HP wireless all-in-one B110 a: printer will not print or copy, page setting even not

Similar Questions

• HP wireless e-all-in-one B110: HP printer does not not despite all new inks and following the instructions any catch-up

  I followed all the advice given but nothing helped, including the one given on the printer itself, but I just cannot print from my Mac.  Scanning directly from the printer is good, but not from the computer. This problem started only today.

  More than 80 and can not think what else to do! Please can you help me? Thank you.

  Hi Sirodyam ,

  If the printer was working with the previous black cartridge, I think it's a problem with the black cartridge and it will need to be replaced, but I've provided a few steps more, you can try first. Check the date on the cartridge to make sure it is in warranty you have purchased. May be the oldest stock of cartridge.

  If you had the issue before replacing the black cartridge, you could clean the contacts on the cartridge and the vent. Also, make sure the tab on the cartridge. ' Incident affecting an ink cartridge: following print cartridges appear to be missing or corrupt "views for HP Photosmart more e-all-in-one printer series (B210). " Do not take into account the title.

  Here is a document to manually clean the print head. "Incompatible print head," 'Printhead missing or damaged,' or 'Print head problem' displays for HP Photosmart Wireless e-All-in-One Printer Series (B110). Do not take into account the title.

  I hope this helps.

  If you are still not able to print in black, call our technical support at the 800-474-6836 and inquire about a replacement cartridge please. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

• ALL-IN-ONE PHOTOSMART HP 5510 WILL NOT PRINT AFTER GO 'SLEEP' MODE

  My printer model:

  HP PHOTOSMART ALL-IN-ONE 5510 B111A

  Problem:

  Printer goes into sleep mode. After 25-30 minutes breaks the connection between the PC and the printer wireless. Beacon wireless is the same fashionable "sleep" and I see that the printer is connected to my router and there is internet connection. HP Print and Scan doctor sees the printer, but I can't wake the printer unless I restart it.

  What I've tried so far:

  I tried all the solutions offered hp.com; Reinstall driver, updating the printer software, setting static IP on the printer, static DNS servers, using HP print and Scan doctor.

  I've seen people questioned on this issue before and there is no solution. I really need help from HP!

  After days of research, the problem was finally solved! I applied the following steps below. Some steps may be unnecessary, I didn't waste my time knowing who.

  1. find your PC's DNS servers by typing ipconfig/all in CMD.
  2. assign a static IP address outside your DHCP range. For my Linksys router him between 192.168.1.100 to 192.168.1.150. So I put my static IP address as 192.168.1.20.

  To do this, click the button on your printer wireless. This will show the IP address of your printer. This type of your browser. Go/network/network address. Choose manual IP and write 192.168.1.20

  3 now come to section of the manual DNS server, and then type your DNS servers, you found before.

  4. open your HP printer program that must be installed with your driver. Utilities hit and update the IP address. Update your address with your static IP address.

  5. now go to your router settings. Find the wireless settings and change your not automatic standard 20 MHz radio band.

  6. change your standard channel to 6.

  7 find the wireless security and replace your WPA-personal security mode.

  8 disable UPnP

  9. This is the part of the KEY. Change the renewal of your key to 36000 seconds. (10 hours)

  10 go to the Windows Advanced Firewall. Enable all the disabled printer and share, entrants and outbond rules.
  I believe that the most important parts are affecting a static IP address outside your DHCP-range and change the key renewal time. I hope this works for you too

• HP Deskjet all-in-one: HP Deskjet 3520 will not print black, period

  OK, I've lost my WHOLE day, searched forums, has done what others have tried, poste posted HP Facebook, doing whatever is humanly possible to get my printer to print in black. I ran the clean printhead, black ink changed TWICE new cartridges, reloaded drivers, reset the default open to the top of the printer and tried to manually clean the head after only 4 hours to do everything I can possibly do to get this junk to print in black. The printer is only a year old and the cartridges are freshly bought from the store. So, tell me what am I missing or is the printer ready to be stoned?

  Hi @ChrisBird,

  Welcome to the HP Forums

  Looks like you've covered most of the steps, but I will propose always to have a look through this document printer prints blank Page or not printing black or color ink for HP Deskjet Ink Advantage and Deskjet 3520 e-all-in-one printer series to ensure that you have verified that the event on both cartridges.

  If this does not help still nothing and will not always be the black print, please call our technical support team and request a replacement printer. At THAT TIME, regardless of the warranty, they should be able to establish that the replacement for you. Otherwise, let me know and I'll do my best to help you with a resolution.

  The pleasure of you talk to soon!

• Printer HP Deskjet 3070 all-in-One - the IP address will not save

  Hello

  When I connect my printer to all-in-one HP Deskjet 3070 - B611a and try and update the IP address manually, it says it is in place and I press ok but nothing happen need me just indented on the same page but with the address IP is entered.

  The same things happen when I try the wizard he fines the Wifi network and accepts the wifi key tells me im change network, but then after that just takes me back to the first page of the wizard as nothing has happened.

  Almost as if it won't save or flash memory.

  Please help someone.

  Thank you

  Bryan

  Hello Odbod22

  By turning the printer power switch will usually change the IP address, unless make you it static or unchangable. The reason for routers use a protocol called DHCP that tells it how to distribute IP addresses. So, it is not uncommon that address to change. To avoid this, you must assign a static IP address on the printer.

  To do so follow the link below and search for "Step 6" how to set a static IP address.

  Printer keeps no connection Wi - Fi

• L7580: HP All In One L7580 - Scans but will not print or copy

  Last problem with the L7580: this machine will scan but not print or copy.  All four color cartridges are good, remaining.  He machine is not used as often as it should be, but copied and printed a few weeks ago.  Any suggestions?  Thanks for any help.

  Hi @kkpb,

  Welcome to the Forums of HP Support!

• OfficeJet Pro 6978 all-in-one: OfficeJet Pro 6978 / will not download drivers

  I just bought this printer Office Jet Pro 6978, All In One Printer.  It won't let me download the driver listed in the steps to implement, it fails every time.  I tried to use the CD that came with it, it gave me a message "this computer's operating system is not supported."   So this printer will not work on my 64-bit?  Or elsewhere?  My computer is a HP.  Where can I find a download driver for this printer for my operating system?  When it prints, it prints a nonsense.  % beginprolog % beginresource: file and so on with such things.  I am at a loss... Any help would be great.

  Hello

  Sorry, but the printer is not supported on Windows Vista 64-bit.

  64-bit support is only available in Windows 7 or later operating systems.

  You can find the printer specs below:

  Vista 64-bit is not supported.

  http://support.HP.com/us-en/product/HP-OfficeJet-Pro-6970-all-in-one-printer-series/8289585/model/11161264/document/c05061732/

  You must upgrade your operating system to a later version to use instead an OS 64 - bit, Windows Vista 32 - bit to insall or replace it with another printer, compatible with your operating system.

  Respect,

  Shlomi

• HP Officejet 6700 premium all-in-one. The documents will not power automatic document feeder fax.

  I can send a fax from the glass, but when I try to fax multiple pages in auto document feeder it doesn't recognize, they are there and asks me if I want to fax the glass or ADF.  I click on ADF and says original place in the ADF, and press start.  I opened the compartment in front of the ADF and it is not stuck or dirty.  Help, please.

  Hi DLreportin,

  Thanks for the reply!

  In the software you wish to select Connect new printer. Not really sure why you were running the software again if I don't believe it was part of one of my suggestions.

  If I understand well after the steps of my above after you are still unable to make a copy through the ADF?

  Did you update the firmware, or connect the printer to the wall makes no difference?

  Please let me know it's going, and if you are still unable to copy after checking these two things and then I will consider a deeper reset for you.

• software and star driver hp psc 1315xi all-in-One extracts full but will not load on xp sp3

  Can not find a way to get this to install. After extracting I finally found it in running %Temp%. Searching through all files and folders, trying to find the exe file. to get it to autorun, but was unsuccessful. I tried to install this on 2 different PC with xp pro sp3 but no luck.

  The solution below is from michael323 here in the Forums of HP's Support.  Make sure that you send Bravo!

  I think I have solved this problem.

  I have a PC Windows XP Pro (SP3) who has been affected by this problem.

  Immediately after that the window of 'extraction' went to 100% and closed, nothing happened.  The windows install/never display software.

  Whenever I tried it creates a log file that started with this:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  # GetValueByLang (f-> c_str(), _T (Version), _T (LanguagesInthisCD) failed "

  System LangID = 1033.  mapped to ENU

  # The system language is ENU, but is not on our CD!

  There was other error messages after that, but they all come from lines 3 and 5.

  Something she prevented the installation program to recognize the language ENU files ARE present in this download.

  Comparing two PCs, a problem, and one that works perfectly, I saw that one who was not was AutoRun disabled through a registry setting.  I temporarily deleted this registry on the PC that wasn't and Setup launched and ran like he was supposed to.  Here are the first of this log from the same PC, a few minutes later, where the only difference was that I had removed the registry setting criminalized:

  "Parsed command line: «.\Setup.exe".

  Using datfile: C:\DOCUME~1\xxxxx\LOCALS~1\Temp\7zS1293\autorun.inf

  System LangID = 1033.  mapped to ENU

  We use the system of language = FRA, which is located on our CD!

  As you can see, the message "(LanguagesInthisCD) failed" (line 3) disappeared, and the line 5 (now line 4) shows that it has to recognize that the language ENU installation files are present.

  So if you encounter this problem, and you are comfortable with the system registry, here is how I got it to work on my PC:

  Start regedit
  Navigate to the bottom of this tree
  -HKEY_LOCAL_MACHINE
  -SOFTWARE
  -Microsoft
  -Windows NT
  -CurrentVersion
  -IniFileMapping
  Below, find out if there is a key named "Autorun.inf".
  On my PC (the one with this problem) the value of this key has been "@SYS: nexistepas".
  If your registry database also has this, it may be the cause of your problem.
  In the left pane of regedit, do a right click on Autorun.inf and select "Rename" from the context menu.
  Change the name to something like "Autorun.inf.hold".
  Close regedit
  At this point, I restarted my PC, but I don't know if it is really necessary.
  I ran the downloaded driver file.  It extracted, and the Installer started out as it was supposed to.

  When it was done, I returned in regedit and renamed "Autorun.inf.hold" to "Autorun.inf".

  It is extremely frustrating for me, and (if you need it), I hope that this solution works for you.

• HP PSC 2355 all-in-one: HP PSC 2355 will not recognize Windows Vista Home Basic

  I bought this product in 2005. I'm just out of the box yesterday. The printer works fine. The software CD was made before Windows Vista Home Basic Edition. He acknowledges only 98, Me, 2000 and XP. He calls a Unknown600 to Vista. Is there a driver or other update I can use? Thank you.

  Hi @Mc_Cool,

  Welcome to the HP Forums!

  I noticed that you are looking for a basic Windows Vista Home Edition driver for your HP PSC 2355. I'm happy to help you!

  You can download the driver directly using this link, HP full feature software and drivers.

  Hope this is what you are looking for and have a great day!

  "Please click the Thumbs up icon below to thank me for having responded."

• Series HP Photosmart Wireless e-All-in-One B110. I can't install the driver and software

  Hello

  I formatted my computer and reinstall windows 7 64 bit, I reinstalled many software (windows office and so on...), but I can't not reinstalled driver software for my printer Hp Photosmart Wireless e-All-in-One B110 series. When I insert the original cd of HP at the start of the installation but after 1 minute is displayed error

  

  I downloaded the dirver software from HP Web site, I tried to install it, but pops up the same error

  What can I do?

  Thank you

  Hi banzafa,

  I see that you get a runtime error when trying to install your software, and you have recently reinstalled WIndows 7 64 on your PC. Please follow the steps below and let me know the result;

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. Download the software and choose Save as, save to desktop > PS_AIO_07_B110_USW_Full_Win_enu_140_126.exe
  4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. Open the folder Util
     
  7. The CCC folder
  8. If you have a computer HP run the L3uninstall.exe. If you have an non HP computer run the L4uninstall.exe
  9. Once the uninstall is complete, reboot the computer
  10. Follow these steps to reset the registry settings and options for Windows Installer.

• Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

  Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

  I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

  Hello
   
  What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP
   

  Please answer the question above so that we can better guide you.

  For now, you can read the following article.
   

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  Check if it helps.

• My HPOfficejet j4680 wireless all-in-one printer error message says its offline

  I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

  Yet, I just continues to be my what. Any suggestions? Thx John.

  Hello JohnGeiser,

  Take a look at following print references:

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
   
  Let us know if that helps.
   
  Best regards
  Matthew_Ha

• OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

  Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

  Hello dhe8011,

  Welcome to the HP Forums!

  I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

  Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

  Let me know if this document solved your problem or not.

  Impatience on your part.

• HP Officejet 4600 all-in-one: unable to print on my HP 4600 wireless all-in-one

  I have a HP Pavilion computer G7 with windows 7 64 bit operating system and A HP Officejet wireless All In One printer 4600 and my printer shows it's online but says print window is not and I can't print. What can I do to fix this?

  I suggest that connect you with a USB cable then.