HP tx r014 15: replace the laptop hardware

I saw buying hp 15 laptop tx r-014 6 months ago and you want to replace 1 TB 512 GB SSD HARD drive

also want to increase the RAM of 4 GB to 8 GB so how do I do this. and want to also know my continued warranty or not.

Here is the Manual:

Link to the manual

Your model has 2 memory slots, but it is necessary to remove the motherboard to get access. See page 76. It takes DDR3L-1600 SO-DIMM memory and to get to 8 concerts you would just add another 4 GB module. The hard drive slot is also accessible only by removing the top cover. You can replace with a SSD for the hard drive.

This isn't your exact but very similar model and top cover removal shows that video clips:

http://support.HP.com/us-en/document/c04324972

Technically, none of these operations is permitted for end-users, but HP will continue to honor the warranty, as long as no damage is done in the process. You should have an experienced technician handle it, especially the upgrade of memory.

If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

Tags: Notebooks

Similar Questions

  • Mistake to replace the laptop battery HP Pavilion DV42161nr/entertainment

    When I start my PC, I get an error message that the battery is very low and must be replaced.

    Also I am not able to run my laptop without power cable.

    Please answer.

    It seems to me that you have a defective battery.

    There should be an icon in the 'System Tray', which, once selected warns talk you about the State of the battery and if he is in charge.

    When selecting this icon and you are informed that the battery it will also give you a % of the battery charge State.

    So, when you remove the laptop from the charging unit and this icon shows 'BATTERY LOW '.

    Solution would be to replace the batteries.

    Hope this helps

  • How to replace the laptop on G60 keyboard

    Trying to find a manual for HP G60-230US laptop replace the keyboard.

    Hello:

    Here is the service manual for your laptop on the link below:

    http://h10032.www1.HP.com/CTG/manual/c02985882.PDF

    Paul

  • Pavilion g6 - 2240sa fan needs replaced or it will be cheaper to replace the laptop?

    My HP Pavilion g6 - computer fan portable 2240sa just stopped working? No warning strggeling or noise? He just stopped. You can buy a new one for a tenner, but to fix it myself that I had to disassemble the mobile complete to access (not sure about the tent) but the only place where ever I can find to be considered for repair is PC World (probably safe to give to a child) and his £50 to tell me what I know While they charge to send him off, then reload on the sides for a part and put it in.

    It is worth when it may be overheating of CPU and ram also damage?

    When I pick up a new laptop for £450?

    I think it's probably that the printing if you do it yourself.

    Here is the Manual:

    Repair manuals

    As you noted here is the part for a little more than a tenner:

    http://www.eBay.co.UK/ITM/new-HP-Pavilion-680551-001-CPU-cooling-fan-4-wires-/161141506253?PT=Computing_ComputerComponents_Fans_Heatsinks_SR&hash=item2584c840cd

    If you invest 11 books and one or two hours. It is very unlikely, there's no additional damage and a new fan should put right.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Question about replacing the battery in Aspire E15 E5 - 574 G

    So, I bought an Aspire E 15 E5 - 574G from newegg because I need a new laptop and did not want to spend a lot of money. What never occurred to me until after that I paid because it was the battery was replaceable, further research after that newegg delivered to me, I discovered that it wasn't. I wonder if someone could tell me if the battery goes bad can I send the computer to acer and I got the fixed battery or I'll essentially having to buy a new laptop when he dies. I need a laptop with a battery that is replaceable, because I handle my machine a lot, if the battery is really not replaceable reliable, so I was wondering if I should ship the computer to newegg a refund and look for a computer acer laptop with a battery that I can replace.

    Thanks for any help

    First thing, you need to check, the laptop that you bought from Newegg is under warranty or not. To help you check this, please find the link given below and enter the computer laptop serial number of product on the area of warranty status:
    http://www.Acer.com/AC/en/SG/content/SG-check-product-warranty-expiry

    If it is under warranty, you can request a replacement battery, please find the link below to contact Acer's Support Center:
    http://www.Acer.com/worldwide/support/

    If the laptop is not under warranty, it is recommended to approach Newegg to replace the laptop.

    If you are considering buying a new laptop, it is suggested to buy HP, Lenovo or any top brand laptop Acer configuration according to your choice.

    Hope this will help you.

  • Replacing the dv6-7014nr autour former hard drive - it'll work?

    Here's my dilemma:

    My new dv6 7014nr, customized by the dealer with performance 12 GB of RAM and a disc of hybrid SSD 750Go (best decision I did!), has a bad keyboard: the 'C' button keeps jumping off the power. They offered to replace the laptop.

    Problem is, I have sensitive data on my hard drive and I want him to stay here. So, here's the plan:

    I'm very comfortable in pulling the hard drive and leave it here. The dealer will build me a dv6-7014nr, 12 GB RAM, SAME performance all the same and ship it to me without a hard drive. I've happily jump in my 'old' hard drive and rock on.

    Which will work? Or the new material causes non repairable conflicts?

    Thank you!

    Welcome! And thanks for posting your question.

    If the machine is, like you say, identical, there should not be any conflicts. In theory, any SATA hard drive should power be removed to any machine and placed in another computer SATA or external drive Bay. The only exception would be if your drive was encrypted. What suite of Windows is installed on the hard drive? (7 or 8? Home Premium or professional?)

  • Computer laptop G62 crashed and now it gives error "unable to open because of the recent hardware or software error"

    I have a new problem with my PC. My laptop suddenly crashed. It was working fine before this, but while I was watching a movie, it's just off. I tried to restart but it gave me the error that it cannot open because of software or a hardware error. It gives me two options: 1. to try the Startup Repair tool. 2. to open Windows normally.

    I tried to open it normally, but it redirects me to startup repair. The Startup Repair is unable to do anything.

    =================================================================================

    Startup Repair can try to restore your computer to an earlier point in time when it worked correctly.

    This repair will not personal data change, but it can remove some programs that have been installed recently. You can't undo this restoration.

    =================================================================================

    Then I tried to restore my PC to a previous restore point, but it won't let me continue once I've selected a point. It only shows my C drive which is grayed out so I can't select and continue. It gives me a yellow warning saying that the Protection of the system disk must be enabled.

    So as the restoration is not an option, I went to the recovery of the system where it will restore my factory settings, deleting all data. The problem is that I have a lot of valuable data in the PC, so I don't want to do this before you have a back-up. I tried to make the back-up, but the first back-up was arrested at 78%. The second he stopped at 13%. After that all other attempts to create a backup stops at 25%.

    I don't understand what to do. People say it's a problem with Windows 7 (64-bit). I don't have a Windows 7 CD either because it was pre-installed when I brought. I have an original CD of Windows Vista so I'll try to install first. Then, I'll try to copy my data and then restore my laptop to its factory settings. I hope this works.

    A guy suggested to replace the names of readers. So I reversed the C drive and D drive. He showed me all the readers in the restore option. But the restore has failed. Then he renamed automatically drives to their original state. I even ran sfc/scannow, but it shows me that a scan is planned and restart the PC to start. But when I reboot, it gives me the same thing again.

    Please suggest what to do...

    I installed Windows Vista professional from the CD. It worked perfectly... I want to say that I was able to retrieve all my data because it stored in a folder called Windows.Old

    But since I could not the wifi adapter and integrated graphics card Intel to work on the PC, I tried to restore factory settings. It doesn't let me access the Recovery Manager by pressing F11 on reboot I went to the computer icon and right-click on it. I selected manage and made my recovery disk a partition active. So after reboot it properly started the Recovery Manager. Right now I'm it back to factory settings. I'll let you know what happens after that. My data is safe, but I don't know if I'll be able to load my original OS.

  • HP G61-322NR: how to replace the hard drive of my laptop

    I'm new, please help.  Hard drive my laptop has failed and must be replaced.  Can I order a similar disk (a 160 GB SATA drive) on ebay.  Question: when I receive and replace the disk, what steps should I take to the BIOS of the laptop to recognize the new disk, make the primary, and then install the operating system Windows 7 from my recovery DVD?

    Perhaps the BIOS sees the drive automatically and I can simply use the Reccovery DVD?

    Thank you!

    It really is exactly as simple as that. And I'm glad that my metaphor of the car has been heard.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Replace the drive of my laptop in a Toshiba Satellite 5100/5105 - experience?

    I intend to replace the defective CDRW/DVD drive in my Toshiba Satellite 5100 503 (European version, it was sold as 5105 in the United States and other countries).
    The disk is a UJDA730.
    Update, I consider the much appreciated a Slimline DVD +/-RW drive. Unfortunately, some internet research revealed that the upgrade to optical laptop drive is not as simple as one would hope. I had no trouble to remove my old drive (just remove the keyboard and unscrew the two screws), so I consider myself to be able to put in a new drive instead. However, two problems remain:

    -mechanical compatibility: the 6500 has seems to have a different layout of collar. The eject button and the LED are in a different position from that of my current drive, so I doubt I'll be able to use my old glasses with it. In addition, the bezel from my old drive has a niche in the lower right corner (similar to that found on some laptop computers Fujitsu-Siemens), which gives place to the volume control on the laptop. So I can't reuse the old bezel and bezel of the NEC will probably not allow me to close the CD tray. I wonder if some Dremel work on the plastic parts of the NEC drive will allow me to physically. Anyone who has tried?

    -electronic compatibility: computer laptop drives don't usually have jumpers to change their configuration of master/slave/cable selection. Instead it is located in the firmware, change so it is flashing a new firmware, which is not easy to find and hard to do if your drive is still not recognized. SO I need to know if my notebooks is the optical drive set to master, slave. CSEL or 'inverse cable select. " Can someone help me here, either by own experience pointing me to a relevant source on the web?

    Hello

    as a first step in a Satellite 5100 CD player is fixed mounted and can only be replaced with the same model! Another model might work, but as you can see the bezel fits and maybe the new drive does not match 100%. So you will have problems all the way!

    What do you think about an external solution via USB or Firewire. It's the best way to upgrade!

    To bye chris

  • How to replace the keyboard on a Toshiba laptop? SOLUTION

    If your Toshiba laptop keyboard does not work as it should?

    If your keyboard problem comes from a spillage, a hard lump, or you simply worn, you don't have to worry about investing in a new laptop, you can solve your keyboard with a simple Exchange. The good news is that setting a keyboard does not have a lot of technical skill. In fact, keyboards are among the mobile more easy to repair.

    Remove the frame just above the keyboard. You will notice a Tin strip of plastic located just above the keyboard. This band is called the keyboard bezel and you remove by gently lifting the edge upward with your small standard screwdriver. Work your way through the bezel lifting as you go. The bezel is that a nod to the unit, so remember to be gentle, as you work your way through.

    Remove the screws from the laptop keyboard Toshiba G83C000872. When the frame is removed, you will find three or four screws at the top of the keyboard. Using your small Philips screwdriver, remove these screws and place them in a safe place where you will not lose them.

    Remove the keyboard. With the screws removed, gently lift the keyboard from the top down. You will notice a sliver of wire from the keyboard to the laptop. Lean toward the front of the keyboard so that you can access the ribbon cable connection.

    Remove the Ribbon wire. Take your standard screwdriver and gently push up the support locks, on both sides of the ribbon cable socket. These support slide locks up slightly as you push to release the wire.

    Connect the keyboard to replacement. Everything as you have removed the old keyboard, you will now push the replacement wire Ribbon in Ribbon decision-making. With a small screwdriver, push the brackets in place to fix the Ribbon.

    Screw the replacement keyboard. Using a screw, connect the keyboard. With the keyboard which is held in place by the screw, start the computer and test the replacement keyboard. Once tested, replace the remaining screws.

    Insert the bezel above the keyboard. With the keyboards now set by all the screws, place the bezel back on its opening and put it back. Start at one end and work your way through.

    Thanks for teaching.

  • Hello, hp laptop laptop touch ac157cl 15 energy star replaced the hard drive, but do enter the bios password!

    Hello, hp laptop laptop touch ac157cl 15 energy star replaced the hard drive, but do enter the bios password! Help, please!

    Thank you!

    Hello

    Enter 45581394

    Kind regards

    DP - K

  • How to replace the hard drive in a laptop G500

    I tried to install openSUSE Linux on my new G500 12.3 and were unable to do so. I think there is a problem with the hard drive so I want to replace it. I worked on other phones and they all live on the base which allow you access to the memory and the hard drive. The G500 mouse does not work. How it is falling apart?

    Hi nlgootee,

    Welcome to the Community Forums of Lenovo!

    You will need to remove the screws in the compartment

    After that you must slide the cover toward the front of the laptop.

    Note: Be careful on the removal and replacement of parts, any physical or cosmetic damage will not be covered.

    Best regards

    Solid Cruver

    Cheers!

  • Computer laptop 15-ac152sa: replacing the hard drive

    I need the service for HP laptop 15-ac152sa guide to replace the hard drive, but I can't seem to find it anywhere. Can someone point me to it?

    Please see the HP Notebook PC (Intel) HP 250 G4 laptop HP 256 G4 Notebook PC - Maintenance and Service of Guide for instructions on the replacement hard drive.  Removal/replacement of the hard disk in this model is listed as a "procedure for only authorized service providers.  It requires the removel of many small screws and other items to get to the hard drive.

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • Pavilion dv6600ev: I would like to replace the HARD drive and the RAM in my HP laptop. I want to check compatibility

    Hello guys. I would like to replace the HARD drive and the RAM in my HP laptop. I would check the compatibility. For the momemt, I have 2 x 512 MB of RAM and a 160 GB HARD drive. Does anyone know the type of RAM (DDR1 or DDR2 most) and the accepted maximum capacity. Also the SATA port is a SATA I? Besides, I'm going to change the operating system (preferably in Win 7) so is there a driver?

    You can install DDR2-800 modules and they are the most widely available at this point, but the memory will run at 667 mhz speed.

    If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

  • Model: G6-1D98DX, refurbished: renovated pavilion laptop g6, replace the fan with what?

    When I powered my laptop Pavilion G6 refurbished, it gives a disturbing message on the fan turns not and the processor of cooking and automacially stops in 15 seconds. OK, replace the fan.

    By the? appropriate? HP 'Maintenance and Service of Guide' (Doc PN 649111-002), I took part BUT Guide HP, the processor heat sink is held by 7 screws... only it renovated its heatsink is a model of 4 screws, and the motherboard was ever available for 7 screws.
    How to order the appropriate and/or fan-with-heat sink fan? the fan-with-heat sink seems to be a unit

    use data created on the fan or radiator Assembly to try to find a part on google or ebay.

    http://www.eBay.com/ITM/new-OEM-HP-Pavilion-G6-G6-1000-series-cooling-fan-with-heatsink-641024-001-4-pin-/251637960612?hash=item3a96ca8fa4:g:dTsAAOSwq5lTmneN

Maybe you are looking for

  • problem starting after trouble disconnecting an external hard drive

    Starting system but touch panel (Mouse) doesn´t work. Shows a window with an error message "not properly disconnected hard drive '. Is the possibility of everything during the priming by press some special help keys?

  • Re: Equium P300-190 - multimedia keys doesn't light up or work

    Multimedia keys between the speakers on my Equium P300-190 have suddenly stopped working and illuminating, the power button and the bar at the top of the touchpad still turn on any ideas how solve this problem? Thank you

  • s dll

    What's Commontools12.dll of SPC and where I can find. Tried to do a reboot and told me it was missing. boong

  • E250 does not convert or display video files

    I've got the sansa e250.  Version V03.01.11A.  Not sure on my firmware version, I couldn't find that.  The thing is very new.  I just got it 2 days ago.  I copied and pasted video files for it, but they won't play.  They appear in the file on my comp

  • WAG 120N as switch

    A big hello to the community. How are you? Hope that all is well with you all. Can I ask for help, please? I have a router WAG120N and I want to use as a switch. My setup is the following: NETGEAR DG2200N modem-router and wireless on the 1st floor (I