HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI

HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI. I have connected the same cable to your laptop and it connects, suggesting that there is a problem with the CV. The TouchSmart has a GeForce GT230 graphics controlled by the control panel NVIDIAnView. By using the system control panel and the control panel NVIDIAnView, I have not been able to locate the Samsung monitor.

I made restarts it etc. also without success. Does anyone have a suggestion that I could follow.

Hello

It is a machine CTO, but have many models of the Touchsmart 600 HIMI IN port series, not OUT port so you can't connect to a TV using HDMI in order to get the picture on the TV.

Kind regards.

Tags: HP Desktops

Similar Questions

  • Headphone Sony 600 MW does not connect with my laptop

    I bought headset MW600 from Sony to help with my laptop.

    My laptop is running Windows 7.

    It shows in the Bluetooth device.

    but when I try to connect my laptop with headset will not connect.

    Hi Mohammad,

    Follow these methods and check if that helps:

    Method 1:

    Make sure that the Bluetooth services are running on the computer. To start the Bluetooth services follow the steps below:

    a. click on start

    b. type Services.msc and press enter

    c. in the list find Bluetooth support services and double click on it.

    d. make sure that the service is set to automatic and started.

    Method 2: try to run the hardware troubleshooter and check whether the problem is resolved or not.

    Open the hardware and devices Troubleshooter

    Method 3:

    Try to run this Microsoft Fixit and see if it helps:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Also try to follow the tutorial video on the links below and check whether the problem is resolved:

    Connect to Bluetooth and other wireless or network devices

    Add a Bluetooth device to your computer

    Change settings for a Bluetooth compatible device

  • NEX - 6 does not connect with Samsung Galaxy 2 Note

    It is a super common problem. The Samsung Galaxy Note 2 (fairly new device) connects with the NEX-6. I'm very savy when it comes to electronics. Yes, I did all the right connection. It's a bug in the software of the Mobile of PlayMemories application. Samsung Galaxy S2 wife connects without a problem. I tried to connect the Note 2 a couple dozen times before I tried the S2. So no, the connection with the S2's not interfereing with Note 2. If you look on Google where the application is downloaded, the user, game store section of you will see it is very common problewm between these two devices. SONY... Please solve this problem and difficulty. This was the main selling point for me on the NEX-6 and now I can't use this feature yet. There are one number of others who are in the same boat who want this problem. Please contact her!

    Hello Drew,

    Welcome to the community of Sony.

    My apologies for the problem of wifi connection to the NEX-PlayMemories Mobile App on Galaxy 2 Note 6.  We forwarded this to our team of engineers for the investigation.  Please provide us with your phone model number and the version of the OS that is located under settings > about phone.

    Kind regards

    Charlie

  • Widows XP does not connect to my network.

    Widows XP does not connect to my network. (wired or wireless) The network is functional and all I can understand is ipsec driver service could not start because the specified file is not found. I tried to reinstall the drivers for my wireless card, an external wireless adapter and plug it directly into the router. It detects the network but will not connect to it.

    This could be caused by a virus.  What application antivirus do you use, and is up to date?

    In particular, see tcpip.sys.

    There are probably several copies of this file on a typical system of Windows XP.  The copy of 'work' found in C:\Windows\system32\drivers with a backup copy in C:\Windows\system32\dllcache.

    You can have additional copies in C:\Windows\$hf_mig$\KB951748\SP3QFE and C:\Windows\$hf_mig$\KB2509553\SP3QFE

    Assuming that your system is up-to-date, the tcpip.sys version should be 5.1.2600.5625.  It should be 353 KB (361 600 bytes).

    You might consider doing a virus scan online with, for example, http://www.eset.com/us/online-scanner/ or download and analysis with the multi-AV tool of David Lipman, which you can find here http://www.multi-av.thespykiller.co.uk/

    I also suggest to download, install, update and equipped with a system full scan with two of these free tools:
    Malwarebytes AntiMalware
    SUPERAntiSpyware

  • App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    App store, Safari and iTunes does not connect to the Internet after installing macOS Sierra

    After upgrade 'OS X El Capitan' to "macOS Sierra" window only empty "App store" and page "Safari" made its appearance, no error message shows. store "iTunes" and "Dictionary" does not connect too.

    But Google chrome works well.

    So have you tried the next steps in your original post that Safari does not work after installing macOS Sierra:

    (1) x OS: "Unable to connect" or "unable to connect to the App Store. An internet connection is required"- Apple Support

    2) Advanced the steps to correct the problems with the iTunes Store - Apple Support connection

  • Messages does not connect to the Yahoo IM account?

    Messages app v9.2, currently works very well with my Google account and iMessage, also worked with my Yahoo Messenger account, but recently (today?) does not connect to it.

    I know that Yahoo has made changes to their Instant Messaging System. This change affected only Messages?

    Hello

    I can't connect either (I didn't realize that I do not use)

    However going on the Yahoo Site and change the password does nothing.

    With the help of their option 'insecure Apps' does nothing no more (there was an email saying I was using access to messaging through an unsafe application - but I have not used their messaging service for a very long time.)

    It does say read more suggests, is not Mail (after OS X 10.9 is OK)

    He does not on access to their e-mail service.

    There is no option in Messages to try to activate disable SSL you can with AIM or Jabber accounts

    I have looked in the help (a little) but still found nothing.

    20:49 Tuesday. October 4, 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • iPhone 5 sec Bluetooth does not connect

    My 5s Bluetooth iphone works fine one day, the next day it does not connect to my Boise, helmet or Fitbit.   My Bluetooth is on, I have it enabled or disabled and you have rebooted my phone.  I have updated to IOS 10.0.2.

    I was able to pair with my ipad.

    Hello

    Try the procedure described in this article to support > get help to connect a Bluetooth device accessory with your iPhone, iPad or iPod touch - Apple Support

  • Bluetooth does not connect on iOS 10 and sierra OS

    I just bought an iphone 7, Apple Watch 2 and I updated my computer to sierra yesterday.

    I wanted to do the auto unlock with my watch, but my phone does not connect to the Mac with bluetooth. He wants to connect and the phone is displayed in the bluetooth settings, it says on my phone to pair if the numbers are the same, and then he "fails to connect. so im lost and I can't use my watch.

    I have reset my watch (by unpairing), iphone (by resetting all settings) and rebooted my computer.

    It seems that the "it just works era" is over for apple.

    If misery loves company, I'm here!  Just posted my new iphone 7 + setting BLUETOOTH is not 'discover' one of my devices (in 2015 Lexus and Bose radio/speakers).  In addition my iPad and iPad air are also not 'discover' devices!  I think that this happened once I installed the latest ios 10.0.2 software on all my devices.  Please reply if you receive some 'advice' from someone in the "know"!  Thank you!

  • I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

    Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

    Turn off the new modem for at least 30 minutes. More is better.

    Perform a hard reset on the AirPort Extreme, then it turned off.

    Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

    After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

    Then, turn on the airport and let it run a few minutes

    Set up AirPort Extreme again

    Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • IMAP e-mail accounts does not connect

    Just recently my iCloud, Gmail and Outlook IMAP accounts does not connect through the app Apple Mail on my MacBook Pro running 10.11.6. I get a popup error message and exclamation points appear next to each account that States the unable to connect to the server application. IPhone & iPad with the same accounts are fine, just my Macbook Pro has this problem. Connection Internet is fine. Suggestions?

    Please read If you cannot send or receive e-mails on your Mac - Apple Support.

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • My UK 6s iPhone does not connect to the network in Germany?

    My UK 6s iPhone does not connect to the network in Germany?

    'The network '? Which network? WiFi or cell phone? And what have you already tried to get connected?

  • After that put 36.0.1 to date, does not connect to internet

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    IQ140 said

    After update, don't be loading not pages. Does not connect to Comcast. Computer restarted from scratch, reset modem and router - nothing works. I tried Safe Mode early, did not work. Internet Explorer works fine. Mail works fine.

    There is no error message when the update has been loaded.

    It is a terrible 'update '! How can I fix it?

    Update: I indeed found firewall was the issue (the first time with updates of Firefox). I tried uninstalling and reinstalling, but that no longer works.
    Then I opened the application window of Norton Security (looking for information of firewall). I don't actually change or click on what to Norton. I decided to try to install again. This time, when I hit "Run" instead of "Save", the small window Norton popped up saying downloading is safe. Then he installed and opens very well.

    It may be a quirk of Norton? Or by choosing run rather than save (and running after registration)?

  • Hello my iPhone 6plus does not connect to the network on the upper left side of the screen it ust say research

    Hello my iphone 6plus does not connect with the network on the upper left side of the screen it say research

    Have you ever tried troubleshooting mentioned in this article?

    If you cannot connect to a cellular network or cellular data - Apple Support

Maybe you are looking for

  • Try to install Windows with Boot Camp 10

    I bought a license key Windows 10 and downloaded the file iso 64-bit and dragged to the desktop. Then I formatted flash drive 64 GB usb, attached to my Macbook Air 11 inches and used as my destination drive. Before that, I saw it. I've ignored, press

  • Satellite A300 PSAJ4e doesn't work if no battery

    I have a toshiba satellite psaj4e. My motherboard (a000032270) recently died so I bought a refurbished. After the installation of the motherboard, I noticed that when it is connected without battery, it won't start.But with the battery, it starts but

  • Unable to connect via IEEE 1394 card reader in Satellite A100-988

    I tried to connect an i Link on my A100 port Compact Flash drive. I'm using a Firewire Extreme of Sandisk drive and the connection with a 4 pin cable 9-pin. Device Manager indicates that the TEXAS INSTRUMENT IEE 1394 CONTROLLER of BUS firewire is ena

  • G2 HP 450: blutooth device not found

    I have trid to install blutooth device driver. When I click in the software, it has begun to install but after sometimes it shows this blutooth device not found. I hardly remember that maybe I uninstall the blutooth Device Manager device. What can I

  • How to open a vi twice and see the 2 facades.

    Hello. I want to put a Sub - VI twice on the block diagram and run them on the same time, showing the 2 front panels. The VI has a certain time-loop inside, because I want to use the paradigm of parallel loops. It does not work, it shows only 1 front