HP Z620: Problem of auxiliary graphic workstation HP Z620 pci-e power connectors

Similar Questions

• Workstation HP Z620 dual xeon: really only 1 6-pin power connector on the graphics card?

  Hello

  I have a question about the HP Z620 workstation.

  recently bought a dual xeon with 960 GTX installed on the 6-pin connector.

  as I can't find any other power to use nor on the power connector

  or nowhere on the set, I wonder how a graphics card must be powered only

  needs

  1 x 8-pin

  or

  1 x 8-pin + 6 pins

  or

  2 x 8 pin?

  I know there are some discussions about this in this forum, but I did not understand

  the solution. Some said there are adapters to go 6-pin to 8 pin (or 6pin to 2x8pin)?

  But how is that possible?

  like many, I know, 75 watts are max of the pci-e connection, 75 other watts Max for 1x6pin.

  so plug any adapter, 1x6pin for graphics cards that need much more power would be

  According to the standard / danger, right?

  and what about graphical installation double?

  would be happy if someone around could help me with this.

  best regards

  Chris

  The search box on this page by default search only this forum, and it is very convenient.  If you type "extra", you will find a lot of info.

  The Z620 has two of these 6-pin cable, and HP got creative and molded into two empty containers down to the black plastic fan holder before.  So, one is being used by you and the second is sitting there plugged and similar, it is used, but it is stored just it did nothing... the fan is powered differently.

  These extra HP 6 - pin PCIe power cables are not standard ATX... they are better.  The ATX standard is 75 watts can go up to the card out of the slot, and another 75 watts can come via the additional 6-pin cable.  HP 6-pin cable can do a bit more.

  This is the message that you want to read, and there there details that were not in any of the HP manuals that I searched through, but the answer was on the label of Z620 power supply.  12V 18A each, plus adding info on some special HP adapters that allow you to take a HP 6-pin and divided to two 6-pin connectors or cable HP 6-pin connector 8 pins.  Watch here.

  http://h30434.www3.HP.com/T5/business-PCs-workstations-and-point-of-sale-systems/HP-Z620-workstation-PCI-e-auxiliary-graphics-power/m-p/5651091#M12740

• Workstation Z600: card graphic Workstation Z600 error (Six beeps)

  Hello, this is my first time posting in the forums and I can't upgrade my video card. I'm relatively new to the PC upgrade, so bear with me.

  Currently, I use a HP Z600 workstation with a graphics card XFX Radeon HD 6670 1, without any problem. I have two slots for PCIe 2.0 x 16, and I've read that I should be able to also use cards which have PCIe 3.0. The 650W power supply also has a power cable 6 unique pins.

  The new card, I am using is a MSI Gaming R9 8 390, which uses the PCIe 3.0 and locations for a 8 pin and a power cable 6 pin.  When I replace the video card and you turn on the system, the repeated red power button blinks six times, each with a beep. The light on the card, but fans do not rotate, which may actually be a feature of the map in order to stay calm.

  So far, I was able to use a location for both, power cable or the 6 - 8 pins (using the 6-pin to 8 pin adapter supplied with the card). I tried the switch between the two slots (slots 2 and 4) PCIe card, but I still get the power button flashes red when turned on. I've also updated my bios to v3.57.

  I am able to start the computer when I replaced the HD6670, without the beeps. I tried to have 390 R9 also connected, but it does not appear in the Windows Device Manager.

  For me, it seems that the motherboard is not just pick up the card. Is it possible that the right card is not correctly powered and I need a power splitter cable? Have I not a card that is dead on arrival? Or is the 390 R9 simply incompatible with my system?

  I solved my problem by using the separator.

  In case someone else also try to upgrade their system gpu, it is indeed necessary connect the two power of the graphics card ports. Once, my card was required a 6 pins and a PCIe power plug 8-pole, and I used just splitters and adapters to connect to the extra cable 6 pin of the Z600.

  Beware however: because my card uses a decent amount of power, I had to underclock my card about 10% or my rig will re-start himself when running 3D applications. I read online that it can be solved if you use a separate extra, external power supply or connect to another pc supply, but I am satisfied with her downclock so I will do that now. Still, you can't replace the power supply of the Z600 because it is designed specifically for this workstation.

• Satellite M30 - problem with the graphics driver and Quicktime movies

  I just installed a 40 GB to 80 GB hard drive and installed all the drivers in the correct order, as indicated by toshiba. Everything works well except the used for Quicktime .mov files. All I get is audio but no image - other than a colorful blur screen!

  I think I've isolated the problem to the graphics driver. Whenever I turned off / uninstall the driver dedicated for the graphics card FX 5200 GP (version 4.6.44) Quicktime files work fine. It is only when I installed the dedicated driver problems occur!

  Can someone tell me why this might be?

  Hello

  Do you use the graphics driver from the Toshiba driver page?

  Try to use the QuickTime Alternative 1.77. In this version the codex QuickTime has been updated.
  This version uses these features:

  -Media Player Classic [version 6.4.9.0 + SVN build 2006-12-24]
  -Codecs QuickTime [version 7.1.3.100]
  -QuickTime plugin for Internet Explorer
  -QuickTime plugin for Opera/Mozilla/Netscape
  -Extra plugins for QuickTime
  -QuickTime DirectShow parser
  -Wrapper DirectShow QuickTime decoder
  -CoreAVC 0.0.0.4
  -CoreAAC 1.2.0.575

  check it out...

• Problems with the graphics to Equium A60 driver

  Hello everyone,

  First sorry for my bad English.

  I have some problems with my graphics card driver. After a new installation, I wanted to just install the driver for the ATI Radeon 7000 (I have an Equium A60), after that, I noticed that my pc was down. The problem was because the driver, I'm sure, because after a fresh install, without the drive VGA, my laptop works, somehow... I mean, I don't know it might work if the graphics would have a clean driver better.

  I searched on the web and saw that it was not a new problem; many people have the same problem with it. Somehow, the driver of the computer is not compatible.
  Could someone help me find a solution to my problem?
  Thank you very much

  Eurytheus

  Sorry my friend, but your ad looks really amazing. Driver Toshiba of origin is not compatible with the hardware. It cannot be. It cannot be the truth!

  Your model of laptop is almost 4 years and I assume that Toshiba had enough time to react if the display driver is somewhat problematic. I recommend you to backup all your data and try to install your laptop using original recovery image. If there is no hardware problem notebook should work again well.

  Sorry, but I don't see another solution because the pilot is certainly tested and it should work.

• Problems with the graphics card on Satellite Pro M10

  Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

  I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

  This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

  1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

  2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

  3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

  4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

  5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

  I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

  Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

  see you soon,
  Cozmo

  Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

  Hi Cozmo

  I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

  In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

  Sorry Cozmo but I do not see any other logical solution for you.

  Good luck!

• Satellite A200 and Win7 - problem loading the graphics driver

  Hi guys I have a problem with my Satellite A200 (PSAF6A).
  I installed windows 7 just now, now half the time when I start the computer it displays a message on windows encounters a problem loading the graphics drivers and the resolution is terrible. When I restart immediately, most of the time, it loads fine - no message and a good resolution. I tried many driver reinstall but it is always the case.
  Someone knows what's the problem? Is this with windows 7, or do you think the graphics card can be on the road to extinction?

  Thanks for your help, a lot.
  -Chris

  Hello

  It was ok before installing windows 7? I don't think it's a hardware problem. Have you installed the driver for the Toshiba driver page?

• Problem with double graphic

  I have the HP PAVILION G6 model 1202TX. It is built with dual INTEL and RADEON graphics. INTEL - Intel HD Graphics 3000 and

  AMD Radeon (TM) HD 6470M.earlier accidentally, I've lost my windows and its drivers, but my main problem is with graphics of ts. If I install the AMD drivers that shows a problem with INTEL graphics card notification bar and if I install INSTALL it shows with RADEON question. After the driver installation, whenever I restart my pc AMD shows a dialog box, and then if I install AMD, INTEL keeps poping up notification bar in the lower right corner of the pc it something related to the SYSTEM TRAY INTEL GRAPHICS card.

  Now, I have installed INTEL graphic driver I have and every time ii restart my pc it displays a dialog box

  This appers to dialog box every time I start my pc

  PLEASE HELP ME

  Hope for action freequent

  THNK YOU.

  Hi ashwani26596,

  We will start by using the HP Support Assistant to check updates and drivers to see if that solves the problem. If this does not work then go to your Panel and then programs and features and uninstall the Catalyst Control Center. Then try to install the Driver for high definition Audio Intel and AMD High-Definition Audio Driver.

  Thank you

• HP Pavilion g7-sr2377 Nr. D2H11EA #ACB problem with switchable graphics

  Hello everyone.

  I have a big problem with the graphics switchable on HP Pavilion g7-2377, it does not work.

  Main graphics card: Intel HD 4000

  Discreet: AMD Radeon HD7600

  I'm using a Windows 7 Ultimate x 64 operating system. Can someone help with this problem?

  Hello:

  The AMD driver install drivers for the AMD and Intel GPU.

  You can install the Intel driver or try to update all the drivers or switchable graphics do not work.

  It is the only driver that you can always use if you want the chart to work right.

  They don't update the graphics drivers switchable because it probably costs too much time and money to 3 companies to work on keeping up-to-date.

  The only time where they would never update switchable graphics drivers would be if there was a bug in that they come out.

• Message: A problem of NVIDIA graphic driver / Answerr: this solution could not be downloaded? Internet is ok!

  Message: a lot of time: a problem of NVIDIA graphics driver.

  Answerr:

  This solution could not be downloaded most likely causes: Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  Internet is ok!

  Hi Antonio,.

  1. do you do the pop up "A problem with NVIDIA Graphics Driver" and after that "this solution could not be downloaded? If Yes, since when are you facing this problem?

  2 are facing problems on your computer to display?

  3. do you get this error when you are on a particular application or perform a specific task?

  Log on to the manufacturer's Web site and download the latest drivers for the graphics card installed on your computer.

  Drivers - Download NVIDIA drivers

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Please post with the State of the question.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• Problems with the graphics card when you use AutoCad

  Hi, I have a dell xps 18.4 - i7 with 8 GB of RAM, when I'm working with Auto CAD I face problem with my graphic card, what can I do to fix this? has any experience with that? the graphics card is Intel(r) HD Graphics 4000

  Hello

  Thanks for the reply.

  I'm sorry for the late reply.

  I appreciate your patience.

  I suggest you to try installing the driver in compatibility mode and tick.
  Reference:
  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Please keep us informed.

  Thank you

• I have a problem with a graphic refreshing after its related data provider changes.

  I have a problem with a graphic refreshing after its related data provider changes. After calling the subsetHighLowData.refresh () I expect the table to redraw, but he looks always the same. I even checked the debugger to see if the range had occurred and he had.
  
  Ideas of friend codes?

  "nikos101" wrote in message
  News:gib6aa$PRR$1@forums. Macromedia.com...
  > I have a problem with a graphic refreshing after its related data provider
  > changes.
  > After calling the subsetHighLowData.refresh () I expect the graph
  > to
  > redraw, but it still looks like the same. I even checked the debugger to see
  > If
  > the slice took place and he had.
  >
  > Any ideas friends coding?
  >
  > subsetHighLowData.source =
  > highLowData.source.slice(slider.values[0],slider.values[1]);

  Just use the removeItemAt collection ArrayCollection, and it must handle the event
  a distribution for you.

  HTH;

  Amy

• There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled error code 39.

  HP Pavilion 17 laptop

  There is a problem with the driver for Ralink Bluetooth PCIe Adapter. The driver must be reinstalled.

  OT: Driver help

  Name:	PCIe Ralink Bluetooth adapter

  Error code:	39

  Hello

  Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  What is the number of full model of the laptop?

  39 error code means Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. To resolve the problem, you will need to uninstall and reinstall the drivers for Ralink Bluetooth PCIe card on the manufacturer's Web site.

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Quadro Fx3800 problem on HP XW4600 workstation

  Hello, today I bought a graphics nvidia quadro fx 3800 and then installed it but when I turned the power to the computer on the system starts without showing any display and then system turns off after a few seconds the entire system again off on turn again and again, he repeated this about 3 t0 4 times and after that this system turns on and beep began to occur.
  My system is the Hp xw4600 workstation
  CPU:3.0 core 2 duo e8400
  RAM: 4 GB
  hard: 320 GB
  PSU:475W
  I explained the problem, but I don't know why she is doing this because I connected the PIN six to six port pin on the graphics card. Y at - it extra to connect to the graphics card wires or is there any other problem. According to hp, hp xw4600 supports this card on the card I said.

  Hello, IDA.

  Your device is a commercial device to get your question I would post in the trade forums more exposure. You can do so at http://h30499.www3.hp.com/hpeb/

  Thank you