HP Zeen: HP Zeen battery bulging / explosion

Similar Questions

• IP5 front panel

  I have an I Phone 5

  The façade seems to be projecting out of the side at the top

  In my view, the question in relation to a battery bulge

  I need a press takes the Home button and some presses repeat time

  Aswathyae wrote:

  I have an I Phone 5

  The façade seems to be projecting out of the side at the top

  In my view, the question in relation to a battery bulge

  I need a press takes the Home button and some presses repeat time

  Take it to the Apple store and watched it.

• HP Jet 7: Bulge battery HP Jet 7

  The back has recently jumped off my HP Jet 7, the cause being a battery that has swollen/bulged/developed to the point that the rear cannot be put back.  The case of the battery, now feels a bit stable, but common sense tells me not to prod it too!

  The device is now 4 months out of warranty, and a unit of £75, probably don't bother to pay for any kind of repair.

  Does anyone have any suggestions on either a house made of difficulty, or if HP are likely to be opened for helping me see is a potentially dangerous failure.

  Ideas received with gratitude. Thank you.

  Hello Simon,.

  A battery that has expanded also failed and is no longer usable.

  There are battery replacements now available on the web if you do a little research. They are relatively expensive, although I've never bought an and do not vouch for any online business. Order at your own discretion.

  Here is an example...

  PR-3258128 battery 795065-001 for Hp 7 5700 Stream 7 5700ng 7 5709 flow jet

  Page 15 of this manual explains how to remove the battery.

  HP Jet 7 Tablet Maintenance and Service Guide

• C510A Photosmart has different IP addresses for the Zeen Wi - Fi and another for the Wi - Fi printer

  I recently changed ISP and when I enter the new address of Wi - Fi that it connected to the Zeen but not the Wi - Fi printer, how can I change the correct IP address

  OK... more about the forum. Finally, to solve the problem by doing a factory reset and install again. All is well again... connected wireless!

• eStation C510a Zeen problems-broken Scan & Apps does not print

  I have 2 new problems with my zineb:

  1. we will not analyze on an SD card.  It will preview the analysis but the locks upwards when you press the scan button.

  2. Printing apps won't work.  They eject a blank sheet of paper.

  3. still no sign up with eFax.

  Anyone else having these problems?

  HP Support AGAIN to me to do a hard reset on the Zeen by power off and then turn on the power while holding down the two volume buttons.  This allowed again my zineb lose all settings, including the home screens.

  After the reset of long-term, zineb on SD card scan works now and print now print correctly on paper.

  eFax still does not work.

• Zeen Tablet lights. Also, is there a useful manual really knew this thing?

  Anyone know if there is a manual, really useful for this tablet - especially with regard to troubleshooting problems?  Mine went out and won't turn back on.  I tried the button on the side, berthing, sailing, berthing.  I really think that HP dropped its customers with this product.  It is really hard to use.

  Hi dpkehres,

  Follow the steps outlined in the document below.

  The eStation, HP Zeen is Unresponsive, Blank or does not turn on

  Manuals for HP Photosmart all-in-One Printer - C510a eStation

• Error with eStation Zeen - no scan for networks

  I have problems with the Zeen on our station.  We stopped using for a few weeks while moving around our headquarters, and now the Zeen gives the error message "Unable to scan for networks" as soon as I try to turn on the wireless Zeen.

  We also have a new router, so I don't know if they are related.

  I tried a full reset to factory specifications, but as soon as it comes to the installation of the network I get the message "unable to scan for networks."

  My PC is a laptop HP with Windows 7 Home Premium x 64

  Printer is a C510a

  I am trying to connect wireless.  The printer works when it is connected via a usb cable.

  Firmware version is ZEP1CN1130AR (2.2) (113110)

  The blue light on the printer wireless flashes.  However, as soon as I get to the installation of zineb and try to turn on the wireless zineb, I get the same error message.

  I found another thread with this exact error message, with no responses.  I found a bit on connectivity issues of zineb/printer, which I had at some point, but this isn't really the issue here.

  No chance, it's hardware related?  More troubleshooting ideas?

  Thank you!
  Ian

  Everything still works for you?  I hope so!  If the problem does not return, please check accept as Solution to help others with this problem.  If this isn't the case, I can't wait to know if Airprint works even when the Zeen is not.

• can anyone help me find an app for the Zeen which has just the time and date? Don't want to google.

  I don't know how to use the apps since all I found is on android, but apparently the Zeen is not compatible with the android apps.  I have google calendar, but it doesn't work and want to only the time and date is displayed.  I followed all the directions for adding applications, but they do not work or I can't understand them.

  Salvation of theeagles,

  The Zeen is unable to access the Android Market, but it's an Android device.  There is a market for this called SlideME, and you should have the icon for it in your apps section.  I have a station also, and I'm just a normal clock on mine.

  Here is a link to SlideME, if you want to see what applications are available: http://slideme.org/

• travel with the zeen/find a new WiFi connection somewhere away from home

  I have to be near my printer (within my wireless signal) to use the Zeen?  I will be going and I don't know where or how to get the zeen to find and block in another of my house WiFi signal. I went to a place that has a locked wireless signal and went somewhere (library) that should have have an open signal. I couldn't figure out how or where to enter the code for the House with the locked wireless.

  Help is so appreciated. So I want to take the zeen for tips internet while he's on vacation but impossible if it won't work not independent of the printer. The printer just can't go... it's too big for my suitcase

  REF = HPc510a, removable zineb

  Hi imtad,

  You can take the Zeen, all you have to do is of the home screen:

  1. Click on the menu button (the four lines per home icon).
  2. Go into settings.
  3. Go wireless.
  4. Select the network to which you want to connect at the bottom of the screen.
  5. If a password is required, you will be asked to enter.
  6. At the top of the menu, the Zeen Wi - Fi wireless, it must be said 'Connected' if all is successful.

• The ZEEN is an error message that it is not moored throughout the entire upward and I'm stuck.

  During the implementation (by choosing the time zone) the ZEEN displays an error message "ZEEN released" and that it must be anchored to complete the installation. When I disconnect him and reconnect it, she chimes off & on and then goes back to the time zone screen and return to the error message "ZEEN" offline I'm in an infinite loop here, help. Thank you

  Hello VicV,

  If this loop is produced during the installation, you may just want to reset the Rhodia and allow him to re-setup with the base station. You can see how viewing the document at the link below.

  http://support.HP.com/us-en/document/c02539981

• HP Photosmart C510 - how to remove the history of navigation on the zeen?

  Hello.

  We have one of the new after HP (C510) with the zeen wireless.  I would like to delete the browsing history on the zeen showing what I looked and looked.

  Does anyone know how to do this?

  In the bottom menu bar go more then settings scroll down and you will find the history button to delete

• FlexUnit 4 assert failures have traces of battery "explosive."

  With FlexUnit 4 in Flash Builder 4 Beta Plugin, I created 1 suite with 1 class 1 default, lack of test method. When I ran, the failure of the assertion had a battery call 60 high methods. Is this a bug?
  
  The stack trace has several "async" methods, for example applyExplosivelyAsync(). This seems odd, because I use any async. Is this expected behavior?
  
  Robert
  
  Not yet updated test implementation method

  to flexunit.framework::Assert$.

  Fail() [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\fluint\FlexU nit1Lib\src\flexunit\framework\Assert.as:370]
  to WidgetTest / testWidget [C:\Users\robert.penner\Adobe Flash Builder)
  Plugin Beta 2\TestProject\src\WidgetTest.as:20]
  function /http://adobe.com/AS3/2006/builtin::apply()
  at flex.lang.reflect::Method/apply() [C:\Users\mlabriola\Documents\workspaces\net\digitalprim ates\opensource\flexunit\FlexUnit4\src\flex\lang\reflect\Method.as:124]
  to ReflectiveCallable / run ([C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\open source\flexunit\FlexUnit4\src\org\flexunit\runners\model\FrameworkMethod.as:214])
  at org.flexunit.runners.model::FrameworkMethod/applyExplosivelyAsync() [C:\Users\mlabriola\Do cuments\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runn ers\model\FrameworkMethod.as:121]
  at org.flexunit.runners.model::FrameworkMethod/invokeExplosivelyAsync() [C:\Users\mlabriola\D ocuments\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\run ners\model\FrameworkMethod.as:132]
  at org.flexunit.internals.runners.statements::InvokeMethod/evaluate() [C:\Users\mlabriola\Doc uments\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\inter nals\runners\statements\InvokeMethod.as:52]
  at org.flexunit.internals.runners.statements::StackAndFrameManagement/evaluate() [C:\Users\ml abriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\fle xunit\internals\runners\statements\StackAndFrameManagement.as:94]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.token::AsyncTestToken/sendResult() [C:\Users\mlabriola\Documents\workspaces\n et\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\token\AsyncTestToken.as: 70]
  at org.flexunit.internals.runners.statements::AsyncStatementBase/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\AsyncStatementBase.as:44]
  at org.flexunit.internals.runners.statements::StatementSequencer/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\StatementSequencer.as:103]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:86]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.runners::BlockFlexUnit4ClassRunner/runChild() [C:\Users\mlabriola\Documents\w orkspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runners\Block FlexUnit4ClassRunner.as:104]
  at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep() [C:\Users\mlabriola\Doc uments\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\inter nals\runners\ChildRunnerSequencer.as:49]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.token::AsyncTestToken/sendResult() [C:\Users\mlabriola\Documents\workspaces\n et\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\token\AsyncTestToken.as: 70]
  at org.flexunit.internals.runners.statements::AsyncStatementBase/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\AsyncStatementBase.as:44]
  at org.flexunit.internals.runners.statements::StatementSequencer/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\StatementSequencer.as:103]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:86]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.runners::ParentRunner/run() [C:\Users\mlabriola\Documents\workspaces\net\digi talprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runners\ParentRunner.as:315]
  at org.flexunit.runners::Suite/runChild() [C:\Users\mlabriola\Documents\workspaces\net\digita lprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runners\Suite.as:59]
  at org.flexunit.internals.runners::ChildRunnerSequencer/executeStep() [C:\Users\mlabriola\Doc uments\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\inter nals\runners\ChildRunnerSequencer.as:49]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.token::AsyncTestToken/sendResult() [C:\Users\mlabriola\Documents\workspaces\n et\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\token\AsyncTestToken.as: 70]
  at org.flexunit.internals.runners.statements::AsyncStatementBase/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\AsyncStatementBase.as:44]
  at org.flexunit.internals.runners.statements::StatementSequencer/sendComplete() [C:\Users\mla briola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flex unit\internals\runners\statements\StatementSequencer.as:103]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:86]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.internals.runners.statements::StatementSequencer/executeStep() [C:\Users\mlab riola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexu nit\internals\runners\statements\StatementSequencer.as:62]
  at org.flexunit.internals.runners.statements::StatementSequencer/handleChildExecuteComplete () [C:\Users\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit 4\src\org\flexunit\internals\runners\statements\StatementSequencer.as:82]
  at org.flexunit.internals.runners.statements::StatementSequencer/evaluate() [C:\Users\mlabrio la\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit \internals\runners\statements\StatementSequencer.as:68]
  at org.flexunit.runners::ParentRunner/run() [C:\Users\mlabriola\Documents\workspaces\net\digi talprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runners\ParentRunner.as:315]
  at org.flexunit.runner::FlexUnitCore/beginRunnerExecution() [C:\Users\mlabriola\Documents\wor kspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\runner\FlexUnit Core.as:177]
  at org.flexunit.token::AsyncListenersToken/sendReady() [C:\Users\mlabriola\Documents\workspac es\net\digitalprimates\opensource\flexunit\FlexUnit4\src\org\flexunit\token\AsyncListeners Token.as:59]
  at org.flexunit.runner.notification.async::AsyncListenerWatcher/sendReadyNotification() [C:\U sers\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\ org\flexunit\runner\notification\async\AsyncListenerWatcher.as:87]
  at org.flexunit.runner.notification.async::AsyncListenerWatcher/handleListenerReady() [C:\Use rs\mlabriola\Documents\workspaces\net\digitalprimates\opensource\flexunit\FlexUnit4\src\or g\flexunit\runner\notification\async\AsyncListenerWatcher.as:97]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flexunit.flexui::FlexUnit4TestRunner/handleConnect() [C:\work\flex\ide_builder\com.adobe.f lexbuilder.flexunit\flexunitframework\src\flexunit\flexui\FlexUnit4TestRunner.as:296]
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at flash.net::XMLSocket/reflectEvent()

  FU4 and FU1 support as well as theories and set tests are all runners actually pluggable already. Furthermore, the community has written pluggable runners that support FUnit, structured log testing and a few other test infrastructure that will be available soon (projects not under my control, so I don't think I have to comment immediately). Effectively, this means that FU4 is responsible to identify a test but that it then passes execution to a separate category.

  To be a plug-in, simply implement the 1 interface (org.flexunit.runner.IRunner) and be able to provide the descriptions and the necessary handshakes. You specify that you want to use a runner plugable through RunWith metadata

  You could write your own to eliminate part of the stacktrace charges absolutely (but there will be some while FU4 introspects classes and numbers that you plan to run in a separate rider).

  Mike

• I can't get the Zeen to work properly.

  I have the HP Photosmart C510 e station.

  Windows 7 64 bit

  Connection problem... There was a problem connecting to the internet. Please try again.

  I can't make it work even if it is in fact connected. I can't find a market is there a? The weather on the first page won't let me change my code zip... same error... not connected. Help, please?

  For the problem of weather I would try to remove all the other of the city leaving only your city and then if you want to add more add ensuring your city is the first figure.

  Touch the weather on the home screen of change.

  -Click on edit

  -Use the sign less opposite the name of each city to remove

  -leave your city to make it first

  -Add any other city you want and then your city should appear on the home screen.

• Zineb battery, C510A

  I received a three-year-old C510a all-in-one with a "Zineb" connected tablets. The zitoun battery recharge, and online help for the printer says that I have to get a new Zeen. This looks like a costly proposal. Is there a way of removing and replacing battery of zineb present instead? Or should I just ignore the Zeen and pretend that there is not?

  Hello mikefield and welcome to the Forums of HP.

  I understand that you are having problems with the battery in your zeen. Unfortunately there is no option to remove and replace the battery in the zeen. The best option for your situation could be replacing the zeen.

  You can find more information on HP replacement parts:

  HP parts store.

  1-800-227-8164.

  Monday-Friday 07:00 - 7:00 pm CST.

  Saturday 08:00 to 7:00 pm CST.

  Please let me know if I can be more useful. Thanks for posting on the HP Forums.

• iPhone battery 5 swollen

  Noticed that there is a bulge on the screen of my iPhone the day before.

  I visited the Apple store in Waterloo today to help, but I got is the recommendation to pay for a new iPhone because I bought my phone more than 3 years ago.

  Apple "suggests" pay me $349 to get another iPhone 5.

  This battery problem happened completely out of my control, and Apple doesn't want to take any responsibility for its device.

  I use it for awhile until I have received a new device from any other supplier but apple.

  Hope that it never explodes in my pocket or on my face until I'm another phone.

  Someone else has the same problem?

  3 years old batteries fail and sometimes swell up. Apple is not making batteries or design them and you are at least 1 year of your warranty. Apple offered to you by a price off-warranty replacement for your iPhone or you can buy a new one. If you decide to buy from another provider and get it in writing that they have a lifetime warranty on the blocking of the lithium-polymer battery and only buy from a vendor who will give you that. So, let us know how your life becomes on not to use a cell phone.