HP4500 hp 6210: supplies provided with printer HP4500 and HP-6210

I need to replace a HP 6210 with a HP4500. The power cord from the HP 6210 has been connected on the system and I don't want to replace the cord that goes to food AC\DC (so no new connections to do). Can anyone confirm that the connection of the power supply cable is the same for both of these models?

For reference only, I don't have the thread of one of these printers in my hand, I do support work remotely.

http://thumbs.ebaystatic.com/images/g/gAIAAOSw-jhUEmAs/s-L225.jpg

Hi @Daxvid.

Welcome to the Forums of HP's Support.

I can confirm that the power cord for these units are not the same.

The 6210 is a much older printer with a maximum consumption of 60 watts.

Voltage 100 to 240 VAC (+/-10%), 50/60 Hz (+/-3 Hz)

Tags: HP Printers

Similar Questions

  • Need help with printing wireless and Air of printing

    I have a Xerox printer connected to an Airport Express station and I was able to print wireless from my Mac. I just replaced the Xerox with a Brother printer which has built in WiFi and Air feel, although I can't get anything to work. I entered my password WiFi network directly on the printer. The instructions had me download the drivers that I did and I download a wireless configuration program that asked more than about nothing if I already entered my password of the WiFi network of the printer.

    1. I do not remember how I already had the Xerox facility to print wireless from my Mac. I just plugged a USB cable directly linking the Airport Express to the Brother printer to bypass the built in Brother WiFi and use the Airport Express for internet.

    2. any thoughts on the use of construction vs the Airport Express WiFi?

    3. what should I do do AirPrinting work?

    Thank you.

    Post edited by: southwestform

    I use an Epson printer set up as AirPrint rather than as a brother, but I expect the two similar configurations.

    All I had to do first was installing the printer on my network domestic wi - fi.

    Then in system preferences > printers & Scanners

    Select Add printer

    Select the printer and set its AirPrint and add

    What printer model is Brother and in fact specifies that it is compatible AirPrint, or just a Wi - Fi connection?

  • Problem with printing PDF and PDF Maker

    Hello

    We have problem with our professional DC from Adobe.

    The first problem: print with Adobe PDF Converter result to the message with 'Interactive Service, window of change '.

    The second problem that we have with the PDF Maker. We can perfectly create PDF files with the add-in in Word, Excel and PowerPoint.

    In Visio and Project after creating PDF to send us a message "the Adobe PDF printer is not installed on your computer...". »

    We have this problem on three different customers. All customers are fully patched with Microsoft and Adobe.

    The desktop Versions are 2010 32-bit on Windows 7 64 bit.

    Thanks in advance for your help.

    Hi avaa90380721 ,

    Try to do the following:

    1 - Hold down the Windows key and the R key on your keyboard, type services.msc in the Run dialog box and click on enter.

    2 - image search for interactive services detection, right-click on it and select Properties.

    3. set the startup type to manual.

    4 - click OK.

    Then, try to print to Adobe PDF and check if its working very well.

    Let us know the results.

    Thank you

    Shivam

  • Problem setting up my iPhone, iPad with printer MFP HP 1213

    I have an iMac, MacBook Pro, iPad, iPhone 3, iPhone 4, iPod. Almost all have the iOS responsible henriq. I have also two HP multi function printers: HP LaserJet M1536dnf MFP so MFP HP LaserJet Professional M1213nf. Recently, I downloaded PrinterControl from the iTunes Store and installed on my iPhone, iPad etc. The above two printers are connected on two separate wifi networks. The 1536 printer when I try to connect to my iPhone, the iPad with PrinterControl I am able to print, scan and do everything. All handheld computers are able to immediately recognize the printer. Unfortunately when I try to connect to 1213 all-in-one that is located on another wifi network and is connected to a time Capsule I am unable to do so. The PrinterControl says "no printer found. On the other hand in all the devices of Air print feature is working perfectly fine. I can take my fingerprints of mail and it is recognizing the MFP 1213 easily and get the made impressions.

    Even after through many forums and discussion forums, I couldn't solve the problem. I contacted HP support and said I need to contact Apple support. I also tried and contacted the Apple support which in turn said that because the PrinterControl is a third-party application they will not be able to provide any help/support and Air Print being workinf fine then there is no problem with Apple products. Please help, how to reolve the question and 1213 HP MFP get well with Apple products.

    Hello

    I'm afraid that this behavior is expected because the M1213 is not supported by the HP printer control application.

    You can find this information listed for the HP LaserJet Pro M1210 Multifunction Printer Series within the category Printers HP LaserJet Consumer below:

    http://support.HP.com/us-en/document/c02814760

    Shlomi

  • problems with printer newphotosmart 6520

    I just buy this PRINTER AND IT PRINTS OKAY BUT don't MEET THE COMMAND COPY. It is ALSO IMPOSSIBLE TURN OFF the PRINTER. Any THOUGHTS?

    Hello

    As OEM HP is responsible for the good operation of the printer and their
    drivers provided. Check with HP support, their documentation online and
    drivers and ask in their forums.

    HP Photosmart 6520e all-in - One Printer - drivers and software<- set="" to="">
    version of Windows.
    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=5169041&LC=en&cc=us&DLC=en&lang=en&cc=us

    HP Photosmart 6520e all-in - One Printer - support and troubleshooting
    http://h10025.www1.HP.com/ewfrf/WC/product?product=5169041&LC=en&CC=US&DLC=en&lang=en&CC=US#.

    HP support/troubleshooting & drivers
    http://welcome.HP.com/country/us/en/support.html

    Contact HP
    http://welcome.HP.com/country/us/en/contact_us.html

    HP forums
    http://h30434.www3.HP.com/PSG/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Problems with printer after windows update on Vista

    I am running Vista Home premium 32-bit with SP1 and have an Epson SX215 printer. I have Noton antivirus installed.

    My printer will not respond after installation of recent updates. Remiain of items in the queue for printing and the caanot be deleted. I tried Mr. Fixit for printer problems, but it just crashes evenn after leaving 2 hours to run! I tried the system restore, but I just get a message saying "unknown error found no changes."

    I can solve the problem by resetting the PC to the settings to factory, but when I load these recent windows updates again that the problem comes back.

    Help, please!

    Hello

    What updates caused the problem to occur?

    Look for updates in the update history.

    a. open Windows Update by clicking on the button start. In the search box, type Update, and then in the list of results, click Windows Update.

    (b) in the left pane, click view update history.

    c. to display more information about an update, double-click it.

    I suggest that you realize the following methods and check if they help to solve the problem.

    Method 1:

    (a) click Start, go to control panel

    (b) select system and Maintenance

    (c) select administrative tools

    (d) double click on Services

    (e) in the services list, scroll down until you find one called "print spooler".

    (f) make a right clic on "Print spooler" and "restart".

    (g) "suppression" of work will be lost and all work queued in your queue will print.

    Method 2:

    I would completely uninstall and reinstall Epson SX215 printer driver package.
     
    a. open devices and printers, click the Start button, and then click the start menu, click devices and printers.

    b. right-click on the printer you want to remove, click on remove the device and then click Yes.

    If you can't delete the printer, right-click again, click Run as administrator, click on remove the device and then click Yes.

    Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    c. now, reinstall the printer . Note: Valid link also for Windows Vista.

    Method 3:

    If the above didn't help, restore settings PC and install the updates one by one and refrain from installing the update (although not recommended) which is the origin of the problem.

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • After the installation of Vista update, receive the error code 21 with printer software

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas

    Download update for 32-bit Vista because brother MFC3220C box to restart the printer says cannot start error box App Installer says error code ['C:\USA\Install\3220C\Inst32.exe'] 21. I added Vista Ultimate 32 bit. I went to the brother site and talked to technicians and as usual runaround says I need to update with the new printer (Yes, well, well, if I do it will of course not brother!)

    * original title - printing with printer Brother MFC3220C problem. When I install the update to run 32-bit Vista; I get to the part of the installation where I plug the USB cable and the printer software will block upward. I get a code on the reboot error code ['C:\USA\Install\3220C\Inst32.exe'] 21 *.

    John Walker

    You must get your drivers for your Brother printer if possible from the manufacturer.

    Anything here useful?

    http://welcome.solutions.brother.com/BSC/public/as/au/en/DLF/download_index.html?reg=as&c=au&lang=en&prod=mfc3220c_as&dlid=&flang=English&OS=74&type2=-1

    There is also a uninstall tool mentioned that you can use to reinstall through Windows plug-and-play.

    Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

  • LaserJet 1600: problem with printing on color laserjet 1600

    I just replaced all color cartridges, but the left side of the print is faded.  I cleaned it up, and I don a supplies status page.  black and cyan colors print correctly.  yellow - the left third of the color bar is faded to white.  Magenta hardly shows in color at all.

    any suggestions?  Thank you

    Problem running on this series with the Magenta.  Yellow it is possible also, but more than likey you have a bad toner.  See instructions attached on how to fix.  A lot of work but not so hard.  Usually I leave the track of wire black plastic which crosses the upper part as it is a bear to get back up and is not necessary.  A couple of tie wraps will do the trick.

  • Problem with printing photos on HP PhotoSmart 7520

    Montain Lion 10.8.1 operating system

    I want to print some black and white photos on plain paper in A4 format and each time it prints with strips of about 1.5 cm wide along the paper in different shades of black (e.g. pale and dark).

    I cleaned and aligned the print head, but the problem persists.  Even when I print the print quality diagnostics page, ITO shows the same bands on the color blocks.

    This is what it looks like:

    Can someone please

    Thank you very much

    Tolo

    Hi Tolo,

    Thanks for the post.  Good shooting T BTW.  If we are witnessing this kind of printing a diagnostic page internal quality, we can eliminate a problem specific file/SW, and given that the bands are very regular in spacing, I suspect either the print cartridge black (if make true black in grayscale) or the print head.  Additionally, make sure that you are using genuine HP supplies as re-filled cartridges can also produce this type of fault. Check the link below, it is very comprehensive but offers some excellent steps to solve these types of problems print quality and let us know the results.  Good luck!

    http://support.HP.com/us-en/document/c03369392

  • delivery of mail with 5510 e error - print. updates and connection are ok. a friend has the same problem.

    I checked all of the updates and connections for my new printer.  As far as I can tell, I've checked everything that needs to be checked and everything is good.  But I still have the error of mail delivery when e-printing.  And my friend has the same problem with his new b111a 5510.  What could be the problem?  Regular, printing, scanning, and so on work fine with my wireless connection.

    So looks like it's maybe a problem with the E-mail address provided by your internet provider, you send from,

    What I would say as a test is to create an email account with g mail and or yahoo and try to send the e-mail to your eprint/E-mail account and see if it accepts the email too, make sure you have your printer the value Accept e-mail for all users, you can do so by logging into Eprint Center and then enter these parameters and select this option

  • help with printing from a mac with OS 10.6.6 c4780

    I put my new C4780 printer until about 2 weeks ago and it worked fine via USB for about a week.   I couldn't figure how to get wireless working, that's why I bought the printer, but that's for another post.  Last night, it came into fashion 'impression' with nothing happens.  It is with a small doc page it was printing fine last week.   The news indicated printer status window as the 'impression' and the info above indicate "sending data printing... "but nothing happens at all.  I followed the only statements on this topic in the guide provided with the printer - for macs, which is to uninstall the software and then reinstall the software.  OK, boring, but I did it.  And nothing has changed.  :-(please help.  I already threw away the box, since it worked last week, so cannot return. Help, please!

    AH - an update - the file finally printed.  Summary of job info displays the file was sent today 09:13 and ended today at 17:51.  And it was doc word a2-page without numbers or pictures!   Help, please!

    OK, cross in system preferences of the Apple menu in high to the left of your screen.

    If you are using Snow Leopard and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the HP software on your Mac before you upgraded), you must uninstall the software by using the "scrubber":

    Go to Applications/Hewlett Packard / click Uninstall HP
    Click on continue
    Highlight your device in the left pane
    Hold down the Ctrl and Opt Cmd and click on uninstall
    There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
    Click on continue and let it finish

    Restart your Mac

    Now run a software update.

    Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

  • Y at - it an inksver that is compalible with windows 7 and want to HP 4500 printer.

    Can someone tell me if there's an inksaver i.e. compalible with windows 7 and HP envy 4500 printer please I got is not compatible with this printer.

    Original title: Elflynx

    Hi Elflynx,

    Thanks for posting your query on the Microsoft Community.

    There is no such an application of Microsoft as inksaver. You will then get in touch with HP support , or need to check on your favorite search engine for any third-party application to perform this task.

    Note: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

    Kind regards

  • W7-64 bit - problem with printing on HP PSC 2110. It is not possible to find a driver.

    I just got a new computer with W7-64 bit operating system. I have connected my "HP PSC 2110 - all-in one print" through the USB cable, but I was not able to print documents.

    (a) when I try to print a document asking a boks popup on "add a printer".

    Then I go to the area 'Units and printers' to add the printer "HP PSC 2110'. The printer is displayed with an icon (if fare, fine)- but there is a yellow triangle with a '! ' which indicates something is wrong with the printer.

    In the status line: "Troubleshooting must take place" (freely translated from Danish) - I run the process, that identify that there is no driver installed for "HP PSC 2110" problem.

    Problems suggest to fix this - after a troubleshooting process says the problem: "There no driver for the series of Hewlett - Packard PSC 2100" is not resolved.

    What can I do next - any suggestions?

    (b) otherwise, I also tried to follow the process described on HP's own page:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796879&lc=en&dlc=en&cc=us&os=4062&product=79488&sw_lang=#N248

    But I can't get it to work.

    ---

    I hope that there is someone who can help out me.

    Is there a driver for PSC 2110 provided by HP, which provides printing and basic scanning capabilities.  It is distributed through Windows Update and usually installed as shown in the previous links. There are some measures that can be out of order in the page of HP describing how to apply the driver - to succeed, he must have Windows Update turned on before connecting the USB cable.  Windows Update turned on, as shown in the section titled "Configure Windows Update to automatically search for updated drivers". Click on the title to expand that section and show directions.

    Alternatively, you can manually check to see the driver as follows: go to the folder, devices and printers, adding a printer, choose a port, such as LPT1: temporarily, following and when the list of printers, click Windows Update in the lower right.  A connection high speed, it will take several minutes to reload the list.  When the list is full again, select HP as the manufacturer (not HP), the driver that you want is the series HP PSC 2100 to the bottom of the list.  If this driver appear correctly cancel the current installation and then reconnect the USB cable and everything should happen automatically.

    If for some reason you can't use Windows Update drivers you can also download the driver site catalog of Microsoft.  It will take that you use Internet Explorer as your browser and you will have to manually find the driver you need that research does not directly limit the results of my architecture.  For your x 64 system you want the file 11.6 Mb from this page.  Download the file and extract it to a temporary directory, and then click Add a printer, disk and point to the driver to add it to the list, and then connect the USB cable.

    BTW, I have your answer as to answer because 1) you didn't yet have an answer and 2) when a message is marked as being people responded with answers are less likely to open, but other users looking for answers will be unmarked.  This would tend to frustrate you and them :-).

  • problems in networking so that a pc has password which is attached with printer to print.

    I faced a problem in my network locan print, my printer is connected to a system with windows XP and there are 7 network system, only 2 PCs have windows 7 others have XP, but the problem is that, 2nd system prints the document when I gave impression test, coz 1 pc window7 password , but when I remove this password for user accounts, the 2nd PC 7 window give the characters correctly, if you have any solution tell me

    Hello

    Password sharing is enabled by default for computers of working groups. When password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer. There are two ways to enable file or printer sharing.

    I suggest to follow the steps provided and check if it helps.

    a. Open advanced by clicking the Start button, then on sharing settings Control Panel. In the search box, type network, click network and sharing Center, and then in the left pane, click change advanced sharing settings.

    b. expand the home or work network profile.

    c. under the password protected sharing, click turn off password protected sharing, and then click save changes.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

     

    For more information:

    Share files with someone: http://windows.microsoft.com/en-US/windows7/Share-files-with-someone

    Share a printer: http://windows.microsoft.com/en-US/windows7/Share-a-printer

    Hope this information is useful.

  • I have an event soon wishing prints 4 x 6 given to participants who has a logo provided in one corner and my title generated through the lower part of the rest of the impression. I was able to save the logo and title separately in the identity plate, but

    I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event? I'm not WiFi devices yet so I intend import to Lightroom from the SD through my Macbook card and then wired to an Epson photo printer. Test prints I have the air out well with the box logo or title across the lower part, but I really need both on prints for my client. Thank you.

    alanh9307519 wrote:

    I soon got an event that wants only the 4 x 6 prints given to participants at the event with a box of logo provided in one corner and my title generated through the lower part of the rest of the impression. At this point, I have both registered in the identity of the Lightroom print module plate and tried to get them in place on a model. He wants me to place one or the other on the model in the picture, but not both (which I need). How can I get both on a template and then save this model so I can just pull up and start shooting prints during the event?

    Why not use watermark custom logo and him custom identity plate for the title in the LR print module? You also have the option to add the title at the bottom of the image using 'Photo Info' selection "Custom Text". After installation, you can save this as a new model. Unless I'm missing something, it should do the job.

    Instructions for both here in two separate videos: identity plate "Julieanne Kost's Blog of »

    Here is an example with three used:

Maybe you are looking for

  • RadyNas Duo RND2150 - RAIDAR

    Hello I received an email suggesting that I upgraded to 4.2.28.. I am on Windows 7 but I have not installed RAIDAR. I think I forgot to install RAIDAR when I build the PC some years. Should what file I use and how do I reinstall RAIDAR? Thank you Dav

  • The use of HP34401A in LabView gives 1073807343 error code

    Hi all I used the Example.vi HP34401A of the read-only to read data from HP34401A.  However, the following error occurs, "Error-1073807343 is is produced when opening VISA in HP34401A Initialize.vi-> Untitled 1 Possible reasons: VISA: (Hex 0xBFFF0011

  • Cursor jumps all over the place as I type

    Hi, I have an Acer Aspire laptop computer 5733Z and most recently, my cursor jumps around while I type.  Anyone who has encountered his problem and if so, is there a solution?

  • Spectrum X 360: New spectrum X 360 does not turn the screen into tablet mode

    My spectrum is only two weeks old and works wonderfully as a standard notebook computer. However, I cannot get screen to turn when I select tablet mode or Flip on the stand of entertainment. All the research online, I can find are people who used Win

  • WET54G

    Hi, I have an old router 4 ports (pre-configured operator ISDN) without wireless interface. Is it possible to have 2 wet54g communicate together? router wet54g wet54g 4-port hub ethernetcomputers And if yes how to set up? Thank you in advance. Best r