HP TouchSmart Ultrabook 4 ENVY: power on password

Similar Questions

• HP TouchSmart Ultrabook 4 ENVY: Unknown devices in Device Manager

  Hi all

  I had to reinstall Windows 8.1 (x 64) on my ENVY of HP TouchSmart Ultrabook 4-1170EZ (P/N C1X23EA #UUZ) after a system failure caused when you try to install Microsoft One Note 2010. The system is now running, but Device Manager shows two unknown devices that are

  ACPI\HPQ0004\3 & 11583659 & 0
  ACPI\HPQ6001\2 & DABA3FF & 2

  Anyone know where to get the driver software for these devices? I wasn't able to find it on hp.com

  Thanks in advance

  Hello

  Please try:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

  Kind regards.

• HP TouchSmart Ultrabook 4 ENVY: fried, drive will NOT boot from usb

  Hard drive clicking on, definitely fried. Replaced by the new hard drive. No matter what I do, it will not start from the

  bootable USB key with windows 8 install on it.  Stick to boots on other computers.

  I press ESC to the maximum power that I can get the boot menu, F1 works great, F2 works very well.  If I select F9 for boot options, for bios F10 or F11 to restore it goes back to the found boot device, hard drive (3F0) asks me to press F2 for the diagnosis of sys, the screen flashes. will not change.  No matter what I try, I'm stuck in this endless loop.

  How can I put an operating system on this device?

  Model # c2k82ua #abl

  Nothing I've tried has worked. However, I have finally managed to make it work has that.  I disconnected the battery for the bios for a bit. After that, I could get in the bios setup. Still would not start from a good bootable USB then I activated the Legacy and set the boot order to boot from an external USB Cdrom. Reinstalled windows 8 and all is good now thanks for all the comments!

  Dave

• HP TouchSmart Ultrabook 4 ENVY. Code: 0 x 0000098

  Need help with my computer. It's a Windows 8 and when I start it up I get a screen that indicates the recovery of your PC needs to be repaired. The Boot Configuration data file contains no valid information for an operating system. File: BCD error Code: 0 x 0000098 you'll need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the PC manufacturer. I do not have installation media and I called. So please help! I contacted HP and they said I have to get help from Forums of HP I do... So please help!

  Fixed it myself! Tinkering with it. Need help ask me questions!

• HP Envy Ultrabook 4: Power on password or admin password?

  My laptop HP Envy Ultrabook 4 keeps giving me a problem when booting. Ask an administrator password or power on password. None of my passwords work and it crashes me and gives me a code.

  My code is 85374293

  Hello

  Use the code to reset below

  30052815

  Or generate it from the link below

  http://BIOS-PW.org/

  1. use the unlock code you generated to enter BIOS

  2 disable all passwords that are enabled in the Security menu of BIOS.

  3. If the request for current password - enter the unlock code

  4. for the new password, simply press the ENTER key

  5. repeat the same thing to check the password column.

• Trying to find advanced settings of the BIOS on my envy Touchsmart Ultrabook 4

  I'm trying to locate my envy Touchsmart Ultrabook 4 power management settings.   I am running the Insyde BIOS verision F.23.  When I open the BIOS to F10 (I also tried F10 + A with no result) before starting the only options are to hand, security, System Config. in and out.  Is anyway to get the advanced settings in the BIOS?  Thank you.

  Woodyzen3000,

  I understand that you are looking for the power management option in the bios.

  After doing some checking this bios has no option for the management of food as some old versions of some time got back on our old systems. I was actually able to get their hands on a similar Ultrabook built with the same version of the bios and the options are no longer present.

  It is possible that perhaps a next version will be the available option. In order to keep an eye on this link because the future updates to the bios would be here. You simply enter the product number, and then select your operating system.

  If you have any questions do not hesitate to ask.

  Thank you

• HP envy 23 all-in-one: enter the password administrator or power on password

  I have a HP ENVY 23 all-in-one

  series [personal information deleted]

  When I turn on

  show me on the screen

  "ENTER THE POWER ON PASSWORD"

  CAN YOU GIVE ME THE PASSWORD TO THA

  Page 22:

• Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

  Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

  Hello

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo.
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select disable from the list.
  6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

  When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

• Envy Touchsmart Ultrabook - boot from Usb Flash or optical drive

  I just this envy Touchsmart Ultrabook (14 inches) with 8 win and it works very well, but one thing that I can't make it work is to be able to boot from a USB stick or a cd usb player.  This system doesn't have a built-in optical drive.

  I changed the configuration Bios Boot UEFI for Legacy and also re arranged the boot order so the USB drives are before the internal hard drive.  I also tried to change setting USB 3 auto... still not able to boot from a usb device.

  Both the usb flash drive and cd drive to boot on my HP desktop and I recently tried the usb flash drive on a new laptop Lenovo comes with Win 8 and it worked.

  I need to do so that I could run my backup - Acronis True Image software.

  Any suggestions on what then try?  Thank you.

  Yours is a laptop very different mine - so this may not apply... but you can try what I posted here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/bios/m-p/2260991

• Envy 17-K219TC: admin/power on password hp

  Hi guys, I have a problem with a laptop with a power on password just popped up one day. the code that appears after failing two times is 79429634. could someone please help. laptop is an envy earlier this year bought 17

  Hello

  Come in:

  66581210

  Concerning

• HP envy admin power on password

  on my hp envy14 I was invited for admin/power on password failing 3 x he says now disabled system [73779038] can someone help me pls.

  Hello

  Please try:

  62651018

  Kind regards.

• HP envy 360: I forgot the power on password for my

  Hello
  
  I need help, I forgot the power on password and I have a blue box with a number of disabled system 51642369
  
  Please let know us what I'm doing!

  @Tolba7

  Enter 44720969

• Laptop of HP Envy m6-1210 / enter the password administrator or power on password

  When I turn on my laptop I can't past the screen "Enter password or power on password"

  Help, please

  Hello

  Please try:

  30981576

  Kind regards.

• Pavilion touchsmart 15 l: enter the administration password or power on password

  Powered on my computer and got this message
  Enter the administration password or power on password
  Entered the password in wrong 3 times and got this number
  61704252
  Help please!

  @Jstoth01

  Enter 74662894

  Kind regards

  DP - K

• HP envy: enter the administration password or power on password

  When you start it says
  
  Enter the administration password or power on password
  
  Then, after 3 attempts failed
  
  It says disabled system
  [50790401]

  It worked! Thank you!