HP15-ac122tui3-5e: problem setting of hearing headphones

I newly buy hp15-ac122tui3-5, but on this notebook during connect headset wasn't working/hearing but its has been through the speaker laptop pls suggest me the adjustment of the helmet. I already check the internal sound setting but not find any option to play option .no headset mute the portable speaker and play the headphones

Hi @sk29,

Please become a member of the HP's Support Forums. I understand that you have a problem with the headphones connection. I'll be happy to help you.

Please post the OS used on your computer. Check out the following, if you need assistance with this information.
Is the Version of Windows on my computer 32-bit or 64-bit?

What tap connect is the helmet have? How many black circles?

Will you please get back to me with the information above, so I can help you better.

Tags: Notebooks

Similar Questions

  • Problem Set - up blackBerry Smartphones Email

    Hey guys,.

    I'm having a problem setting up my accounts e-mail and access to internet on my 8830 Verizon Wireless.  Sorry I'm kinda a n00b this is my first blackberry.  Thus, everytime I try to put something it says I have to create a blackberry account which is fine and dandy, but it won't let me because it says that my PIN is already activated, now I buy this phone.  How can I do accept my new account and letme registry?

    I will also upgrade the operating system on it (even if my thinkpad comes to die what numbers) which version of desktop software works best?

    Good so I called Verizon and they were confused at first but after being on the phone for a while with a very useful technology, they understood him out and set up my email for me.  It turns out that I have to use the user name that is already registered on the phone, so the guy that I bought username.  They wiped out its old email (I hope, you just don't lose all your emails wherever you are) accounts and set mine to and let me change the password.  Everything works now, just waiting to get my thinkpad broke stupid of the STI in order to update and sync with my outlook calendar.

  • Problem setting transition duration first pro cs4. Is this a bug?

    Hello world

    I have made a project of first pro cs4 and I'm having problems setting the duration of transitions between clips. I have my default transion set to cross dissolve them and 15 frames in length. When I try to lengthen, it seems that first makes two transitions in instead of a longer one. So, if for example I got a clip with a dip to black when I extend more than 15 default images to say 30 images I get two separate transitions one after the other instead of a long. I know it's difficult to understand so I downloaded the video on youtube. If fast forward you to the minute 01:20, you will see the latest bland given away with a dip to black transition and the you'll be right flash a bit after the last light disappears. I hope someone can help me solve this problem, as I'm completaly lost. Thank you :-)

    Work waaay too hard at this, dude.  Just use the default chained.  It gives you good fade to the top using all 24 images, no adjustment necessary.

  • I have Annoying problem, I can hear the sound of the headphones and portable speakers...?

    I recently bought (Dell inspiron 3537), windows 7 64-bit (6.1 build 7601), more info on first image,.

    http://i.imgur.com/SBEezVe.PNG

    but I have a problem when I have a headphones connection to the laptop... the headset works well, BUT I can hear the sound of the headphones and computer speakers posing problem, I want to hear the sound of the headphones only, see the shot of images >

    http://i.imgur.com/lpkKxMp.PNG
    http://i.imgur.com/MXmP6FL.PNG
    http://i.imgur.com/WCpTZCI.PNG
    http://i.imgur.com/ikDKvr1.PNG
    http://i.imgur.com/UIYDAVD.PNG
    http://i.imgur.com/nsrreYQ.PNG

    can you help me please?

    1. open the Device Manager and right click on Realtek High Definition Audio.

    2 Select this option to "Update driver software".

    3. click on "Browse my computer for driver software".

    4. click on "Let Me pick from a list of drivers on my computer".

    5. put the "Show compatible hardware" check box if not already checked.

    6. in the list of devices, click on 'High Definition Audio'.

    7, click on "next".

    8. in the update driver warning box, click 'Yes' (the driver).

    Install the native driver. Immediately test the headphones/speakers.

    If the list of drivers to step 6 do not include "High Definition Audio" then please use the Windows system restore. It is quite safe to use because if you don't like the results, you can undo the restore operation.

  • Problem setting up family sharing

    I just bought my daughter an iPod touch and I would like to add to the family sharing. I created an email for it in hotmail. Checked his age avec.50 at Microsoft. My problem is when I click on iCloud and click on the family, it is said that an invitation is sent. If I connect in its my iPhone email account and click on the email asking me to 'Get Started '.

    Once there he asks me to accept what I do. But then it says, invalid Invitation. He said: I'm already part of this family, go back to iCloud defining and tap on the family to review the settings of your families.

    Help!

    Thank you

    Marc

    Hi Marc,

    Thank you for your participation in the communities of Support from Apple.

    Looks like you're accepting the family share the invitation sent to the e-mail address of your daughter with your iPhone. Accept the invitation will be implemented a family sharing on the device you are in time, then try the same steps on your daughter touch iPod should work.

    For reference, here's more information to set up the sharing of the family:

    Join a family group

    You can accept or decline an invitation to join a family of your device:

    • On your iPhone, iPad or iPod touch, go to settings > iCloud > Invitations.
    • On your Mac, choose Apple menu > System Preferences > iCloud > family to manage.
    • If the invitation is sent to your e-mail address, you can respond to the right of your e-mail address.

    To accept an invitation, follow the instructions on the screen. Here is what you will be asked to do so when you register:

    • Confirm your Apple ID and password.
    • Choose if you want to share your content and that Apple ID you want to share.
    • Choose if you want to share your location. If you agree, your location can be displayed on devices of members of the family find friends and Messages, and the location of your shared devices will also appear on devices of the family members to find my iPhone.

    If you cannot accept the invitation, see if someone else has joined a family with your Apple ID, or is sharing content purchased with your Apple ID. Don't forget, you can join only one family at a time, and you can only switch to another family group once a year.

    See you soon.

  • Problem setting up base appeal of the DLL (win32 API?) for the control of coherent laser Verdi-G

    I'm trying to set up a call to the DLL to control a coherent laser Verdi-G.

    I can't know the right way to set up calls. In the attached Demo.cpp, there is a function "RunTests". It's kinda my final goal. Functions send some commands to query the device. I'm going to need to send commands like this (along with several others, some of which take arguments... but I think I can understand that on mine)

    My problem is getting started. I can't even talk about the device. I tried a few different ways to set up the call to the DLL, but they have always will plant the computer. I don't know if I am missing a few parts such as the initialization of a method to speak via USB or other parts.

    I added my own .vi tries as well as some of the .c, the .cpp & the .h files associated provided with laser control software. I may have missed the relevant records; I'm happy to add them if someone sees a necessary file / referenced.

    Any help would be appreciated.

    Thanks for your time!

    Turns out I missed the included .vi which belongs to install them the package. I was looking directly on their CD.

    I would mark this closed if I saw a button for this?

  • LaserJet M1212nf: Problems setting up wireless printing

    I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

    It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

    Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

    (1) uninstall the current installation of the printer (USB).

    (2) on the printer itself, make sure that the settings > network settings are the default values.

    (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

    (4) when you are prompted, select "wireless."

    RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

    (5) try again once and this time select "Network Setup."

    RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

    If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

    (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

    I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

    I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

    Hello @SKYdiz,

    Welcome to the Forums of HP Support!

    I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

    Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

    All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

    Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

    Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

  • HP J3608 Fax problem: recipient cannot hear me when sending faxes using the HP Solution Center

    Hi all

    I have problems with our HP Officejet J3608. I have explored its functionality to send the fax using Solution Center HP AIO. So I opened a word file > press print to the fax > then a dialog box appears asking you for the recipient and all other info > I enter the number of the recipient fax and press send fax > then the fax includes the number and rings > the recipient responds by saying hello, "who is this?" > I said hi, "can I have a fax tone?" > the recipient says ' Hello? Hello?? "then drops the phone.

    Then I found that the recipient cannot hear us on our part, I tested it with other recipients. The recipient is on strong talk and when I lift the phone in the device, it is always to steal it. What is the problem here?

    Take note that this is not happening when we directly dial the telephone number of the device and feeding it with a printed version.

    Thank you very much and I hope someone answer my question. This will really mean a lot.

    Depending on the machine you send your fax to depends on how he responds. Most fax machines have no phone attachments, and the 'auto response' is a parameter that allows the printer to recognize the incoming faxes and receive them automatically. What you describe is the manual answer option, in which the recipient recognized the incoming fax and must manually answer.

    In this scenario, it will depend on the machine you are sending to and whether it can receive in this same way.

    Let me know!

  • Problem setting up printer on XP via WAN for 64 bit Vista machine. __

    I have a desktop computer XP with a HP Laserjet P1006 and a Canon MP 780 multifn connected by usb printers ink jet.

    I have a vista 64 laptop I set to print on both printers via WAN (to aid adding printers and worked without any problems).

    I recently moved and when I brought back online network, the HP printer works well, but I can't print in the Canon.

    I uninstalled the Canon software and reinstalled. I connected Canon printer to Vista computer in local mode and it prints fine.

    When I try to configure Canon printer in network mode, I click on "Add a printer" on the Vista computer, I am able to 'see' the Canon printer on my desktop and "select." I get the message: "the server for Canon printer does not have the printer driver installed" and request the INF file for the printer, vista computer can not find the Canon for disc or download the driver for Canon printer (64-bit version of Vista).

    It seems to me that if I can print in local mode on Vista computer, that the correct drivers need to be installed, and because I can print on the HP printer on the Wan that the network configuration is correct, I so need to understand what the origin of the problem.

    Hi quilter48,

    In Vista computer, change the following settings and check if it helps:

    on the computer that is running a 64-bit version of Windows, click Start, point to settings and then click Printers and faxes.

    b. double-click Add printer.

    c. click Next.

    d. click local printer, clear automatically detect it and install the checkbox and then click Next.

    e. click on create a new port and then click Local Port next to Type of Port.

    f. in the Port name dialog box, type the path of the printer by using the following syntax:

    \\Computer name\printer name

    g. click Next.

    h. on the page to install the printer software, click the appropriate manufacturer column manufacturer, click on the name of a printer that supports the same printer as your printer emulation, click Next and then click Finish.

    You can see the following article for more information:

    How to find a printer driver compatible to a computer that is running a 64-bit version of Windows

    http://support.Microsoft.com/kb/895612

    Also check out the following link:

    Network printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • problem setting env dev on a Mac to run the Hello World application

    Hello

    I'm having some problems of setting up my development environment and you try to run the "Hello World" application I would be very grateful if someone can help me.

    I'm on a Mac with:

    + OS X 10.7.4
    + Eclipse 3.7.2 (Build id: M20120208-0800)
    + Java such as reported by "java-version": version

    Java version "1.6.0_33".

    Java (TM) SE Runtime Environment (build 1.6.0_33 - b03-424 - 11 M 3720)
    Java 64-Bit Server VM (build 20, 8-b03-424, mixed mode)

    As I already had an Eclipse environment, I installed the plugin BlackBerry Java (and all available BlackBerry SDK) following the instructions "add the BlackBerry in Eclipse (Mac) Update site.
    https://developer.BlackBerry.com/Java/download/Eclipse?OS=Mac

    If you follow the tutorial Hello BlackBerry ( https://developer.blackberry.com/java/documentation/first_app_1968215_11.html ), after clicking "Finish."
    a dialog box titled "Error - BlackBerry Java Development Environment" appears with the message:

    "Cannot find RIMUsbJni.dll. Without this dll, that FDI can not connect to the computers active USB pocket.
    Add RIMUsbJni in java.library.path ".

    ... with the "OK" buttons and "don't show me this message again."

    As I read in another thread that maybe that's because 64-bit JDK is used instead of the JDK 32-bit ( http://supportforums.blackberry.com/t5/Java-Development/Cannot-find-RIMIDEWin32Util-dll/m-p/342343#M... ), I used the OS X 'Java Preferences.app' to set the 32-bit as the preferred Java JRE, but I still get the same error.

    OTOH, I still have the 64-bit installed eclipse. Does it really matter? Do I have to remove the 64-bit eclipse and install the 32-bit eclipse to solve this problem?

    Thanks in advance.

    Replying to myself:

    I deleted my 64-bit Eclipse and install the "plug-in for Eclipse BlackBerry" for developers without an existing Eclipse environment. Now it works, I was able to load the app into my BB and run it, so...

    It seems that the eclipse of 64-bit cannot be used for the development of Java of BB; the eclipse of 32 bits is required.

  • Having problems setting a timeout of session for wireless LANs

    I'm setting up a WISN with software version 4.2.62.0.

    So that the implementation of wireless local networks, I'm putting in place a session of 12 hours (43200 seconds) time-out value on the tab 'Advanced' edict WLAN.

    However, when I hit 'Apply' and go back in the same edition of WLAN, the timeout value back to 0.

    I tried to check "Allow AAA override" but that has not solved the problem.

    Anyone know how to get around this problem or resolve?

    Thank you.

    Try putting in the CLI and check it took... could be a problem with the code of 4.2, since it's fairly new :)

  • No real problem set not as I thought

    On 12 July, I had a problem and I thought it was fixed.  But I guess it's like pealing an onion, framework has been set, but the non-genuine "Windows" problem continues.  Here is a short summary of my condition and details.

    I use your desktop HP Pavilion 9270t with Windows 7 Home Premium OS.

    My hard drive starts to give me notice that it was about to fail, then in March I replaced it with another (also at HP).  I have restored my software using a System Image, I had done before replacing.  Everything works fine on the computer now... except that I recently started getting the 'not genuine' opinion.  It started shortly after I allowed Microsoft to install some type of authentication software.  After I had my opinion I checked and could not find any trace of the updates of Windows because I had replaced the hard drive in March... so I think that Microsoft had determined that it was not genuine, earlier, but I have no notifications.

    To read other issues on this site, I ran the MGA diagnostic tool and presented the results here.

    With suggestions of the community Andre Da Costa had run the CMD:sfc / scannow.  It found problems and could not fix all of them.

    With suggestions from Bryan Neil, I've run Slui 4 and the automated phone system says my numbers do not match their records.

    I started the revision of all the details and found that the last few digits of the product key in the diag MGA did not match the sticker on the side of the computer.  So I called Microsoft windows supports and they helped me to re - activate my windows using the numbers on the sticker, running Slui 3.  The activation was successful.  I ran MGA diag again and he started to "Validation status: genuine" I restarted my computer and did not get a message "not authentic".  I thought that my problem was resolved.  So, I said has been answered to my question, which I think is closing in on the discussions.

    Well, later in the night, I had an another 'non-genuine message' and I got another one this morning when I started my computer.  Also, I can not Windows 7 update, always.   That's my long story in a slightly shortened version.  I still have a problem.

    Of course, I'd appreciate other ideas and help.

    Here is the diag MGA that I just finished running (the partial product key now matches the thumbnail, but the ID of the product is only partially...) "I don't know how this is used or matches what 00359-OEM, everything else does not work):

    Diagnostic report (1.9.0019.0):
    -----------------------------------------
    Given WGA-->
    Validation status: genuine
    Validation code: 0

    Code of Validation caching: 0x0
    Windows product key: *-* - MXKGC - B7F6X-HQKPX
    The Windows Product Key hash: PjfejluLd3FMEE5aD + qT4X5F/N0 =
    Windows product ID: 00359-OEM-9800882-73385
    Windows product ID type: 8
    Windows license type: COA SLP
    The Windows OS version: 6.1.7601.2.00010300.1.0.003
    ID: {F8D30632-1660-4120-98D0-3F514E7BEAE2} (3)
    Admin: Yes
    TestCab: 0x0
    WGA Version: N/a, hr = 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Product name: Windows 7 Home Premium
    Architecture: 0 x 00000009
    Build lab: 7601.win7sp1_gdr.130104 - 1431
    TTS error:
    Validation of diagnosis:
    Resolution state: n/a

    WgaER data-->
    ThreatID (s): n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002

    WGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    File: No.
    Version: N/a, hr = 0 x 80070002
    WgaTray.exe signed by: n/a, hr = 0 x 80070002
    WgaLogon.dll signed by: n/a, hr = 0 x 80070002

    OGA Notifications data-->
    Cached result: n/a, hr = 0 x 80070002
    Version: N/a, hr = 0 x 80070002
    OGAExec.exe signed by: n/a, hr = 0 x 80070002
    OGAAddin.dll signed by: n/a, hr = 0 x 80070002

    OGA data-->
    Office status: 100 authentic
    Microsoft Office Basic Edition 2003 - 119 cryptographic error
    OGA Version: N/a, 0 x 80070002
    Signed by: n/a, hr = 0 x 80070002
    Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

    Data browser-->
    Proxy settings: N/A
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
    Default browser: C:\Program Files (x 86) \Internet Explorer\IEXPLORE.exe
    Download signed ActiveX controls: fast
    Download unsigned ActiveX controls: disabled
    Run ActiveX controls and plug-ins: allowed
    Initialize and script ActiveX controls not marked as safe: disabled
    Allow the Internet Explorer Webbrowser control scripts: disabled
    Active scripting: allowed
    Recognized ActiveX controls safe for scripting: allowed

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395]
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0]
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

    Other data-->
    Office details: {F8D30632-1660-4120-98D0-3F514E7BEAE2}1.9.0019.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-HQKPX00359-OEM-9800882-733858S-1-5-21-340953277-359391989-2309039599HP-Pavilion,AZ237AV-ABA e9270tAmerican Megatrends Inc.. 5.06 20090917000000.000000 + 00002FE3D07018400FE04090409Pacific Standard Time(GMT-08:00)03HPQOEMSLIC-CPC100119Microsoft Office Basic Edition 20031157D5D0BAD020F14yiL/XJf7QTRJ6qageo4/JbR5YWY =73102-OEM-5690627-261396

    Content Spsys.log: 0 x 80070002

    License data-->
    The software licensing service version: 6.1.7601.17514

    Name: Windows 7 HomePremium edition
    Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
    Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
    ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
    Extended PID: 00359-00196-008-873385-02-1033-7601.0000-1952013
    Installation ID: 000102308351704704389930509252987522071275601813730284
    Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
    Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
    Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
    Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
    Partial product key: HQKPX
    License status: licensed
    Remaining Windows rearm count: 4
    Trust time: 15/07/2013-08:00:51

    Windows Activation Technologies-->
    HrOffline: 0x8004FE21
    HrOnline: 0x00000000
    Beyond: 0x000000000001EFF0
    Event timestamp: 7:9:2013 18:07
    WAT Activex: registered
    WAT administration service: registered

    --> HWID data
    Current Hash HWID: LgAAAAEAAAABAAEAAQADAAAAAQABAAEAln34dORkHlZ + JrysmoiqTYNLxNN2Vg ==

    Activation 1.0 data OEM-->
    N/A

    Activation 2.0 data OEM-->
    BIOS valid for OA 2.0: Yes
    Windows marker version: 0 x 20001
    OEMID and OEMTableID consistent: Yes
    BIOS information:
    ACPI Table name OEMID value OEMTableID value
    HPQOEM APIC-SLIC-CPC
    FACP SLIC-CPC HPQOEM
    HPET SLIC-CPC HPQOEM
    MCFG SLIC-CPC HPQOEM
    SLIC SLIC-CPC HPQOEM
    LASRYVITRAGE HPQOEM SLIC-CPC
    GSCI HPQOEM SLIC-CPC
    SSDT HPQOEM SLIC-CPC

    Analysis of file data-->
    [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395]
    [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395]
    [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
    [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
    [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0]
    [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
    [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

    See if this post for a similar problem solves your problem: http://social.technet.microsoft.com/Forums/windows/en-US/c0250c95-cbe1-4381-814d-4f188bacbdcf/windows-7-is-suddenly-saying-that-it-is-not-genuine

    Note the comment on the Intel drivers as one of the possible causes

    J W Stuart: http://www.pagestart.com

  • Problem setting 7606 router for authentication GANYMEDE +.

    Hello community support.

    I have two routers Cisco 7606 I tried in vain to have users authenticated using servers GANYMEDE +. As noted below, I have two servers (1.1.1.1 and 2.2.2.2) accessible via vrf OAM which is accessible from desktop to ssh login. The real IPS and FFS have been changed because it's a router of the company.

    I use two servers to authenticate on a lot other devices Cisco network that they work properly.

    I can reach the vrf servers and the source in use interface. I can also port telnet 49 if the source interface servers and the vrf.

    The server key is hidden, but at the time of configuration, I can see that it is correct.

    The problem is that after confuring for authentication RADIUS, the router always uses the password to enable instead of GANYMEDE. While debug output shows "incorrect password", why not the router authenticates using GANYMEDE? Why is he using the enable password?

    Please review the outputs below and help point out what I may need to change.

    PS: I have tried many other combinations, including obsolete without success, including the method proposed in this page.

    http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_vrf_tacas_svrs.html

    Please help I'm stuck.

    ROUTER #sh running-config | s aaa

    AAA new-model

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    AAA - the id of the joint session

    ROUTER #sh running-config | dry Ganymede

    AAA server Ganymede group + admin

    Server name admin

    Server name admin1

    IP vrf forwarding OAM

    Ganymede IP interface-source GigabitEthernet1

    AAA authentication login admin group Ganymede + local activate

    GANYMEDE Server Admin

    1.1.1.1 ipv4 address

    button 7 XXXXXXXXXXXXXXXXXXXX

    GANYMEDE Server admin1

    2.2.2.2 ipv4 address

    button 7 XXXXXXXXXXXXXXXXxxxx

    line vty 0 4

    authentication admin login

    ROUTER #sh Ganymede

    GANYMEDE + - public server:

    Server name: admin

    Server address: 1.1.1.1

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    GANYMEDE + - public server:

    Server name: admin1

    Server address: 2.2.2.2

    Server port: 49

    Opening of socket: 15

    Firm grip: 15

    Write-offs of socket: 0

    Socket errors: 0

    Socket timeouts: 0

    Failed connection attempts: 0

    Total packets sent: 0

    Recv packets total: 0

    Oct 22 12:38:57.587: AAA/BIND(0000001A): link i / f

    22 Oct 12:38:57.587: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:38:57.587: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:02.327: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:04.335: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:04.335: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:08.675: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    22 Oct 12:39:10.679: AAA/AUTHENTIC/LOGIN (0000001 a): Select method list "admin".

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:10.683: AAA/AUTHENTIC/ENABLE(0000001A): reported GET_PASSWORD

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): action of treatment application LOGIN

    Oct 22 12:39:14.907: AAA/AUTHENTIC/ENABLE(0000001A): reported FAIL - wrong password

    ROUTER #sh worm

    Cisco IOS software, software of c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    Technical support: http://www.cisco.com/techsupport

    Copyright (c) 1986-2012 by Cisco Systems, Inc.

    Updated Saturday, March 30, 12 08:34 by prod_rel_team

    ROM: System Bootstrap, Version 12.2 SRE (33r), RELEASE SOFTWARE (fc1)

    BOOTLDR: Cisco IOS software, software c7600rsp72043_rp (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 15.1 (3) S3, RELEASE SOFTWARE (fc1)

    The availability of ROUTER is 7 weeks, 5 days, 16 hours, 48 minutes

    Availability for this control processor is 7 weeks, 5 days, 16 hours, 49 minutes

    System returned to ROM by reload (SP by charging)

    System restarted at 20:00:59 UTC Wednesday, August 28, 2013

    System image file is "sup - bootdisk:c7600rsp72043 - advipservicesk9 - mz.151 - 3.S3.bin.

    Last reload type: normal charging

    Reload last reason: power

    This product contains cryptographic features and is under the United States

    States and local laws governing the import, export, transfer and

    use. Delivery of Cisco cryptographic products does not imply

    third party approval to import, export, distribute or use encryption.

    Importers, exporters, distributors and users are responsible for

    compliance with U.S. laws and local countries. By using this product you

    agree to comply with the regulations and laws in force. If you are unable

    to satisfy the United States and local laws, return the product.

    A summary of U.S. laws governing Cisco cryptographic products to:

    http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html

    If you need assistance please contact us by mail at

    [email protected] / * /.

    Processor CISCO7606 - S (M8500) Cisco (revision 1.1) with 3670016 K/K 262144 bytes of memory.

    Card processor ID FOX1623G61B

    PLINTH: RSP720

    CPU: MPC8548_E, Version: 2.1 (0 x 80390021)

    KERNEL: E500, Version: 2.2, (0 x 80210022)

    CPU:1200 MHz, CCB:400 MHz, DDR:200 MHz,

    L1: D-cache 32 KB active

    I'm hiding active 32 KB

    Last reset of tension

    3 virtual Ethernet interfaces

    76 of the gigabit Ethernet interfaces

    8 ten interfaces Ethernet Gigabit

    3964K bytes of non-volatile configuration memory.

    500472K bytes of the map of PCMCIA ATA internal (512 bytes sector size).

    Configuration register is 0 x 2102

    To resolve this problem. Please replace the below listed order

    AAA authentication login admin group Ganymede + local activate

    with;

    Enable AAA authentication login default local admin group

    You have set the group name server as a list of methods and instead use admin as a group of servers, you used Ganymede +.

    Note: Please ensure that you have local users and enable the password configured in the case of Ganymede inaccessible server.

    ~ BR
    Jatin kone

    * Does the rate of useful messages *.

  • BlackBerry Smartphones problem setting up email

    Hello everyone, I reccently purchased a vodafone bb 8900 to my friend, I unblocked him today and I am currently using a 02 sim card. My companion had set up on the phone but deleted emails before you send the phone.

    My problem is when I try to configure my emails I go to Settings / Setup Wizard / Configuration of email, there is no option to create or add an email account. Only the possibility of using a professional email with an Enterprise Server account. And there is no shortcut to the e-mail settings in the setup folder.

    does anyone know how to configure my e-mail from here?

    PS This is my first blackberry and I am a complete novice with this stuff so if you can keep things simple, it would be greatly appreciated thank you Ryan

    Hello!

    A few things for you...

    KB05099 Steps to take before selling it, or after buying a used BlackBerry smartphone

    http://supportforums.BlackBerry.com/Rim/Board?Board.ID=NewBlackBerryUsers

    http://NA.BlackBerry.com/eng/support/blackberry101/Setup.jsp#tab_tab_email

    KB03087 Configure BlackBerry Internet Service, BlackBerry mail and e-mail or account e-mail BlackBerry

    It is likely that some of the seller in the first element steps were not completed... those that must be made before continuing. I suggest to do it again. More... your friend got it on BES? If so, there are a few extra steps (in this picture) that must be made.

    Good luck!

  • Problem setting up VPN

    MY problem is that when the vpn is configured, and I try to run a tracert to one of my remote PC across the VPN, the VPN router sends information from the internet and do not attempt to open the tunnel. what I am doing wrong?

    I use a cisco router 1700 and connect to a vpn concentrator 3030 Cisco

    Current configuration: 1522 bytes

    !

    version 12.3

    horodateurs service debug datetime msec

    Log service timestamps datetime msec

    encryption password service

    !

    router host name

    !

    boot-start-marker

    boot-end-marker

    !

    enable secret 5

    !

    MMI-60 polling interval

    No mmi self-configuring

    No pvc mmi

    MMI snmp-timeout 180

    No aaa new-model

    IP subnet zero

    !

    !

    !

    IP cef

    Max-events of po verification IP 100

    !

    !

    crypto ISAKMP policy 9

    BA 3des

    md5 hash

    preshared authentication

    Group 2

    ISAKMP crypto key (shared key) (peer IP address)

    !

    86400 seconds, duration of life crypto ipsec security association

    !

    Crypto ipsec transform-set esp-3des esp-md5-hmac TS1

    !

    crypmap 1 ipsec-isakmp crypto map

    defined peer (IP ADDRESS of the peer)

    game of transformation-TS1

    match address 101

    !

    !

    !

    interface Ethernet0

    IP (IP ADDRESS)

    NAT outside IP

    Half duplex

    crypmap card crypto

    !

    interface FastEthernet0

    IP (IP ADDRESS)

    IP nat inside

    automatic speed

    !

    the IP nat inside source 1 interface Ethernet0 overload list

    IP classless

    IP route 0.0.0.0 0.0.0.0 (default router)

    no ip address of the http server

    no ip http secure server

    !

    !

    access-list 1 permit one

    access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 1)

    access-list 101 permit ip host (LOCALHOST using NAT) host (remote host 2)

    access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 3)

    access-list 101 permit ip host (LOCALHOST using NAT) host (the remote host 4)

    !

    !

    Line con 0

    line to 0

    line vty 0 4

    7 PASSWORD password

    opening of session

    !

    end

    Hi Jim

    You must change the access list statement also the declaration of overloaded nat...

    You must deny traffic between 2 vpn networks is natted...

    You can check the below link configuration to the top of the same...

    http://www.Cisco.com/en/us/Tech/tk583/TK372/technologies_configuration_example09186a008009448f.shtml

    regds

Maybe you are looking for

  • In El Capitan of the iPhone the mail server does not

    I did a clean install of El Capitan 10.11.2, then 5.0.15 server on my LAN. Then I started the mail server to server to use as my IMAP mail server. It works very well fran all my Mac (Apple Mail or Thunderbird) and PC (Thunderbird). But when I try to

  • iPad, updated to iOS 9.2 cannot access to App Store

    Hello after update to iOS 9.2 when I open App Store I get white screen How can I solve this problem? Best regards Caesar

  • passage on zero power

    Hello I'm usign zero crossing.vi to measure frequency, and 1/2 (RMS) In addition, I need a release supplement that provides a logical output for each passage of zero. Maybe it's pretty easy, but I'm not good in labview. waiting for your help. Thank y

  • Windows Movie Maker: subtitles Flash?

    I do a movie, and when I add a text, it works fine, but if there is a video playback play so that the text, the text is blinking when the video plays, but this only happens in Windows Movie Maker. If I publish the video, there is no flashing problems

  • Quick search of google Xperia

    Hey guys,. I deleted the quick search initial google which was at the top of my screen, but I can't add my google quick search widget back to the top because it did not allow me to edit this part. Thank you very much for your help!