HP Vista computer will enter into the 'sleep' and not to wake up?

The computer will go to sleep while I'm on after about 10 minutes of use, and then, I am not able to wake up.  I have to turn it off and sometimes when I turn back on it will start in safe mode window.  I can't even run my antivirus because the computer did not stay long enough.  I checked the power plan settings and also tried to restore but he fell asleep before finishing.

Hello

1 I want to erase the General corruption and repair/replace damaged/missing system files:

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228

Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

-------------------------------------------

Shoot sleep problems - hibernation
http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

How to solve a problem of Mode for Vista and find a Solution
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
http://support.Microsoft.com/kb/950686

Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
and other devices. (Double click on the device and the power management tab)

Panel configuration-Control Panel Home view (non-conventional) in the top-right search pane
type of hibernation - see turn Hibernate on / off

All the default power plans and then set them as you wish.

I hope this helps.

Tags: Windows

Similar Questions

  • Try to burn images on a cd to make them playable on home dvd player. the computer will burn on the cd and the images will not play on a DVD player? any help would be great.

    Try to burn JPEGs on a cd in "master" mode to make them playable on standard dvd players. the computer will burn on the cd and the images can be viewed on another computer, but cannot be viewed on a DVD player? any help would be great.

    Hello Lackyboi,

    ·         How you try to burn the pictures on your CD?

    ·         What is the burning software CD that you use to burn the discs?

    I suggest you burn your photos using Windows Media Player.  You can read this article which will give you information on burning media with Media Player:

    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player

    1. in Windows Media Player, on the Tools menu, click Options.

    2. in the Options dialog box, on the devices tab, click the name of the reader of CD - R or CD - RW you use and then click on the properties button.

    3. in the Properties dialog box, under the recording tab, select a slower write speed.

    Thank you
    Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

  • my windows vista computer will not except the automatic updates and the system starts it configures only the updates

    original title: my windows vista will not except the automatic updates and the system starts it will only configure the process which can be done to solve this problem

    my windows vista computer will not except the automatic updates and when the system starts it will only configure the process which can be done to solve this problem

    Hi Glennisidore,

    Try running the fixit http://support.microsoft.com/kb/971058 in aggressive mode and see if, after the reboot, you are able to perform your edits again.

  • Computer always goes into mode 'sleep' even if I chose to never sleep

    Original title: the power settings

    When I go into power settings and put the computer to sleep, I choose NEVER.  The reason why I have some backups that take a long time.  However my computer always goes into the mode after a certain time. I've been through this several times.  How can I fix it? Thank you

    Hello

    Make sure that you are logged as an ADMINISTRATOR to make changes to the power (sleep) or others.

    Are you sure that you have those established in all Power Options? (There may be more than one).

    Check the change Plan settings - change advanced power settings

    Check the change when the computer sleeps

    Is - that go to sleep or is the active screen saver?

    Right click on the Desktop - Customize - screen saver.

    ==================================

    These might help:

    Windows 7 problem with sleep and Hibernate Options - see the troubleshooting section
    http://www.computerperformance.co.UK/Windows7/windows7_sleep_problem.htm

    How to solve a problem of Standby Mode Vista and find a Solution - also applies to Windows 7
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    Sometimes reset power Plans to default values help and then put them as needed.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to disable and re-enable hibernation on a computer that is running Windows http://support.microsoft.com/kb/920730

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    How to manage Hibernate Mode in Windows 7
    http://www.howtogeek.com/HOWTO/7564/how-to-manage-Hibernate-mode-in-Windows-7/

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    How to restore the default settings of the power Plan in Windows 7
    http://www.SevenForums.com/tutorials/950-power-plan-restore-default-settings.html

    How to change the power Plan settings in Windows 7
    http://www.SevenForums.com/tutorials/778-power-plan-settings-change.html

    How do I change the sleep settings in Windows 7
    http://www.brighthub.com/computing/Windows-platform/articles/60294.aspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • computer randomly goes into mode 'sleep' when typing

    I have a new Acer Aspire 4820 t running windows 7 Home premium. I have a problem with the computer will randomly in mode 'sleep'. This seems to happen especially while I'm via remote desktop, although not entirely. The computer does not heat and I turned off "sleep" mode completely or at least thought I have.

    I can be typing at the moment then actually use the keyboard. Incidentally, this is the second computer, it happens that I sent the first back thinking it was a hardware problem.

    Any help would be appreciated

    Dear Mike,

    Try this by the solution of the box. It worked for me:

    Dear mn2rgorillaz,

    I am a computer repair technician, and suddenly one day I started having the same problem, 12/09/2011 in fact.  I tried everything, reboot the computer, the bios flashing, change all settings to never sleep and none of them worked.  I always had the same problem with my computer go to sleep in the middle of my typing, all random, of course, I could type a paragraph or a letter and PAF suddenly that he would go to sleep.  I was very frustrated, I sat for an hour and has thought of everything that had happened that day to try to understand what it might have been.  I didn't think the worst (bad mother).  It took me a little bit, but it finally hit me.  I bought this pretty new braclet that day, one of those magnetic which is supposed to help with arthritis and carpol tunnel syndrome.

    As a computer tech, I felt really good because as all of us in the field will tell you computers + magnet = cloudy.  I do not think that anything of it when I bought and had already forgotten that I was wearing it.  Bingo, it took off about 10 minutes ago and I was seized as a crazy for woman.  No problem what so ever.  Just thought I'd throw it out there in case you might just wear the said kind of braclet.

    -------------------------------------------------------------------------------------------------

    LARGE Leah, I think you nailed!

    My acer as3810T started with this mysterious behavior also and I have also updated the BIOS, update of office, ran several optimizers system, etc that does not.

    Now that you mentioned the magnets. I hurt my hand and my mother recommended to put a few small magnets the base of my thumb which should have the effect of acupuncture without needles.

    Now I type with one hand (the one with no magnets) and of course the PC never sleeps in the middle of the sentence.

    Great shot! That's what I call thinking out of the box! I'd never get one. Thank you so much for sharing your insight.

    Cheers from the Brazil

    George

  • When I open the games online I can't get into the game, and they will write check your firewall

    can you please answer

    When I open the games online I can't get into the game, and they will write chek your firewall

    Original title: network programs network networking Internet Web site Site Web Web Site URL

    can you please answer

    When I open the games online I can't get into the game, and they will write chek your firewall

    Hello

    I'm sorry for the inconvenience, but I should be able to help.
    Internet connection issues are widely available and vary from one case to another. Your question, however it seems that the most likely cause is that your computer's firewall prevents your applications to connect to the internet. You can check this easily by:

    1. go to the Start Page of Windows 'default Page of Windows 8.
    2 mouse hover in the top right of the screen then click on the search"" button.
    3. type in 'Control Panel' after a brief search you will see a button at the top of the page left labled 'Control Panel' click on this button and you go in desktop mode and allow you to navigate in the control panel.
    4 from there, click on the tab labeled "system and security."
    5. then, click on the second option in the list titled "Windows Firewall"
    6. the first thing you want to do is to check if you are on a "private" or "Public network" (a private network is usually the safest and although on this type of network, you are less likely to be vulnerable to attacks, Public network are accessible by anyone and give a greater risk).
    7 the right it will say Private Networks Connected / not connected and below that it will say comments or connected/not connected networks public. Most computer security settings differ based on your type of connection, if you are on a network audience of settings on your computer will be more strict and could prevent your programs connected to the internet. (Say if you are connected to a private network, you can probably exclude this.)
    8. If you are connected to a private network and your programs don't always work correctly in the top left of the window under "Control Panel Home" you want to click on the option "allow an app or feature through Windows Firewall."
    9 a list first your "Internet Capable of programs" quickly browse and find that you are having problems with and take note of the checkboxes next to them. If no box is checked, you will want to allow them to connect. Do this by clicking on the "Edit settings" button located in upper right
    10 you want then allow your program through the firewall, this by simply checking the box next to it. (Note that if the Public network that can leave your computer vulnerable or higher risk)
    11 after doing this click ok, now go back and try to run your program and see if the problem is resolved.
    12. If you cannot find your program, click the "Allow" another app... button and navigate to your programs (usually in the folder C: / drive in the folder programs.) and choose your program and adjust the settings to allow through the firewall.
    13 if this does not solve your problem, and the problem persists, try to go into Internet Explorer, by clicking on the gear in the top right and open Internet Options. Go to the Security tab and check how strict your settings are. You should be able to click on "Reset to Default" to solve this problem, if that's the problem. (Located at the right bottom)
    I hope that this helps if not let me know and I'll give you some suggestions.
    Thanks for your time, I hope this has helped.
    -Ian
  • My Lexmark printer stopped working and the error message says "printer cannot communicate with the computer" (from "twisted into the USB pins?).

    When my printer stopped working because of error messages about "printer cannot communicate with the computer" (from "twisted into the USB pins?), I tried to change to 2nd USB port without success. I tried a new cable; that did not help.

    Then I uninstalled and reinstalled my Lexmark printer and changed the error message. Now, the printer does not work because "the USB device is not recognized."

    I tried to update the chips; Use 1 USB port; and using the old cable, all this without success. I checked the connections of the cable to the printer and the PC and turn on the printer and goes off; I'm out of ideas. Any other suggestions?

    Hi ChristineKrause,
     

    Here are some links that might help you:

    Peripheral USB is not recognized when you attach it immediately after that your Windows XP computer comes out of standby or hibernation

    Advanced troubleshooting tips for General USB for Windows XP problems

    Try the steps listed in the items mentioned above and see if that helps you solve the problem.

  • I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors.

    problems with windows install

    I am trying to install flipshare on my computer. I have vista. When I download the program and try it to install it, I get 2 errors. They are as follows...

    "There is a problem with the windows package install." A script required for this install to complete could not be run. Contact your personal support provider or the package. »

    Then when I click OK, this error comes in... "It seems you have an incomplete or corrupt installation. Please use Add/Remove programs to uninstall the previous version. »

    I don't have a previous version of flipshare on the computer, I deleted it and it isn't on the list of programs.

    I have installed all updates.

    I got a support to scan the computer and got a Windows Resource Protection found corrupt files but was unable to solve some of them.

    Does anyone have suggestions as how to do to solve this problem?

    I downloaded Speedy PC Pro in the hope that they could help and he did not. They resumed even remotly and could not understand it :(

    Any help? :(

    Jennifer

    Hi Jennifer,.

    Follow the steps in the article.

    Troubleshoot installing or uninstalling programs

    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  • My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

    My Vista system trying to download the updates, and it does not complete the download. It is up to "Windowsupdate_00000646" and "windowsupdate_dt000" How do I clear this code to receive these updates?

    They are only updated office or all updates?

    For Office updates, usually to pick up the item at the: http://www.microsoft.com/downloads/en/default.aspx

    then manually download and install the same.

    If all updates, perhaps consider the following general tips-

    Option: File of Windows Update agent wups2.dll is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

    Method 1: Save the Windows Update files

    1. Click Start and type notepad in the box start the search.
    2. click on Notepad in the list programs.
    3. copy the following commands, and then paste them into the opened Notepad window:
    REGSVR32 WUPS2. DLL/S
    REGSVR32 STINKS. DLL/S
    REGSVR32 WUAUENG. DLL/S
    REGSVR32 WUAPI. DLL/S
    REGSVR32 WUCLTUX. DLL/S
    REGSVR32 WUWEBV. DLL/S
    REGSVR32 JSCRIPT. DLL/S
    REGSVR32 MSXML3. DLL/S
    4. in Notepad, on the file menu, click Save as.
    5. in the file type list, click all files.
    6. in the file name box, type register.bat.
    7. save the Register.bat file to your desktop.
    8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
    9. try to reinstall updates.

    http://support.Microsoft.com/kb/958053
    See: method 1: save the Windows Update files

    http://support.Microsoft.com/kb/326253
    Method 5: Registry Windows Update engine files

    http://support.Microsoft.com/kb/971058
    How to reset the Windows Update components?

    Method 2: Download and install Windows Update agent

    Windows Update Agent

    How to get the latest version of the Windows Update Agent to help manage updates on a computer
    http://support.Microsoft.com/kb/949104

    Information for network administrators about how to obtain the latest Windows Update Agent
    http://support.Microsoft.com/kb/946928

    Click Start, click run, click Browse, navigate to the file you saved and click Open.

    Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

    Click run.

    Follow the steps to complete the wizard.

    Important

    To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

    Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

    Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

    D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

    TaurArian [MVP] 2005-2010 - Update Services

  • Windows Vista cannot be updated because the service does not work!

    Windows Vista will not update because it says that the service is not running.  He said I might have to restart the computer.

    I tried several reboots the computer.

    I tried to get into the services and manually stop and restart the service.  Nothing seems to work.

    I'm downloading the SP2 for Vista, let's see if that fixes the problem.

    Any help?

    How to reset the Windows Update settings?
    http://support.Microsoft.com/kb/971058

  • Computer goes to sleep and won't wake up

    A few days ago my computer started not to wake sleep cycle.  It goes into hibernation and don't wake up with a jerk of the mouse or by pressing the buttons on the keyboard.  I put the display to sleep for 4 hours and 30 minutes, but she falls asleep before 4 hours are rising and then don't wake up upward.  I have to press the button for a few seconds to do to turn off and then restart.  If I press a button on the screen when the computer is in standby it gives me a message that the signal of the computer has been lost.  Anyone has any ideas how to solve this problem?

    Hello

    Look at all the features associated with sleep and ensure that it is only sleeping and not hibernate.

    Some computers sleep mode will not let you wake up mouse etc. You have to push short s to the power Witch (as mentioned above by WillTel).

    It is possible that your computer never before slept and was just to go off the screen.

    Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

  • I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

    Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

    I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

    Hello

    Thanks for posting in the Microsoft Community.

    If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

    Please answer these questions:

    It shows in system properties?

    To open system properties:

    (a) click Start, right click on computer

    (b) click on properties

    (c) see if it shows Windows Vista with service pack 1 on windows edition.

    Hope the helps of information. We know if you need help. We will be happy to help you.

     

  • (Redirected) Power adapter green light turns off when the laptop battery is plugged into the laptop and does not load.

    Power adapter green light turns off when the laptop battery is plugged into the laptop and will not charge; If the laptop battery is not plugged into the laptop adapter it's still green and will charge the laptop.

    As you have a laptop, better make this laptop in the computer Forum post here:

    http://en.community.Dell.com/support-forums/laptop/default.aspx

    Tip: when you post a message, preferable to always include the computer model.

    Bev.

  • When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    When I do exercise machine of the staircase, the k/cal burned into the machine does not match with the Apple Watch of the activity

    Example of

    Stair machine 550 K/CAL

    Apple Watch 30 k/cal

    Hello

    During a workout on the upstairs computer, record your activity using the app to drive on your watch, choose the stairs like the type of activity no. This allows your watch to use sensors and the data most appropriate to evaluate the results of your activity (including your heart rate, which is measured continuously during the training, when the training app using).

    More information: use of the application of the workout on your Apple Watch - Apple Support

  • how re vista windows install so lost the disk and the nly have export key sticker

    Pleading for help.  I bought a computer laptop esprimo Fujitsu three years ago. It came with the disc of instalastion for windows vista home.  I lost the disk and the pc fell and blamed the hard drive and lost all software including my windows original vista, it wouldn't start. one of my friends took for a guy who fixed and installed its own software for windows 7. Then I found when using its true not his and massage keeps poping up that is not authentic. Cannot get their hands on the guy. I can not even media player inst anythalling and even download updates everytime im online cannot be installed and when I followed the link he encourages me to buy a windows 7 for R702 and I only have the money. I was happy with my windows vista. so I got the info under the laptop computer product key it is to say but sctuffy and the serial number, now how do I reinstall my vista from this fake windows 7 oh please someone help please how can I get my rear my own window.

    See the instructions for the reinstallation of Windows Vista:

    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/repair-man-removed-windows-vista-and-installed/f4ec610a-856b-47a6-9ac2-7d5f07763eb0?msgId=343a6389-3a13-46d1-93fa-342f6a9b8ae1

Maybe you are looking for

  • No sound during video playback

    Recently, I lost my audio when you play any type of video on the Firefox Web site. I've updated all my plug-ins including Adobe Flash, Java and my video card. I don't feel the same problems when you use Internet Explorer. I am running Windows 7 Profe

  • DeskJet HP 2510: Wifi and HP Printer Wizard

    I have the officejet 2510. Can I print using USB and my wifi router. But when I use the HP printer assistant, I can only print/scan with the USB key. HP Printer Wizard does not pick up the printer via wireless connection.

  • Not updated Windows Vista gets stuck

    I've seen several threads on these, but they do not seem to help. I have Vaio laptop with Vista operating system threads. It used to work well until last year.  However, lately when I try to start the computer, it did update Windows and gets stuck on

  • Help with drivers? Please, I beg you!

    Hello I recently had to buy a new hard drive for my Advent 5431. I had a Toshiba MK1652GSX 160 GB and have now bought a Samsung Spinpoint 250 GB. Having bought my computer PC World/The Tech guys it did not come with an installation CD, so I bought on

  • Start developing for OS 6

    Hello I'll develop an application on the Bold 9700 OS 6. I installed Eclipse with BB SDK 7 then installed BB 6 SDK. Also I got my keys for the signature. He said "Signed" on the Signature tool, but on Eclipse (in the code editor), it is said "PhoneLi