Hp15-ac026tx: shutdown hp15 ac026tx problem

Similar Questions

• Keys brightness HP15-R014TX problems

  Hello.. I m using HP15 - portable R014tx. I am currently working on Windows 8.1 (64-bit).

  I don't know, but suddenly, somehow my brightness key (F2 & F3) have stopped working.

  Please help ASAP!

  Hey @Akshay07 ,

  Welcome to the HP Forums!

  I understand that the luminosity functions have stopped working on your laptop.

  Please make sure that the drivers for your graphics card are up-to-date.

  You can download drivers Intel HD 4000 here: driver Intel graphics high definition (HD).

  You can download the card NVIDIA GeForce 820 M drivers here: 344.11 GeForce graphics driver.

  I would like to know if it works for you.

• Shutdown producer/consumer problem

  Hello world

  I need to control one position with a controller of axes and save travel time of the position between two points. I use a producer/consumer model, but the stop key does not complete the program, the second loop is still running. I thought that hitting the stop button would create an error and end the while loop.

  Do you know where is the problem?

  Thank you for your help

  Your VI works as expected. Get rid of the misused sequence frames.

  The last image the question because the queue is destroyed if the two loops have completed. As the loop of consumer requires the queue to be destroyed to finish, this will never happen.

  Norbert

• Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available.

  I get the above message. This started after I installed Vista service pack 2. I will work and a blue screen appears in the lower part is States something about dumping. Then it restarts and the above message appears. I can't stop the computer, the display shows "shutting down" but it goes for hours without stopping in fact.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Aspire E1 - 572G - 10 Windows shutdown and restart problems

  Hello!

  I bought this laptop a while ago, like almost 2 years, and probably more. It was powerful enough at the time, and I was very happy with it. So when Windows 10 came out I've updated, everything went well, but I made a mistake.

  I used a program that automatically updated the drivers and downloaded one which was not intended for my PC. Since then my Acer will be not completely closed (the screen goes black, but the lights switched on, the drive keeps spinning) also restarts fairly slow with a large clicking noise as it stops the HARD drive and that shouldn't happen restarts in my possession. Although any of this happened if I play for awhile, watch the videos and do things.

  I tried reinstalling every driver, reinstallation of Windows, every difficulty on the internet that I could find, but all this would not help.

  I even replaced my with a SSD HARD drive, reinstalled completely windows on it, so new a own, bought a Bay optical caddy so I can replace my DVD with the TOSHIBA HDD Recorder. Even in that case it wouldn't work. Reinstalled driver BIOS, still nothing.

  I don't know what to try more, I really need your help, guys!

  I guess you Haswell - of the month last most people use the Windows driver 8.1 Intel Management Engine Interface as a workaround for the sleep/shot, stopping/blocking issue in Windows 10.

  http://www.Acer.com/AC/en/us/content/drivers

• Need Drivers VGA HP15-R043TU

  Product name: - HP15 - R043TU problem:-J' have Windows 7 Ultimate 32 Bit operating system. But the drivers VGA HP15-R043TU are not compatible with my operating system. I don't want to install Windows 7 64 Bit OS. I hope that HP will focus on this problem and will update the drivers too. If anyone knows the solution to this problem please let me know. Thank you, Jean Philippe

  Hello:

  Please see if this driver works...

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?DwnldID=23884&lang=eng&ProdId=3719

• Windows 7 power indicator problem

  Hello... I have a problem with my windows 7, whenever I use it for a long time and then it off via the start menu, the power light is still on and I hear again the fan running despite the display saying it is turned off and then blacj. In order to close it completely, I need to hold the power button and I know it will be bad for my laptop if I still force closure with button / stop. Curiously, it doesn't happen when I use my laptop for a long time, perhaps more than an hour... But if I use my laptop for a few minutes, there is no problem with power indicator. Can someone help me with this please?

  P.S. I am a newbie in this then I would be happy if you could explain it in the easy way

  Hello

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run troubleshooting of power utility and check.
  Reference:
  Open the troubleshooter of power

  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  It checks things like settings timeout of your computer, which determines how long the computer waits before turning off the display or enter the mode 'sleep'. These settings can help you save energy and extend the life of the battery in your computer.

  If this does not help, use method 2.

  Method 2:
  Create a new power plan and check the issue.
  Reference:
  Change, create, or delete a power plan (scheme)

  http://Windows.Microsoft.com/en-us/Windows/change-create-delete-power-plan-scheme#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Monitor intermittently do not wake from sleep mode

  I have a new Pavilion 500 - 205t Windows 7 Desktop (two weeks).  Two days earlier, after the computer is in mode 'sleep', the computer would wake up, but the screen would not.  I contacted HP Support and they said not to put the computer in mode 'sleep', but to turn it off instead.  They said that the computer could accumulate a static charge which could prevent the monitor to wake up from sleep mode.  Their solution was to force a shutdown by pressing the power switch, unplug at the back of the Tower, by pressing the power switch for 20 seconds, plug everything back in and then turn on the computer.  The monitor worked correctly then wake up from sleep mode.  For the last two days, the computer would wake properly from sleep mode.  Today, the same thing happens again.  This time, I turned off the computer and then he turned back to (without unplugging everything) and the monitor worked correctly.

  Here's my question:

  Is it really a static problem? (It has been cold and dry here for several weeks and static is high)  Or I have a hardware problem or software that needs to be fixed?  Thank you for your time.

  I think I found the solution to this problem for my computer.  I changed the settings for sleep or sleep 'Hybrid' or 'Hibernate' is allowed.  Since then, I have not experienced the problem.  I also changed what does the power button, so that when I press the power button, the computer shuts down normally.  This prevents a "forced" shutdown if the problem happens again.

  Thanks again Bill, for your time.  I mark this problem is resolved.

• Compac Presario CQ57-229WM: failure of Compac Presario CQ57-229WM Memory Module

  Compac Presario CQ57-229WM w / Windows 7

  I get the following text "Windows has recovered from an unexpected shutdown. A problem caused Windows to stop working correctly. Windows will notify you if a solution is available. »

  Followed by a crash dump

  Verification of results in the readers:

  Drive hard test Passed

  HDD SMART Passed

  Module memory failed

  1 732 608 bytes of memory tested system OK

  Fault memory test

  Any help would be greatly appreciated.

  One or maybe two sticks of memory failed. If it's not very common to have two fail - it wouldn't be a bad idea to replace both if you can afford it. You could also spend 4 GB of the 2 GB, you have now.

  Crucial is always a reliable source of memory and they have single sticks or a set. Click on 'Show memory more compatible upgrades' under the memory listed to see the simple sticks and sets:

  http://www.crucial.com/USA/en/compatible-upgrade-for/HP-Compaq/Presario-cq57-229wm

  You can remove a memory stick at a time and run the test to determine if one or both is a failure. Your interview Guide & shows how remove and replace memory:

  http://support.HP.com/us-en/product/Compaq-Presario-CQ57-200-notebook-PC-series/5091489/model/5111956/manuals?lang=en&cc=us

• What can I do to speed up my slow sometimes Tablet? (need for response to mark as answer!)

  I'm fighting a few questions on my tablet pc with help on this site and you can see in my questions - including the 10 page long end topic Nows.

  But that has been resolved with the great help of 4 of you on my Question 12 END NOWS each logout or restart and I think that I helped a little, by maximizing my 1.5 GB RAM - what is available for this Motion Computing LE1600 tablet to http://www.motioncomputing.com/support/driver_download.asp. I even did a clean install recently with the help and reinstall all my programs and update each of them and my drivers and software mfg. I immediately installed and activated Security Essentials and I do very little about internet and only go to Facebook, this site, my Bank, Tech Republic, and a radio station. But I wanted this new question here because it seems like a slightly different problem, but it might be somewhat related.

  How can I ensure that the material in this tablet is working properly and know what are the causes that it stops and starts too slowly? Even though my tablet now seems to work better as I remember even back to when he was 5 or 6 nine, always a problem that seems quite intermittent. Sometimes, when I do a reboot, after that it goes to the Windows XP screen saying once your settings, it will just sit there for 10 or 20 minutes. After a while, I drop and force a shutdown with power switch of the tablet. But at other times, my tablet is going to close or restart very decently, if not a little too slowly. , But sometimes it will stop well on its own!

  So, what can I do? I really don't want to send support staff to the Motion Computing and hope they can understand that. Can someone out there help me dig into this question that I don't know. I'm decently motivated and I think I'm sufficiently talented and somewhat knowledgeable on the technical aspects that would be needed. I don't really have friends 'tech' or the partners I can ask or want to ask for help on this.

  It was reported from a reliable source that the weather plugin for Yahoo! Messenger may cause performance - especially during logout, shutdown and restart problems.

  Temporarily disable Yahoo! Messenger and then check your performance and you'll know if that's all.

• PC don't re - not start proberly

  I installed 10 windows on my Hp computer and now my computer restarts correctly, and I would like to know how to fix grace when it reboots it just goes to a blank screen

  Hello again @Jasen734,

  I'm glad to hear that your computer is now restart. I have a solution for you to try to resolve the shutdown problem. I would like to see again you and follow the steps outlined in the document of Support ASKVG: difficulty Windows 8 and 8.1 reboot and shutdown by hybrid 'Shutdown' deactivation function problems as it has proved to be successful when the fixing of many problems of Windows 8 and 8.1 reboot and shutdown.

  Please re-post if you still need additional support. Thanks for posting on the HP Forums. Have a great day!

• HP2000: HP 2000 display black but the screen showing all

  my laptop is hp 2000. its having problem with the display. While power on nothing, we can see on the screen, but other fine work (fan, caps lock, shift, wifi light, etc.) after that I can see Variant simplified on screen. I found any display on screen, but we cannot see. If we put a light tourch on screen, we can see the content. After I pass my turn and turn again and close the lid and display suddenly open came as usual. Once again, if it goes on standby or shutdown even mode problem will rise again. whenever I have to close the lid and open at the beginning... someone tell what is the problem on this... How can I solve this problem.

  @KRISHTVM1,

  Hello and thanks for the display on the HP support forums.  Please post back with the complete model and the product number of your laptop.  This will help me get you the link of your interview guide.

  The problem you are experiencing is cable going to the screen or the inverter.  It has come loose or broke.

  Here is a link to help you with that.

  Computers how can laptops HP - I find my model number or product number?

  Please post when you have a chance.  Thanks again for the post and have a nice day

• My computer not stop using the software more, why?

  I have dell XPS 410 to operate using Windows Vista, but it will not stop it using only the software. What can I do? * E-mail address is removed from the privacy *

  Hello

  Please take a look in the thread below for a possible solution:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/Windows-Vista-shutdown-and-hibernation-problems/1cdb34e4-6ccd-4F4B-942D-9ed70e99129b

• Laptop shuts down without warning

  Hello

  I have a laptop - HP Pavilion Sleekbook 15-b000ej with Windows 8.

  Recently, she stops without warning, but only when working on the battery. Although I guess the battery is old and I need to get a new - I don't understand, is why the laptop stops instead of going to hibernation. I checked the power settings. It is supposed to never closed, but go into hibernation, but it never does.

  So is it the battery or something else?

  Thank you.

  Hello

  I would like to know some information about the problem so that we can help you better.

  You made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  I also know that the inconvenience that you are experiencing due to shutdown of Windows problem. I will definitely help you.

  This problem may occur because of corrupted or incorrect power settings.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run Troubleshooter of power and control. Please follow these steps:

  a. press Windows + C keys together, and then click Search.
  b. type Troubleshooting in the search box and click on it in the search results.
  c. click on "display all" and then click "Power".
  d. click on 'Next' and follow the on-screen instructions.

  If this does not help, use method 2.

  Method 2:
  Please see suggestions of Kate Li and marked as answer kelvin_hsu, Microsoft of contingent personnel, Moderator on January 27, 2014.
  https://social.technet.Microsoft.com/forums/Windows/en-us/3149cdae-21ee-4B2A-9321-5d4841e1c24b/Windows-shuts-down-instead-of-hibernation?Forum=w8itprogeneral

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• HP15-ac122tui3-5e: problem setting of hearing headphones

  I newly buy hp15-ac122tui3-5, but on this notebook during connect headset wasn't working/hearing but its has been through the speaker laptop pls suggest me the adjustment of the helmet. I already check the internal sound setting but not find any option to play option .no headset mute the portable speaker and play the headphones

  Hi @sk29,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with the headphones connection. I'll be happy to help you.

  Please post the OS used on your computer. Check out the following, if you need assistance with this information.
  Is the Version of Windows on my computer 32-bit or 64-bit?

  What tap connect is the helmet have? How many black circles?

  Will you please get back to me with the information above, so I can help you better.