HP2540 wireless issues

I hope someone can help...  I am running a mac with os x version10.9.4 book air and did not miseriably to connect my HP 2540.

I ride through the whole via a USB connection and departure can I communicate with the printer and access the printer web page. After about two hours, the wireless connection is lost, even if the blue wireless is solid, just like direct light wireless. I tried several times to add the printer in system preferences again but cannot. If I repeat the whole upward again the same problem occurs

Anyone have any ideas?

Garry

OK, so your router is 192.168.2.0 (ou.1.

What is the IP address of the printer you are trying to set?  It must be 192.168.2.2 through 192.168.2.9.  Make sure that you do not configure a DHCP reservation.

Tags: HP Printers

Similar Questions

  • HP Envy 17-j053ea (E7A75EA) wireless issues

    Hello

    HP Envy 17-j053ea (E7A75EA) wireless issues

    Very slow performance on wireless and many drop-outs.  Don't you this problem with other laptops, etc. It doesn't matter how close to the router that I am.  It is virtually unusable.  Netwrk cable is very fast, this laptop is fine.

    I updated the bios to the latest version.

    Wireless device is Intel Centrino N2230 network card. It runs the latest driver - version 15.10.0.11

    Any help please it's driving me crazy?

    Thank you

    Malcolm

    Hello

    The latest drivers still does not work.  Finish I swapped out for an Intel Centrino Advanced - N 6235, which works perfectly and is steady as a rock.

    Too bad that I had to do it on a new computer laptop well!

    See you soon,.

    Malcolm

  • Satellite Pro A200 wireless issue sometimes disconnects

    Hello

    I have a Satellite Pro A200 with a wireless issue.
    I use home wireless. Every now and then while surfing it won't find the page. I try to connect via my VPN connection I have for the office.
    If you click Cancel, it will sometimes continue surfing very well but sometimes can not find the page.

    I disabled the wireless and connection is used hard and no problem.
    It would be desirable to re - install the drivers for the wireless?
    I think I've removed the software toshiba Wireless thing (forget his name) when I got it.
    So maybe that's the issue.

    Any help would be apreciated.

    Thank you

    Of course, it would be desirable to update the WLan driver in most cases it s WLan compatibility issue between card WiFi and router

    I recommend updating the driver WLan and also you can update the BIOS if a new version has been available for your laptop model

    Best regards & good luck

  • EA6500 - Wireless issues, possibly related to the leases Varied?

    I am passage of router Netgear WNDR, and this EA6500 V1 really gives me some very minor, recurring wireless issues.  I have to assume its ties to certain parameters, I'm just not see.

    My laptop will lose just an internet connection.  The connection to the router is still strong, but I have to follow the troubleshooting for Win7, it restarts the network card in the laptop and its good once again.  Then a random amount of time later, he'll do it again.  Seems to happen a lot more, I'm of the router, as in the night, the laptop comes on the floor, I'm leaving 5 bars 3 (speed is little unchanged) and I will have 4 or 5 of these occurrences.

    Wireless printer is really been a pain with this.  Since the 430W brother I can find and easy access to the home network.  From there its been sporadic at best.  If I connect to the router (immediately after Assembly), I can see the printer and its Online.  Research on a laptop computer in the House he won't find it.  If I just leave or make several reboots it will come back.  I add, print a test page and everything is fine.  The next day, the printer is in offline mode on the router and is not reachable.  On the printer itself, that it believes its fine.  If I remove the device, and then restart the printer and do everything again I can find it, but only for that day there.

    The laptop computer and the printer are on the notebook 2.4 Ghz network join on n 150Mbps.  I added the printer of the demilitarized zone and increased maximum rental period that the field would allow.  Always without success.

    Any ideas?  With the old router that the printer wireless joined the day we bought it, and two years later, he was still active and had never been restarted.  Even with the laptop.  Its about 3 years and I have never had to restart the internal card like that.

    For now, I went back to Netgear but I'd like to get the EA to work if I can so I can give my old router to my parents.

    Thank you!

    Ryan

    If you have a wired connection stable, this challenge can be because of wireless interference. Try changing the channel wireless 1, 6 or 11.

    If the wired connection is not as stable and as long as you have a stable connection directly to the modem, clone the MAC address of your computer on the page of configuration of the router if you have a cable internet connection. For Linksys WiFi Smart, go to connectivity > Internet settings > enable MAC address Clone > Clone My PC MAC > Apply. For the classic web interface, see this link.

  • Pavilion DV7T - 1200 CTO happened w / Wireless issues - work in progress - solved

    I took delivery on a DV7T yesterday.  It is configured with the minimap Intel 5100 AGN & Vista 32 Home premium (my first Vista machine).  I had updated my wireless router home in anticipation of his arrival, installation of a model of D - Link DIR-655 (Vista friendly 802.11n capable).  The router plays well with my existing XP laptop and has been configured for WPA2 AES & compatibility b/g/n.

    I configured the appropriate connection parameters and launched a manual connection.  I made changes to the router so the SSID was visible and defined the DV7T for automatic connection, but it took often more a minute before the DV7T would see even the network wireless and even a minute or two before reporting the signal strength. Each time, connection attempts failed, reports of a lack of response from the router.  After the double check (and returning) settings and password several times (and the audit by doing the same thing on another laptop which connected very well) I finally decided there was a problem and called for help.  Given that the order had been placed through Costco, I went through their Concierge as a first level service. Their script for was power off all computers (XP) on the network saying that a common problem was having a Vista machine join a network with XP already connected machines. No joy. Same lack of goodness after removing/reinstalling the drivers. It was as much as the script went to attempts at original resolution.

    At this point, no resolution & I plan just to return the machine for a refund (lack of wireless really it would damage the intended use). Propelled upwards all the equipment I had turned off.  Bored of not knowing for sure if it was an inherent incompatibility or a hardware problem (the day of delivery!)  I ended up out and pick up an express format card card N Wireless of Linksys.   Responsible drivers, plugged in the card and voila! immediately, the machine connects using the configuration of the connection that I had entered previously.  On top of that, the flow of data showed that 240-270 mbits.

    With this info, I went back to service, initially to the connection of Costco and then discussed in HP support. After a 3 hour marathon call, HP sends a replacement 5100AGN card to 'see if this fixes things', if it is not, the machine must go back to the service (as a problem of antennas would not be repairable client). Part of the duration of a call has been associated with finding the right part for a machine CTO.  The wireless card on my machine something SN (Broadcom) was set apart from the 5100 (although the list mentioned packing a minimap Intel next gen and the Manager device reports an Intel 5100AGN).  They have finally found a suitable part number (I hope).

    I just thought I would pass this along in case where someone else found themselves in a similar situation.  I'll post much after that the replacement property is displayed. As a side note, the Linksys N Ultra Rangeplus expresscard works really well as a replacement. Of course I'd rather not have something projecting from the side, but it certainly did the job.

    EDITION - ADDENDUM

    After the above post, I couldn't help but think that a problem of antennas sounded very probably - maybe a lead broken/disconnected (something I mentioned to the technology of the telephone service).  In any case, just a minute before, I went ahead and pulled the bottom panel, so I could take a look at the wireless card.  Technology said there would be two tracks running to the card - only was connected, the other has fallen in a crack between the card and the frame.  The wire not connected has been labeled "main" and there is a connector on the "main" labelled map  The two sons had been celo-glued to the card (in the broad sense), but I had the disconnected an oriented properly & pressed into the connector on the card.  He buttoned & turned on the machine.  He immediately finds the wireless network and connection has been made in a few seconds.

    My only ongoing question may turn out to be wireless performance.  Connection with the linksys card speeds were always above 200 (230-270).  Speeds, I see on the bed in so far have been initially lower than 100, with the best after being 150 mbits.  Any suggestions for how this can be improved?  Will the adapter 'learn' alone and get better over time?

    FINAL ADDENDUM-

    Model found on another forum that the 5100AGN has apparently a maximum 150 Mbps on a 300 Mbps max for RX & TX... the 5300AGN is 300 in both directions.

    This suggests that the 150 that I see is as good as it gets for my integrated card. Apparently, the Linksys expresscard I used is good for TX/RX 300.

    Nick

    Message edited by skhowell on 02/21/2009 08:22
    Message edited by skhowell on 02/21/2009 17:00

    I don't know that the costco guys worked just for the trouble shooting script, he gave.  On the plus side, he had an understanding of the issues, & spoke vernacular American English (and not in a call center offshore).  He was ready to continue, but I needed a time out.  The second call (after me obtain Linksys for comparison) was good enough and the technology was very ready he climbs to a technician of HP (once again, the continent - not off shore), which was certainly ready to order a replacement part, but crossed a few last checks more that the internal card could not be implemented. The part was sentenced & will be shipped without requiring a deposit of me. The only negative for telephone exchanges, it's neither opening proposed leads the lower panel to check the antennas have been connected correctly.

    As stated in the original post - edited-, the final fix was to open the Panel & visually notice that a 'primary' marked lead was not connected to the wireless card.  Attaching which lead to the consequence named connector on the Board eliminated the problem.   The disparity of the connection speeds between the internal 5100AGN and the Linksys 802.11n expresscard was due to the limitations of card design (150TX/300RX 5100AGN and 300 TX/RX for the Linksys), so the 150 Mbps I see currently for internally is as good it will become.  I'll probably send the rear replacement not opened as opposed to actually Exchange cards. (I don't think that the shipment may be shortstopped at this point...).

    Nick

  • Satellite P200-1ED - wireless issue

    Hey guys,.

    I hope that I write in the right forum!

    I had my * Satellite P200-1ED * for a while now and he used to work on the internet very well.

    However these last weeks I tried to sort, because it is quite frustrating not being able to go on the internet on my laptop!

    ---
    My network is encrypted WEP and SSID is set to broadcast, however I can't connect to it.

    I've updated the drivers of the * Atheros ARG5007EG * at the latest and I still cannot get lucky.

    It seems that the other networks appear sometimes to connect with the exception of my own. * HOWEVER * I have two other laptops (both on Windows XP) which connect perfectly to the network anywhere in the House and in the garden, so it's not a network range deliver - I even tried sitting right next to the router with this laptop!

    Please could someone give me some advice, I tried my best to solve myself, but I'm out of ideas.

    Responds very well appreciated.

    Hello

    I think it's a question of wireless settings. I suggest you remove the card from the Device Manager and all the fittings 'network connections '.

    Then, install the card and create a new wireless connection and RECHECK your settings / wireless password, SSID, IP, etc...
    The last resort would be to recover the machine in order to exclude all software related issues.

    What kind of router do you have? Have you already tried to reset all the settings of the router and on your machine and disabling WEP encryption to make sure that the machine connects in its basic configuration to the router?

    Welcome them

  • With Satellite Pro L300 wireless issues

    Hello

    I recently install a new wireless network and a new laptop.

    The wireless access Point is a Netgear WG102.

    Wireless laptop card is a Realtek RTL8187B.

    OS: Windows XP SP3.

    Everything connected correctly the first time and was allowed for the first days but it has stopped working. When the laptop was switched on it would not automatically connect to the access point.

    When I opened the Windows wireless configuration utility it told me that there are no wireless networks in range. It was not true that there is a non-Toshiba laptop in the same room connected to the access point at full power and never had any problems.

    As a matter of course, I updated the firmware on the router and updated the drivers on the laptop at the latest.

    Realtek drivers came from their site:

    [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8187B]

    I've even updated the Bios later and the problem still occurs and intermittently - still sometimes, when it starts it will connect, others he used.

    When he used - Windows cannot disable or remove from Device Manager and crashes when you perform a reboot - it of like the unit is not an answer and causing Windows problems.

    I couldn't find anything specific to the event opens a session on the issue.

    I think to do a guarantee ask for it.

    Any suggestions would be welcome

    Thank you

    Dave.

    Hello

    I would like to start with your last sentence. Warranty claim it is very interesting. Can you please tell me something first: you have Windows XP edition SP3 family of Toshiba recovery image or you have installed Windows XP SP2 home edition on your own? If you install on your own how you can make a claim under warranty. I'm sure that there is a problem with SP3. I always use SP2 and my laptop works well. Security features in Sp3 are not known to me, but I recommend you to check all the WLAN settings. Perhaps there is a new option that must be activated.

    I assume that your laptop comes with Vista OS. Am I right about that? Have you noticed the same problem with Vista preinstalled running?

  • HP Envy dv6 with Qualcomm Atheros AR9485 wireless issues

    Hello! I have a few questions on a computer I bought recently, HP ENVY Notebook PC, number of product B5Y66AV dv6 wireless. The internet speed is much slower that it should be and also randomly disconnects / reconnects, a problem that I didn't with my previous laptop. It is not a problem with my router; all my other wireless devices, including other computers, work very well. I tried to install the new driver updates, updated the BIOS, tweaking Power Options, all to nothing does not.

    The first three days I've had this laptop here are no problem at all. The internet worked very well, and everything was fine. The issue only began to appear so.

    My network card is AR9485 of Qualcomm Atheros 802.11b/g/n WiFi Adapter. I'm running on Windows 8.

    Hi Kiydon,

    Take a look at this document and try the troubleshooting steps to see if it helps to solve your connection problems.

    Please let me know

  • T540p - wireless issues

    I don't have the machine to my site, so the info I have is part of me Teamview'in the machine and the response I got from the user on the phone.

    One of our T540p machines are having wireless connection problems. He connected after a fresh reboot (most of the time) but if its connected to a wireless network and the sleep/hibrinate that it will not reconnect.

    The strange thing is that issues disappears if the machine is connected to a wired connection, e.g. in docking station.

    I installed all the latest drivers. If I don't get the advice here, I think that call patient support for a replacement wifi-card.

    It turns out that there is an aerial cable loose causing the problem on this machine.

  • Aspire V3 keyboard and wireless issues

    Hello

    I have an Aspire V3 - 771 G-9809, that is a little more than two years.

    Some keys on the keyboard at the top left do not work, such as the A, Q, 1 and Esc.  I called Aspire support before the expiry of the period for free help and they gave instructions to resolve this problem, something to do with the accumulation of static electricity upward, the included patch remove the battery and enter the BIOS to boot, but I do not now remember what the steps were.  Does anyone else have this same issue or know the steps to fix?

    In addition, for a while now the wireless is not connected and is low and slow when connected.  I don't think that the problem is with my router or my network as all other computers and devices in the end work from home.  I have to constantly disconnect, then reconnect the network connection to get the internet to work.  For any help or suggestion would be greatly appreciated.

    Thank you.

    The solution for static buildup is to remove the battery and cord power, press and hold power for 30 seconds, plug the power cord and start. There is nothing in the Bios that will fix the keyboard. Your keyboard could be dirt in these keys or it becomes defective and must be replaced.

    On the wireless, if you have the Atheros AR5BWB222, many laptops have problems with this card. You can try to reinstall the latest version of the driver for it, but you must uninstall all older drivers.

    As much as it's been around for two years, is it possible, he got hit pretty hard one of the antennas is out.

    If yours has a t shaped door on the bottom, you can remove it to get to the Wifi card.

    Many people are replacing the card.

  • Wireless issues when it is docked

    I have a Dell E5540. I recently put in place to host after the dock for more than a year. The issue I'm having is that when the laptop is connected my wireless connection is going to almost nothing. Less than half a Meg.

    When I leave the dock wireless jumps to normal. Read about it, I found a 'solution '. If I open the lid of the computer laptop while its anchored my wireless is normal... close it... and his return to zilch.

    I think it's a setting somewhere, but so far, nothing works.

    Any ideas?

    Thank you

    Hi mcftlf,

    Thanks for posting.

    The antenna for the without wire is located in the lid, so when it is closed, it does not receive a good signal.  Opening the lid exposes the antenna to the area of signal more to pick up the wifi signal.  Best way to solve this problem is to use a wired connection, when it is docked, or open the cover.

  • dv6119us Broadcom wireless issue

    This has probably been answered in a previous post, so my apologies for asking again.

    I have a dv6119us with wireless broadcom internal to the pc card.  The wireless card disappeared from my device manager and I can no longer connect to my wireless network.  I have another laptop which connects to it without any problems.

    It's the second time this has happened to me, the first time that the pc was under warranty and HP replaced the card wireless free of charge (it was a hardware problem) now I have the same exact symptoms as last time, and I suspect the wireless card has not yet.  First card lasted 11 months before failing, and now the replacement, one lasted about 13 months... GRRRRRR

    Is there a way I can confirm the wireless card is turned without having to buy a new one to try first?  Also, if I need to replace the card, can someone tell me if I hae an option to buy another thing another Broadcom wireless card?  When I remove the cover of the card said to replace with HP spare 407159-001 wireless?  I'm looking for just something a little more robust than this card Broadcom even if I have to pay extra for it!

    Thanks in advance for the help!

    Take a read of thisBlog on the upgrade, installation and configuration of the cards for computer laptop mini pci wireless. There are a few options available to you as long as you aren't afraid to open your laptop. Of course, the changes are your own responsibility and guarantee goes out the window.

  • On the Satellite T130-16V wireless issue

    Hello..

    I have a nine T130... the problem is every time IM using the internet the auto adapter (realtek 8187se) wireless disable it yourself! After that, I have to restart

    So I allow her again.

    (I ve tried the Fn + F8 and tried to update the driver and bios update and reset it even system restore... name nothing!)

    Any ideas so I can solve this problem?
    I have win 7 64 bit

    Have you tried reinstalling the driver WLAN? The last time you can find the portal of Toshiba WLAN - http://aps2.toshiba-tro.de/wlan/

  • Tecra 8200 wireless issue

    Well, this is probably a stupid question, but I have a Tecra 8200.
    I have to buy something else for wireless work?

    Hello

    This question is not stupid ;) as the Tecra 8200 was equipped as an option with the LAN card internal minPCI. This could be a bit confusing.
    So in some units of Tecra 8200 WLan is already included in some Tecra s minPCI WLan card must be installed first to use WLan technology.

    You should check your device manager if a WLan module is listed in the network adepter
    If it s already registered then you n t need a WLan card.
    If it s are not, then you must upgrade the machine with the minPCI wireless network card or with a USB WiFi key.

    AFAIK the PA3070U-1MPC wireless mini-PCI card may be compatible with your laptop.

  • Wireless issue

    Well I just my Pavilion dvd5 1125nr and my wireless light is on. No physical button to push to turn to blue light. I searched help and support up to what I want to scream. Can someone help me please?

    have you chek on the management of the computer and go to device and Network Manager, adapters, you will see if you have two it means that you must activate it on some how is there is only one that means you must install the driver WiFi answer me when you chek who

Maybe you are looking for

  • OfficeJet 4620: tiny print

    My printer started printing real small size, to the point where it is difficult to read. It all started after I have my antivirus software for my desktop computer has expired, and my grandchildren were on it without my knowledge. I had my office serv

  • 0 x 643

    Cannot install Microsoft net framework 3.5 service Pack 1 and the net framework 3.5 family update for net verision 2.0 to 3.5 (kb951847) on windows xp

  • Download the file keeps freezing

    whenever I try to go to my downloads in my documents folder he maintains the gel and said that there was a mistake im not very good with computers even though I can usually gat by if someone could help me with this I would be very gratful thanks

  • The corrupt Trash: I get the error that the Recycle Bin is corrupted.

    I get the error that the Recycle Bin is corrupted.

  • Applications for BlackBerry Bold 9000 series blackBerry Smartphones

    Hey guys,. I'm pretty new here and a fairly new user of personal blackberry. So, please excuse if I break all the rules of this forum. I'll learn it! I have a question. I downloaded the application from Reuters and the facebook app on the BB, but I d