HP Touchsmart 320-1030 does not turn on

Product: HP Touchsmart 320-1030

Product #: QP788AA #ABA

OS: Windows 7-64 bit

Bought the: 07/11/2011

Problem occurred: 21/06/2013

My HP Touchsmart has worked almost flawlessly for a year and a half, until today when I tried it alarm off mode 'sleep'. Once I tried to move my mouse to turn it on, I heard a noise of high tone from the battery under my desk. At this point, I realized that the computer was not turn on and the battery LED blinking, as if to tell me that there is some sort of error. Well my sister has the same exact model I computer and I tried with his battery and it worked, but when I tried battery and power cord with mine it did not work.

I know that there must be an internal problem now. I tried held in the power button for 5 sec, 30 sec, and even 2 minutes before plug it and try to turn it on, but in any case, it failed. I removed the rear case and removed the small battery inside and then reinserted it but not good, and finally I tried to delete the hard drive insert it again, but not luck. It's very upsetting, but I'm hanging there in the hopes of restoring my PC; any advice or help is greatly appreciated!

Inside of the black rectangular box containing the power supply for your PC that there is no battery inside.

The box with wires connecting your PC to the power of the House is called a power adapter.  Inside the power adapter, there is a transformer, diodes and a control circuit current voltage\. It's what made sure the power to your PC is what it takes.

A flashing led on the power adapter indicates a malfunction of the power supply or the motherboard of the PC adapter.

You have all other USB devices that the mouse or keyboard connected to your PC when you try to start it? If the answer is Yes, then disconnect devices.

Was there recently a lightning storm or power outage at your home?

Best regards
ERICO

Tags: HP Desktops

Similar Questions

  • HP Touchsmart 320-1030 touchscreen does not work after update

    Hello, I bought a hp touchsmart 320-1030 pre loaded with windows 8 and once I took the free update Windows 8.1 my audio driver and pilot of the touchscreen went. I managed to get a driver of his work, but I can't understand this touch screen problem. In my view, there is no windows 8.1 drivers but I can't find a driver for windws 8 either. What should I do?

    I resolved, uninstalled my current driver then rebooted and it works now all of a sudden! Thanks for the reply anyway

  • TouchSmart 320-1030: Touchsmart 320: Wi - Fi card white?

    Ralink stock on my Touchsmart 320-1030 all-in-One wifi card constantly abandons the wireless connection, and I would like to replace it with another card.

    Does anyone know if BIOS 320 uses "white list", in which case you can only install certain wi - fi cards? I know that HP laptops are notoious for this, but I'm not sure of their all-in-one.

    You should be able to replace the card wireless without any problem.  Before you do that, though, here's a guide that can help you solve your problem.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • TouchSmart 320-1030 the bios has been updated to manage an AMD A8 - 3870 K Quad Core 3.0 GHz unlocked APU

    AMD A8 - 3870K Quad Core unlocked 3.0GHz APU, Socket FM1, 4 Mb L2 Cache, 32nm (AD3870WNGXBOX) 100W

    Has been updated the bios to manage this APU?

    Thank you

    Brad

    No BIOS updates to the still for your 320-1030 TS, based on 'Software downloads & Driver for HP TouchSmart 320-1030 desktop'. Do not expect to see an update that supports a CPU "unlocked" as HP does not generally support this configuration.

  • When I turn my iphone sideway, the video does not turn sideway

    When I watch the video on my iphone, I usually turn my iphone sideway, the video would turn sideways to get the most out of the video. But now it does not turn sideways.  Try to find the adjustment to set the option or the recent updated version this video sideway option removed.

    Swipe up from the bottom of the screen to get to the control center. Press on the icon of a padlock on the right side until it becomes black. If the icon is white, the screen rotation is locked.

  • Toshiba Camileo P10 does not turn

    I have a toshiba camileo p10. The problem is that the camera does not turn. I tried to recharge the battery, but the red light blinks for hours.

    I tried without the battery and the charger plugged but nothing happened. I cleaned the contacts.
    All solutions?

    Have you removed the battery AND the AC adapter?
    Try this. The two parties should be removed/disconnected.
    Leave the camcorder for some time (a few hours). Press and hold button power 30 sec long. After this plug in the battery and charger.
    Wait until the battery has been charged and then try to turn on the cam by pressing the power button.

    Good luck buddy.

  • Toshiba 46HL900A does not turn on

    My TV turns completely. The Red led will turn from red to green, but the TV does not turn on? Someone knows why? Thank you

    Hardware problem might be serious... to be honest, that you have some many options troubleshooting...
    If its material of serious malfunctions, only an authorized technician would be able to help you.

  • camera does not turn on

    I tried to load camera after death, it does not at all, but the orange light is on when it is plugged, let it charge all night and still it won't turn. I videos I would like back, please help.

    The charge indicator lights orange when the charging starts. It seems that the battery is charged. Try to turn on the camera while loading and check if it is turn on.

    Note: The charging light turns off, charging is completed.

    If the camera does not turn ON even when the load is in progress, the service is required.

    You can initiate the service from the link below:

    https://eService.Sony.com/

    You can also contact our telephone support or Chat to try additional troubleshooting procedures.

    http://eSupport.Sony.com/us/p/select-System.pl?Director=contact

    Please provide model # exact camera while contacting support, so that they provide accurate information. You can locate model # on the back panel and it will start with the letters MHS.

    If my post answered your question, please mark it as "acceptable Solution".

  • Satellite PRO U300 does not turn off

    Hello

    I am facing a problem for the last few days on my Satellite PRO U - 300 (31st PSU)...

    The machine does not turn off and the power light stays on (blue LED) even after you have disabled. In fact, happened 3 - 4 times when I start the computer normally by pressing the power button / stop, it does not start and I noticed that the indicator was not extinguished even after + shut down +. Like any it is blocked! I have to finally, remove and reinsert the battery to start the laptop.

    Some details of my pc are as under:

    Version of the OS Microsoft® Windows Vista Business 6.0.6001 Service Pack 1
    BIOS Version V2.00
    Processor Intel (r) Core (TM) 2 Duo CPU T7100 @ 1.80 GHz

    Can someone help me solve this problem. Is it possible that during the uninstallation of programs, any perticular driver file is also deleted?
    Thank you

    JITENDRA

    Hello

    I don't know that you understand the indicator of power, but to me it sounds like AC Power LED and this LED is always on when the laptop is connected to the power supply.

    Power on / off LED is probably what you mean (the other starting on the left).
    Anyway, you turn off your laptop using a standard on the Start button?
    Are you sure you want to use the Hibernate mode.

    Believe me, the entire description here is pretty confusing to me. It may be that the laptop is turned OFF but power light is still on.

    Have you installed something 4 days ago? Or deleted some important application?
    Sorry, but it is not easy to say with certainty what the problem is here.

  • Pavilion 15-e020tx: does not turn off pc portable hp pavilion 15-e020tx

    Hello.
    I have a pc hp laptop pavilion 15-e020tx. It does not turn off and does not wake up mode 'sleep'...

    I tried to restore my laptop to factory setting, updated everything I can, but it still does not work
    Could someone help me please

    Update the BIOS to the current version. A F.24. The direct link to the download is below.

    http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69897.exe

  • Does not turn my Iphone 6? /

    I own an iPhone 6 and I have for a year now. I turned off my phone a few hours ago and went to turn it back to the and it does not work. The apple logo appears, but the screen turns off after 5 to 10 seconds of the projected apple logo. I tried pressing the two keys and I also tried to connect my phone to itunes but it doesn't connect either.

    Press the sleep/wake and home buttons and keep them for at least 10 seconds.

    If this is not enough, take a look at these articles Support from Apple:

    If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

    Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

    As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

    More info here:https://support.apple.com/en-us/HT201263

    If these steps do not work, contact Apple and ask for help.

    https://www.Apple.com/support/iPhone/contact/

  • printer does not turn on

    My Deskjet 6980 printer has stopped working.  It has worked very well so far. Flashing lights said he needs ink. I put in the new ink. Now, it won't turn. The power supply is turned on, the works of output (without surge protector), but the printer does not turn on. In all he has no light on the printer, except light power cord in the back. I tried everything I could find online, but nothing works. My computer was still recording the printer, but since it will not power, says that it is in offline mode. Any suggestions would be helpful.

    The unit may have developed a power failure, but may be also simply in a State of error because of the fresh cartridges.  There are a few steps, I'll try in this case of troubleshooting.

    * If possible, try to remove the cartridges that you recently installed before performing a hard reset of the printer.

    * Hard reset of the printer by unplugging the device, disconnect the other end of the power cord from the wall outlet, separates the power cord of the power supply, wait 30 seconds and plug it back up.

    See also the steps described in the document, found here, to solve a lack of power.  I hope this helps.

  • L50D-B-146 satellite does not turn

    Hello

    I have a problem with my L50D-B-146 turns is not on. Very rarely, when I try to turn it on it works. Once I managed to turn on I tried to upgrade the Bios to 1.6 1.2, but you must restart your computer to complete the installation I couldn't because it does not turn on 99% of the time. The laptop didn't work before I tried upgrading the Bios is not the fault of the installation to fail. Also when I get to turn Windows works perfectly fine, until I have to turn it off again.

    When I try to turn it on the power button light works and you can hear the fan, otherwise you may not even see the screen Toshiba Leading Innovation, so I don't think it's the fault of the window. I repeat again once you can activate from time to time, but very rarely. Also it is not the fault of the monitor that I connected the laptop to an external display, and again, there was a problem.

    I would be very grateful for any solution to this problem

    The solution to this problem?
    I don't know if anyone here can offer virtual diagnosis and offer the working solution.
    When the machine works sometimes such a problem is not easy to understand. Such behavior of the laptop must be analyzed and may be tested with diagnostic tools.

    What we do here, it's just to speculate at what may be the problem. Looks like the BIOS related issue. For some reason, from time to time your machine cannot pass the BIOS checking the material.

    Have you already contacted Toshiba services and asked for help?

  • Re: Satellite L750 does not turn on - LED flashes

    Hi guys,.

    Can someone help me please!
    I just bought a laptop Toshiba Satellite L750 last week and it won't turn :(

    The wing forward system indicator is flashing but I'm not sure wat it is: P
    Nûby - I know, but its all new to me.

    Also my lappy does not turn and stop automatically last night in the middle of using it.

    The fan seems to be surging so:(meh son seul nouveau... s'il vous plaît aider!!!)
    Karma

    Hello

    If the LED flashes then a serious hardware problem has been detected on the motherboard.
    I think that the guarantee must be valid because L750 model isn't very old so don t time in bulk and get in touch with the Toshiba ASP in your country.
    Guys should help you for free if the warranty is valid.

    For me it doesn't look like a main part (motherboard) need a replacement.

  • A Wi - Fi connection does not turn off correctly

    When I turn off Wi - Fi in the quick toggle or settings page it does not turn off and it is left running. (I have not 'analysis always' either) I can see in the graph of the battery when I turn it off for a while it always shows the green bar on Wi - Fi. I had this problem on 5.1 on my 4g (2013) g bike and I don't always.

    This seems to be a matter of google - I have it on non-Moto phones as well. The only thing to do is to restart with the Wifi turned off.

    I don't remember if disable the Wifi in the precision of the GPS solves this problem or not. I decided to live with it for now.

Maybe you are looking for

  • What is your workflow to support?

    I lurked on this community of support for a bit, and I have a bit of a background of tech support, so I thought I would try my hand at helping people to. By prowling, I saw a certain names coming over and over again, and I was wondering 'workflows' q

  • How to fix a corrupt installation?

    When I upgraded Firefox 21 to 23 and launched firefox, froze the process of 'the addon compatibility check' and I had to kill him. At the launch of firefox, it is obvious he is severely damaged. Clicking on just about anything in the menu it will cau

  • I am unable to pay online to two accounts - suddenly - have months... what has changed and how can I fix?

    Pay your bills online. I suddenly can't pay them through Mozilla, even if I can pay through Explorer. Why has this happened? The two companies say it's my browser.

  • Maximizing the window

    I am trying to run two .vi at the same time, one who reads the voltage with a DMM and another who performs a calibration program. I would like to have the DMM vi visible at any time because I need for calibration. Whenever I run the calibration vi it

  • How do oh high point contest mode Windows 8.1

    How high a contrast in point 8.1 of Windows