HP TouchSmart PC ENVY 15-j040us laptop

Eager to install SSD in my laptop. Not finding much info on sata ii or sata iii. Need this before I buy, I geuss I do anyway. You will enjoy all the necessary info to buy and install. Thank you

Hello

Your manual: http://h10032.www1.hp.com/ctg/Manual/c03733656.pdf

Data sheet: http://support.hp.com/us-en/document/c03820144

SSD white paper available for your model:
http://support.HP.com/us-en/document/c02435719

If HP has not tested 2.5-inch SATA SSD when your model has been released, which is not at all a cause for concern in the upgrade of the current HARD drive to SSD. For can go through the white paper of the SSD.

Latest brand 2.5 inch SATA SSD will be fine. There is no restriction of SATA II or III. Now, most of the SSD of SATA-III and is backward compatible II or even I.
Your laptop came with 2.5 inch SATA 750 GB HDD (SATA II).

You can easily clone/migrate HARD integer to the SSD drive using SATA USB adapter (please go through the sticky thread by Erico Expert HP in one of the sections here in this forum)
Note: The total used capacity of the HARD disk must be less than the total capacity of the SSD to work

Then, simply replace its primary Bay (boot drive) HARD drive with your new SSD.

Moreover,.
You can also use the discs of recovery/USB you have created some out-of-box after you have configured your computer laptop first time, to restore the factory settings in the SSD
Note: The total capacity of the SSD should be at least the same as you total capacity of the HARD disc that came with your laptop (750 GB) for recovery media to work

Go through the manual (Page 47-49) HARD drive replacement procedure - it's simple to do.

Concerning

Visruth

Tags: Notebooks

Similar Questions

  • TouchSmart HP ENVY 15-j040us Notebook PC-problem with internet gambling after upgrade to 8.1 windows

    I have a HP Envy 15-j040us Notebook PC Touchsmart is currently using 8.1 64-bit windows.  I play 2 Farmville on Facebook.  I started having problems after installing Windows 8.1.  My mouse hesitates and reluctant game and I can barely move on the screen.  I am not real computer savy but can follow directions if you can just tell me what I need to do to correct this.  Everything on the screen is just very slow and the mouse does not seem to want to go where I'm pointing to it.

    Hello @aodom ,

    Welcome to the HP Forums!

    I see that you have any questions, play Farmville 2 since the update to Windows 8.1.

    First, update the drivers for your graphics (GPU) with the following download: driver Intel graphics high definition (HD).

    Once you have done this, update Adobe Flash player plugin with the following download: Adobe - Flash Player

    Once you have updated the GPU and the Flash Player, disable hardware acceleration for Flash on your laptop:

    1. Right click any where on the Farmville game once it has loaded.
    2. Select settings.
    3. Make sure that you are on the tab display/graph (see image below).
    4. Clear the check box to enable hardware acceleration if it is available. If you are prompted to activate the control of your webcam or microphone that these steps do not apply because the game is not trying to use the acceleration.

    Let me know if it helps.

  • HP Touchsmart PC Envy 15-j178ca laptop

    I want to run Train Simulator on the computer from 8.1 to win, but it will not install (old program). I have partitioned the hard drive and now want to install Windows 7 Professional on it from a 128 GB flash drive. I copied the cd in the drive, but it will not install. How do I install it without having to buy an external dvd optical drive.  Thank you!

    Slinker wrote:

    I want to run Train Simulator on the computer from 8.1 to win, but it will not install (old program). I have partitioned the hard drive and now want to install Windows 7 Professional on it from a 128 GB flash drive. I copied the cd in the drive, but it will not install. How do I install it without having to buy an external dvd optical drive.  Thank you!

    Hello

    You can use Hyper-V to do this:

    http://superuser.com/questions/472499/how-do-i-install-and-use-Windows-Virtual-PC-in-Windows-8

    http://www.PCWorld.com/article/248995/how-to-install-Windows-7-without-the-disc.html

    http://arstechnica.com/business/2009/12/the-USB-flash-drive/

  • TouchSmart HP Envy 14 - laptop occasionally starts with black screen

    Hello and thank you for taking the time to look at my problem. My laptop is a HP Envy Touchsmart 14 8.1 Windows running. The product name is HP ENVY 14 Sleekbook TS and the number is E0M45UA # ABL

    My problem is that my computer occasionally starts with a blackscreen with my mouse in the Center. I can move the mouse but it will return to the Center after a few seconds. I can't seem to do anything but hold the power button and shut down my computer. After that I open it again, can I use my normal computer. I recently did an update of the BIOS of my computer and I don't know if that is causing the problem. How can I solve this problem?

    Hi Shibein:

    Thank you for your inquiry.  You can run the HP Support Assistant click here to help solve the problems and search for updates.  You can also run the ' HP PC Hardware Diagnostics UEFI" click here." "I am also sending documentation on " Touchpad, keyboard, or a mouse ",click here, and ' computer will start (Windows 8)"click here. If none of this has solved the problem, you can try to restore the bios updated"Bios restore" TouchSmart HP ENVY 14-k110nr Ultrabook support" click here, or restore your computer to a date when it was working fine. '" Here is a link to 'use the Recovery Manager to restore the software and drivers (Windows 8)'click here. If you need help can you give us the exact model on HP Envy Touchsmart 14 you have.   "How can I find my model number or product number?" click here.

  • TouchSmart HP Envy 15-J104sa memory card reader does not

    I took delivery of a HP Touchsmart from Envy 15 - J104sa, running Windows 8.1 this week and the internal memory card reader does not work. It does not recognize SD cards (I tried more than one) and continues as if nothing has been inserted; Don't display an error message. The cards work on my previous HP laptop. The only way to get the laptop to show an inserted SD card is to run the driver software update (http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63415.exe) whenever an SD card is inserted; This must be done with the card in the reader. If the software is running and then the card nothing happens. If the card is ejected and then re-inserted (or a new card inserted) it is not recognized and the process must be restarted and the driver reinstalled even though nothing has changed.

    Can someone please help me with this question or I'll have to go back to the HP laptop. I do a lot of photography so being able to read fast and reliable SD card is extremely important for me; It is not a problem, I was expecting a new laptop all right out of the box.

    Thanks to you all.

    Unfortunately not, updates of driver solves the problem, but an update of the BIOS through the HP helper application seems to have resolved the issue. While I appreciate there were not specific drivers available in my opinion, it is difficult to accept that HP should be able to release a model where they know the equipment are not fully supported by the operating system and in this case does not work.

  • WANT x 360 laptop: how to disable TouchPad on ENVY x 360 laptop?

    1. I have no key.

    2. I have attached a mouse but the TouchPad is always enabled.

    3. I have 2 options, but all of them are frozen:

    Control Panel\Hardware and Sound\Tapping\TouchPad Settings\Double to disable Zone press to activate or disable the TouchPad

    Control Panel\Hardware and Sound\Tapping\Top Action\Switch wide TouchPad left

    So, what can I do to disable the TouchPad on ENVY x 360 laptop?

    Solved.

    Solution:

    Start /.

    Research /.

    Personalize your computer.

    Change mouse pointers.

    HP control area settings.

    Disable HP control of area

    Source:

    http://h30434.www3.HP.com/T5/TouchSmart-PC/how-to-disable-touchpad-on-HP-envy-TouchSmart-M7-notebook-PC/TD-p/3180731

  • HP ENVY 17-j185nr TouchSmart: HP ENVY 17 TouchSmart-j185nr - Replicator of Port

    You are looking for an official HP port replicator, designed for the TouchSmart from HP ENVY 17 - j185nr laptop.  Can anyone provide a valid reference number to order?  Thank you very much.

    LandonM wrote:

    ... designed for the TouchSmart from HP ENVY 17-j185nr laptop. ....

    Hello

    No, you won't find ever designed for your machine. Your machine does not docking port so you can use any USB port replicator. HP has products, the following is very popular

    http://WWW8.HP.com/us/en/products/OAS/product-detail.html?OID=5278439

    Kind regards.

  • Archive of TouchSmart HP ENVY 15-j051ea Notebook BIOS F.24

    Hello

    Is there anyway to get the previous version on the laptop bios?

    I've updated to the latest version F.43 for my TouchSmart from HP ENVY 15 - j051ea laptop and now refuses to boot from the HARD drive. Saying: there is no operating system.

    Is there a section archive somewhere that I can download the bios F.24?

    If there is can I just run the setup f.24 and crush f.43 with it?

    Thank you

    Thanks for the reply.

    It turns out that the legacy support has been disabled in the BIOS so I had to solve it it.

    Now works.

    Thank you

  • HP ENVY 17-N078CA laptop: seeking the machine with windows 8.1 - and the upgrade to 10.

    Hi all

    I am looking at buying a machine to re-furb.

    HP ENVY 17-N078CA laptop

    The machine has windows 8.1 and I wanted to know if there was problems with upgrade to windows 10.

    edillard

    Hello;

    Let me welcome you on the HP forums!

    I read your post about upgrading your PC to Win10 and wanted to help.

    While HP has not tested your PC with Win10 and has not certified it will work, the good news is that HP does not provide drivers for your PC Win10: http://support.hp.com/us-en/drivers/selfservice/hp-envy-17-n000-notebook-pc-touch/7777355/model/8429748#Z7_3054ICK0K8UDA0AQC11TA930O2

    If this page does not display the windows 10 when you open it, then click Edit and select Windows 10 in the menu drop-down.

    Unfortunately, the Win10 GoBack function is NOT reliable, and that can leave you with a corrupt machine that will require the factory reset and lose all that on it, to get it working again.

    You can avoid this by making an image backup to an external hard drive or a USB drive using Macrium reflect (MR), which provides a FREE version that can be used to image and restore partitions or drives together.

    What I recommend is the following:
    (1) download and install Macrium reflect (MR)
    (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
    (3) use the option to create a CD or a USB startup key

    NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.

    Good luck

    I'm a volunteer and I do not work for, or represent, HP.
    ========================================================================
    If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!

    If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

  • HP ENVY 15-ae178TX laptop: when this laptop from HP ENVY 15-ae178TX computer laptop arrives in Singapore for sale?

    When this laptop from HP ENVY 15 - ae178TX laptop computer comes to Singapore for sale?

    Hello

    Good question. It doesn't happen at all, but you should be able to find a plug similar to Singapore. Normally the HP doesn't sell product even in all countries.

    Kind regards.

  • HP ENVY 17-1020el laptop: PCI SImple communications controller driver

    I formatted Notebook Envy,

    Model: HP ENVY 17-1020el laptop

    Product: WP007EA #ABZ

    So: Windows 7 (64)

    I need driver for the controller PCI of Communication SImple

    Hardware ID

    • PCI\VEN_8086 & DEV_3B64 & SUBSYS_144D103C & REV_06
      PCI\VEN_8086 & DEV_3B64 & SUBSYS_144D103C
      PCI\VEN_8086 & DEV_3B64 & CC_078000
      PCI\VEN_8086 & DEV_3B64 & CC_0780

    Thanks for the attention.

    Hello

    Should be the engine of imei on the following link.

    http://ftp.HP.com/pub/SoftPaq/sp47001-47500/sp47395.exe

    Kind regards

    DP - K

  • HP ENVY 15-j140na laptop: HP ENVY 15-j140na laptop computer have mSata socket?

    Hello!

    I just bought a HP ENVY 15-j140na laptop. There mSata socket? Because later I would add an SSD if possible?

    The laptop: http://store.hp.com/UKStore/Merch/Product.aspx?id=J0B97EA&opt=ABU&sel=PCNB

    Thank you very much for your help!

    Hello

    Please consult the following list:

    http://www.mydigitaldiscount.com/mSATA-SSD-Compatability-list.html

    Kind regards.

  • HP ENVY 15-ae103no laptop: want damaged display, yellowish stains

    Hello

    I recently bought my computer, I noticed a spot yellowish on the screen when something dark is displayed. Now, he has started to grow.

    I look like this http://imgur.com/UCCiKPs

    I think it's something that puts pressure on the screen or something. Probably something behind the screen. The tasks also change in size and intensity when I move the screen from different positions.

    I have reproduced my TV screen and the second monitor, and the tasks does not show on them.

    I think it's something that should under warranty? Or maybe it's something that can be fixed in a local shop?

    Sorry for my bad English

    Hi @CasperKarlsson,

    Thank you for visiting the Forums HP's Support and welcome.

    I looked in your question on your HP ENVY 15-j171nr laptop computer and a yellow spot. Thank you for detailed information about what you have discovered. Please call us http://ow.ly/Xa6p5 they will be happy to help you immediately.

    If you need more assistance let me know and I will gladly do whatever I can to help.

    Please let me know if this information helps you solve the problem by marking this post as accept as Solution, this will help others easily find the information they seek.

    Thank you.

  • How can I disable the fingerprint reader? I use an HP Envy 15-k064nd laptop.

    Nice day

    I just bought and Im the proud owner of a HP Envy 15-k064nd laptop.

    I would like to disable the fingerprint reader, because he keeps asking codes while I type on the keyboard. Could you please help me telling me how I can disable the fingerprint reader please?

    Thank you

    Anne-Els

    Please follow the steps as indicated below to solve the problem

    Disable the biometric identifiers:

    Delete the biometric login option:

    Control Panel > biometric devices > change biometric parameters

    Uncheck the BOX "Allow users to log on to Windows using their fingerprints"

    Save the changes.

    To remove the biometrics data for all users, click the option button (round) "off biometrics.

    Clear validity sensor driver:

    Validity sensor driver controls the fingerprinter material.

    SimplePass software manages the password database.

    You can disable the device.  The fingerprinter work not long until the device remains disabled.

    Control Panel > Device Manager > biometric devices > right-click on Validity Sensor > disable

    Hope this helps, for other queries in response to the post and feel free to join us again

    * Click on the star of CONGRATULATIONS on the left to say thank you *.

    Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

    Thank you

    K N R K

    I work on behalf of HP

  • ENVY of HP dv6-7307tx: replacement of the HP ENVY dv6-7307tx laptop computer screen.

    My HP ENVY dv6-7307tx laptop screen must be replaced because it has 3 vertical lines on the left side of the screen.

    I need to know, what I'll be able to fix a screen full hd 1080 p instead of 720 p hd screen. I think its possible because both screens the 40pin connector.

    I found a screen full hd with a connector 40pin here is the link (http://www.laptopscreen.com/English/model/HP-Compaq/ENVY~DV6-7202EG/)

    And here's the 720 p screen which entered the laptop (http://www.laptopscreen.com/English/model/HP-Compaq/ENVY~DV6-7307TX/)

    Please let know me if what im trying to do is possible or not.

    Hello @Kandekumbura,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you are looking to replace your screen and tried to help you!

    Please see the following guide to find all the compatible screens for your device:

    HP ENVY dv6 Notebook PC Maintenance and Service of Guide (Chapter 4, Page 95).

    Please let me know if this information has been helpful by clicking the thumbs up below.

    Have a great day!

Maybe you are looking for

  • store crashes itunes 12.5.1.21

    Since the new iTunes update, whenever I click on the store it causes iTunes to stop working, and then close.  I uninstalled and reinstalled following the indications of Support from Apple and the same problem persists.  Any help would be welcome.

  • Screen cracked on Satellite A200-1Z3

    Hello..I live in amman-Jordan, I bought a laptop Satellite A200-1Z3, and the third day I found the cracked screen, I went to the store of toshiba in amman and asked me for a new, but have said it will follow the coast me $ 563,3 so I went home and se

  • Is there anywhere to find the Camileo P10 disc?

    I just bought this camcorder and it is not the disk with it... and I can't watch or edit my hd videos... Which is really annoying: /... Is there anywhere to find the disc or download the drivers?

  • Satellite - cannot connect to the Internet

    I just bought a new 750 Satalite, it was working fine, then yesterday the internet wireless connection abandoned and now used to connect again. I have other laptops and they are connected to wifi. Someone at - it ideas?

  • Error code 0 registry.

    Hello We tried to install new software on our Windows 2008 R2 server. Installation package is normal MSI file. Installation always breaks the code erroor 'register error Code 0. What could be the reason? Best regards Hannu Peltola Apex Communications