HP xw4600 workstation: 6 beeps and no display

Similar Questions

• HP compaq: what system is switch it (poweron) long beep and display just after the hour

  Hello Sir

  When the system is switch it (poweron) long beep and the display is coming after the hour

  Hello Mr. dunidar,

  This is gopi anand, support fund, tirupathi, India

  Thanks for your answer, you asked me to send a system model number, final, I found keyboard.replaced the new keyboard and monitor problem now it works fine.

  the hp is the brand if there is an error beep sound.any way thanks for your reply will be given

• HP Pavilion 500-054: HP Pavilion 500 6 beeps cannot no display

  I have a HP Pavilion 500. I recently went to my BIOS screen and the BIOS did update then my computer shut down. Now every time I turn on my computer, I get 6 beeps and no display. The light stays on and I can hear my fans running, but that's all.

  I didn't change anything in the BIOS before or during this time, I went alone to the screen automatically updated. I have a graphics card in my PC which came with the computer, but this is not a new installation, and has been since I bought (2 years ago.)

  You are not sure if the material breaks and it's a coincidence, or if the BIOS update has messed up my computer?

  Thanks for any help.

  Hello:

  In addition to what Erico posted, you had previously installed a video card no HP, correct?

  Because the product for your PC specification indicates that it came with W8, you would have needed to go into the BIOS, disable secure boot and turn on legacy mode so that the video card working.

  Otherwise you would have obtained the alarm beep 6 just after you installed the card.

  Then... I think that what has happened, is the set of update of the BIOS the BIOS of your computer to its default settings (off legacy mode, active secure boot) and now your video card is rejected.

  Recommendation... stop, unplug the PC and remove your add on video card.

  Plug power on your PC and to go into the BIOS, turn on legacy mode and disable secure again boot.

  Shut down the computer, unplug it and reinstall your add on video card.

  See this link for the BIOS settings need to be changed...

  http://support.HP.com/us-en/document/c03653200/

• HP xw4600 workstation: setting up dual boot and BIOS storage options

  I have a HP with Windows 7 Professional 64 bit xw4600 workstation. He resides in the SATA location 0.

  I have a separate hard drive Linux Mint 17.1 installed. He resides in slot SATA 3.

  I want to set up a dual-boot option to start Windows or Linux.

  In the BIOS under storage... Storage options must be set to RAID or AHCI? (I don't want a backup RAID configuration. I have cloned my hard drive to another hard drive in the SATA 2 connector, the DVD burner is in the SATA 1 connector).

  It seems that the computer will boot only from the hard drive to the SATA location 0.

  If I disconnect the hard drive to the SATAS location 0 which has Windows 7, I get an error in the message of wiring.

  If I use the boot F9 option, my choice is the hard drive, but I can't specify which.

  I can't find anywhere to change the HDD boot order in the BIOS.

  Any help will be apprecaited because I want to avoid opening the case and cables around switching.

  Hello

  You can get assistance on the HP Enterprise Business Forum since you have a professional workstation.

• Quadro Fx3800 problem on HP XW4600 workstation

  Hello, today I bought a graphics nvidia quadro fx 3800 and then installed it but when I turned the power to the computer on the system starts without showing any display and then system turns off after a few seconds the entire system again off on turn again and again, he repeated this about 3 t0 4 times and after that this system turns on and beep began to occur.
  My system is the Hp xw4600 workstation
  CPU:3.0 core 2 duo e8400
  RAM: 4 GB
  hard: 320 GB
  PSU:475W
  I explained the problem, but I don't know why she is doing this because I connected the PIN six to six port pin on the graphics card. Y at - it extra to connect to the graphics card wires or is there any other problem. According to hp, hp xw4600 supports this card on the card I said.

  Hello, IDA.

  Your device is a commercial device to get your question I would post in the trade forums more exposure. You can do so at http://h30499.www3.hp.com/hpeb/

  Thank you

• Satellite M65 gives two beeps and won't start

  Hi all

  Need help. Why I turn on my Satellite M65, it gives just 2 beeps and nothing happens.
  No display. Tried the Express Media Player too... same thing.

  Can any body want to say 2 beeps?

  Thanks in advance!
  A. Moiz

  Thanks for pointing this out!

• Impossible to update "site has encountered a problem and cannot display the page you are trying to show."

  When I try to update either using the can I Update or Microsoft Update I get the following message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "

  When I open Microsoft Security Essentials and click Update I get the following message: "the Virus and spyware definitions failed and an error code: 0 x 80070424 message.»

  I am unable to get the position of automatic updates to turn on. I followed a few threads that says run "services.msc" Background Intelligent Transfer Service is ongoing as is the workstation but automatic updates does not appear!

  I tried auto Fix It and automatic installation of updates, but still no luck.

  All the other programs on the seam of my computer for updated correctly. and seams of browser to work properly. I also tried dissabling my firewall and adding the site to my trusted sites update and that didn't work either.

  I'm on PC based on Microsoft Windows XP Professional 5.1.2600 Service Pack 3 Build 2600 on a Toshiba X 86 vs

  Q: which antivirus application was installed before installing MSE, was your subscription always news, and did you uninstall it before installing MSE?
  A: I do not uninstall [McAfee Security Center before] I installed MSE...

  See...

  Checklist for installation of Microsoft Security Essentials
      http://answers.Microsoft.com/thread/bf757e6a-E320-4a67-92bc-767e6acb26c4

  Should I have any other antivirus software and Microsoft Security Essentials?
      http://blogs.msdn.com/b/securitytipstalk/archive/2010/09/08/do-i-need-both-Microsoft-security-essentials-and-another-antivirus-software-program.aspx

  ======================================

  You could try the following:

  [You may want to print these instructions for reference offline. [If a step said to restart, restart!]

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  1B. download the Norton removal tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3 uninstall McAfee Security Center & reboot.

  4. make sure that the Windows Firewall is now enabled.

  5. If S * PERAntiSpyware is always installed, uninstall it and reboot again. If not go to # 6's.

  6. double-click on the file that you saved in # 1 a above, to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. double-click the file that you saved in # 1 b above to run the utility. DO TAP not your keyboard until the race ends, then reboot again.

  7. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the automated troubleshooter from end to end. [1]

  9 restart a last time & test. Make absolutely certain that you can update MSE manually using the update on the update tab button.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• ESXi 3.5 U3 in workstation 6.5 and server 2.0 installation

  Setup an ESXi server in a virtual machine seems to be a good approach to test and play arround, I thought...

  Compared to the search for a cheap HW to set up a physical ESXi, it should be much easier, I thought...

  I am a beginner with ESXi...

  Looking arround VMware communities and internet it turns that there seems to be so much confusion

  on how to configure a virtual machine as on how to configure a physical server with ESXi!

  What I think about the approach of the VM is the following (which can be useful for others...):

  • Setting up ESXi virtual machine seems to be possible with a few tricks, tweaking the vmx file, etc.

  • VMware Workstation 6.0 and 6.5 so that VMware server 2.0 should support this approach.
    There seems to be some gurus VMware autour, who has set in motion...

  • It should work on Intel and 'new' AMD dual core CPU.
    We should have supported 64-bit virtualization HW and DEP (HW data execution prevention)

  • We should have a 64-bit OS, where we install 2.0 Server or Workstation 6.x, but it is only a requirement, when we intend to run the 64-bit within the limits, no clients?
    ESXi from my understanding is not 64 bit application but a 32-bit, right?
    So it seems useless for an OS 64 bit on our machine.
    If we do so, we need to know, we can only install 32 bit OS in our ESXi server. But this is suffient to test...

  So far so good, let's do it. I'll start with the VMware workstation 6.5 I just got.

  My test platform:

  • AMD Athlon 64 X 2 5200 +, 8 GB RAM, card mother ASUS M2N SATA drives, etc.

  • Windows Server 2008 SP1 Datacenter Edition

  • VMware Workstation 6.5.1 build-126130

  What I did then:

  • Installation of a new virtual machine in VMware workstation with these settings:
    -OS comments: other
    -2 processors
    -1048 MB RAM (have seen comments saying 1 GB is not enough, need a little more than 1 GB)
    -VMware HW version: 6.5
    -10 GB disk, SCSI, persistent, preallocated not (you can also use allocated in advance, if you have enough free space)
    -1 bridged NETWORK adapter
    -3 custom maps (VMnet3), for later use...

  • CD/DVD (IDE): connected to ISO: F:\VMware6.5-VMs\VMware-VMvisor-InstallerCD-3.5.0_Update_3-123629.i386.iso

  • Did not start the virtual machine now but check/add something to the vmx file created:
    -Add the following:
    Monitor.virtual_exec = "hardware".
    monitor_control.enable_svm = 'TRUE' (for AMD, but this seems to be an old not more necessary framework for ESXi 3.5 U3?, not sure so left in it)
    monitor_control.restrict_backdoor = 'TRUE '.
    
    If you have INTEL CPU, use:
    monitor_control.vt32 = 'TRUE' (for Intel, but this seems to be an old not more necessary framework for ESXi 3.5 U3?)
    
    -Check the following lines and correct if necessary:
    scsi0.virtualDev = "free".
    ethernet0.virtualDev = "e1000".
    Ethernet1.virtualDev = "e1000".
    ethernet2.virtualDev = "e1000".

  
  ethernet3.virtualDev = "e1000".

• Then propelled to the top of the virtual machine:
  -L'installation began of the ISO
  - And now he's going very slowly...
  After about 3 or 4 h this typical yellow screen disappears and a black rises!


- [F11] displays some strange error messages, see attached screenshot
-Installation appears to hang now...
-Oh no, he's just a little (the installation screen initial is again coming (welcome...) Please select CANCEL / REPAIR / INSTALLATION)
Of course, the virtual machine has restarted but there is no bootable on the boot disk installation?

It's at least the 5th or 6th attempt to operate, very frustrating!
Wait for, after all these good and useful, advice I found before.

Question: Why does close to 4 hours, then ANDS upward with an unbootable installation?

Anyone has an idea what is wrong?

What Workstaiton 6.5, which is causing the problem

Even I did something stupid ot totally wrong?

What these error messages (see attached)?

Obviously, they have developed at the beginning of this facility and then it happened.

Tomorrow will try the same server 2.0...

Any help appreciated,

Hans

What jmattson forgets to tell you, is that workaround for version 0F the AMD CPU is always available in workstation 6.0.x

It has been removed for ease of maintenance of the code and well... the processor will forever be...

So you should be able to get ESX running under Workstation 6.0.x

Another clue is that the families of processors numbers are written in hexadecimal notation not in decimal form as humans like to use...

We programmers tend to forget that you ignore maybe 0F (hex) = 15 (dec) and only 10 (hex) = 16 (dec)

So 10 (H) is just family version 16 and you're still on 15.

--

Wil

• MacBook Pro done three short beeps and a pause.

  MacBook Pro made three short tones beeps and flashes the power on light then made a break of approximately at the same time it does beep. What it repeats. I stopped it by cutting off all the external references and by pressing the switch for about 10 seconds. Any thoughts?

  It turns out that I must have accidentally open the clip of RAM when I upgraded my HD up to 1 TB. High memory was loose and tilt. Carefully, I removed the memory and then reinserted it. Back to functional without beep.

• ASUS GeForce GTX 750TI install on Pavilion P6 2010UK leads to 3 beeps and black screen

  Hello

  I recently tried to install a 750TI Asus GeForce GTX on my HP Pavilion P6 2010UK using a SATA 6-pin PCI Express power connector, but after starting I get three beeps and a black screen. Can someone help me with this please?

  As an observation, the PC was working fine before you install the new card.

  Hello

  Many of the graphics cards NVIDIA GTX 750 will not work in the HP PC that do not have a BIOS version 8.  Your PC has a BIOS version 7 and I do not expect HP to publish a version 8 BIOS for your PC.

  Return the card and try one of the models that should run on a PC equipped with a legacy BIOS.

  MSI NVIDIA GTX N750 TI and the MSI GTX N750 TF

• After Bios Update satellite A10 had totally frozen and the display is blocked

  Hello

  Today, I tried to update my Bios of satellite A10 to 5.20.
  I downloaded the unziped file and executed, as recommended in the instructions.
  After restarting the system, the laptop completely froze and the display is blocked. So, I am unable to do anything...
  How can I solve this problem?
  Thank you very much in advance.

  Wait a moment you sure you used the right BIOS?
  As you say, your laptop is that a Satellite A10 is good?

  I visited the Toshiba driver page and play the version of the BIOS and. It s 1.30!

  Sorry to say but it seems that you used the wrong BIOS!
  You should know that the update of the BIOS is always risky. The bad BIOS or bad update may damage the jury!

  I put t know how to help you try to use the good BIOS. Maybe you are a lucky man and it will work. If not, contact the technician

• a short beep and 1 beep on hp pavilion media center 8120n

  My Tower is not start when I turn it on.  My son took off the side and that he was going to put more memory in it for me, but in the end it didn't.  He put the memory old back in and put the side cover back on.  Today, when I turn it on, it has 1 short beep and 1 long beep.  It just won't boot to the top.  Can someone tell me what I should do to get this operational return?

  RBurke, welcome to the forum.

  The BIOS beep Code you hear is due to a memory problem.  Here's a guide that will help solve the problem:

  http://support.HP.com/us-en/document/bph07107

  You should read the entire page.  Beep codes common to HP computers are towards the bottom of the page.

  If your problem is solved, please click "accept as a Solution.

• Satellite A210 - cannot install common module and driver display

  Just down to XP, downloaded drivers from toshiba and the installation was completed with an error not saying no driver found for my hardware. That's happened with the common Module and ATI Display Driver.

  I mean, I need em both!

  Help!

  Hello

  I checked the page European driver of Toshiba and it seems that XP drivers have not been to this A210 series!

  I think that you just tired to install common Modules is not supported on this laptop.
  That is one reason why you can not install it.

  With regard to the display driver.
  Try to install the drivers for the laptop models:
  PSAEJE satellite A210
  Equium A300D PSAK2E
  Equium L350D PSLE2E
  Satellite P200 PSPBLE
  Satellite L350D PSLE0E
  Satrellite L300D PSLC0E

  In my opinion, one of the pilots freed from these series should run.

• Desktop HP Pavilion h8-1150z: desktop HP Pavilion h8-1150z - 6 beeps and no start

  My Home Office HP Pavilion (Pav HP h8-1150z AMD (Angelica) 3 c NAPC) is about 3 and a half years (and apparently 6 months past my HP Care Pack coverage extension).   It runs Windows 7.  Yesterday while the computer was not idle, he began to make a new sound of snoring (a bit like a fan noise).  So I stopped the machine.

  Now, when you try to restart, it gives 6 beeps and goes no further.  It's always a little strange noise of snoring.  After my research, it looks like it's some pre video failure.

  I tried to remove the graphics card and re-sitting there.  While I had the video card, I tried to restart.  The sound of snoring had gone, but still have the 6 beeps.  While the Office has been opened, I also reinstall memory and blew out the dust.  Still no luck.

  I've seen a few suggestions to clear CMOS but don't know what I would need to do it with this machine.  I unplug the machine and press down the power button for several seconds to erase any residual power.

  Any suggestions/recommendations?  If it looks like my graphics card has gone bad, any suggestions on how to buy a compatible replacement?

  Thank you.

  old_geekster,

  I talked to Support PNY and they agreed that the graphics card, I bought should be compatible but does not appear (maybe because I was running an old version of the bios on the HP computer, but I found myself stuck in being not able to update).

  So I ended up finding another graphics card (EVGA GeForce 8400 GS 1 GB DDR3 PCIe 2.0 graphics card 16 x) and that did the trick!  Once I have installed the new card I was back running.

  Thank you once again for all the help you have provided me and your community support!

• Windows failed to update for HP - Bus USB and Ports, display controllers - HP w2408 widescreen LCD

  I have a new HP M9402 desktop with monitor Hp W2408 Summit.  I get a message to update windows for HP - Bus USB and Ports, display controllers - ACL from HP w2408 widescreen, but the windows download always fails.  I tried several times to download this update.

  Any help would be greatly appreciated.

  Hi all

  The solution to my problem of not being able to make updates to the window was to spend in an HDMI instead of VGA cable.

  BR / / JJG