HP TouchPad is completely dead

Similar Questions

• Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Hi, I just upgraded my 4s to 9.3.2 and now it is completely dead and will not start. Had no problem with any other previous updates.

  Sorted now

• What is my iphone 5 completely dead?

  A few days ago, while I was at school, my iphone 5 stops completely. It 'didn' t show it must be loaded, the screen was black just plane. I tried to recharge it for a day, nothing... Tried to hold the buttons home and lock for 10 seconds, 30 seconds, 1 minute - absolutely no response. Does this mean that my iphone 5 is completely dead? The phone is about 2-3 years of age, but the battery has been replaced half a year ago.

  Start here

  If your iPhone, iPad or iPod touch won't turn on - Apple Support

  You say that the battery has been replaced recently. This procedure was performed by a genius bar Apple retail Store or a retailer Apple iPhone service provider or by a repair of alley (note the emphasis placed on the iPhone)

• Satellite Pro A120 is now completely dead

  I have a Pro A120, which has not been used for a few months, but is now completely dead.
  There are no lights on it at all. I bought a new power adapter, but still nothing.
  Can anyone suggest anything to check/replace or did it. It worked fine the last time I used it.

  Hello

  Remove the battery and unplug the AC adapter.
  Wait 1 hour or more and then reconnect the two parts.
  Then try again to power the unit.

  If that does not help, check out the RAM modules.
  Remove a module and test the device with a RAM module.

  If that does not help, then you should get in touch with a local computer technician laptop because he feels as a serious problem of material

• Satellite M70 - LCD display is completely dead

  Hello

  I have SatelLite pro M70 PSM76E and I it has following problem
  When I try to turn on, LCD is completely dead. I have connected the CRT and it seems to start ok but when it goes to windows it freezes and restarts after a few seconds.
  I think this is not problem with OS because when I use the recovery CD and knoppix cd LCD screen is always black. Maybe that's the problem with the graphics card or motherboard.

  I do not have a manual to disassemble to clean my M70 inside.

  I would find myself solution before going to the service.

  All ideas,

  Concerning
  Wuwik

  If you get an image on the external monitor, but not on the internal, it sounds like a failure of inverter FL. It controls the backlight of the screen and must be replaced.

  I recommend you contact an ASP in your country. They can disassemble the laptop and exchange the part. I m sure they will help you.

• Satellite L50 - B - 14 M completely dead - no power not on

  Hi all

  I am now the proud owner of a Toshiba Satellite L50 B 14 M, since a few days it serves not on at all. When it is pressed the button at the top right (even for al longer) nothing happens, not even a little noise or a flash of light. He remains completely dead and will not turn on at all. Haven't tried with adapter connected / not connected / without battery still no change. The laptop was not abandoned or in a hurry or anything strange I just pressed the power button to continue working on it.

  Tips / advice is much appreciated! Best regards, Jan

  Hello

  It's really not easy to say what may be wrong with that. Unplug the AC adapter / CC, remove the battery and press the power button for about 20 seconds. After doing this leave for a while and connect the power supply only.

  DC in / battery indicator lit?
  What happens when you press the button walk / stop? Is there a reaction?

• My I Pad has gone completely dead. It is a model and just completely dead tw vertion. Anyone has an explanation please

  My I Pad has gone completely dead. It is a version2model and just completely dead. Anyone has an explanation please! I turned on and off and the top (or at least gone through the process) charged no sign of life at all. ???

  How long have you leave the charge for the iPad? It will take at least 30 minutes on the charger before an iPad with a completely dead battery react. Be sure to use the charger supplied with the iPad, or its equivalent. Do not recharge an iPad by connecting it to a USB port on the computer. After 30 minutes on the charger to reset the iPad. Press and hold the Home button and the sleep/wake button until the Apple logo appears. Then release the button and let the appliance restarts. You lose no data by doing this. It's like a restart of the computer.

  If the unit still doesn't start not to make an appointment at an Apple store to have a technician look at your device. Or contact the Apple Support.

• My Equium is completely dead because of the update of the BIOS

  I just tried to update my bios, computer shuts down automatically after 5 minutes and now it is completely dead

  Sorry, but you must contact the Service in your country. They can help you.

  I'm afraid there is nothing you can do. :(

• Smartphones blackBerry 8310 completely dead on upgrade

  Please I need immediate emergency assistance. While the upgrade of my 8310 I got failed error message say to reconnect to JVM and now my BB is completely dead with a starnge sign on it 'Box Rectangle with a circle with a transverse line and 507 written below'. Thanks for the immediate support

  This error means that there is no software installed on your handheld device. Simply download and install the new software on your PC then BlackBerry device via a USB cable. This will solve the problem.

• Touchpad has completely stopped working

  Hey, my touchpad completely stopped working. I tried to download the driver and restart and the stuff, but nothing seems to work. There was formerly an icon for it down to the right on the toolbar, but that's even more here, it's like the software so that it just doesn't even exist anymore.

  Can anyone suggest a solution please?
  Thank you

  Hello!

  You can disable and enable the touchpad with FN + F9. Select this check box, because maybe it s disabled.

  Have you tested an external mouse? You have the same problem with it?

  Good bye

• Wouldn't Satellite A200 completely dead, no AC adapter / CC tested and work lights

  Hello

  A few days ago, that my screen went, ordered an lcd inverter and using an external monitor in the meantime.
  But now the whole machine is dead. When I plug in AC adapter / CC have not even lights to show power.
  I tested the AC adapter and works very well.

  Can someone please tell me what could be wrong, maybe what part do I replace to make it work again.

  Hi Grega200,

  Have you ever tried this FAQ document?
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work I think you need professional help from a service provider allowed. Maybe your motherboard needs to be replaced or else because it looks like a hardware problem.

  On the Toshiba site, you can find a list of ASP.

  Good luck! ;)

• Re: Satellite A300 is completely dead

  Hello!

  A few hours ago my Satellite 300 (2 years and 2 months - no warranty left) suddenly exploded with a strange noise and now it s dead. When I press the power button, nothing happens. Really nothing. No light, no sound, nothing. With battery, withour battery, with power, without being able to...

  West really didn't give any sign of life.

  What could be the problem? What can I do? Help, please.

  Thanx

  Hello

  It seems that the motherboard dead, there is nothing to do as a contact for Service.

• Touchpad and trackpoint dead with 1.17 on Linux bios

  Hello!

  I have a laptop of E460, on which I am dual booting Windows 10 Pro and Manjaro Linux (mainly Arch Linux) with the kernel Linux 4.5.2.

  Having the same problem as people discuss in the thread E460 keys repeat when 3 seconds , I've been banging my bios to 1.13, 1.16 and yesterday, 1.17 bios, to see if the problem had been solved.

  With the 1.17 bios update, my touchpad and trackpoint stopped working under Linux (Windows they work fine). They do not yet appear in/dev/input, and there is no mention of one of them in dmesg, journalctl, /var/log/Xorg.0.log or anywhere.

  The touchpad and stick worked fine in the bios 1.13 and 1.16, so I think that there is a regression in 1.17.

  Everyone knows this? Can Lenovo, if there is a problem?

  Have you tried to reset the default BIOS settings? Then try again.

• I got a new Sport iWatch for my birthday at the end of November. I followed the start of instructions for synchronization with my iPhone. Nothing happened. The iWatch battery was completely dead. Is this normal with a new show?

  The battery on my new iWatch was dead when I opened the box. Is this normal? The watch seems to work now after that I gave her a load.

  Hello

  The battery on Apple Watch charge will reduce over time, even when it is off.

  It is possible that your watch has been stored for a while before you received it as a gift. Your communities of Apple Support profile indicates that your watch has watch OS installed 1.0.1. This version of the software was released in may 2015 and was followed in September 2015 watch OS 2.0.

  For all the latest features and best performance, update your iPhone and Apple Watch for the latest versions of software (currently 9.2 and watch OS 2.1 iOS). The software update instructions are available here:

  - Update the iOS on your iPhone, iPad or iPod touch - Apple Support software

  - Update the software on your Apple Watch - Apple Support

  More information on the workload of your watch:

  Check your battery and load your Apple Watch - Apple Support

• completely dead touchscreen and pen input tm2t

  I have a laptop (2100) aged 2 weeks of tm2t and his touch is quite dead...

  I have reinstalled the operating system...

  bios update

  updated graphics drivers

  update of wacom drivers

  After doing all of these things as his does not work... someone can help me pls...

  Here are the photos I took wen I open my laptop
  as noted by 2 screws are lower rubber
  and the third screw is as shown on the picture below
  I removed the screws 3 on the picture

  

  There will be 4 screws that hold the LCD screen
  I have removed the screws and took a pic...
  

  .. Unscrew them and gently lift the LCD screen.

  

  Here is an end to the top of the connecting wire...
  

  HP knows that this kind of connector gives the problem, they had put a Ribbon on this connector...
  I removed the tape, pushed the cable to the connector and put the same band that was already show...

  

  Boot the system and the touchscreen made, perfectly functional