Welcome to the HP Forum!

  ricofico wrote:

  OK firstly plug...

  Motherboard (motherboard): N-Alvorix-RS880-formfat (Alvorix)

  PC: HP p6703w

  new power supply: GS600

  new game card: evga gtx460

  OK I am experianced abit but still novice when they treat the upgrade myself. So here's my question...

  The mobo has a slot for 24pin power cable, but the current 250w ps uses a 20 pin in this slot. Is it safe for me to use all 24 pins for the ps (GS600) I want to? What was the reason why hp has used a 20 pins on this mobo? I don't want to fry my mobo. Laughing out loud.

  Thank you.

  It is safe for you to install the connector 24 pin. You are miscounting the pins on your motherboards ATX connector. The following image is your motherboard. I count 24 pins. Product specifications for your PC State that the PSU is ATX spec.

  

  Kind regards
  ERICO

• CS 5.5 does not appear in the purchased programs? How to install the new computer?

  I recently bought a new computer and I would like to transfer all my CS5.5 programs to the new machine. I disabled the already on the old machine. However, when I go to MyAdobe to upload them to the new computer, nothing shows up as available for download. Where are my programs and how can I access them?

  Hello

  Please Download CS5.5 products

  Kind regards

  Sheena