HP Touchsmart 610-1030y: Touchsmart 610-1030y all-in-One (installing the TV tuner card)

Similar Questions

• HP TouchSmart 610-1190f: replace the TV Tuner card AVerMedia HP TouchSmart 610 with SSD PCI-E

  I do not use the TV Tuner card for my HP TouchSmart 610.

  Can I replace the card with a PCI-E SSD?

  Hi @hpts610user,

  These all-in-one computers are not designed to be changed. I'll try not because of space and design.

  Here is a document of things which can be updated LEVEL AND SERVICE of GUIDE. .

  Perhaps looking to put a hard drive hybrid to replace the old hard drive.

  I hope this helps. Please keep me informed of the progress of things.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.

• 23 envy d027c All In One with the card mother Lavaca3-SB IPISB - NK. How to upgrade the video card?

  I have a HP Envy 23 d027c All In One with the card mother Lavaca3-SB (pegatron) IPISB-NK.  It has a PCI slot available for upgrade of the video.  I want to do this.  I intend to use the pc for video processing and maybe a few games.

  How to pass the video?

  What cards are best for this system?

  What has changed in the BIOS or other settings I should do?  How can I get them?

  Thank you

  Art

  The PCIe MXM slot is for HP install graphics cards in some models CTO (configure-to-order). Without the card installed when you purchased the computer, there the fan and radiator bad sets. You will need to buy a graphics card and the heatsink / fan of HP to try to upgrade the GPU in your computer. There is an extensive disassembly involved in this procedure. All-in-One computers have much more in common with laptops than they do with traditional desktop computers.

  Honestly, if you want to do video processing and games... you should get a traditional desktop with enough CPU and GPU for these activities.

  Please click the White Star of KUDOS to show your appreciation

• install the tv tuner to HP ENVY TouchSmart all-in-One 23-d160qd

  I have a HP ENVY TouchSmart all-in-One 23-d160qd that I ordered from hp.  I would like to run ota tv via my pc and use it as a dvr.  Is it possible to add the tuner to my all-in-one, or I have to look for other solutions?  What other options are available?  Thank you

  It is not recommended to install certain devices such as TV Tuners within the unit due to the complexity in their design and the ability to add additional hardware. However, you can use the USB TV Tuners and connect to a USB port and start using it for your needs.

• TouchSmart 300/1210uk all in one PC. HP Advisor freezes

  Greetings. The PC is a little more 2 years and for the last 18 months, whenever I try to access the PC found on HP Advisor the screen just freezes on me. The other 2 features work OK, like all the other features. This utility does nothing but confirm that the PC and all its hardware and software are A-OK.  I'm puzzled. Any help much appreciated. See you soon.

  :-J' I

  Hello

  Try to download and install the latest update for HP Advisor at the following link.

  HP Advisor.

  After the installation is complete, restart the computer.

  Kind regards

  DP - K

• "HP Photosmart all in one single 7510: print greeting cards 5.5x10" on hp photosmart 7510

  "Unable to understand the print size of greeting card size full page stock measure 5.5x10.

  Hi @artdahlink,

  Thank you for joining the Forums of HP Support!

  I noticed that you are unable to print a 5.5 x 10 greeting cards on your HP Photosmart 7510 e-all-in-one printer. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand the frustration you feel. Please see the Specifications of printer for HP Photosmart 7510 e-all-in-one printer series.

  Maps:
  Card type / size chart

  • 3 x 5 Index / 76.2 x 127 mm (3 x 5 in)
  • 4 x 6 inch Index / 101.6 x 152 mm (4 x 6)
  • 5 x 8 Index / 127 x 203.2 mm (5 x 8 in)

  NOTE: According to the specifications, this printer does not accept a 5.5 x 10 (cards).

  There is no guarantee the implementation of a custom paper size to work, however, you can try this method

  • HP printers - creation of custom paper sizes

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• Hp4480 all-in-One install locks won't let XP Home start

  Just bought a 4480 all-in-in-one printer and have significant problems with the installation.  After installation, printer seems to work very well.  Then restart computer and XP don't start, not even in safe mode.  After several attempts and running the diagnostics, it appeared that I had a hard drive problem. So after picking up a new hard drive and spend countless hours rebuild the computer from scratch - (during which time I discovered that my old hard drive works perfectly - and now I own a new 320 g drive)-I have reinstalled the printer with special attention to install steps, moving slowly and deliberately through the process once more be faced with the same situation of Mid-Autumn Festival on the new hard drive.  I am puzzled, baffeled, frustrated and Yes on the point of being angry!

  One of the install I see talk when install hangs - my Setup seems to work very well any electronic errors, not complete, and work - until I reboot and I have stuck.  At least this time I can boot into safe mode and uninstall everything.  Once to uninstall everything is back to normal and I can start again without problem.

  I tried to install the driver database and all, but nothing helps-

  I'm ready to make one more run at it, if someone has a good idea.  If this isn't the case, I will drain the HP printer and all considerations of future purchase HP products.  More frustrating in the present, it's that I'm a shareholder of HP as well!  This kind of thing is not good for business!

  Any help is greatly appreciated.

  Message edited by hpuser4480 on 12/22/2008 06:46

  If the PC freezes even with the printer disconnected or turned off, then the problem CAN BE with the computer itself.
  
  In addition, in some computers, there is an option called "USB Emulation", which is available in the BIOS, and if it is enabled, this may happen. disable this option is safe and has solved the problem several times. so if please refer to your computer documentation and check this option in your BIOS and try to turn it off.

• HP Photosmart C6280 all-in-One: receives the error message, oxc05d0082, motor pump at a standstill. I have a C6280.

  Screen error bedxc05doo82, engine of the pump at a standstill.  Press the icon (inability to recognize or describe).   How to fix it, or can I still fix this?

  Hello @Munga,

  Welcome to the forums of HP.

  I understand that you have found an error ' 0xc... "on your printer.

  I would like to help.

  Try to go through the following document.

  ' Printers HP - "Problem with print head", "printer failure," 'Ink system failure,' or a ' 0 x ' r a 'C2 '.... "Displays Error Message

  On the off chance that you meant 'choose the motor at a standstill', please see the following document.

  HP all-in-One printers - 'Out of Paper' error and the printer is not get paper

  If you need other assistance please let me know.

• 7310 all-in-One: connecting the HP Solution Center to all-in-One

  When you try to install for my 7310 HP solutions Center which is connected via a wireless network, I don't get this option to connect even though the Help menu shows that this option should be available.  I checked the network and it is there and I can print over the network.  I need to use the other features of the all-in-One, (e.g., Scan) so need the solution Center. Please let me know how to overcome this problem of connection.  Thanx.

  Hi @led7310,

  Thank you for joining the HP Forums!

  I have seen your post on how you try to connect your HP solution for your HP 7310 printer Center. I'm happy to help with this problem!

  Please, try the steps in this guide, printer not found during Network Driver Setup (Windows). If this does not resolve the problem, maybe try scanning without HP software. Scanner without software HP (Windows 7).

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope that this post helps!

• HP envy 23 all-in-one: enter the password administrator or power on password

  I have a HP ENVY 23 all-in-one

  series [personal information deleted]

  When I turn on

  show me on the screen

  "ENTER THE POWER ON PASSWORD"

  CAN YOU GIVE ME THE PASSWORD TO THA

  Page 22:

• HP Deskjet 3052 a e-all-in-one: update the printer software

  I have I already know the answer to this question, but I'll ask anyway.  I have a printer HP Deskjet 3052 J611G e-all-in-one has.  My computer is running Windows 7 Home Premium.   I want to upgrade to Windows 10, but the printer I have is not compatible.  I look for updated software for the printer but can't find anything whatsoever.  Is it possible to upgrade my printer software or am I condemned to buy a new printer?

  Thank you for your time

  Spoiler (Highlight to read)

   

   

  Hello

  Your printer is compatible with Windows 10. the drivers can be downloaded from this link:

  http://support.HP.com/us-en/drivers/selfservice/HP-DeskJet-3050A-e-all-in-one-printer-series---J6/4311836/model/5061072

  Don't forget to click on the button to change, and then select Windows 10 in the selection of the BONE at the top.

  Shlomi

• All-in-one Photosmart C3150: stuck SD card

  I have the above printer.  When you try to load images to Picassa seems to have blocked the SD card too far into the printer.  It didn't load the photos and the SD card will not come out of the printer.  Please tell us how to get at least the card back because I need photos.  Thank you.

  Hey @silverngold92,

  I see you have a SD card stuck in the all-in-one HP Photosmart C3150 printer. To be honest, there is no support measures to help with the removal of this card. I would say that if it is large enough to hold the tongs into the slot, you can power off the printer and use tweezers to guide the card out of the printer. If it doesn't, the only other thing I can think of is to disassemble the printer. Because it is a consumer quality printer, there are no instructions that I can offer to remove the device to access the SD card.

  I would recommend that you give our queue of Technical Support service by phone call. The Technical Support queue can be reached at 1800-474-6836. Normally, when you contact our Technical Support queue, you will be directed to fill out a form to Contact support on the HP website. After that, a phone number and folder number will fill for you. However, due to the age of your printer your product displays as obsolete and not entitled to phone support. Please dial the number manually. When you hear the automated voice and invites you to revisit the site of HP to fill the Contact form, please ignore this. After 5-10 minutes your call will be routed to a technician. Please explain the issue to the technician to see what can be done to address this problem.

  I wish you good luck going forward with this!

• HP ENVY 23-o014 all-in-One: can I update my card on a PC before generation?

  It is a question more than a proplem...

  Last year, I bought my new PC before generation, all-in-one 23-o014 HP ENVY. Now, I want to update my card on the pre-built... I want the best video card and a better CPU (i7) and maybe more RAM.

  Is it possible to do?
  Can I buy parts and if necessary to hire someone to install it.

  Thank you.<>

  Hello

  You should be able to improve the memory and the processor but not the video.  Review the specifications.

• HP 4630 all-in-one: install hp4630... print wireless from iPad... Unable to print from the laptop? All ideas

  Installed new hp4630 printer all in one... can print wireless from my iPad, but I can't print from my laptop?
  Recently upgraded to windows 10. Any ideas? I'm not very computer.

  Hello Tommyboy2,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to print from your computer.

  Have you installed the software/driver for Windows 10?  If this isn't the case, please click on the following link for the e-all-in-one HP Officejet 4630 Printer series full feature software and drivers.

  Please let me know if you see messages or error codes on your computer or printer when you try to print.

  Thanks for your time.

  See you soon,.

• All-in-one for the digitization of jewelry

  Can anyone advice which is a good all-in-one to scan and copy jewelry.  I used L7580-HP officejet pro who gave very good results.  Now since its not available at the HP customer service suggested going for more than 8600.  I was afraid that L7580 uses CCD technology for scanning and 8600 more uses analysis CIS technology.  I do not know the difference in technology but noted that scanners CCD scan better jewelry, please suggest and advice.

  Hi B123,.

  The 8600 Officejet model would be the best choice for your needs.