HP TOUCHSMART 610 1280qd COMPUTER cannot FIND the DISC START? HELP SOMEONE?

Computer was working fine... I stopped him and he wanted to go to the top...  In the past when turning on pc, he would go to the same screen here and there... I turn off and turn it back on and it should start right... At the time where I don't think whatever it is the other number then I pushed the power button the rapids...  GUESS I WAS WRONG...  Help, please...  THANKS RICHARD

Rocker, welcome to the forum.

This error message can mean that the hard drive has failed.  Here is a guide to help you solve the problem.  I hope that you have a backup of your personal data.

Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

Tags: HP Desktops

Similar Questions

  • my computer cannot find the windows Defender application to run

    somehow I erased by mistake the application of windows defender in my cpu, I can't find the wall icon who has used to be as a windows defender application, it shows just a white page instead, I tried to throw but to start it, but without success, I don't know what to do. Help Ive been before by an administrator, I have to follow the instructions, but still can't solve my problem... don't know what to do... help me please

    Hello

    Do these 1:

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search - find top COMMAND - made box an CLICK RIGHT-
    RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at the next startup, then apply OK your way out
    then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    ------------------------------------------------

    Troubleshooting of Windows Defender
    http://support.Microsoft.com/kb/555957

    "%ProgramFiles%\Windows Defender\MsAsCui.exe" is the folder of the default Defender

    Start - type in the search box-> Windows Defender - find top - make a right click on it.
    RUN AS ADMIN

    If no joy using Start - computer or Windows Explorer to access this folder and create a
    Shortcut to put on the desktop and the Start Menu. You can also right click on a shortcut this and
    see if they point to here.

    Goal
    "%ProgramFiles%\Windows Defender\MsAsCui.exe".

    Start in
    "%ProgramFiles%\Windows defender.

    How to enable or disable the Windows Defender
    http://www.Vistax64.com/tutorials/93118-Windows-Defender-off.html

    --------------------------------------
    Maybe something here if necessary:

    What is display / causing the error message? Some anitvirus/security/antispyware products can
    cause this error. On those who use you, including those that your never had even those
    uninstalled (the remnants can cause problems). McAfee is just an example of what many can do.

    Start - type in the search box - Services - find top - Right Click - Run as Admin

    Windows Defender - value STARTED and AUTOMATIC

    or set MANUAL and STOPPED if necessary

    Fix for the problem of 800106ba.
    http://support.Microsoft.com/kb/931849

    McAfee-error report
    http://service.McAfee.com/faqdocument.aspx?ID=TS100610&lang=en_US&prior_tid=2&AnswerID=16777216&Turl==http://KB.McAfee.com/InfoCenter/index?page%3Dcontent%26id%3DTS100610%26actp%3Dsearch

    Check also:

    http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/574fb871-034C-4B42-B800-328af16a9177

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Computer cannot find the printer on the network

    I have a Photosmart D110A and use a router Airport Extreme to print from my PC and iPad.  Until a few days ago, it worked fine but now neither my iPad or PC can find the printer on the network.  When I run the test report of network on the printer, it shows that everything is fine and dandy.  No the guided HP solutions even to get close to solving this riddle... it seems that any questions they discuss involve the printer will not connect to the network.

    OK, so they are both on the network of comments.  Comments network does not allow for communication between devices.

    Open Airport utility, select your airport and click installation manual.  Access to the Internet zone, then DHCP.  What are the two structures IP DHCP for your two airport networks (invited and regular).

    For example, mine is 10.0.1.X for the ordinary and 17.16.42.X for my network of comments.

  • How can I turn the volume on my computer = cannot find the volume indicator

    I lost the sound meter on my Toshiba computer.  I need to increase the volume or check it out because it's quiet.  I used the dial on the front of the computer and is not strong enough yet.  I use to have an indicator in the lower right corner - seems to have disappeared.  Thanks for the help!

    Hedy

    Hello

    ·         Were there recent changes made on the computer before the show?

    I suggest you follow the troubleshooting steps form the article and check if it helps. Also, run the fixit tool and restart the computer and check if it helps.

    System icons do not appear in the notification area in Windows Vista or Windows 7, you must restart the computer

    http://support.Microsoft.com/kb/945011/en-us

  • New computer cannot find the printer driver

    Just got a new computer and now I can't use the printer wireless.  Help

    OK great. First thing, I suggest you do is:

    1. Go to start - Control Panel - programs & features
    2. Scroll through the list and locate any attempt installation of software/driver for your HP Photosmart D110
    3. If the list, uninstall and remove all components of the HP Photosmart D110 (be sure to select this particular device)
    4. Disconnect the USB connection or remove wireless attempt * (if any)
    5. Follow the prompts on the screen, including any necessary reboots
    6. Start the computer and to go to this site for the latest driver for your device-> http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-80511-1&cc=ie&dlc=en&lc=en&os=4062&product=4023246&sw_lang=
    7. Download and install, support to follow all the screen instructions - do NOT connect the USB or try a wireless connection until the installation program invites you to do
    8. Re-attempt to print from your computer once the installation of the driver is verified and complete.

    * just as a side note - a wireless connection from a PC to the HP Photosmart D110 is possible only if there is a present wireless card/adapter in the computer. It is more likely to be present in a laptop or a desktop computer. If this is the case, a USB connection is your only option for a desktop computer.

  • installation a hp deskjet f4480, when I plug in the usb cable, my computer cannot find the printer.

    I have an hp computer, product number NY545AA #ABA, with windows 7, 64-bit and a hp deskjet F4480 printer. During the installation of the printer, I get to the screen that you can plug USB cord say printers and after about 2 minutes. It says no device found. The USB cord is plugged into the printer and the computer, the printer is on. Finally, I have checked, add a device later. I fight the computer and printer together, about 3 years, the printer never worked. I have downloaded new software and the HP driver for my printer, 1 week ago, it did not help.

    Try to use the other USB cable

  • computer cannot find the printer

    My HP Officejet Pro 8630 worked well w / my PC which runs on Windows 7 until last night when he stopped.  I restarted the PC and printer, uninstalled the printer software and reinstalled, disconnected power, changed USB ports etc etc.  Since then uninstall it the printer does not appear in the control panel at all.  The USB is not recognized.  More ' nplay does not!  I suspect an update of Windows or other software may interfere, but don't know how to identify and correct.  Help please!

    Thanks for your reply.  I used HP telephone support; they were unable to correct the problem.  Implemented in a wireless configuration & it enabled printing.  Today replaced the USB cable and am back in business.  Guess the cable died of an unknown cause tho I've never heard of this.

    Thanks again for your response.

  • Desktop computer - cannot find the sticker COST [Product Key]

    Well, the last 2 years ago I remembered my OFFICE was installed from WIndows 7 Professional.

    Check the side of the case (left and right), check also the merits of the case. If all else fails then ask the manufacture of PC support team, they should know the location.

    If you upgraded to Windows 7 from an earlier version, then the sticker is located inside the plastic casing on the back of the Board insert.

    J W Stuart: http://www.pagestart.com

  • Oudu or two days of normal operation, the computer cannot find the printer 6700

    Windows 7, 32 bit.

    Office Jet 6700 normally installs and works normally for a day or two.   Subsequently, the print jobs do not leave (QC) print test Page printed (from properties) say he can't communicate with the printer.    Reinstall the printer is not found.  Entered address IP solves the problem, but after a day or two, the problem repeats.

    Front panel of the printer says always its connected to the network.

    Uninstall everything that brings back me to a normal installation with the problems from a day or two.

    Tried two different routers with the same results.

    The material is up to date.

    Hi Ppapineau,

    When the printer stops printing, instead of uninstalling/reinstalling, I recommend to run printing HP and doctor Scan. It's a quick and easy tool that diagnoses and solves many problems of printing, scanning and connectivity. Click on the link below for more details:

    http://goo.GL/ZV9Ye

  • Cocomputer cannot find the printer and I do not have a disk for it

    Original title: printer SUPPORT

    my computer cannot find the printer and I do not have a disk for it

    Then, download and install the appropriate drivers on the printer manufacturer's support web site.

  • Reinstall Windows 8.1 point C7280 fails cannot find the file

    My computer kept saying that my printer is offline.  Then I uninstalled the driver and now I can not install the driver for my photosmart C7280 all-in-one printer on my computer running Windows 8.1.  I get the error message when installing the computer cannot find the file.   I download the driver several times, removing the previous download. What should I do?

    Hello
    Follow the steps below and check if it solves the problem:

    1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.

    Now, try to reinstall the HP software and check if the installation goes as planned.

    If the problem persists, continue following the steps below:

    2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
    3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
    4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
    5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
    6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
    7. run the installation file and check all difference.

    Kind regards
    Shlomi

  • Cannot find the printer on the wireless network

    My new 6500 a 710n-z printer copier copies very well.  Also, it detects the wireless network and is given an address 169.254.182.35.  I have reset the router several times using the WPS button.  But after I installed the software on my netbook ACER Windows XP, the computer cannot find the printer.  I spent three days trying to get the $% # ^ & * to work.  I see in some documents to get a 169.254. IP address, so I'm probably not connected?  But what to do?

    Well Yes, a 169.254 IP address... is auto-assignée when he can't get one from the router.  The WPS button does not reset the router.

    Do this on the printer: Setup > network > Wireless Setup Wizard. Follow the instructions.

  • Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon, you can collect the text that has been deleted.

    Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.

    Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...

  • After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer

    After Vista update cannot find the external hard drive, AutoPlay does not work, and new unusable disk appears under my computer. Also I can't 'manage' my computer because I do not have "permissions". I tried a fix he 45071 and it did nothing.

    Applications, (Norton and McAfee) (including free evaluation versions are notorious for not not upgrade (or uninstalling) itself.) If NIS has been installed for 3 years, you have NIS update at least once and maybe twice (e.g., NIS 2009 > NIS 2010 > NIS 2011).

    [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) viaControl Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of NIS 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

    8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

    9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run that set it by DEFAULT and modes and AGGRESSIVE. [1]

    10. restart once again & test.

    NB: Installation KB971029 disables AutoRun/autoplay on USB connected but not 'brilliant media' external drives (i.e., CDs & DVDs). See http://blogs.technet.com/b/msrc/archive/2011/02/08/deeper-insight-into-the-security-advisory-967940-update.aspx

    ~~~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or installed updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Imaging a computer error, "the system cannot find the file specified."

    I tried an imaging machine and it fails because "the system cannot find the specified file" I can boot and crossed to the file, the system does not find.  If I remove the file from the location and try to reimage the machine, he succeeded. And I need this file on the machine, why would that be?

    Hello K.C.Clayton,

    Thanks for the return of the response.  Because you're imaging a computer Server 2003, it would be better displayed on the Microsoft TechNet forums.

    Systems Management Server 2003

    http://social.technet.Microsoft.com/forums/en-us/SMS/threads

    Thank you

    James

Maybe you are looking for