HP TouchSmart Ultrabook 4 ENVY: Unknown devices in Device Manager

Hi all

I had to reinstall Windows 8.1 (x 64) on my ENVY of HP TouchSmart Ultrabook 4-1170EZ (P/N C1X23EA #UUZ) after a system failure caused when you try to install Microsoft One Note 2010. The system is now running, but Device Manager shows two unknown devices that are

ACPI\HPQ0004\3 & 11583659 & 0
ACPI\HPQ6001\2 & DABA3FF & 2

Anyone know where to get the driver software for these devices? I wasn't able to find it on hp.com

Thanks in advance

Hello

Please try:

http://h20565.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_125640_1

http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58720.exe

Kind regards.

Tags: Notebooks

Similar Questions

  • P 8470 & HP HP 8440 P: upgrading to W10 Pro 64 bit / device Reporting - unknown device manager

    I have recently upgraded to Windows Pro 64-bit 10.  Machines involved are - 8440p & 8470p running W7 Pro 64-bit.

    The Device Manager shows an unknown device - ACPI\HPQ6000\3 & 33FD14CA & 0.

    Could someone tell me what this is in reference to.  Perhaps point to a driver that I could update.

    Thank you / / Jeff

    You are the very welcome.

    The reason why you don't see the driver is because most of the drivers are missing in support pages, which have not worked directly for HP split into 2 companies from 1 August.

    This is certainly the driver you need.  If the version of W7 works, I can't say.

    See if it works.

    FTP://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59282.exe

    If this driver does the same thing...

    Go to Device Manager and click on the unknown device of 6000 who need pilots.

    Click on the driver tab, click on set to update driver.  Select her browse my computer for driver software option, then at the bottom of this window, let pick me from a list of drivers for devices on my computer.

    Click on disk and go to C:\SWSetup\sp59282\accelerometer and select the HP Mobile Data Protection sensor and see if the pilot goes like this.

    Here's a partial copy and paste of the accelerometer installation information file.

    As you can see the device is supported by the driver.

    But it's the most recent driver is there, I know.

    [Manufacturer]
    Mfg % = HP, ntamd64

    [HP.ntamd64]
    DeviceDesc % = HPAccelerometerDriverInstall.ntamd64, ACPI\HPQ6000

  • HP TouchSmart Ultrabook 4 ENVY: fried, drive will NOT boot from usb

    Hard drive clicking on, definitely fried. Replaced by the new hard drive. No matter what I do, it will not start from the

    bootable USB key with windows 8 install on it.  Stick to boots on other computers.

    I press ESC to the maximum power that I can get the boot menu, F1 works great, F2 works very well.  If I select F9 for boot options, for bios F10 or F11 to restore it goes back to the found boot device, hard drive (3F0) asks me to press F2 for the diagnosis of sys, the screen flashes. will not change.  No matter what I try, I'm stuck in this endless loop.

    How can I put an operating system on this device?

    Model # c2k82ua #abl

    Nothing I've tried has worked. However, I have finally managed to make it work has that.  I disconnected the battery for the bios for a bit. After that, I could get in the bios setup. Still would not start from a good bootable USB then I activated the Legacy and set the boot order to boot from an external USB Cdrom. Reinstalled windows 8 and all is good now thanks for all the comments!

    Dave

  • HP TouchSmart Ultrabook 4 ENVY. Code: 0 x 0000098

    Need help with my computer. It's a Windows 8 and when I start it up I get a screen that indicates the recovery of your PC needs to be repaired. The Boot Configuration data file contains no valid information for an operating system. File: BCD error Code: 0 x 0000098 you'll need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your system administrator or the PC manufacturer. I do not have installation media and I called. So please help! I contacted HP and they said I have to get help from Forums of HP I do... So please help!

    Fixed it myself! Tinkering with it. Need help ask me questions!

  • HP TouchSmart Ultrabook 4 ENVY: power on password

    I have a HP Envy that I can't get past the power on password, it gives me disable code of 85903248.  Could someone make me a password that will get me past this?

    Thanks Robert

    Hello

    Try this: 30661888

  • Portege M200 - device unknown in Device Manager

    I did a clean install of Windows XP on my toshiba portege m200 (Tablet). I have most of the devices drivers installed, but there is one that I can't understand. The device manager says I have an "unknown device" on my "Intel 82801 dbm lpc interface controller.

    What is it? I thought it was the chip set, but I had installed the Intel chipset drivers (twice, just to make sure that I really did), but it still reads as 'unknown device' on ' Intel (r) 82801DBM LPC Interface Controller - 24CC.

    To resolve this issue go to the device, right click on the unknown device, Manager and then select set to update driver.
    When the Hardware Update Wizard appears, select the advanced option.
    From the next window, select the 'don't search. I will choose the driver' option
    Now, go to the Intel announcement and select good "82801DBM LPC Interface Controller - 24CC.
    Click OK and now it should work.

    Also, be sure you have all the drivers installed from Toshiba Web site:
    http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  • Unknown device on the Satellite A100-153, after BIOS update to 5.1

    ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

    Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

    Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

    Hello

    ACPI-> Advanced Configuration and Power Interface
    ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
    For example: ACPI is necessary for the standby and hibernation mode.

    Now your question; the new BIOS has been updated and configured to using VISTA.
    It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

  • Re: Satellite 5200 701: unknown device in Device Manager.

    Hello.

    It WinXP Pro + SP 3.
    In the display devices, such as an unknown device manager. Try all of the pilots, who were on a disc with the laptop, nothing helps. Give the solution!

    I still use Windows XP Home with Service Pack 2 and I'm really happy with it. If you have some problems with SP3 remove and continue to use Windows XP Home with Service Pack 2 only. Satellite 5200 is quite old but very nice laptop. Make sure that the laptop works fine with SP2 and you have an application of good-antivir.

    Simply to operate Satellite 5200. I noticed that many people have reported on various issues after installing SP3. Exactly the same thing with Vista SP1.

  • Satellite L650-1NC - Map disappeared WLAN Device Manager

    Hi guys!

    I bought the Satellite L650-1NC. After installing the system, everything is ok, but no wireless card. I downloaded the latest drivers from Toshiba and manufacturer sites. After you have installed the latest drivers for the wireless card disappeared from the Device Manager! Connection via cable, works without problem. Exhausted all ideas. Help, please.
    Operating system: Windows 7 64-bit
    Wireless card: Realtek Wireless LAN adapter 8191SE/8192SE

    PS. Sorry for my English

    Hey,.

    The WLAN card is listed in the device as unknown device manager or it is completely gone?

    It's probably happened due bad installation driver in your case, I recommend removing all WLAN drivers and run CCleaner tool to clean the registry. Then download & install the latest official Portal WLAN WLAN drivers:
    http://APS2.toshiba-tro.de/WLAN/

    Also, make sure that the wireless network adapter is enabled. This can be done with the FN + F8 key combination.

  • Help! Disable the touch screen on Envy Touchsmart Ultrabook 4

    Hi, I have a problem, try to disable the touch screen of the Envy Touchsmart Ultrabook 4 function in Windows 8... I was looking for an answer on how to do it, but I did not find anything. I tried the method of the control panel > hardware and sound > pen and touch and then disable the option "use your finger as input device", but this option is not there for me! If anyone knows how to do this, I would be very grateful.

    Hello

    I have another type of TouchSmart, but this may work for you:

    1. Press Windows + X logo.
    2. Select Device Manager from the list.
    3. Click on the small arrow next to Interface devices to expand the list.
    4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
    5. Right click and select disable from the list.
    6. Click Yes in the dialog box that asks you if you are sure you want to disable the touch screen driver.

    When you want your touchscreen to work again, follow the above procedure, EXCEPT when right-clicking on the touch screen driver, select enable.

  • Envy Touchsmart Ultrabook - boot from Usb Flash or optical drive

    I just this envy Touchsmart Ultrabook (14 inches) with 8 win and it works very well, but one thing that I can't make it work is to be able to boot from a USB stick or a cd usb player.  This system doesn't have a built-in optical drive.

    I changed the configuration Bios Boot UEFI for Legacy and also re arranged the boot order so the USB drives are before the internal hard drive.  I also tried to change setting USB 3 auto... still not able to boot from a usb device.

    Both the usb flash drive and cd drive to boot on my HP desktop and I recently tried the usb flash drive on a new laptop Lenovo comes with Win 8 and it worked.

    I need to do so that I could run my backup - Acronis True Image software.

    Any suggestions on what then try?  Thank you.

    Yours is a laptop very different mine - so this may not apply... but you can try what I posted here: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/bios/m-p/2260991

  • Envy for computer laptop 15-ah000na: unknown device ACPI HP envy 15-ah000na REF: M9F50A

    Hello

    Just installed new HDD for a laptop client.  And a clean install of Win10

    HP Envy 15 laptop

    Model: 15-ah000na

    Part number: M9F50A #ABU

    No. SER: CND52867SJ

    The usual controls and following all Windows updates I have 5 unknown as devices below.  Looked for the obvious sources, but cannot identify and find drivers for?  Can anyone help please?

    Thanks Steve

    Other devices-> unknown device 5

    1......
    ACPI\VEN_AMD & DEV_0010
    ACPI\AMD0010
    * AMD0010

    2......
    ACPI\VEN_AMD & DEV_0010
    ACPI\AMD0010
    * AMD0010

    3......
    ACPI\VEN_AMD & DEV_0020
    ACPI\AMD0020
    * AMD0020

    4......
    ACPI\VEN_AMD & DEV_0020
    ACPI\AMD0020
    * AMD0020

    5......
    ACPI\VEN_ASD & DEV_0001
    ACPI\ASD0001
    * ASD0001

    Hello:

    Download and install the AMD Chipset drivers from the link below and restart the PC.

    You want the first file on the Web page.

    http://support.AMD.com/en-us/download/chipset?OS=Windows%2010%20-%2064

  • HP ENVY 15 Notebook PC: unknown device on PCI Express Root Complex

    Gentlemen.

    Recently bought the HP Envy laptop and upgraded to Windows 10 immediately.

    HP ENVY 15 Notebook PC
    15 - k200na (ENERGY STAR)
    L0C83EA #ABU

    10 64-bit Windows Home

    Device reporting Manager: unknown device on PCI Express Root Complex

    Hardware ID:

    ACPI\VEN_HPQ & DEV_6007
    ACPI\HPQ6007
    * HPQ6007

    have been unable to solve together searched a lot!

    Can you please help.

    Thank you

    Dave

    Hi, Dave:

    You need this driver...

    This package provides the HP 3D DriveGuard software (HP ProtectSmart Hard Drive Protection) for the laptop models running a supported operating system. HP 3D DriveGuard software protects the drive hard by parking the heads if cell phone accidentally falls, or is suddenly struck by another object.

    File name: sp71811.exe

  • Trying to find advanced settings of the BIOS on my envy Touchsmart Ultrabook 4

    I'm trying to locate my envy Touchsmart Ultrabook 4 power management settings.   I am running the Insyde BIOS verision F.23.  When I open the BIOS to F10 (I also tried F10 + A with no result) before starting the only options are to hand, security, System Config. in and out.  Is anyway to get the advanced settings in the BIOS?  Thank you.

    Woodyzen3000,

    I understand that you are looking for the power management option in the bios.

    After doing some checking this bios has no option for the management of food as some old versions of some time got back on our old systems. I was actually able to get their hands on a similar Ultrabook built with the same version of the bios and the options are no longer present.

    It is possible that perhaps a next version will be the available option. In order to keep an eye on this link because the future updates to the bios would be here. You simply enter the product number, and then select your operating system.

    If you have any questions do not hesitate to ask.

    Thank you

  • HP ENVY m6 - 1188ca Notebook PC: Bluetooth, network controller, PCI device &amp; amp; Unknown device drivers is not available

    HP ENVY m6 - 1188ca Notebook PC

    64-bit Windows 8

    Hardware ID:

    1 Bluetooth controller

    PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034 & REV_00
    PCI\VEN_0814 & DEV_1288 & SUBSYS_18AC1034
    PCI\VEN_0814 & DEV_1288 & CC_0D1100
    PCI\VEN_0814 & DEV_1288 & CC_0D11

    2. network controller

    PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C & REV_00
    PCI\VEN_1814 & DEV_2290 & SUBSYS_18C8103C
    PCI\VEN_1814 & DEV_2290 & CC_028000
    PCI\VEN_1814 & DEV_2290 & CC_0280

    3. Pci device

    PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C & REV_01
    PCI\VEN_10EC & DEV_5289 & SUBSYS_18A6103C
    PCI\VEN_10EC & DEV_5289 & CC_FF0000
    PCI\VEN_10EC & DEV_5289 & CC_FF00

    4. unknown device

    ACPI\VEN_HPQ & DEV_0004
    ACPI\HPQ0004
    * HPQ0004

    Hello:

    Try these drivers...

    Wireless:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_148570_1 #tab1

    Bluetooth:

    http://h20565.www2.HP.com/hpsc/SWD/public/detail?s wItemId = ob_147890_1

    Dev PCI:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp58542.exe

    HPQ0004:

    This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

    File name: sp61037.exe

Maybe you are looking for