HP3520 (all-in-one) does not print all images on photo paper, cut up.

Using Mac OS 10, paper photo 4 x 6 printer configured using same-size paper. Image is printed OK, but 1 cm high, or so are cut. A few reasons why this is happening?

Thank you

Thanks a lot for your answer.

Indeed, while trying to print another 4 x 6 to copy on you, the printer worked well and there was no cropping at the two ends of the photo.

I think the original problem must have been caused by pulling is not the paper tray around before inserting paper photo 4 x 6. I think that I could not have made sure that the document was just behind. Because this time I used the tray properly and printing came out fine. I can't think of any other cause.

concerning

Hanumana

Tags: HP Printers

Similar Questions

  • C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

    C4580 all-in-one does not print the page Web of the internet explore 9 64-bit

    Message: Script error...

    OK if you use IE9 32-bit

    Latest version of the driver from HPupdate

    Same problem on 2 different PC - running Win7 Home premium, another the proff of Win7, both 64-bit

    Hello borisgit,

    As you have noticed one solution is to run IE9 in 32-bit mode. You can also try running the 64-bit version of IE9 as administrator to work around this problem.

    Script error when you try to print from Internet Explorer 9

  • HP Photosmart 3310 all-in-one does not print print test page doe but doesn't show is not black

    I have a printer all-in-one HP Photosmart 3310 that does not correctly print a test page (print color but not black) and does not print a WORD document from my computer.  The color that should be black in the test page after CLEANING print head appears as a Purple-ish Brown, although after the PRINTER SNAP the printed page shows a short BLACK bar to the left of the five longer bars in FIVE COLORS.  The computer in use is a HP Pavilion dv7 with processor Intel Core i7-3610QM, 2.3 GHz, Ram 8. 0 GB (7.9 GB available), 64-bit and Win 7 Home Premium OS, SP1.

    After having downloaded HP Print and Scan doctor, we arrived, after a series of steps to "If the cartridges have been refilled and none is empty, try calibration of color": Open HP Solution Center (start, all programs, HP, HP Solution Center), then click on settings, settings, printer Toolbox, printing on the tab device Services, click on color to calibrate.  This procedure is NOT AVAILABLE, however, because I can't find the HP Solution Center.

    What should I try to fix this problem?  Please be specific - and please also include any recommendations for a remedy that is exactly what happens if something must be verified or checked before trying the recommended remedy.

    Since the last post, I repeated the test several in Solutions of HP.  Whenever I have repeated the procedure clean print heads, improve the quality of printing in black ink a little bit.  After several passages of this test, maybe 5 or 6 more and separated by some rest of the time, the quality of printing in black ink has reached the State that I consider finally acceptable.

    A variable that I can't rule out or rule through all this is the temperature and the humidity.  It has been a winter VERY exceptionally difficult, with a lot more than zero days and subzero temperatures.  And with that comes challenges with the indoor humidity (even if we have the whole House humidification).

    In all cases, the printer now works without problem.  And I'll post that I accept the solution most recently proposed by the HP Forum.

  • HP photosmart c6180 all-in-one: does not print because some cartridges are empty

    I want to just print in black and white, but because some of my color cartridges are empty it does not print.  If I don't want to use the color why is it important?  Please notify.  I can't afford a new set of cartridges of color... and I don't want to print in color, so it shouldn't matter!

    Hello

    To protect against damage, it will not stop if no available in any ink cartridge. I need all the inks in the heating of the process.

    Kind regards.

  • HP Deskjet 3050 all-in-one: does not print copy or not

    A few months ago my printer has stopped printing. It print only the first line of the page and then spit out the rest of the blank page. At first I thought it was the program I was using because sometimes it would work in Word but not Adobe PDF, or vice versa. Now it prints even more than the first line, it just takes the paper and does not print anything on this subject. I tried:

    -Turning then in

    -installation of the driver more updated from the web

    -new ink cartridges

    -print a test page - that works!

    -copy - that does not work

    Another note:

    -I connect via a USB port to print

    Other troubleshooting tips would be appreciated, if not I throw and do not buy another HP printer again. Very frustrating!

    Hello there! Welcome to the forums @autley

    I read your post on the printing issues that you are facing and also how you can not make a copy. As you can not make a copy, it is a material concern. I have a few steps to offer you and if they do not fix the problem of the copy, please call us to see what are your printer options.

    Reset the printer, and then make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help greatly.

    Press the power button to turn the product on.
    With the product, unplug the power cord from the back of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord into the wall outlet.
    Reconnect the power cord to the back of the product.
    If the product does not light by itself, press the Power button to turn it on.

    Please try a copy from the front panel of the printer. If the working copies, please let me know and we can continue to troubleshooting of computer software. If the copies do not work, please call us!

    Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

    Happy new year

  • Adobe Acrobat DC does not print the images in point 8.1 of Windows

    I am trying to print a PDF document that contains 2 pages on the first page, there is a table containing information on the second page, there is an image that covers almost the whole of the page. However, when you print the PDF file, the first page is printed right on the second page it does not print anything.

    Any of you are familiar with this behavior?

    Thanks for your help.

    Hi borisdiaz,

    Open Acrobat DC, navigate to the Edit menu-> Preferences-> Security (Enhanced)-> disable Protected Mode.

    Also, try the solution mentioned in my previous comment.

    Kind regards

    Nicos

  • HP officejet 5610 all-in-one does not print one when it does print a map from 2 months ago.

    Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

    Officejet 5610 all-in-one will print no one when it does print a map of 2 months ago

    Who is this?  Do not print or print the old data?

    Under what circumstances does the former print job print (for example, after restarting)?

    Follow these steps:

    Open a command prompt window (start > run > cmd > OK)

    Type the following command and press ENTER after each line:

    net stop spooler

    del "% windir%\system32\spool\PRINTERS\*.*" [Y when prompted type]

    net start spooler

    output

  • 7510 photosmart e-all-in-one does not print

    I had setting successful place Photosmart e-all-in-one printer 7510 when I bought first. Super easy to install and I print wireless all the time.

    I recently moved and tried to uninstall and reinstall the printer so that I could print wireless again. I did exactly the same thing to install because I did the first time and it doesn't work. I went through all the steps help and may not know what the problem is.

    1. the printer is turned on.

    2. the printer is certainly connected to the network. No problem found on the wireless network test.

    3. my computer is not connected to a virtual private network.

    4. the computer and the printer are on the same network. Name of the network on the wireless network test is the same name of network connected to my computer.

    5. There is no firewall does not block the detection of the printer.

    6. the wireless router is not in a bad state of operation. If it were, I would not be able to get online, right?

    7. I do not use the 'connect a new printer' resettlement.

    8. I don't know that I downloaded the appropriate software drivers.

    I don't know what else to check. The only thing that has changed is the router and the internet provider. I got the same laptop before I move. Everything works fine print/scan when connected via a USB port.

    You're not the only one having problems with the SBG6580.

    Your internet provider has other available modems?  (not motorola)

  • HP Office jet Pro 8600: 8600 all-in-one does not print

    First of all, I'm very technically challenged...

    My printer is connected by radio to two computers. The two are not able to print anything. They have all two printed up to that we have a new computer in and then we worked for a little while and the other older. Currently, no work.

    Light on the port in the back where the ethernet cable is connected is in the lower part of the port and flashes intermittintly on top. The connection does not snap-in.

    It's probably a harware problem? Is there something I can do a simple test? Replace the port which can be done at Best Buy or other? The printer has 2-3 years and we loved so far... Thank you

    HI @Rosetree,

    I noticed that you are having problems printing to your printer HP Officejet Pro 8600. I understand that the problem started when you got a new computer. I would like to look into this for you today.

    We are considering the possibility that the new computer interferes with the IP address of the printer on the network. Let's see if we can identify the cause.

    I see that you mentioned in your message, wireless and wired. How is the printer connected? (Ethernet/WiFi)

    Here is a document that I recommend that you try, a view of the error "Unable to Find printer" for the HP Officejet Pro 251dw, 276dw and 8600 Printer seriess. "

    Try the HP print and Scan Doctor to identify and solve common problems when installing or using s HP on your home network. What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages).

    Note: You may need to follow this guide for both computers. I recommend following it all the way and then try to print from both machines.

    Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

  • Photosmart premium 3-all-in-one does not print black ink

    My C310 series 3-all-in-one hp photosmart print no black ink on the page.  The cartridge is new, and all ink cartridges are full.  The printer is 3 years, just one month out of warranty.  I downloaded all the updates, I'm sure and went to the website of hp troubleshooting page.  I followed all directions, twice and still no black printing.  Please help, I don't want to buy a new printer!

    Under Tools, I see only "Clean cartridges" not "clean print head."

    When I chose "Clean cartridges" twice, black ink printed!  Hooray! Once I have this post, hopefully get back to the page to say the problem is "solved"!

    Oh, while I have you on the line, while the cartridges were being cleaned, I got a message saying that I had to download the latest hp drivers, because those I have is not compatible with this version of Windows.  However, I download the latest drivers for 8.1 from your web site when I had a terrible paper jam.  After that I downloaded the latest drivers, this problem has been resolved.  But, given that I get this message re incompatibility, I need to re-download?  It was only a couple of weeks (up to three) that I downloaded the drivers.

    Thank you once again!

  • My Dell 926 printer all-in-one does not print in Vista

    I can't print my printer.... only the last page impressions and stops?

    Hello

    ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=PRN_ALL_A926&OS=WLH&OSL=en&CATID=&impid=

    You can also track information to try to solve your problems of printer below

    read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

    Solve printer problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

    and read this microsoft tutorial too

    Introduction

    This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

    How to use this tutorial

    For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  • Jet Office HP J4500 all-in-one does not print to mode copy of each system in power mode

    With the help of system of Microsoft Windows Vista (vanilla) on HP Pavilion desk top system worked well when initially installed but now will not print in copy mode do not have toolbars for printer on computer Office.  Not installed at the time of purchase.

    Just print a test page, and the information is incomplete and very low.

    Have 2 printers installed on this computer.  Has taken the path of least resistance and as long as old printer works have stopped using the 'new' printer.

    Any suggestion would be appreciated.

    From what you describe, there are two main things it could be. The print head is clogged or the cartridges are dried out.

    I would first perform print head cleaning in the Configuration menu three times.

    If your cartridges are similar to these:

    This means that you have a combined print/cartridge head. If after three cleanings is not to put ink on the page, I first recommend out the cartridge with a damp lint (like a coffee filter), clean the copper bumps on back (but not the nozzle on the bottom). Clean the suited connectors inside the machine while it is unplugged. Cases of failure to print now, your only solution will be to replace the cartridge.

    Because the cartridge that the above is a combined cartridge/print head, which replaces solve both the number one and two problems that cause this problem.

    Have a great day!

  • 6510 all-in-one does not print in black

    Hello

    So my off-warranty 6510 has started to not print in black. I bought this in August 2012, and it has been pretty reliable.

    Now it just won't print black. I searched through these forums and I feel like a big community now - I'm not alone with this problem.

    I did print without end cleaning of the printer head and my PC (until the option has disappeared!). Print head alignment failed. And I have replaced the cartridge.

    As it is not in warranty, I took the print head and gave him a * beep * clean. When he was replaced, it only printed a page in black (bad), then no more.

    Print in color if fine, except now (after that numerout head cleans) most of the ink levels are low.

    Stupidly, I expect a miracle and that a HP representative will respond and provide a kind of solution, but I think I know it's out of the dumpster. It'll be the 3rd death of HP printers in 4 years (the first 2 were replaced by the store - Costco).

    At least now that my stock of cartridges is exhausted, I am not bound to HP again as if I was the last time.

    Sort problem. Thank you very much for your support.

  • HP J4680 all in one does not print anything in black

    Equip the new hp black cartridge but printer will not align... and then, it will not print color as black.  So I tried an another new black print cartridge and the same thing happened.  I do again a new printer or is there a fix.

    Hello Jlang & DarciAllan,

    Please take a look at this document, which has steps that can help solve your problem, particularly to the utility section troubleshooting clean cartridge.

    Please let me know if this helps solve your problem.

    Good luck!

  • HP2540 does not print the last inches of paper A4

    All-in-One HP 2540 windowsvista

    I made the scanner to an A4 sheet which contains a drawing that covers the entire page.

    but the impression of this page are not printed the last inch of the design.

    Thanks for the help

    Hi Eugenio,.

    To receive the best information on what printer would work better for you, I would recommend cotacting HP directly.  You can use this Web site for information about how to contact HP properly, based on your region: contact HP worldwide.

    Thank you!

Maybe you are looking for

  • I can't open Firefox without restoring to an earlier version. I did a reset and updated, but whenever I close I have to restore a previous version

    When I try to open Firefox I get this message, the application could not start properly (0xc0000022). To open it, I have to do a restore to the previous version. A time to do an update and a reset, but neither helped. Once I close out I have to go th

  • Vista on Portege M400: mouse keeps blinking

    HelloI installed Vista Ultimate on a whole new Portege M400.The mouse cursor does not stop flickering. He replaces briefly about 2 times a second form the usual arrow of the 'blue circle', indicating a change of context.No idea why and how I might so

  • Satellite L670-1jQ - HDMI problem

    Hello I bought a brand new Satellite L670-1JQ especially for the blu - ray, HDMI output. I also have a screen 42 "flat with HDMI input jack.The meaning was to play a blu - ray on the laptop drive and transfer the video to the flat screen.When I conne

  • Re: size USB keyboard for Tecra A8

    Looking for a USB for a Tecra A8 with keyboard keyboard more like desktop computer; Delete key at the side of------and large locks cap key further away from the key. Other issues of layout is not a problem.

  • T530 Windows 8, cannot turn Adaptive dimming off

    I went thorugh these forums, but it seems that none of the solutions work on my T530 about try to disable adaptive dimming off the coast. I defined the characteristics of graphics power Intel to the 'sector' and the 'Maximum Performance' settings, th