HP4500 scanning problem

Similar Questions

• M1212nf mfp scanning problem

  Scanning problem

  My printer recently started having problems with scanning.  I start a scan.  He is busy for a long time and then fails informing me that HP LaserJet Scan has stopped working.  When I type the guest Cancel Windows, the printer still displays the message "Scan to PC" forever.

  I tried everything, including the scanning print doctor PC, which fails also in the same way, reloading drivers, firmware etc.  Sometimes I get a message "unable to communicate with the printer.

  I can print and photocopy.  It is connected via USB.  No hardware problem does appear in Windows.

  Help?

  Hello

  A defective cable can affect much more than the impression, as scannign consumes much more energy to make the connection by comparing standard analysis printing.

  However, what happens when you try to scan from Windows Fax and Scan?

  I strongly suggest such a you already reinstalled the software and a bit checked any possibility that the relocation of the software already.

  Please let me know the results,

  Shlomi

• C5580 - scanning problems - how to scan?

  When I press the Scan button on my all-in-one, it is said: "scanning problem: try running the scan of the computer." Refer to the documentation for more information. »

  But how to scan from my computer? I open the HP Solution Center, and the only option is 'Print of Photos' or 'Share of Photos.'

  This article tells me to go to the "analysis settings" in the HP Solution Center. I have no "analysis settings" in the HP Solution Center. If I click on settings, I get the print settings and other settings (which resemble internet connection parameters)

  http://support.HP.com/us-en/document/c01391654

  I'm on Vista Home Premium and I connect to my C5580 Bluetooth. Fine, I can print. Just can not scan to the computer. However, I can scan to a SD card.

  Any suggestions?

  Seems that you have connected the printer using Connectivity Bluetooth.Bluetooth is only for printing and scanning will not work. You will need to connect to the printer with the USB cable to analyze correctly.

• Failure of HP4500 scan wireless all-in-one

  HP4500 all-in-one wireless worked fine for about 6 months.  Now when I turn it on I get a message saying "Scanner".

  The functions of printer failure - cannot scan, copy or fax"work very well.

  Tried once more to do a reset.  Still no luck with the scanner.  Looks like it's really a hardware problem.  Call the sipport line.  printer was purchased 01/20/12, so it should still be in warranty.

• Scanning problem

  I recently bought a Macbook Pro 13 "retina.

  I have HP Laser Jet MFP M1005.

  He acknowledged for the first time when I connected my printer on my mac with USB cable & I am able to take fingerprints.

  It is scanning. The Mac does not have the ability to scan the section printer & scanner.

  Kindly help me to solve this problem.

  the scanner is not compatible with your macbook: scanner HP not recognized by MacBook Pro 17 "2010 "

  I hope this helps.

• HP Deskjet 2645: 2645 HP scanning problem

  After upgrading to Win10, I can't perforom scan from the device control panel.

  The computer and recognized by the device (Picture1)

  

  However later on the (image2) error message appears

  

  The analysis can be performed on the computer, so it seems that all physical connections are clean.

  Thanks in advance

  Please come back to me @Boris-K.

  I checked with a colleague at work and manage to Scan option should be available to scan the computer. So it looks like not properly installed software because you are missing this option. You don't have to 'Manage the Fax settings' option that is available.

  I have provided with steps to unlock the hidden administrator account and the installation of the printer on this account to see if this will help this situation.

  Unplug the USB cable and run the uninstall: uninstall the printer software (Windows).

  Note: Do not connect the USB cable until you are prompted during the installation.

  • Go to your Start menu and in the box "search programs and files", type CMD.
  • CMD will fill as an option to search above, just right-click on it and "run as Administrator".
  • Once opens in CMD (command prompt), type net user administrator / Active: Yes and press ENTER.
  • Then, close CMD and then restart your computer.
  • When your computer is on the newspaper in the new account which should show. It will be called Administrator and will not have a password on it.
  • If your computer automatically connects to your account after the restart then go to your Start menu and click on the arrow next to 'shutdown' and choose 'change user '. Now log on to the administrator account, that we have just released.
  • Under the administrator account, install the printer software: HP Deskjet Ink Advantage 2640 All - in - One Printer full feature software and drivers series.
  • Test the printer.
  • To disable the Admin account start at step 1 and type net user administrator / active: No..

  If you still experience this issue, it may be the user's profile. Create a new user and try to install the printer on this account.

  • Open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.
  • Click on manage another account.
  • Click on create a new account.
  • Install the printer on this account.

  Let me know if that solves the problem. Thank you!

• Multifunction color HP LaserJet Pro 200: Scan problem tray

  I'm having a problem with the scan on the all in one tray. Basically I never scan A4 paper (wireless), but once the data transmitted from the printer to the pc, I find that the PDF version on the screen is too long. I then have to manually crop the size down to A4. It might not seem that a huge problem when say you scan one or two pages, but when you have a whole pile of documents to download, cropping manually each size takes a lot of time. The scanner never used to do this, it's past numbers. I'm using the wrong settings or y at - it something wrong with the scanner itself?

  Well, this should solve your problem:

  Make sure that the printer is plugged directly into a wall outlet, not a surge protector.

  1. Open HP Scan.
  2. Click on the gear icon.
  3. Click on the harvest.
  4. Select A4.

  Please let me know the results after following the above. If you can properly analyze, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• HP 6700 premium Windows 8 scan problem

  Hey there,

  I bought this printer/scanner/fax machine and hung

  I have 3 computers on this network including 2 who are windows 7 and one of them is windows 8

  printing and remote scannen 100% run on windows 7

  but the laptop Windows 8 only printing works and remote scan is not.

  is it a problem to know and if so is it a work arround?

  Respect for the King

  Fred

  Wel then jerends it works!

  now I need to know what service blocks analysis remotely from the hollow whent all the list and it was working when I turned off most of the services...

  HE FINDS! : it seems to be the services.what of logitech process monitor that has to do with the printer or anything about network I don't know... but he he

• HP Envy 5642: Scanning problem

  I get the following message:

  HPScan has stopped working.

  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  What should I do to continue scanning?

  Acts of the scan like any doctor is difficult and said he scanned, but when I try to do a scan test the above message appears.

  Hello
  
  Thank you for using the HP Forums.
  
  Please uninstall and reinstall the software COMPLETE features, follow these steps:
  
  1 uninstall the software from your computer
  2. download and save the software COMPLETE features (do not install online)

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  3. install the FULL feature software "saved".
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps!

• HP Photosmart Premium 564: scanning problem

  I get the message "try to start the scan of the computer. Refer to the documentation for more details "when I try to scan. Previously, the scan would go directly to the computer, but much more complicated now. How to fix?

  Hello
  
  Thank you for using the forum. You can try the following:
  
  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem
  
  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU
  
  Hope that helps.

• HP Officejet 8600 more print and scan problems

  Hello

  I had my HP officejet 8600 more for 2-3 years and always had problems following and just kept reinstalling the drivers as a quick fix. I am now starting a business from home and I have no time to deal with printing and scanning the questions and, of course, my warranty has expired! My operating system is OS X version 10.9.4.

  When I scan to my computer, the printer indicates "not found computer." The status of my mac is no different than when I scanned a document a few days ago! Remove and reinstall the drivers solves this problem temporarily but I want it fixed permanently.

  In addition, when printing, sometimes a page can print immediately and at other times, it may take 5-10 minutes to print even if its status is 100% full in the print queue - even once, reinstall the drivers is a quick fix but I want a permanent solution.

  Any help to solve these problems would be greatly appreciated.

  Thank you very much...

  Hello Hello!

  I thank very you much for getting back to me! Glad to hear things are working at the moment! Please take the time to click the button of "acceptable Solution", while others may see this post and they can get a fix quickly. Also if you want to say 'Thank you' click 'Bravo '. I would really appreciate one or both of these actions because it makes things easier for the new people on the Forums to get help fast.

  Have a good!

• HP scanning problem!

  Hello, I had a problem with my printer HP analysis feature. I have a HP Deskjet F4400 series, and I bought it less than 2 weeks ago. When I scan a photo, document, etc. I have the file sent to a folder in my documents. When I go to open this folder, the digital file is not there. Then I returned and scanned another 2 times, and the file is not there. I even tried to change the location of file scanned on my desktop but it stil isn't here. I even tried to uninstall the HP printer software and reinstall them and scan the image, but I still cannot find the file. Any suggestions? Need help please, I spent the last 3 hours trying to figure out and nothing good turns.

  Hello

  I believe that this document supported will help solve your problem scanning, please click here.

  I hope that would help you!

• HP - scanning problem solution Center

  I was in the middle of the digitization of images in a Word 2010 by using my HP6310 all in one document. After scanning a selected section of a page like I did several times, I got a message saying:

  "An internal error occurred during the processing of the document. Click OK to close the program and then try one of the following values:-restart the program. -Restart the PC and then try again. -Reinstall the software photos & images and try again. »

  I tried to close and restart the HP Solution Center and the word. I tried scanning in a new Word document. I tried to restart the PC. I've updated the software of HP. In the process, I found and downloaded the HP printer Diagnostic tools. When I ran the Scan doctor, I got a message saying:

  «Center of solution error: your system needs an update to fix this Solution Center error.» Click on the "Get Update" to download the update. Once the download is complete, run the downloaded file to update your system. »

  However, when I clicked on "Get Update", I received the following message: 'could not open the page. The service or the information requested is not available at this time. Please try again later. (Error: system-websrv_unavail) »

  I tried to restart several times over a period of several hours.

  Before this problem in his set, I started to receive error messages when I tried to save the Word file containing scanned images. The messages said that I could not save due to a file permission error. The message does not always appear, and I found I could work around the problem by using the function save pennies on the file tab. I don't know if these two problems are related.

  I am using Windows Vista 64-bit.

  Hi @CL-HP

  There are indeed a few updates available, which may be necessary; However, I think it would be better first to perform a full uninstall, then reinstall the software, then look for the necessary updates.

  1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
  2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
  3. The new software - uninstall the printer software Instructions
  4. Once the uninstall is complete, reboot the computer
  5. Follow these steps to reset the registry settings and options for Windows Installer.

• HP OfficeJet Pro 8600 Plus - ADF scanning problem

  Hello

  I recently bought this printer and used without problem for almost 2 months. However, right now I am struggling with the ADF.

  When I put a document to scan by ADF, I have a thin, black line on re-impressions. It is on the right side of the page, starts from everything at the top and goes down all the way.

  I have even if it is a kind of alignment line (you know when we write try, or its composition, leave us space on both sides)

  This problem does not exist when I scan and print documents of old school way, aka analysis usual. Only the ADF documents'ed have this problem a little. (The thin black line on things reprinted)

  Any recommendations?

  Best regards

  Update: I did what jason_h suggested in step 1 and it worked, this can be closed:

  http://h30434.www3.HP.com/T5/scanning-faxing-and-copying/HP-OfficeJet-Pro-8600-plus-ADF-copy-scan-line-down-length-of/m-p/2942099/highlight/false#M69757

• C4480 scan problem after installation of Snow Leapard

  I can't scan using C4480 printer after installing Snow Leapard. When I try to print message pops up saying communication error.  How can I solve this problem quickly.

  Please provide a rapid response