HP Z620 workstation: HP Z620 Workstation - WS displays video & Fans Spin loudly or fails - red light with 8 beeps

Hello

I have a HP Z620 workstation.

My processor is an Intel Xeon E5-2660 SR0KK 2.2 GHZ 20 MB 8 GT/s LGA 2011 8 - Core CPU.  More correctly, it's a category of Xeon E5-26xx (dual processor), 8 cores, frequency 2.2 GHz, turbo 5/5/6/6/7/7/8/8, 8 × 256 KB L3 cache 20 MB L2 cache, 95 W TDP, Socket LGA 2011, i/o bus 2 × 8.0 GT/s QPI, × 4 memory DDR3-1600, release date 6 March 2012, CM8062107184801 part number.  This is version 1, not version 2, which is good because the card in my system startup block date 20/12/2011.

I am using Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Server Memory.   (J'ai également essayer écarter un problème de mémoire utilisé FUREUR de Kingston HyperX 8 GB Kit (2x4Go) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8)) as well as herself, to see if that makes a difference.)

I don't know how to identify my system board other than the one she reads only numbers as "FMB-1102" and "PBLNV0GCY4N0TF" and "such as #618264-001 REV 0 G'.  He has "hp (copyright symbol) 2012 ' and"E93839"and"FXN1"written on it as well.  (After some searching I guess it's card mother 618264-001.  Which differ a card system like 619559-001 - a model later?)

My graphics card is a XFX R7 240 780 MHz 4 GB DDR3 HDMI DVI VGA graphics card.  (I also try out a video card problem used an EVGA Nvidia GeForce GT 620 1 GB DDR3 SDRAM PCI Express 2.0 x 16 video card to see if it would make a difference.)

Regarding the power supply, the power supply standard HP Z620 computer PC 800W Power Supply S10-800P1A 623194-002 717019-001.  (I have more than one and who have tried also.)

With respect to the hard drive, I have formatted and reused a WD Blue 500 GB Desktop hard drive - 7200 RPM SATA 6 Gb / s, 16 MB Cache 3.5 inches - WD5000AAKX.

My problem:

1 regardless of what video card I use, if I use the FURY of Kingston HyperX 8 GB Kit (2x4gb) 1333 MHz DDR3 CL9 DIMM - black (HX313C9FBK2/8) memory and starts, I get a blue light, no beeps, no code of message I can say.  However, no tension of the video card (fans not spin) and no power is supplied to the drive hard (do not load and run).  I get a blank screen and can see nothing.  Back fans begin to turn in very strong and turbo mode.

2 regardless of what video card I use, if I use the Kingston ValueRAM 16 GB Kit (2x8GB) DDR3 1333 MHz DIMM Desktop Memory Server, I get a red light and eight beeps which means a kind of ROM BIOS/CMOS-problem problem problem.  To this end, I tried pressing the button Clear CMOS without result.  I removed the CMOS battery for a sufficient period of time and again.  Nothing changes this situation.  It only happens when I put this special memory in the computer.  If I stick a USB Thumb Drive with file BIOS (BIN) in it which is 3. XX or higher, it will boot to the BIOS on a limited basis.  I also had to understand that I couldn't do anything with a USB keyboard, I could only select options using a PS/2 keyboard - maybe it crashes on some USB devices at this point?

3. I understand that if I let the rider of recovery from crisis on the 2nd and 3rd pins rather than pins 1 and 2, that it will load from a backup and I can actually do things.   On this basis, I was able to install Windows 10 education 64-bit and a host of programs and otherwise, use the computer normally.  But I can't start unless I have keep that crisis rider of recovery set to pins 2 and 3 and so he can start in the operating system normally by pressing F1.

4. I while on Windows, updated the BIOS to the latest version, HP Z420/Z620 Workstations system BIOS 3.90 Rev.A (August 8, 2016) using sp77058.exe (19 MB).  I've also updated other drivers as I could with the HP SoftPaq Download Manager (SDM).  None of this changes the problem at initial boot upward.  At the start he complains front chassis fan does not turn, but this is not a problem I have printing allows to stop a boot to the top, it would give just a warning and still boot normally.

Well my computer works and does that as long as I keep this crisis recovery jumper on.  But I feel that I should be able to solve the problem and he can begin without interference and without resorting to a measure as drastic.  Suggestions anyone?

Thanks in advance for your time.

MR. J.

Juggerknight,

Keep the rider of recovery of block starting on pins 2 and 3 of E15.  It's 'off' because the 3 pin is not connected.  Put the jumper to pins 2 to 3 "parks" the rider.  Put the jumper on pins 1-2 active boot block recovery mode, and the system does not start with the jumper in this position 'on '.  (You have already discovered this)

In addition, do not mix unbuffered and registered in the same system memory.  Use either one or the other.

Tags: HP Desktops

Similar Questions

  • Photos of the iPhone continues to display "video download" when there is no video to download

    iPhone with iOS 9.3.2 6s.  Photos app continues to display "Video 1" when there is not download videos.  Have restarted the iPhone, a hard reset on iPhone and shot Photos market app in settings.

    You say that there is no video at all on the phone? Or you think that the video has already loaded?

  • Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    Hi all

    Problem: Build a VI to display a string in the table of the lights. Each letter must be posted in a separate table and letters must move from one table to the other in the direction from left to right.

    I did program mentioned above but it does not work. Can you tell me what is the problem?

    There is no error is indicated in the program. If someone knows about it please try to find solutions and help me out of this problem.

    I have attached my program with this message.

    Thank you in advance!

    (1) FOR loops are your friend here.  You can make a slight restructuring using loops, and then you will have less mess to deal with, the inner loop through tunnels of autoindexing to make it even simpler.

    (2) I would only treat the numeric values of the characters.  So go terminal of control of the chain, the capital letters and byte array to before the outer loop.  You can use a size of Board over there to tell how many times the outer loop to iterate.

    (3) the Index table is extensible.  So you only need over the index of the first, and it will increment itself, as it develops.

    (4) you need to finish the lookup table (table 3D)

  • I want to display the number of success / testing failed in the Testtand of xml report, please help me

    Hi, I want to display the number of success / testing failed in the Testtand of xml report, please help me.

    Later, my requirement is that I should be able to view the number of test / has not passed in the header of the report too.

    I have attached a sequence to give you an idea of how to get the number of results (I don't check it works ), I used 'SequenceFilePostResultListEntry' callback to calculate the number of results.

    and the number of results is passed to the 'ModifyReportHeader' through Globals files, where you can edit the XML file to display in the Repot (follow the link in my previous post).

    Hope this helps

    AshwiN,

  • I have a problem with an error in windows media center: ERROR VIDEO files needed to display video are missing or corrupt.

    The error is: ERROR VIDEO files needed to display video are missing or corrupt.

    I Run Setup and restarted my computer at a later date.  I've always been unsuccessful.

    Can anyone help. Thank you

    Update your graphics card driver. Visit the manufacturer's Web site to download and install the latest graphics driver. Once proceed as follows: -.

    You must uninstall and reinstall the tv tuner card driver.

    1. start.

    2. in the start search box type:devmgmt.msc and press the Enter key.

    3. scroll sound, video and game controllers and expand it.

    4. right click on tv tuner card and uninstall it. Uninstall the device as software driver.

    5.reboot.

    6. visit the manufacturer's Web site to download and install the latest update and compatible tv tuner card tv tuner driver.

    7. now open Windows Media Center and re-run the whole upward.

  • Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

    I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

    Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

    The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

    Maybe my computer is a militant fan of Star Wars?

    Windows XP Media Center 2005

    If this only happens in a show on a channel and passes every day but others
    shows on the same channel are watchable/recordable, it is possible that a copy
    never flag is set that is manifested by the video display
    error message.
     
    I would recommend that you post this topic on the forums of http://thegreenbutton.com .
     
    Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
     
    >
    >
    > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
    >
    > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
    >
    > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
    >
    > Maybe my computer is a militant fan of Star Wars?
    >
    > Windows XP Media Center 2005
     

    Barb Bowman

    http://www.digitalmediaphile.com

  • Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

    Please help - it's driving me crazy! I got this to work!

    I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
    "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

    I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

    My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

    I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

    I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

    I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

    The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

    On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

    Any help would be really appreciated!

    Hello Lowwatts,

    Microsoft Xbox 360 community

    Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

    Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

    Community Microsoft Xbox360

    Try following the steps in this article:

    Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: Files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer

    Original title: windows media center

    I have reinstall Win 7 and finally managed to the precious WMC got the signal, channels, etc., but when I select all the channels I get this: "the files needed to display video are not installed or do not work properly. Restart WMC, or restart the computer. "I have resource disc and have re-install the drivers and utilities to the best of my limited knowledge. Help, please

    When I type in run in the start search box, it only pulls up "run programs for previous versions of windows" I can't run your steps without responding to this prompt.  What should I do if I can't follow your steps as you put it?

  • HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start

    Hi @all,

    I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.

    Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.

    Can someone guide me on how to solve this problem?

    Thank you very much in advance.

    I don't see the screenshot of your post attachments. Please repost them.

    This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS.  If you keep trying to update the BIOS there will come a time where everything you have a black screen.

  • BSOD 'ATTEMPT TO RESET DISPLAY DRIVER AND RECOVER FROM TIMEOUT FAILED'

    Have uninstalled and reinstalled several different drivers working for my ATI Radeon 4850 graphics card, enhanced help uninstall to completely clean out the old driver.  Yet the BSOD "ATTEMPT TO RESET DISPLAY DRIVER AND RECOVER FROM TIMEOUT FAILED" persists!  It must be either a hardware problem, or something in my system is corrupting each new driver installed.  During start-up small red dots like the semicolons appear on the black screen.

    Someone at - it ideas?

    When the pilot is off my machine works still but roughly.  When the driver is disabled is the video card died with my work machine entirely from the BIOS.  or is the video card still operates with a crude driver from the bios?

    Am I correct to observe that this problem only occurs with AMD graphics cards?

    Thank you

    MIke

    This was related to your video driver 4 year and liked it, I delete the current driver and install the latest driver available.

  • Media Center won't play by video converter USB error ""files needed to display video are not installed or not working properly. " Restart the computer or Media center.

    I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor. What is the problem? Can it be fixed? I use questions cable 'Câble questions SuperSpeed USB 3.0/2.0 to HDMI/DVI for Windows and Mac up to 2048 x 1152/1920 x 1200' with windows 7. Is there another brand and model that works?

    On Wednesday, September 3, 2014 13:19:09 + 0000, CharlesHickox wrote:
     
    > I use USB to HDMI. TV, it is attached to works very well with the screen of the PC, but not with windows media center. Get the error message "the files needed to display video are not installed or do not work properly. "Restart Media center or computer" whenever I have to plug the usb device and you try to play a video in wmv recordedTV. Otherwise, it works fine on the PC monitor.
     
    I assume you mean WTV and not the WMV files? Likely the reason is that the adapter
    questions of cable is not HDCP compatible. (Rules of DRM Media Center
    apply).
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     
  • Problem with Windows Media Player: "Server execution failed" and "files needed to display video are not installed or do not work properly.

    I have a problem with Windows Media Player on laptop Lenovo G780. My laptop is under warranty (bought a month ago), but technical support Lenovo told me that the Windows Media Player program is not covered by the warranty.

    And this is a problem:

    When I click on Windows Media Player - to about 0.1 sec I see it opens and closes the window and nothing happens.

    When I select a mp3 or wmv file and right-click with the option open with Windows Media Player - I get a message: "Server execution failed" - I checked that all services with 'Media' in the name are running.

    When I select a mp3 or wmv file and right-click with the open option with Windows Media Center - Windows Media Center opens with the message: "the files needed to display video are not installed or do not work properly.

    When I select a file mp3 or wmv and right-click with option open with Windows Movie Maker life - see the video

    I tried to turn / WMP and WMC - did not help
    Tried to run as administrator - did not help
    I don't see something suspicious under events

    What can I do else?

    Thank you

    Zarek

    I had the same problem and then by chance, I tried a video on YouTube and it worked for me. Here's how I went on this issue and solved my problem:

    1. go to the computer, then OS (C).
    2. you will need to open Program Files (x 86) and Program Files.
    3. go to Windows Media Player in Program Files (x 86) and open the folder.  Then, remove the wmplayer file.  You may need to work around the error TrustedInstaller.  I'll tell you that, in a moment.
    4. in Program Files, go to the same folder for Windows Media Player and select the same file again. Wmplayer.  Copy the file in another window open.  Copy ensures that if the question comes up again you can at least try to fix it again.
    This should be the end of your problem.  If you need to circumvent the TrustedInstaller question is how:
    1. right click on wmplayer and select Properties > Security > advanced > owner > Edit > other users and groups.
    2. Enter your username and then click on check names.  Click OK.
    3. close the dialog boxes as he has requested.
    4. open again the properties and click Security.  Select your username from the list and click on edit.  From there, select full control.
    This should give you full control over the removal of the original file for WMP and easily allow you to copy the other files (x 86) programs.
    Please let me know how it goes for your problem.
  • computer lack of memory cannot display video

    When trying to download a computer video said under low memory will not display video

    It is fast and should be done first,

    http://support.Microsoft.com/mats/ie_performance_and_safety/

    Use disk cleanup,

    http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  • WMC on Xbox 360 shows "video error: the files needed to display video are not installed...»

    Front when you use Windows 7 Xbox 360 everything has worked well.
    Upgrade to windows 8.  WMC can play programs recorded on PC, but when I try to play recorded shows with WMC of XBox 360, I get the following message

    "Video error: files needed to display video are not installed or not working not properly." "Please restart Media Center and or restart the computer.

    I don't have any codecs installed
    I tried regedit change suggested that for vista, does not work
    I tried the deactivation/activation of WMC on the PC, does not work
    Restart the PC does not work
    Restarting everything doesn't work

    had this error the other day, that it drove me crazy. You know what fixed it? Disable my firewall. For some reason, he decided to start blocking my xbox. I hope this helps.

  • VMware Workstation 7 display problem

    I'm updating VMware Workstation from 6 to 7, and upgrate VMware tools in a Windows 7 OS prompt, then the graphics card driver may not work. The driver is disabled by windows with error code 43.

    This occurs if you run your VM with an older version of hardware. Can you please virtual hardware upgrade of your VM?

    The possibility of using the virtual machine--> update or Version change-> compatibility select HW as 6.5 and 7.0

    Thank you.

Maybe you are looking for