HP touchsmart IQ775 Wireless mouse has stopped working.

Wireless mouse has stopped working. I have a HP Touchsmart IQ775 so I can touch the screen to navigate. did a restore of the system in SafeMode this morning and everything works fine now, but of course, it happens again. Last week, the computer did an update to quicktime which disabled, so I had to completely uninstall quicktime and the mouse immediately worked. looked but could not find that whatever this is updated overnight to re - train the problem this morning. However, the system closed and said 'power system failure driver' cannot know how to fix this, all say updated mouse drivers. is associated it with? This not computer savvy, usually google problems on my ipod touch and looking and staring at me but were not able to understand this. Thanks for all the tips

Hello

HP also has their own update so he could be there?

I would stop automatic driver updates, because they are often older certified and MS is far behind.

If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
manually if you wish.

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx
------------------------------------------------------

This, to erase corruption and missing/damaged file system repair or replacement.

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Try to run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-----------------------------------

Also check with HP support and forums.

HP support
http://welcome.HP.com/country/us/en/support.html

Contact HP
http://welcome.HP.com/country/us/en/contact_us.html

HP forums
http://h30434.www3.HP.com/PSG/

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • sMy Microsoft UDB wireless mouse has stopped working. Can it be repaired or is it just did.

    My Microsoft 3000 wireless optical USB mouse has stopped working.  Can it be repaired or is it just did.

    Hello

    -Don't you make changes to your computer because of which the question began?

    I would recommend that you follow the steps in this article and see if they help.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

  • my wireless mouse has stopped working

    I have two mouse Microsoft Wireless in the 3500 Series and 4000 series, I had the 4000 first order works now my 3500 has stopped working can help a whole?

    Hi Richard,

    Here are a few troubleshooting steps that you can try to solve this problem.


    Method 1: Run the Microsoft fixit tool and check.

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems

    If the method above does not work, proceed to the next method.

    Method 2: Refer to the suggestions for the following links.
    Troubleshoot a wireless mouse that does not correctly

    http://support.Microsoft.com/kb/321122

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    If you have additional questions, or if this problem persists, come in and we will be happy to help you.

  • All of a sudden my wireless mouse has stopped working. The mouse is on and relatively new.

    Tonight my mouse (Logitech) wireless has stop working.  This happened once, and one of my friends told me to remove the receiver, shut my computer down and put the mouse back in.  However, I don't remember the exact steps he gave me.   I tried several different things, but none seems not to work.

    Hello

    What is the model number of the mouse?

    Method 1:

    I suggest you run the Microsoft fixit tool and check.

    Hardware devices do not work or are not detected in Windows:

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2:

    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more

    http://support.Microsoft.com/ph/7746

    Method 3:

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows?T1=Tab03

    I would suggest you also contact the Logitech support forum and check.

    http://www.Logitech.com/en-us/support

  • My Apple wireless mouse has stopped working.

    Initially, software system warned me that the batteries are low.  Then it stopped working completely.  I replaced with new(tested good) AA batteries and the mouse still does not connect to my iMac. 10.11.3 is updated software.  My trackpad works ok so the BT Service is always good. I even tried an another Apple wireless mouse and it doesn't connect either.  Can an optical mouse as this just failure?

    A mouse can not just, indeed at the end of his life he cannot do anything else.   I think that your first test is to hold the mouse upside down and check if you have a green light display.    If so, the batteries are probably ok.   If the light flashes, it is most likely, connections are at fault.   Clean the inside of the battery carefully in case there is any residue of previous batteries.   Clean your battery connections and try again.   You could also try your mouse (indeed, two of them) with another computer, maybe a friend.   It doesn't matter if it's a pc.   That will confirm the effectiveness of the mouse.

    Magic Mouse 2 has been designed and developed for El Capitan (10.11.3)... so old mice may not work as well, but I have yet to hear any complaints.

  • my microsoft wireless mouse has stopped working, I replaced battery

    my wireless mouse was fine and then stopped working. I changed the batteries and it seemed to work and then arrested again.

    Hello

    I suggest you to follow the steps in this link and check if it helps:

    http://support.Microsoft.com/kb/838398

  • V470 blue tooth wireless mouse has stopped working

    My Logitech v470 blue tooth mouse worked but stopped.  I went online and downloaded the latest version of the software.  The machine started to work.  I used for1.5 days and on the second day, all of a sudden, it stopped working.  All diagnoses that I know say it works.  The blue light comes on when I press the search button but never connects.  The computer says, the device works, but it does not.  Please help since the pad on my laptop is more sensitive (opens instead of allowing me to do some drag on the desktop) and I need the mouse to work around the touchpad.

    Hello

    read these tutorials on how to set up bluetooth

    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    Here are solutions to some common problems with Bluetooth devices.

    You can also try a convenience store for diagnose and fix common problems with equipment and devices running.

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    If the above does not correct this contact Logitech

  • 2.4 GHz HP wireless optical mouse has stopped working

    My wireless mouse has stopped working. I use it on a laptop Windows 8. I used this mouse wireless with this computer for almost a year. All of a sudden it just stopped working. I changed the batteries, so it wasn't the problem. I have uninstalled and reinstalled software and that did not work. Is there anything else I can try before I buy a new mouse? Product # is WT564A.  The model # is FHA-3510. The S/N IS CN1 [personal information]. Product #, model # and s/n is not the computer mouse. Any help would be greatly appreciated.

    Hey there eunash,

    I found three links that could help you, please take a look and try some of the steps:

    Keyboard and wireless mouse troubleshooting

    Mouse, touchpad and keyboard with Windows problems

    .. .and finally, check out the Merita post on this thread, they had some good ideas while explaining what might be going on: http://h30434.www3.hp.com/t5/Other-HP-Consumer-Products-and-Technologies/HP-FHA-3510-mouse-trouble/m-p/2666383/highlight/true#M10473

  • Your wireless card has stopped working properly.

    Often, I receive this message "problem reports and solution:
    A problem with your wireless network card

    Your wireless card has stopped working properly.
    There is a network adapter that allows your computer to connect to a wireless network.
    To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer.

    Even if I get this message that I am able to connect to wireless internet. I checked on the DELL website, and according to them, I have the driver for my Inspiron 1520 then I would like to know how I can stop this annoying message that appear all the time? Is there an updated driver that I don't know?
    The problem refers to my Dell Wireless 1390 WLAN Mini-Card (Driver version 4.170.25.17)

    I would be grateful for any advice.
    Thanks in advance.

    Hi dtw1970,

    While I was researching online error message met that it is a known issue on dell computers and there are a few steps available in the dell Web site.

    Check the link and try the steps mentioned below.
    http://en.community.Dell.com/forums/p/19094058/19217044.aspx#19217044

    You can also try posting your query in the Dell Community, see the link below.
    http://en.community.Dell.com/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My wireless mouse just stopped working. I can still use the mousepad however. I changed the batteries does not. Then I tried another mouse wireless, and it didn't work either.

    My wireless mouse just stopped working.  I can still use the mousepad however.  I changed the batteries does not.  Then I tried another mouse wireless, and it didn't work either.  What can I do next?

    Buy an inexpensive wired USB mouse for less than $5 and see if it works.  As far as I'm concerned wireless mice are more trouble than they are worth.  YMMV :-)

    Good luck.

  • Your wireless card has stopped working properly, because a compatible driver is not available for this version of Windows.

    I'm not very tech-savvy... like everything. So I have no idea what to do on this subject, but the problem is very irritating because my wireless just randomly stops working for a short period of time, and it happens quite often. Does anyone have any suggestions?

    My computer told me to go to the website of Buffalo, but I had no idea what to do from there.

    Hi Chadbassett,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description provided, I understand that you are facing a problem connecting to the wireless network.

    He would be grateful if you can answer this question in order to help you further.

    1. have you made changes on the computer before this problem?

    2. What is the brand and model of your computer?

    I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the windows network troubleshooter, and check if it helps.

    Using the troubleshooter from network in Windows 7: http://windows.microsoft.com/en-US/windows7/Using-the-Network-troubleshooter-in-Windows-7

    Method 2:

    I suggest you to download and install the latest drivers wireless in the factory.

    Note: If the drive is not compatible with windows 7, I recommend you to install the driver software in compatibility mode and check if that helps.

    Windows 7 Compatibility Center: http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

    Make older programs in this version of Windows: http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Windows

    Reference:

    Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

    We would be more than happy to help you if the steps above did not solve the problem.

  • IQ524 wireless keyboard/mouse has stopped working

    All of a sudden the keyboard and mouse do not work. Batteries are full. Device driver seems to work. I don't remember add a device. I removed a printer attached to my laptop.

    Well, I fixed it myself. I open the PROGRAMS and FEATURES [win 7] and uninstalled iCloud I have seen that I installed yesterday and VIOLA! The keyboard and mouse are back!   Hope this helps other people who may have a similar problem.

  • Microsoft Explorer Mini track blue Mouse has stopped working

    The mini track blue mouse worked fine and then just stopped working.  I tried to turn on/off the mouse and restart the computer.  I am running Vista.  Any ideas?

    Hello
     
    Do you remember any change to your computer?
     
    I suggest that you follow the steps below and check if that helps.
     
    Step 1:
     
    Follow the steps mentioned in the article below and check if any method to solve your problem.
     
    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122
     
    Step 2:
     
    If the methods in the article made little assistance, I would have you perform the System Restore point that your mouse works fine.

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • My magic mouse has stopped working.   Is there a battery that I need to replace?

    My magic mouse stop working.   Do I have to replace a battery?  If so, how?

    If it's a Magic Mouse 2 then you reload by using a standard USB cable Flash. The port is at the bottom of the mouse. If it's a Magic Mouse, then you must replace the batteries. Coverage is at the bottom of the mouse.

  • Qosmio PX30T - Bluetooth mouse has stopped working

    I was able to reactivate Bluetooth on my PX30T after having changed the batteries in my Bluetooth mouse. (Sorry Toshiba, your standard mouse is uncomfortable!). Not sure if the circumstances leading to it as my son noticed the battery do not and then changed the batteries.

    I have gone into arrangements and have looked everywhere and not see compatible Bluetooth (or even a switch to do). I have no more Bluetooth icon in my taskbar. The only clue that there is in the mouse settings, but it won't let me uninstall it either.

    Other than a reset full... any ideas?

    Are you sure that it is a BT mouse?
    The manual indicates that the keyboard and wireless mouse are connected to the all-in-one computer! I recommend the user manual.

    Usually the keyboard and wireless mouse may be detected by computer automatically.
    But in case that does not work, you may need to match the WLan keyboard and mouse.

    (1) turn on the computer
    (2) press and hold the middle mouse button
    (3) slice the power that, in the back of the mouse on the market
    (4) the battery indicator starts flashing to indicate that the mouse is ready to be paired
    (5) keep the mouse near the bottom right of the computer within 10 cm place the WLan receiver
    (6) the battery indicator lights up for about 5 seconds if the pairing is successful

    the connection will be established then

Maybe you are looking for