HP250 G1: slow network,... and more often fails

Similar Questions

• After a clean install of Windows 7, I can't connect to the wireless network and more problems...

  I recently did a clean install of genuine copy of Windows 7 Home Premium to clear unwanted programs all on my computer. Because the product key are disabled unexpectedly.

  The installation works fine, but after the installation. I can't connect to a wireless network, because there is no network adapter installed on the computer.

  Also, I can't set my screen resolution of 1366 x 768. Before any new install, the screen resolution sets to 1366 x 768 as native and recommended screen resolution. Now, I'm stuck at the screen resolution 1024 x 768. I need to change the graphics card so my laptop screen can support 1366 x 768? If necessary, please give me instructions on how to do this.

  Thank you.

  Acer Aspire one C5Cbb-722

  Go here, select your model, then download and install the network and video drivers.

  http://www.Acer.ca/AC/en/CA/content/drivers

• Click left and right is messed up. A lot of things does more and more things fail to work.

  It started a few days ago. I use a refurbished Acer Netbook. While on my desktop screen, left click lowers the list box dropdown right click almost as if the computer is configured with a one-click option.

  It also began to fail on me. I currently have Google Chrome (who I am right now) and Zune as my two tabs to the right of the start menu. I can't open w/out Zune by using Alt + Tab.

  In addition, using search engines like search engine for YouTube to find videos is miserable. I'm on the left, click on the search bar and get in a letter, when the drop-down list box right click goes down won't let me type anything else in

  I hate this problem because I can't do anything on my laptop now. Becomes slower and slower now I must move on.

  This could be a software, but it might as well be for lack of material. It is not possible for me to say. If the machine was present in the shop, I would:

  1. remove all the data needed to be backed up from outside of Windows. See the end of this post for how to do this.

  2. test equipment to ensure that it is healthy (and I suspect that it is not).
  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If everything fails, you will need to make the decision whether to replace based on what component is, its cost, the cost and age of returned computers, etc.

  3. If the material passes all the tests, do a factory restore of Windows with the Acer recovery media. If you do not have the recovery disks, you can order them at Acer. It is generally very cheap, around $ 35 to $ 30.

  Extract data from Windows outside:

  1 remove the drive and put it in a box of USB drive or use a USB adapter. Attach it to a computer that is running a working XP/Vista/Windows7 installation. Use the work of Windows Explorer to copy the data to the hard drive of the system to the rescue and burn data on cd or dvd, or copy it to an external hard drive. I prefer not to do it if I know the drive is infected because he has a chance to infect your host system. In these cases, I use #2 below.

  2. you can start the computer target with a Bart PE (XP only) or Linux Livecd such as Knoppix or Ubuntu and retrieve the data in this way. This has the additional advantage to tell you if the problems you are experiencing are hardware or software related because if the computer behaves perfectly in Linux, you know that Windows (software) is the culprit. Conversely, if the computer behaves badly under Linux, you will know that there is a hardware problem. This is general information on the use of Knoppix for the recovery of data when you do not have Windows:

  You will need a computer with two cd records, one of which is an engraver of CD/DVD OR a USB thumb drive with enough capacity to contain your data OR an external USB hard drive. Download Knoppix .iso image file and create your bootable CD *. If you do this in a previous (XP or Vista) operating system, you will need the third burning like Nero, Roxio or freeImgBurn software (Windows 7 can burn .isos natively). Burn as an image, not in the form of data. Then boot with the CD that you created and the Windows files will be visible under Linux. If you want to burn CD/DVD, there will be a Linux burning program to use.

  * If your computer has only an optical drive and you want to use this drive to burn data or need to test drive, you can create a USB bootable Linux instead of a bootable CD. This site will show you how to do it-http://www.pendrivelinux.com

  http://www.Knoppix.NET
  http://www.nu2.nu/pebuilder/ - Bart PE Builder

  See also - http://lifehacker.com/5504531/the-complete-guide-to-saving-your-windows-system-with-a-thumb-drive
  http://www.howtogeek.com/HOWTO/17044/move-files-from-a-failing-PC-with-an-Ubuntu-Live-CD/
  https://help.Ubuntu.com/community/LiveCD and for future disaster recovery programs - http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!

• Whenever I get updates for my Microsoft Vista. To get a slow start and programs that fail to start?

  I have the following problems

  1. Programs fail to start
  2. Programs fail
  3. Photoshop 5.0 allows to work with my Vista
  4. Pinnacle 11 used to work now it dosent, even if it is designed for Vista
  5. I can't even get my CA Security Suite
  6. I can't install a necessary program for my training

  Hi JKEIIT96,

  Follow the steps below:

  Step 1:

   

  Create a new user account and check if the problem is recurring in the newly created account.

  Step 2:

  If the problem does not persist in the new user account, it could indicate that your old user account is corrupted.

  For instructions on repairing the corrupted user profile, see repair a user profile corrupted .

• Panic reports more and more often

  Hi all

  I know you have seen this topic awhile, but like everyone else here I do not know how to interpret the below the error log. Could someone help to find the problem I'm having with my laptop.

  To cite that if this isn't only the League of Legends in the BSD process that gives me this error ("process corresponding to the current thread BSD name: LeagueofLegends") it may also be I work with Lightroom or Photoshop.

  I would like your comments on what I want to do repair... If possible.

  Thanks to all those who may share some light on this issue!

  Panic report *.

  panic (the appellant 2 0xffffff800bbce5fa cpu): Kernel trap at 0xffffff800bb83500, type 14 = page fault, registers:

  CR0: 0X000000008001003B, CR2: 0XFFFFEF802A0F761E CR3: 0X00000001A2BB70B8 CR4: 0X00000000001627E0

  RAX: 0XFFFFEF802A0F75A0, RBX: 0XFFFFFF80159283C0 RCX: 0 X 0000000000000000, RDX: 0X00096F2A00000000

  RER: 0XFFFFFF8116213BE0, RBP: 0XFFFFFF8116213C00, IHR: 0XFFFFFF8018371FA8, RDI: 0XFFFFFF80159283C0

  R8: 0 X 0000000000000001, R9: 0XFFFFFFFFFFFFF000, R10: 0X000FFFFFFFFFF000 R11: 0XFFFFFF80332B3D20

  R12: 0XFFFFFF80159283C0, R13: 0XFFFFFF80165F9C80, R14: 0 X 0000000000000001, R15: 0XFFFFFF80110A7C40

  RFL: 0 X 0000000000010246, RIP: 0XFFFFFF800BB83500, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0xffffef802a0f761e, error code: 0 x 0000000000000000, CPU error: 0 x 2, PL: 1

  Backtrace (2 CPU), Frame: Return address

  0xffffff8116213870: 0xffffff800badab12

  0xffffff81162138f0: 0xffffff800bbce5fa

  0xffffff8116213ad0: 0xffffff800bbec463

  0xffffff8116213af0: 0xffffff800bb83500

  0xffffff8116213c00: 0xffffff800bb85156

  0xffffff8116213c20: 0xffffff800bb69708

  0xffffff8116213c90: 0xffffff800bb70323

  0xffffff8116213cd0: 0xffffff800bb70040

  0xffffff8116213d00: 0xffffff800bb67eca

  0xffffff8116213d40: 0xffffff800bb610ae

  0xffffff8116213e70: 0xffffff800bb563dc

  0xffffff8116213ea0: 0xffffff800bafea41

  0xffffff8116213ee0: 0xffffff800bf9afc8

  0xffffff8116213f50: 0xffffff800bf9ad0c

  0xffffff8116213f60: 0xffffff800c028320

  0xffffff8116213fb0: 0xffffff800bbec958

  The process corresponding to the current thread BSD name: LeagueofLegends

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel: 0x000000000b800000

  Text of core base: 0xffffff800ba00000

  Text __HIB base: 0xffffff800b900000

  Post the whole kernel panic report.

  Ciao.

• recently, I intend to download, but unfortunately this is already more than 5 attempts. Thanks to the slow connection and the power outage, my download has failed to complete. Would it not possible to download the app again? Concerning

  Recently I wanted to download, but unfortunately it's already more

  only 5 attempts. Thanks to the slow connection and the power outage, my

  to complete the failed download.

  Would it not possible to download the app again?

  Concerning

  A trial version is not different from the full version.  Using your serial number to activate a trial version, the access limit is removed.

  If you get access errors thrown at you when you try to use a download link, check that you have enabled cookies and clear your cookie cache.  If he continues to not try to use a different browser.

• Slow speed and "Windows Explorer has stopped working" and often "unresponsive".

  My laptop Gateway (1.46 GHz Dual CPU) is under Vista Home Premium and is very slow during the implementation of new screens or changing the screens in an application, often displaying "not responding" for up to a minute.  Sometimes the message on Windows Explorer appears. It is also very slow while booting or passage from one user to another.  I regularly remove temporary files internet and visited sites, regularly virus and spyware scanner. My usual applications are Quicken, Internet Explorer, I-tunes and webmail.

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• iCloud photo library stuck in an interminable loading which slows down and stops my entire network.

  Last month I've upgraded successfully to El Capitan. Since then, after choosing to automatically download and store my entire library to the cloud, the download process caused a lot of problems. First of all, I had to leave the laptop on day and night and connected to the internet to complete the download. He has almost completely downloaded (with several modem restarts because the massive data download accidents caused connectivity) but then I had a planned trip and had to shut down the process. I tried to start again when I arrived at my destination, but it seemed to have started the process everything again (see below where the progress bar is at the very beginning again when previously, it was almost completely to the end) and close network of my poor host several times AND he ate all my CPU activity slow down and even stop any other activity of the laptop. Finally, I had to leave the process altogether for the rest of my visit. In fact, I had to disable wifi on my laptop because the process continued in the background even when I got the Photos app off the power. When I returned home, I studied the problem and learned how to fix the library by pressing the command and Option keys when I turned on the photo program. Once, the process started all over again and this time, he showed an any number of items to download (there was less than 25 000 points before this download now it shows more than 26,000).

  

  Finally, I got it at the Apple Genius Bar, in the hope of a quick solution. He, even, fixed the library as well as a few other permissions by using Apple's Diagnostics. Everything seems to be working again, but the process had to start all over again for some reason any and he told me to connect the laptop to the modem via a cable and left running overnight until the process completed. I did it. The first night, I was happy. It seemed that 25% of the process had already been completed. At this rate, it wouldn't take another 4 days. He told me that when he gets in, he would never to do it again. HOWEVER, after the second night of leaving it night directly connected to the modem, I checked it this morning and it seems to have started all OVER AGAIN FROM THE BEGINNING! Still, he hangs up my entire network. I can't watch the Apple TV, or use my iPad for work or my iPhone to access and other plans. Currently, there seems to be a nightmare without end of download and spoil my network (and notice that there are now more 28 000 points).

  

  This is intolerable. I can't live in this endless loop of photos download crashing my network and slow down my programs. I understand that this is not a problem isolated to me. So, did anyone found one simple solution other than its use onedrive or flickr or another synchronization photo program?

  28 000 pictures takes a lot of time - it took me ten days to 7000 and whenever you try to 'fix' it do you it longer - I stopped mine during the day when I was home so it wouldn't screw up my internet access form other devices, defined the Mac not to go to sleep and turn anytime I don't have internet

  Basically, your choices are to turn it off and not use ICPL or use it and let him complete without constant interference and restart the process

  Once he finished he initial transfer it stays out of the way, even with large updates (I added more than 10,000 photos since my initial download)

  LN

• Network slows down and stops receiving data the halfway during the loading of a site or downloading

  In windows 7, my network slows down and stops at the midway during the download or load of a site with the largest size. When I restart the download, the same problem occurs again. When I use a download manager I have to stop the download and then picks up the part were stopping to download and vice versa in order to finish the rest of the download to complete. This problem is only with windows 7 and windows 7 sp 1.

  Hello

  ·         Did you follow all the methods provided?

  ·         You are using cable or wireless network connection?

  Let us know if you have followed all the steps of troubleshooting mentioned in the previous post, and what were the results, so that we can help you further.

  If you use try of connection through check wireless network and wired network. If a cable that you can try to use a new cable to see if the one you use has problems. If it is I'd see if anyone is leeches wireless turn off your connection. Note If you have more than 1 person on a 300kps connection there is no chance, you're going to both to have that kind of speed with a shared connection, especially if you use a hub, although I do not agree that a decline until 20kps is rare, it would not if someone is hogging the bandwidth of your connection.

  Method 1:

  You can also try to update the latest NIC drivers on the manufacturer's Web site and check if it helps.

  Reference:

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Method 2:

  Try to release and renew the IP address, and check if this may help. To release and renew your IP address follow these steps:

  a. open windows command prompt

  b. Click Start - Run-type cmd and press enter

  c. to release your ip address ipconfig/release , press Enter

  d. to renew your ipconfig/renew IP address

• Someone knows the extremely slow response and delay with "not responding" on more complex web pages after installing updates on Friday?

  Since the installation of 16 Nov received security patches I've known really slow response with Internet Explorer; 2 minutes between web pages on my WIN7 Pro PC and not much better on my VISTA Business PC.  I get expired on complex web pages the context comes up with "program addresses not" or the pop-up at the bottom of the screen asking me to do it again.  The problem is not limited to Internet Explorer, but also prevents Safari to come.   I tried to reinstall WIN7 Pro, but the problem remains.  I'm also not able to run You Tube or other videos.  There is no download or updated or running Belarc Advisor Windows installation problems.  While the problem occurs with Yahoo Mail, it is not an impact send/receive in Outlook.  Does not appear to impact, nothing other than browsing the web.

  Hi ephd,.

  Thanks for posting in Microsoft Communities. The problem description, I understand that the internet works slowly. Provide the following information:

  ·         Have updates you installed?

  ·         You get the error message?

  Follow these methods.

  Method 1: Temporarily disable the security software .

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode with network and check.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: Follow the steps in the article.

  Internet Explorer is slow? 5 things to try

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  You can see these articles for more information:

  Why is my Internet connection so slow?

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• Windows XP Pro SP3 slow navigation and performance of the Internet network

  I am running a Windows SBS 2008 domain with 70 clients - many of which are Windows 7 Pro (and not affected by performance problems) and other clients are Windows XP Pro.  Recently, apply 2 updates to all Windows XP clients to a problem of double authentication with RDP Server 2008 platform - two updates are http://support.microsoft.com/kb/969084 (install the RDC 7.0 client upgrade) and http://support.microsoft.com/kb/951608 (adds the registry entry in Windows XP to enable CredSSP).  Now, the patches of handsets allow RDP clients to Server 2008 platform and enter the credentials of the user only once.

  However, given that these updates have been applied, about 7 of 20 Windows XP clients are extremely slow performance when searching for network resources (sharing drives, Outlook / MS Exchange and Internet browsing synchronization).  Not sure if the 2 patches are coincedental or related.  I tried rewriting changes from two patches, drivers NETWORK card and even tried to replace the NETWORK adapter with new ones.  No change in performance.

  However, can I uninstall / reboot / reinstall the Client of Microsoft Networks and clients perform as expected.  Over time (sometimes), the problem reappears.  I have been through the event logs and don't see any errors that indicate a failure to communicate on the network.  All clients receive assignments IP from the DHCP server and updates are managed via WSUS.

  Ideas or recommendations would be greatly appreciated.

  Hello DCAggie,

  Because you are on an area of activity, please transfer this issue to the address provided below on the Microsoft TechNet forums.

  Windows XP IT Pro

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

  Thank you

  James

• starts to slow down and there is a delay of approximately 15 seconds or more before he realized my statement through my mouse

  I have laptop with system 'vista basic' which works fine most of the time, but after that, I was on it for maybe 10 minutes, that it starts to slow down and there is a delay of 15 seconds or more before he realized my statement through my mouse. I ran "defender", indicating no problem.

  I am not a very experienced operator and am reluctant to perform the instructions given by the guides, etc., in which case I have to delete the files, etc. If some can help me in the simplest of terms to help me with my problem?

  Hello pinkyxc,

  Thanks for the return of the response.  I think first to plug in a USB mouse and see if you are able to reproduce this problem.  Did you go to the manufacturer website and download the drivers for your mouse lates?

  If your laptop has built in the diagnosis provided by the manufacturer test?  You get all the errors when this happens?

  In addition, you may attempt to perform a restore of the system to a point prior to the installation of IE 9 and see if this corrects the problem.

  System Restore:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Please let us know status.

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• Center network and sharing Center shows "Page failed to load".

  On Windows Vista, Network and Sharing Center comes with a blank page except for text in the middle and says 'The Page impossible to load' steps, I tried:

  Clean boot

  SFC/scannow

  CHKDSK /r

  System Restore (has not only once other succeeded, but does not solve the problem)

  None of them have worked. I have reviewed the SFC newspaper and looked at DLL files, it says could not be fixed and replaced those with well known copies.

  A clean install is not a good option in this case either. My thoughts are that it is a corrupt DLL somewhere or a DLL that has incorrect permissions.

  On another note, I can't connect to wireless networks either. To be more exact, no networks appear in the list (I can connect by typing the SSID manually. The pop-up icon wireless in the status bar indicates "networks are available", but the list shows no. I believe that these two issues are related. Please give suggestions and connents, I appreciate all help.

  Thank you.

  Hello
   
  Do you remember any change to your computer before the problem?
   
  Search for related errors and Event Viewer .

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  You can uninstall the drivers for the network adapters in the Device Manager and reinstall the same.

  To uninstall the wireless device manager,

  1. click on Start , type Device Manager in the start search box and press ENTER.

  2 locate the network adapters and expand the same.

  3. Select the adapter, right click and selectUninstall.

  4 restart the computer, if prompted.

  Pilots should settle automatically after the computer restarts.

  Note: Before uninstalling the drivers from Device Manager, make sure that you have a backup installation files.

  Step 2:

  A. If not help, to create a new user account and check if the problem persists.

  B. Si the problem is resolved in a new user profile, then probably you had a corrupted profile and can be remedied .

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• How to get windows live to check for new messages more often and?

  How can I get windows live to check new messages more often and how do I get it to send mail when I'm done otherwise that hit the button send and rec? I miss OutLook Express!

  OH, and why can't get us Outlook Express on a Windows 7 PC? It's a great program! User Friendly etc. I hate Windows LIVE BTW!

  Jimmy, WX9DX

  Re email check frequency, see here...

  http://email.about.com/od/outlookexpressmailsync/Qt/Check_for_New_Mail_Periodically_in_Windows_Live_Mail_or_OE.htm

  There are other e-mail clients...

  http://www.MakeUseOf.com/tag/free-email-clients-Windows-7/