HP Touchsmart TX2 (ea 1340) - is there a TPM chip?

Similar Questions

• Q-116 flag 23: 23 Pavilion Q 116 there a TPM chip?

  The Pavilion Q 23, 116 has a TPM chip?

  Hello:

  If so, there will be a category of security devices in Device Manager.

  Click to expand this category, and there should be a chip v 2.0 of TPM.

  If there is no safety devices category in Device Manager, then your PC does not have a TPM chip.

• TouchSmart tx2-1370us Recovery Disc Set failure

  I am writing on behalf of my sister.  Here is his story:

  Screen of her laptop TouchSmart tx2-1370us broke earlier.  It's under warranty where she bought in so he was expelled to be repaired.  When he returned, the screen has been set, but there was a note indicating that they had lost its Windows 7.  The computer loaded and executed perfectly, but it was the pop-up "is not a genuine copy of windows.  She claims that she was unable to read the sticker product key the computer good enough to get it to accept anything, she entered.  When she called the store, they said that HP would be able to help get it back.  HP sold its recovery disks which were to restore the computer.  It is a 3 disc set, marked 2 System Recovery DVD Windows 7 Home Premium and 1 additional CD labeled Application & Driver recovery CD.  CDs ran several times still to come as fruitless after the first 2 CDs.  I won't get in his experience of the customer support, but she claims that she spoke on the phone with HP 6 times in the course of a week and nothing they had to say or to offer.  Always unsuccessful recovery message.  She abandoned, almost crying at this time, and I said I'll try.

  After a bit of searching I found a patch on the HP website that would supposedly solve the problem of recovery disks.  The patch was properly installed, green checkmark and all, and all 3 CDs was successfully.  The computer restarts, the screen of the Installation of the HP software ran for a while before another restart then the usual recovery failure message.  I tried many times with the same result every time.  I saved the newspaper from the last go to it and post it below.  It seems the States BIOS Vista as OS, but she bought the computer pre-loaded with Windows 7.  Could there be something in that fact cause a problem?

  Someone suggested to reset the BIOS to factory default, but that didn't work either.

  When you save the log to USB, I could see all of the files, there are 3 readers listed SDV (C Local disk (D & BOOT (X))

  For any help or suggestion would be appreciated.

  Here is the log:

  --------------------------------------------------
  [2:30:01.41] enter audit OS Edition...
  ----------------------------------------
  [2:30:01.41] check RStone.ini file to determine the required edition.
  [2:30:01.44] out of checking OS Edition...
  --------------------------------------------------

  --------------------------------------------------
  [2:30:01.46] controls if the upgrade to Windows 7 is required.
  ----------------------------------------
  [2:30:01.47] current edition is [HomeBasic]...
  [2:30:01.47] [start] necessary. Don't need to upgrade...
  [2:30:01.47] [Starter] needed...
  [2:30:05.17] necessary [Starter] edition. But is not the case of the [Starter] OS...
  [2:30:05.17] OS edition upgrade might have a problem...

  Management and maintenance of deployment images tool
  Version: 6.1.7600.16385

  Image Version: 6.1.7600.16385

  The current edition is:

  Current edition: HomeBasic
  The operation completed successfully.

  Component: TDC Preinstall diagnosis Tools for Windows 7 - TDC
  Error found: you have set the flag of Vista on an image of Win 7, please use EEPROM to set ~ OS SKU ~ value = 2
  ---------------------------------------------------------------------------------

  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  ...
  Failed to update factory! ***
  [2:38:37.07] Suggest create PIN-journal and send to TWN PDC NB-PreinPM for further analysis...
  ...
  [ 2:38:37.07] ------------------------------------------------------------------------------------------
  [2:29:20.80] Start BBOffline.cmd...
  UPDrv = [C:]
  [2:29:21.35] value UIA 951 error Code
  [2:29:21.68] start [corrections].
  [ 2:29:21.68] ---------------------------------------------------------------------
  [2:29:21.68] FixUps.cmd...
  [2:29:21.68] create overall progress information...
  [2:29:21.72] complete FixUps.cmd...
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] start [Tweaks for SDRD].
  [ 2:29:21.72] ---------------------------------------------------------------------
  [2:29:21.72] SDRD Tweaks to change the regional settings default user...
  [2:29:21.72] copy C:\System.sav\Util\TDC\MCPP\FBIRES\FBIUSRES. DLL.
  [2:29:21.76] Run "IntlCfg.exe - skudefaults: US-image: C:
  [ 2:29:27.64] ---------------------------------------------------------------------
  Housing starts [2:29:27.64] [Sleep 10 sec].
  Starting price [2:29:37.68] [creation RStoneFUpdate.INI].
  [2:29:47.78] start [create 1 GB Pagefile for offline].
  Volume in drive C has no label.
  Volume serial number is 60E6-4F60

  Directory of C:\system.sav\bbv

  01/01/2001 02:29 1 073 741 824 pagefile.sys
  1 file (s) 1 073 741 824 bytes
  0 26,019,311,616 dir bytes free
  [2:29:47.85] start PININST.exe for offline...
  [2:30:13.27] Start SysID Check...
  [2:30:16.34] Start Option control code...
  [2:30:18.37] Start PIN Tweaks...
  [ 2:30:19.44] ---------------------------------------------------------------------
  [2:30:19.44] PIN Tweaks to hide all for BurnBoot PBO and BBV2 on restored image...
  [2:30:19.44] update PININST_BBV.ini...
  [2:30:19.46] update PININST_BBV2.ini...
  [2:30:19.48] update PININST_BBV2POST. INI...
  [2:30:19.49] update PININST_BBVClean.INI...
  [ 2:30:19.52] ---------------------------------------------------------------------
  [2:30:20.40] starting factory updates...
  [2:30:27.43] installation start QFE offline...
  [2:38:36.81] PININST_OFF: PAST...

  [2:38:36.91] Type C:\System.sav\Logs\BBFindEr.log...

  [2:38:36.93] Type C:\System.sav\Logs\BBFindE0.log...

  -C:\SYSTEM. SAV\LOGS\BBFIND4QFE. JOURNAL
  [2:38:36.93] FUList.log to check if there are double Desc...
  No duplication.
  [2:38:37.05] duplicated No. Desc is located... PAST.
  [2:38:37.05] there was no update from the factory...

  Lets take a chance it's for W7

  Go here and download the correct version of W7 (home or pro, they have not a starter edition), version 32 or 64 bit and the language, it's going to be a file iso very large, once downloaded, burn it to a blank disc DVD + R as an Image, this can be done on a Windows 7 PC, right-click on the iso file and select 'Open with' > 'windows disc image burner.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  This will make a regular windows 7 installation disc allows you to get Windows installed, use the key to see if it will be ignited.

  Then, you will need to download the drivers for your specific model on the HP site and install it.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4041813&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

• TouchSmart tx2 digitizer pen acts as if it was more 'ink '.

  Hello

  I have a TouchSmart tx2 1370us possessing a pen from the digitizer.  I don't know if the pen or display for the pen hardware goes wrong.  The best way to describe what I see is when a real pencil is about to run out of ink. When you write, you get a little ink, then nothing and then ink again.

  I would like to be able to determine if it's the pen or display hardware which is a failure.

  I tried the following.

  Installed Windows 7: the same results

  Install windows 8: same result

  Note: each installation of Windows was a new installation again.  No upgrades or 'repair' installation.

  I'm pretty confident that it is not a driver issue because the result was the same.  I tried with the pilots and pilots of the digitizer.  Windows supports the pen without the drivers of manufacturing.  honestly, I have the best results in time of response without drivers leaving the default windows drivers to support the pen.

  I know that the display was not all tasks 'dead' because the pen is able to operate in all areas of the screen, but eventually it will stop writing on the screen a bit and stutter a bit and then resume writing.  The cursor will disappear at the same time.  During the failure of pen touch and mouse will continue to function.

  The fault returned the pen usless right now and I would like help to determine if the pen is defective and, possibly, a new pen.  I think that HP would be a good source to know that there could be a solution or a previous case in the CV database. I was not able to find a solution from the side of consumers.

  -Thank you

  I bought a replacement ballpoint pen, and so far things are working properly.  So far, the issue seems to have been the pen.

• HP Touchsmart tx2-1275dx

  I have a HP Touchsmart tx2-1275dx that I bought at Best Buy and there is no technical support on the site of HP information.   Is there an equivalent model whose support is?  I need to know the configuration of the product and especially map mother, keyboard, monitor, and memory specifications.

  Hi sazn,.

  Here is the support page for this product:

  http://h10025.www1.HP.com/ewfrf/wc/product?product=3979556&LC=en&DLC=en&cc=us&tool=&query=TX2-1275dx

  Product specifications can be found here:

  http://support.HP.com/us-en/document/c01761014

  Is there something in particular you are looking for?

• HP touchsmart tx2-1025dx pc

  Hi I have a Hp Touchsmart tx2-1025dx pc and he go and turn on the locking caps keeps blinking and the computer doesn't show anything on the screen, but all the lights are on and I hear the fan sometimes it works sometimes is not anyone can help with this

  Hi Hernandezerick2 and welcome to the Forums of HP!

  I understand that you have a problem getting your HP TouchSmart tx2-1025dx Notebook PC to turn on. I'll try my best to help you solve this problem.

  Here is a document for computer does not start and the lights blink or the computer will beep with information about what mean lights and beeps and how to fix it.

  I hope that this information help, please let me know how it goes.

  Thank you and have a great day!

• HP Touchsmart Tx2 1024ca.

  So a few months I posted because that randomly my serial number and the name of the product from my Touchsmart Tx2 laptop disappeared to be replaced by 1234567890 and Soyuz 3.0.  I was correct, without being able to find a solution because the computer itself still worked.

  When I turn on my laptop (running windows 7 Home premium) I can single connection before she pronounces it now wants to restart without letting me see the blue screen that says. Or he hangs up and freezes and I have to reboot myself.

  The same thing happens in Mode safe, apparently by chance I can connect at times.

  Tried to get this back to an earlier point, problems persist.
  CD/DVD drive is recognized by the computer / device but Manager does more or the other.

  Currently, I have no money to replace my laptop, so this isn't an option, but if anyone has any ideas / tips, they would be greatly appreciated. Because now I'll see if I can fix the restarting so I can see what the beautiful blue screen has to tell me. Will update this if I can get more information.

  Edit:

  Noticed before computer shutdown errors do not have to be turned on;

  0x0000000A & 0x0000003D.

  Transferred and took my computer to my girl in town IT probably will never know exactly what is happening, but it is back in working order.

• TouchSmart TX2 1340ea card mother 504466-001

  Does anyone have a diagram for the Touchsmart TX2 504466-001 motherboard?

  Found that it chaps! The Council is actually a Quanta TT3 Soyuz 3.0 and here is the link...

  http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&sqi=2&ved=0CDYQFjAB&url=http%3A%2F%2Fkythuatphancung.com%2Fdownload%2Fhp-touchsmart-tx2-schematic-quanta-tt3-soyuz-30-schematic-31tt3mb0020-da0tt3mb8d0.html%3Fdl&ei=kkdkUY-sIOqw0AW4vYGoCw&usg=AFQjCNGQwKmyT6X2YYUh9nbJYV7iy4_j3g&sig2=2GiMFlqxp6NEwbiVya37cQ&bvm=bv.44990110,d.d2k

  Enjoy!

  BTW I have no idea why he says: I am a student, I am an electrical engineer!

• HP Touchsmart TX2-1375dx

  Hello.

  Just got a HP Touchsmart TX2-1375dx and it has windows 8 on it.

  The recovery disks can still be ordered for windows7

  Thank you

  TX2-1375dx is pre-installed with Windows 7 according to HP. see the following link for the specifications:

  http://support.HP.com/us-en/document/c01890532

  You can order the recovery kit of Windows 7 for your model of order recovery media section in this link (Windows 7 64-bit):

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=4041817#N1288

• Blue screen during installation of Windows XP on my Touchsmart TX2

  Hey guys.

  l am trying to install Windows XP on my new HP Touchsmart TX2, but the startup configuration every time l, the Tx2 stops with a blue screen when loading drivers. l tried with several discs, even those created with nLite and understood the SATA drivers, but nothing has worked.

  Does anyone else have this problem?

  Thank you

  Nightmare

  @Nightmare,

  You need to integrate your drivers Sata (only x 86 drivers) with nLite.

  Here are the Sata drivers for you. Just unRAR it drivers with Winrar. (This driver is different then what gave you Cheryl.)

  Here you will find the file .doc with guide how to integrate this with Windows XP Sata driver. (You will need to open the Microsoft Office).

  Here you will find the file with the same guide *.pdf . (You must open the Acrobat Reader software. Download link for this program here. Select your language and your system it.).

  Also, remember that you use at least version of WinXP SP2 . If you have not got the version SP2 here you can download this service pack and here you have a guide to how to integrate this with XP file written by nLite.

  In nLite, you can even burn your new XP CD with these changes.

  I hope this will solve your problem.

• TouchSmart tx2-1370us: laptop found in the trash

  Yes, found this laptop in the trash. Replace the power adapter, it turns very well.  Problem is that the hard drive is a paperweight now. How to make a recovery disk? I get no option to order one of HP in the downloads section.

  Thanks for any help.

  Hi, @bullmecha :

  The page for your laptop on the link below product specification shows it came with Windows 7 Home Premium 64-bit.

  http://support.HP.com/us-en/product/HP-TouchSmart-TX2-notebook-PC-series/3999427/model/4041812/document/c01888937/

  I don't see that you can order a recovery disc for this model online but you may be able to order them by phone.

  Call HP at: 1-(800) - 474-6836

  If HP does them, you can always get a game from this provider no HP on the link below...

  http://www.computersurgeons.com/p-17159-recovery-kit-589307-001-for-HP-model-number-TX2-1370us.aspx

• AuthenTec AES1610 on HP TouchSmart tx2 1025

  I have3 a TouchSmart tx2 that I recently upgraded to Windows 7 Professional 64-bit with a clean install.  Everything works fine except for the AuthenTec AES1610 fingerprint reader.  I installed the drivers for it as DigitalPersona directly on the site of hp.  Device Manager tells me that my awesome biometric device works, but digital persona tells me that the drive cannot be detected and I connect my player or install the driver for it.  I looked online for this problem and found that DigitalPersona has compatibility issues with the latest driver for this drive.

  Performed troubleshooting.

  -Uninstalled and deleted the driver manager device and then checked for material changes that installed automatically the driver.  IN CASE OF FAILURE

  -Install an older version of DigitalPersona.  IN CASE OF FAILURE

  -Installed an older driver for Vista on my Win7 computer.  IN CASE OF FAILURE

  -A attempted to install the beta version of AuthenTec True Suite.  IN CASE OF FAILURE

  -J' I did other things but I don't remember and I have to go to class at the moment.

  Please help me, I spent weeks on this problem.

  OK, I downloaded on Mediafire.  Here is the link.

  http://www.mediafire.com/?m2av2qygjvm

  I hope this works.

• where is the fingerprint reader for a laptop of HP TouchSmart tx2-1025dx

  where is the fingerprint reader for a notebook PC HP TouchSmart tx2-1025dx help please

  Hernandezeric2, welcome to the forum.

  Here is a guide that has a video on how to configure the fingerprint reader.  It should show you the location of the reader.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• How can I install WIndows XP Tablet edition SP3 on TouchSmart tx2?-urgent

  My TouchSmart tx2 installed Win7. I want to install WIndows XP Tablet edition SP3. But it always becomes blue screen during the installation, even when I format the drive with win7. How do I do?

  Consult the following weblink where Daniel has provided detailed steps to overcome the Blue error screen when you try to install Windows XP:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/TD-p/114120

  Check out the link next where Cheryl provided the necessary driver links:

  http://h30434.www3.HP.com/T5/operating-systems-and-software/General-XP-downgrade-Guide-for-HP-laptops/TD-p/83267

• HP touchsmart Tx2-1020us keyboard and boot beep questions

  
  

  It was just the keyboard, I found one online for $14 and it's very simple to Exchange.
  Here's where I found it...

  http://www.Google.com/#q=HP+TouchSmart+TX2+keyboard&hl=en&safe=off&SA=X&BIW=888&BiH=479&TBM=shop&FP=1&BAV=on.2, or.r_gc.r_pw & cad = b

  and here is the manual.  Page 46
  http://h10032.www1.HP.com/CTG/manual/c01655860.PDF