HP10 1901 Tablet: Tablet 10 1901 hp stops immediately after the start, despite the load fully


My hp 10 Tablet has less than two years, and I don't use much.  The problem started with the volume suddenly down to zero out of control, and even if I press the volume up button, the volume is just down once again, when I let the button.  And then the Tablet has started to close automatically, even when it has a lot of power left, as more than 50%.  Now, even if I have fully charged, when I press the power, immediately after the start, it says, 'stop' and he just stops.  I try to turn it on again, and the same story is repeated.  I'm just fet upward.  What is a mechanical problem or a software problem?  I don't understand.  Please help me.

Hello and welcome to the HP support community!

It is difficult on this side of the screen of remote diagnosis your problems!

You should try to eliminate the causes of the problem.  Only thing we recommend is to first try a Factory Reset.  It recharges a clean copy of the OS.  If she solves problems, then you're done!

If problems persist or get worse, then it is probably related to the material.  Damaged the volume button, USB port, due to lack of battery, etc.

Perform a factory reset on your tablet.


Tags: HP Tablets

Similar Questions

  • MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

    The computer stops immediately after the start, repeatedly or a few minutes after have managed to start it. The error log showed two evenys:

    (1) the service Acquisition of Image Windows (WIA) suspended at startup; (2) the server {81ED811 A1F4E726-8CF1 - 11 D 1-BF92-00600} is not registered with DCOM within the required time.  After restarting the computer, and after installing all of the updates, I installed the last printer; I unplugged the printer and the computer booted immediately!  Does anyone have suggestions, and if I have to update the drivers (hp Laser jet 5 p & hp scanjet 5370C;) How? Please help, frustration to a max; Thank you very much; HeinrichDS


    Recommendation of the Palcouk of sense what is the operating system and is worth a try.  If you're still having problems, then you need to talk to specialists in XP (because it is a Forum for Vista).  In this case, please transfer your question in the Forums of XP to http://social.answers.microsoft.com/Forums/en-US/category/windowsxp where the XP experts will be happy to help you.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Newly installed adobe reader stops immediately after the opening

    I just installed Adobe Reader (on a Windows 7 computer), but I tried to open it it starts and stops immediately. I have another PDF generator that came with the computer (Stat Nova PDF) which could interfere with Adobe reader.

    Works with Adobe reader installed or PDF software.

    Is there a setting to make Adobe default PDF reader?

    I can't risk to uninstall the software original PDF (Stat Nova PDF), it must be for a rush job and can't risk have no functional PDF reader at all.

    Thanks for your help

    First thing to try: go to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader and Eula.exe execution, and then click I accept.

  • iPhoto will stop immediately after launch

    My iPhoto stops immediately after the launch.  It seems that if I can still import the photos but the app I cannot view or navigate the library, because it stops and gives me an error message.

    Help, please

    iPhoto v9 on 10.8.5?

    A lot of older versions of iPhoto 11 this meet right now:

    Huxly647 discovered this fix

    1 goto /Applications/iPhoto.app/Contents/Resources

    2 delete the files 'googlemap.html' and googlesearch.html

    IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

  • Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated. No difficulty to make it work?

    Firefox extension: 'TrueSuite 5.2.500.16' stopped working after the last update of firefox (30.0), although subject: said plugin activated.

    I tried to reset firefox and search for similar problems, unfortunately found nothing.

    It is also weird empty space before the address in the address bar

    other extensions and addons seems to work very well.

    Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to TrueSuite, you can use the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Then on the right, check the setting on the right side of TrueSuite.

    Any difference?

    Note to other readers: the original poster had to leave Firefox and start it again until it is actually entered into force.

  • HP Envy 15-j119so: Envy 15-j119so stops immediately after starting

    My 7 month specifications stops immediately after startup. Briefly, it shows the start screen with the message "to initiate the automatic repair" before to stop completely. The laptop is brand new and I have not experienced problems before today.

    Would it be a virus or a motherboard problem? In any case, if you can help, let me know!

    Thanks in advance.

    Sounds like a hard drive problem possible. Have you tested with the F2 System Diagnostics? Immediately after switching on at startup by pressing the ESC key. A menu opens where F2 is an option. Press F2.

    You are still under warranty. HP support a call.

    If you live in the United States / CA, coordinated HP here.

  • Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

    My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

    I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

    This problem happened in video mode.

    I hope that there is a setting I have to toggle to make this objective work in Live View mode?

    Thank you


    I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

    The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

    The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

    So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

    I would still recommend this camera to a friend.

  • Asus Vivo tab RT hardware keyboard stopped working after the default reset and updates.

    Separated from this thread.

    My Asus Vivo tab RT after the default reset and updates my physical keyboard has stopped working.

    but I can use the mouse by using the touchpad the touchpad works a few keys on the keyboard as...

    music, fn, FN + brightness work. but the letter keys are not. When I am pressing on the keys, they make sounds, but does not...!

    Hi Srikanth,

    I understand that you can not use the alphabetic keys on your tablet.

    To better understand the issue, please send us the following information:

    1. You are able to use the external keyboard with the laptop?

    2. Is this problem specific to certain keys or all alphabetic keys have similar problem?

    This problem could occur if the filter key is enabled, please disable filter keys and see if the problem is fix.

    Follow these steps to disable the filter key

    1. Press the Windows key + R.
    2. Type of control
    3. Click ease of access.
    4. Click on change your keyboard works.
    5. Uncheck the box that says Activate FilterKeys.
    6. Click Ok.

    You can also see the following article for some common troubleshooting steps that can be performed on Windows 8.


    Hope this helps, get back to us if you need further assistance for Windows.

  • Illustrator CC has stopped working (after the last update)...


    I get the following message "Illustrator CC has stopped working... "when I now try to run the program. It was only after the new update of the Illustrator. I uninstalled Wacom Cintiq HD 13 from the PC. Has no change.

    Any help please? Thank you.


    Windows 8, Version 6.3 (Build 9600)

    Name of the failing application: Illustrator.exe, version:, time stamp: 0x54247b91

    Name of the failed module: Illustrator.exe, version:, time stamp: 0x54247b91

    Exception code: 0xc0000005

    Offset: 0x000000000013920a

    Process ID vulnerabilities: 0x3d8

    Start time of application vulnerabilities: 0x01cfe32da5a29313

    The failing application path: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

    Path of the failing module: C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\Illustrator.exe

    Report ID: e519a0fe-4f20-11e4-82a4-74d435809d3b

    Faulting full name of the package:

    Hi Sumit,

    Thanks for your quick response.

    No I have not any suitcase software installed. Does jogging but my memory and I got some trial graphic clever plug-ins installed, which had expired recently.

    Uninstalling all these now let Illustrator launch. Therefore, it seems to work.

    I'll install the Wacom tablet program later. I suspect that it will be fine.

    Thank you.

  • Time travel has stopped working after the upgrade to watch OS 3

    Hi all
    Since I upgraded to 3 watch OS stopped working time travel feature - by turning the digital Crown now does nothing.  The digital Crown works fine on the other screens, for example the notifications, but not on the dial of the watch itself.  I did a cycle power, but to no avail. Does anyone have information?

    Thank you

    Come on, show on your iPhone in the app, then check the clock settings. There is an option to turn on or off; travel in time after the update to watch OS 3, it has been disabled by default for me.

  • Video stops playing after the transition

    I want to embed a video in a Keynote slide so that the video starts to play just after the slide in video. When I play the presentation and advance to the slide video, it plays for 1 second, then stops and the presentation falls back in design mode. I tried different video clips and they all do the same thing.

    The video is a MP4. I can integrate the same video into the Powerpoint presentation and it plays OK.

  • Stops automatically after the last El Cap update


    I use a middle Tower Mac Pro 2012 (Nehalem). 3.2 Ghz Quad core, 1 TB hdd, 8 GB ram DDR3, ATI graphic card 1 GB GDDR3 ram

    Just updated to the latest version of El Capitan (10.11.5, I think). Directly after the update has been completed and the obligatory restarted, the splash screen would come to the top. The progress bar should get about half way (probably 15 seconds) and then the machine just turns off. When you turn on it starts where it stopped, then 15 seconds later it turns off again.

    I tried to get in safe mode - turns off until something happens

    I tried the (cmd, opt, p, r) and it should restart as expected but then start from the beginning progress bar. As before judgment.

    AND if this can help: just before rebooting, I got an unknown error while trying to open iTunes (which was working fine the day before) - he asked me to uninstall and reinstall iTunes. The error had a number, but I don't remember it.

    Any ideas?

    -Try to reset memory NVRAM/PRAM and SMC

    MacIntel: Reset of the controller (SMC) system management


    PRAM and NVRAM


    -Try to start safe mode

    OS x: what is Safe Boot, Safe Mode?


    You said "I tried down mode switches secure until something happens" try to press and hold the Power button until the is off Mac and then try safe mode

    -Start to recovery and repair the startup disk

    OS X: on OS X Recovery - Apple Support


    -If it is repairable reinstall the OSX

    How to reinstall OS X on your Mac - Apple Support


    -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

    Format the boot disk and then do a fresh install of Mac OS x

  • HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

    I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

    Hello @MAlex_B,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

    Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

    Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Satellite L855 and Win8.1 - Touchpad stops working after the login window

    New laptop running windows 8.1 Touchpad works for about 30 seconds after windows starts and then stops. I have tried downloading drivers the most recent of the Toshiba site, but it does not solve the problem. Tried the function keys of the touchpad, but it's not the question. Called Toshiba support and they suggest to send it in for a factory reset.

    I have also a problem with AMD graphics will split after that computer screen goes into sleep state. Downloaded and installed drivers more recent for it on the advice of Tech support, but not fixed, or the other.

    I'm a little worried because a research shows these two problems are not uncommon and IV ' e spent a lot of time to copy data and install the software, don't want to lose him and wasting time waiting for factory reset if I need to return ot.

    Anyone have any ideas?

    Factory reset is the best way to solve this problem, but you have upgraded your machine following the instructions step by step http://www.toshiba.eu/innovation/generic/windows8_1-message/?

  • Pavillion g6: my laptop audio stop working after the installation of window 10

    After the installation of window 10 my speakers to codec audio idt high definition stop working completely.please help me out of the this.thanks

    Try to update the drivers via windows update or hp support assistant. Headphones work?

Maybe you are looking for