HP Wireless Laser Mini Mouse black - how to start or STOP?

I recently installed a HP mini laser wireless (model MORFB1UO) and not where they say nothing on it turn on and off.  My concern is that I will wear the battery quickly if I do not turn off it when I'm not using it.

An email to support HP resulting in the following statements:

"Click Start."

O and click on run

O type devmgmt.msc in the box run

O and press ENTER.

O make a right click on the mouse and other pointing devices and select Disable.

Follow the same steps to enable. »

This seems like a lot to go through every time you put a computer on or off. There must be an easier way to prevent battery discharge when not in service. I couldn't remove the battery, but this seems clumsy and a little silly.

Any suggestions?   Thank you very much.

I'm having some problems with out my messages.  Here once again...

I have rec'd no definitive answers, but an e-mail from HP said that it is not attracting a lot of power when not in use; Therefore, I just let the mouse on.   It has been 7 days and it is still ongoing.

The USB connection seems to be fragile because it sticks out so far.  It could easily be interrupted, but I leave hip except when moving the computer.

I have no problems with tracking or lose contact with the computer.  I am running Vista.

Tags: Notebooks

Similar Questions

  • I have a wireless laser 5000 mouse and laser light does not. New batteries and nothing.

    My wireless laser 5000 mouse used to have a light on the background. It is no more. What I have to buy a new, or is there something I can do to remedy this? Thank you

    Hello

    1. are you able to use the mouse laser wireless desktop or not?
    2. have you checked the mouse on another computer?
     
    Check if the device works on different computers. If the device does not work, contact the Microsoft order in the (800) 360-7561 to get a replacement. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:
    http://www.Microsoft.com/worldwide/
    See Help links:
    It will be useful.
  • Replacement receiver wireless laser 6000 mouse for

    Hi, I lost my receiver wireless laser mouse 6000.  Can I buy just the receiver at MS or even a universal one work anyway?  also, I can't find the installation cd.  I think I can get the site Ms.

    Hey, I just lost an hour of my life speaking to Indians in their call center and still don't know how I can order a replacement dongle.

    Next time I'll go with Logitech - at least they offer better support on the hardware side!

    Try to call Microsoft's orders to the (800) 360-7561 service to get a replacement. They were very helpful when I was looking for a replacement receiver for my wireless arc mouse.

  • Keyboard and mouse either fail to start or stops working after a while.

    Original title: keyboard and mouse problem

    My keyboard and mouse either do not work at startup, stop working after awhile, sometimes after a few hours or sometimers causing me to push the button Reset to get out every 10 minutes is on the line of support from microsoft for two hours, cost me £65, but still not fixed

    Pentium I5 dual core 2 x 500 GB disks 5700 chart logitec gaming mouse and keyboard

    Hello

    Thanks for those tips, I've considered that everything that had happened in the last weeks and remembered that my mouse was the first to show signs of problems when the red light on the bottom went dark and brilliant then a few times.

    I swapped the front mouse with a type Wireless and it seems not however solve the problem since replacing it with a different mouse to lead the problem disappeared. In my view, that the old mouse has a hardware problem that shorted supplies USB causing both mouse and keyboard stop working.

    allowed for a few days, so I guess that was the problem.

    Thank you for your support

    Chris

  • How to start and stop the APEX?

    Hi all! I am new to this forum and APEX too...

    We are runing (Version: Application Express 4.1.1.00.23)

    I need to reboot the server.

    How can I stop APEX graciously and start back after? Thank you!

    Kind regards

    Ghyslain salvation,

    to reinforce what Mike says. Apex is a database and, with the exception of the HTTP server application, runs entirely on the database. (Note with EPG, its all in the database) It contained in the users/schemas database and built items of data such as tables and PL/SQL packages. If the server that is running the Oracle database in which the Apex is installed needs to be restarted, the database must be stopped, which stops indeed Apex. If the HTTP server is also running on this server (ESS or earpiece of the Apex) then this should be stop as well.

    Of course, if your desire is not to stop the database, but to deny the user access to the Apex, perhaps for purposes of maintenance of database, then this can be done by stopping the HTTP server or by stopping the EPG.

    I hope it is clear now.

    André

  • How to start and stop two parallel loops?

    Hello

    I want to control two parallel loops with different timing in a vi. Second, it means that to start the loop 1, roll 2, stop 1 or 2 restart loop 1...

    But if loop 1 turns that I can't start looping two then reverse.

    Can someone help me and show what is bad in my example?

    Thank you

    Christian

    Hello Christian,.

    The reason why you can't do what you want is actually quite simple.

    You have an external loop which is 'on' the two inner loops.

    So when you stop one of the inner loops, the outer loop will still be in the same iteration until the other inner loop ends - stop the other inner loop.

    You can see very easily if you explore the outer loop iteration count - only when both loops internal, it is incerment.

    So, to do what you want, you need to make them independent - you need two external loops.

    Check my attachtment, see if that's what you need.

    Hope this helps,

    Paulo

  • How to start and stop the video capture in a state machine

    Hello

    I am a student of neuroscience and this is what I try to do: 1) trigger a camera to GigE (200 FPS), 2) start the video capture, 3) triggers a light that stays on for x milliseconds, 4) trigger a valve that will blow an air puff, 5) stop the tone and the valve at the same time and 5) stop the video capture 1 second after 4). For this, my VI is a state machine, with a State for each trigger (ex, 1 State for trigger camera 1 State of light of trigger, ect) and a statement to "stop" and a "time-out State." Everything worked except the video acquisition - the program could trigger the camera but only acquire a frame, because it was not running in a while loop and this is my first question: for an acquisition video is it always necessary to have a while loop?
    I guess the answer is Yes, so I built a loop of 'consumer' for the camera. A queue of the pre-trial 'trigger camera' in the loop of producer, I was then able to start the video capture, but now the problem is to stop it at the right time. I have an another queue in the State of 'stop' in the loop of the producer, but is not able to start the State 'stop' in the loop of consumer, I think that maybe it's because the loop of consumer gets "stuck" in the whole loop.

    I hope you can help me, the VI is attached. Thank you!

    Hello

    First of all, in your loop producer: STATE 'Stop', you use the flushing line, then there is no need to use 'item queue at the opposite end. You can use the enqueue function.

    Secondly, you said "I moved the command stop inside the while loop as you said, but it did not work. But if you look closely, you moved "Enqueue function" inside the while loop. Instead you should use Dequeue function. Please, look at the picture I posted an orderly manner.

    And remove the circled (i.e. function. Enqueue function loop of consumption, where I wrote 'Why stop here').

    Try now.

  • How to start and stop a task with c#?

    Guys,

    I need a help. I'm trying to reproduce a task created using Meansument & Automation Explorer. The task is very simple create a channel of digital output and send the values 0 or 1 to enable and disable a relay in my board DAQmx.

    Kind regards

    Alexander has.

    I found the solution, add a new item in solution using Add new item choose component or and together the configurations such as a task type that you need. The issue will create a class for your task, this class has all the events to start and stop a task, and you can add your new methods if necessary.

    Thank you all.

    Alexandre Albuquerque

  • How to start and stop the timer by using the keyboard.

    Hello, I would really like to help please, I have

    here to launch a program whereby I press a key

    which starts the timer and press another button to stop the timer, the

    delay is displayed and used to move an object on the phase on the delay dependant.

    Thank you

    Attach a listener of events on the stage of your film.

    stage... addEventListener (KeyboardEvent.KEY_DOWN, keyDownHandler);

    According to the http://livedocs.adobe.com/flash/9.0/ActionScriptLangRefV3/flash/events/KeyboardEvent.html# KEY_DOWN

    1 if you want any key, so you don't need a key code.

    var myKeyBoolean = false;

    function keyDownHandler(event:KeyboardEvent) {}

    if(myKeyBoolean == false) {}

    start my Countdown

    } else {}

    Cancel and reset my timer

    }

    }

    2. If you want the same key to both use a Boolean value like this:

    var myKeyBoolean = false;

    function keyDownHandler(event:KeyboardEvent) {}

    if(Event.keycode == MyKey) {}

    if(myKeyBoolean == false) {}

    start my Countdown

    } else {}

    Cancel and reset my timer

    }

    }

    }

    3. If you want two different keys

    function keyDownHandler(event:KeyboardEvent) {}

    if(Event.keycode == myStartKey) {}

    start my Countdown

    } Else if (event.keyCode == myStopKey) {}

    Cancel and reset my timer

    }

    }

    }

  • Win7 64 bit wireless keyboard and mouse problems

    I am a technician and has decided to declare this, since I've seen several complaints the same issue on the same forums.

    Its a win7 64 bit ultima. the keyboard and the mouse is natural egronomic wireless keyboard and mouse 7000.

    Started having problems about 2 weeks ago

    I've uninstalled and reinstalled the software intellipoint and intellitype.

    Changed the batteries twice.

    resynced several times

    no damage or anything spilt arrived at the keyboard

    a usb cable keyboard and mouse works fine.

    the keyboard and the mouse works fine on another computer with Windows XP. matter of fact, I type this message with the keyboard in question. I think that maybe a released hotfix is giving problems with a keyboard and wireless mouse. Please report it to anyone who is able to check that

    Thank you

    He has been sending codes of keys repeated to the OS or does not at all. but never mind after a day of work, the keyboard and the mouse on another computer with Windows XP 32-bit, he just started doing the same thing. It takes time for it to happen so it looks like a hardware keyboard problem. already reports to microsoft to see if I can RMA if under warranty.

  • How to start Oracle Application Services?

    Hi all

    I am using the RDBMS: 9.2.0.6.0; Oracle Applications: 11.5.10.2 on AIX.

    I am new to Apps and what to know how to start and stop the Application and database services.

    Thank you

    Hi you

    Please follow the following steps:

    Log in as a user in database

    CD $ORACLE_HOME/appsutil/scripts /.

    *./addbctl.sh start * _ This will launch your database

    *./addlnctl.sh start * _ This will start your listener services

    Log in as user apps

    CD $APPLCSF/scripts /.

    *./adstrtal.sh apps /* This will start your application services. _

    Thank you
    Anchorage

  • Microsoft Wireless Laser Mouse 5000' now works' back (vertical) - how can I fix it?

    I had the same Microsoft Wireless Laser Mouse 5000 for a few years (using Vista) and all of a sudden today, it is backwards (vertical) - can I use it, but it's clumsy - suggestions - I tried to restart, disconnection, battery change, etc..

    I turned the mouse around - but the horizontal then runs in the background! Any ideas out there?  Thank you...

    Ideas:

    You have problems with programs
    Error messages
    Recent changes to your computer
    What you have already tried to solve the problem

    Hi teach007,

    1. did you of recent changes on the computer?

    2 when was the last time it was working fine?

    See the Microsoft articles below and try the steps mentioned them, check if it works.

    Troubleshoot a wireless mouse that does not correctly

    http://support.Microsoft.com/kb/321122

    Troubleshoot the incidents of the response to the mouse or wireless keyboard

    http://support.Microsoft.com/kb/838398

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

    I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

    Most often when a device does not work, it's because the driver has been corrupted.

    Try reinstalling your.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

    http://captaindbg.com/how-to-update-drivers-on-Windows-7/

  • Microsoft wireless laser mouse 8000__

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

    Hello

    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

    battery empty? or not connected? DoD you have intellipoint 7?

    have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]

  • Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

    I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

    * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

    * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

    Event type: WARNING
    Event source: USER32
    Event category: no
    Event ID: 1073
    Date: 02/07/2009
    Time: 10:53:03
    User: NT AUTHORITY\SYSTEM
    Computer: PC
    Description:
    The attempt to shut down the PC

    For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
    Data:
    0000: 00 00 00 00...

    * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

    If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

    I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

    -Andy

    Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

    Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

    Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
    No drivers on PC World UK (seller) or Sysgration site or the other.

    Author of the driver (info email the driver DLL) contacted but no response until now.
    SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
    In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

    Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

    Colleagues, it takes up to a new driver appears!

Maybe you are looking for