HP w2207h monitor: HP monitor crashes if connected to the Mac Mini

My w2207h monitor works fine connected to 2 computers. A Dell laptop connected with a cable HDMI and a Fujitsu PC connected with VGA cable. I spend between the 2 with the menu key of monitors and the function 'change the video input '. However, I just buy a Mac Mini and connected via HDMI but now, pass the VGA to HDMI causes the monitor to crash/power down. Even the light around the power button goes off and nothing works. To relight the monior screen, the only way is to disconnect the cable from power for a few minutes. The monitor works with an another old laptop connected via HDMI as doeas the Mac Mini connected to an old television set. I thought HDMI HDMI was, but this monior dislikes my Mac. Any ideas?

Thanks for the information Dunidar. A long session, running tests with Apple confirmed that this monitor does not work with Mac Mini. The only solution was to buy a new monitor :-(

Tags: HP Desktops

Similar Questions

  • Drive external hard (connected to the Mac mini USB) disconnect during use

    I have a 3 TB (WD green) hard drive in an external hard drive enclosure "miniStack MAX Media", connected to my Late 2012 Mac mini via USB.

    I don't know when he started to do this, but I recently noticed that it was dismantling even when she was in use; the error was:

    Disc eject does not correctly
    EJECT 3 ' TB' before you unplug or turn off.

    I replaced the USB cable and saw the same mistakes.

    I moved the HARD drive to a different box. same mistakes.

    I swapped the HARD drive to a whole new WD 4TB blue; same mistakes.

    So now I have a new drive in a new case with a new cable, and I see the same messages "Disk not ejected correctly".

    (By the way the disk utility has shown that the two discs were fine when I ran first aid.)

    This brings me to assume that the problem is with my Mac mini, which runs at El Capitan and is fully aware of the updates of the operating system.

    Recommendations on next steps to investigate and resolve this problem?

    It seems that your external draws too much power. That shows the report of your system? You have an external power supply for external drive? Have you tried to use all the USB ports on your Mac?

  • HH.exe crashes - lost connection to the online help and Support window

    HH.exe crashes - lost connection to the online help and Support window

    SYSTEMATICALLY, FOR MONTHS, WHEN I SEARCH WINDOWS HELP I got THE MESSAGE.

    "You have lost your connection using Windows and Support website. . Try to connect again. "
     

    Windows Error Reporting shows several times:

    1. HH.exe hangs and does communicate with Windows
    2. MsSearch TerminateProcess & #x000d
    3. ApphelpSoftBlock & x000d #.

    I have no problem connecting to Windows Web sites otherwise or to other sites on the web.

    Can someone tell me how to fix this?

    (I'm running VISTA 32 bit)

    Hello

     
    This behavior is caused by a corrupted or damaged HH. DAT file.

    This may occur if Antivirus or a firewall, you have installed the program it blocks.
    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks
  • Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

    Hi all

    Can I connect my MacBook Air to my Mac Mini so that I can use the display of the Mac Mini?

    The Mac Mini is the end of 2014 with 2 ports thunderbolt model and is connected to a mini display port monitor.

    I'm just fed up of having to pull on the cable of the Mac Mini to connect the MacBook Air.

    Any ideas? Suggestions?

    Thanks in advance!

    Using the built-in screen sharing are an application like:

    ScreenRecycler

    Only some iMacs support the target Display Mode

    Use your iMac as a display with the target - Apple Support Display Mode

  • I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update

    I have the macbook pro (OS 10.6.8) and the iphone 6 s. The latest version of iTunes is 11.4. When it is connected to the MAC, I get the message that itunes must be upgraded. How to synchronize or import/export files(images/music)?  Fact is need to update itunes?

    Hi sonalnj,

    I understand that you cannot synchronize your iPhone as iTunes is requested it must be updated. I can help you with that.

    According to the technical specifications for a 6 s iPhone, you need a Mac running OS X v10.8.5 or later version with iTunes 12.3 or later. Because you are on OS X 10.6.8 your version of iTunes is up to date with this OS.

    iPhone 6 s Tech Specs
    http://www.Apple.com/iPhone-6s/specs/

    Now to fix that, you need to update your Mac OS X 10.8.5 Mountain Lion or OS X 10.11 El Capitan. If you want to go to the Mountain Lion, you can do it with the first link below. The cost will be $19.99 and a code will be delivered to you if you can download it via the Mac App Store. Once you have upgraded, be sure to make all software updates to go with him to get the latest version of iTunes.

    OS X Lion mountain
    http://www.Apple.com/shop/product/D6377Z/A/OS-x-mountain-lion

    Now the other option is to move to OS X 10.11 El Capitan, and is a free update that you can do right in the Mac App Store, if you meet the system requirements. Take a look at the following article for more details on how to do it.

    Update of OS X El Capitan
    https://support.Apple.com/en-us/HT201475

    Nice day!

  • EPC2203 modem cannot connect to the Mac via USB?

    I searched all threads and you can't find something to solve my problem.

    My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?

    Any help is very appreciated.

    To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.

  • Unable to connect with the Mac computer?

    Unable to connect with the Mac computer?

    Please read https://forums.adobe.com/thread/1499014

    -try some steps such as changing browsers and disable your firewall

    -also clear the cache of your browser if you start with a fresh browser

    -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

    https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

    http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  • Fixation of two monitors to the Mac Mini

    I am eager to attach two monitors to the MacMini in 2015. I have a LG one on my Air already, but I would like to use a different one (Asus) as well on the MacMini.

    Yu have the 2014 end Mac Mini, it's the last. This mini supports:

    Video support

    Support for up to two displays at 2560 x 1600 pixels, both at millions of colors

    Digital video output Thunderbolt
    • Native of output Mini DisplayPort
    • DVI output Mini DisplayPort to DVI (sold separately)
    • Output VGA Mini DisplayPort to VGA (sold separately)
    • Dual-link DVI output Mini DisplayPort to DVI dual link (sold separately)
    HDMI video output
    • Support for the resolution of 1080 p at 60 Hz
    • Support for the resolution of 3840 by 2160 to 30 Hz
    • Support for the resolution 4096 by 2160 at 24 Hz

    Exit DVI HDMI to DVI (sold separately)

  • Outlook express crashes when connecting with the mail server

    Outlook express 6 crashes when the connection with the mail server, please advise, thank you!

    Try to remove your e-mail account and then close and reopen OE and then add it back again.  Make sure that antivirus sofware interfering not - see www.oehelp.com/OETips.aspx#3

    Steve

  • sqlplus crashes when connecting to the database after you apply the hotfix 10.2.0.4

    Hi, I applied the Group of hotfixes 10.2.0.4 and CPU January 2010 on my 10g database. my server is a windows 2003 x 64 with user specific (oradb)
    When I tried to connect to the database, it took 15 minutes for a normal user to open a session and each request is almost as long.
    If I connect as SYSDBA, everything seems fine.

    I don't see anything relevant in the alert_log or listener.log

    The only thing I see is the view v$ session_wait unusual. It seems that there are 26 to 28 the processes that are associated with the timeout, the database status I in runs of laboratory with 11-16 processes.

    Can someone tell me what I can look at?

    Thank you

    If your database is 24 * 7 first thing you creates an appropriate with gravity SR.

    In the meantime, you can create a database logon trigger to enable tracing for each session for this user before logging.let the logged-on user and then read the trace file to see what gets you.

  • Problem connecting to the Mac newbie

    Hi, I had some problems with malware after that (stupidly), I tried to download a software to capture audio online. I started getting pop ups on a so used a malware scanner to delete these (I've used it before and it worked fine). I restarted the mac but when connecting the profile appeared my keyboard would not type in my password for user profile box. I managed a login in safe mode and could log on as user guest (no password) but not on my usual profile. Any advice would be much appreciated.

    ... used a malware scanner to delete these

    In general, it is misguided. What safeguards do you have?

    Your user account does not appear as an option for connection?

  • Can no longer connect to the Mac App Store

    Since I upgraded to El Capitan on my iMac for mid-2011. All I get is "cannot connect to the App Store". Check the App Store Control Panel in system preferences, but does not mention of the connection parameters. Worked well before El Capitan

    Well, today I was able to connect to the MAS without problem. Maybe it wasn't CBS installation but may the MAS is declining. Weird. Question is now moot.

  • Connection of the old Mac Iomega Zip to the Mac Mini

    I couldn't find an answer to this common question I could map to a solution to my problem, so:

    I have an old Iomega 250 MB Zip disk that I used on a Mac of pre-iMac. It is a parallel port connection. I'm trying to use it on a Mac mini running El Capitan. I am trying to connect a parallel cable mini / USB. I am recovering some important files from this bygone era. I have the Mac Ziptools drive.

    I don't know if it's to see the player: he seems afflicted to a connected player ID, but can't open it nor report any info on this.

    So, in fact do this as shown? If this is not the case, how can I do this? Thank you.

    I do not know its being a common question. At least not in this decade.   My G4 has a Zip drive, but it dates back to 2002.

    I don't remember if the readers required Zip one driver special for which I suspect 99.999% there is no version of El Capitan.  He could have that included in the operating system returns with OS9, but because people have stopped using Zip disks long ago should not appear in a newer operating system.

  • OK so I connected my iPhone 5 s for my Macbook Pro with a USB cable, but the system settings it is NOT CONNECTED, even if it triggers iTunes to open. Do not get internet connection on the MAC how come the system settings shows USB not connected

    I connected my iPhone to my Mac using a USB cable, but the Mac connected USB not appear, even if iTunes opens

    The Mac has no network to the internet via a port USB, WHY NOT?

    Where in the Panel are you looking for? And what you're trying to do with the phone? Transfer files? Share an internet connection?

  • Satellite C660 2QH WLAN problem--loss of connection all the ~ 30 min

    Hello world

    I just bought a SAT C660 nine Toshiba and I faced a strange problem - I lose the internet connection every 30 minutes for about 3-5 minutes, then it connects all of a sudden again.

    I've been reading about the problem here and I fixed my power settings (although this also occurs when the laptop is plugged in), and I installed the new WLAN driver: 1005.19.0420.2011 (my Wireless LAN Adapter is: 8188CE). I thought that he that could have the problem in my anti-virus program, so I uninstalled. A few restarts later everything was as before - problem persists.

    Help, please!

    PS. I'm from Germany, where this is relevant.

    Hello

    Are you sure this isn't question of Wlan router?
    It would be interesting to know if you have the same problems with other devices connected to the Wlan.

    Next to the idea that this could be a router issue I think you should check some WLan Card settings.
    In the Wlan card-> properties-> tab Device Manager to disable the option to turn off the device to save power.

    You said that you have installed/updated test driver the driver from Realtek page too.

Maybe you are looking for

  • Flash player does not load

    I use Firefox on a Mac 27. Having had various problems that now seem to be resolved (sorry rmcguigan and computerwhiz but I can't find the place for the answer, I ended up sending a message to myself) it seems that the cause of this was the Notrace a

  • How can I determine the version of Toshiba Assist?

    How can I determine the version of attribution that is installed on my Satellite X 200 with Windows Vista Premium SP 1AA. Operating system?

  • The thickness of particle detection and eradication of these particles with thickniss less than a given value

    In my project after comparison of model or get I the image with defects. I defects (particles) are relevant with a thickness greater than a given value. I have tried a few methods, particle analysis, read a few articles in this forum... But I can't f

  • HP Officejet 4622 scanning preferences

    Hi all I was wondering if anyone had a good understanding on how to change the settings for scanning on my 4622?  I'm looking for a resolution higher than the default value. Thank you!

  • Sansa Express: FM Radio Tuner

    Hello I bought 2 Sansa Express 2 GB MP3 players.  I can't find the voice recorder Radio to a player, only music, FM tuner and parameters. Could someone help me please? Kind regards