hp450c media in an attempt to feel measured error

Similar Questions

• Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no dound I did a windows update, but no sound came through, please help me

  Now, I have no sound on my lapt top having a media player to "check the drive for errors" and laptop have no d

  the sounds I made a windows update, but no sound came through it please please help with a link to something. Re, I did check the drive for errors and still after it again all the sounds left my laptop which is a vaio song

  Thanks for any help

  Hi, Pantha9,

  What version of Windows are you using?

  Start > right click on computer and select Manage

  Select Device Manager

  Click on the + next to sound, video and game controllers

  Right-click on the driver and select uninstall

  Restart the computer and Windows will reload the driver

  New attempt of his

  Access the site of the factory and search for driver updates

• Windows 7 my the media game is slow and still the error who say it has stopped working

  Original title: help me please

  my set of media is slow and still has the error who say that it has stopped working

  Hello

  1. What is the accurate and complete error message you get?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to perform the following troubleshooters.

  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Open the troubleshooter in the Windows Media Player library
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Method 2
  If the problem persists, disable and enable Windows Media Player
  
  Step 1: disable Windows Media Player
  a. Click Start, type optional features and press ENTER.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  
  Step 2: allow Windows Media Player
  a. Click Start, type optional features and press ENTER.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

• Media center problem with Qosmio G35-650 - error message

  Hi all

  I have a problem with media center on qosmio g35-650.
  When starting live TV, an error message is displayed and written "enforcement failed Please restart your computer again. If the problem persists contact again with your hardware support"
  It worked yesterday and today, something happened.
  Also, there is no tv signal available. Is this a hardware problem?

  concerning

  CEM mete

  Hello

  It's not easy to tell if it s a hardware or software problem.
  You can check for certain shortcomings Device Manager.
  If there is no yellow exclamation mark then I recommend reinstall the driver first.

  But on the question: did you run the MCE?
  In such cases, you can try to restore the operating system to the beginning.

• Measurement error of the County of edge by using the external sample clock

  Hello

  I'm trying to measure the number of edges (rising) on a square wave at 5 kHz with a generator function on a device of the NI PCIe-6363. I configured a channel of County of front edge of counter at the entrance of the PFI8 device. I use an external sample clock that is provided by the output of the meter of a NI USB-6211 housing channel. If I acquire for 10secs then ideally I would expect to see a total of 50000 edges measured on the meter inlet channel. However, my reading is anywhere between 49900 and 50000.

  When I use the internal clock of time base to measure the edges, the measure is accurate and almost always exactly 50000. I understand that when you use the external sample clock, the precision of the measurements is subject to noise level of the clock signal. However, I checked the clock signal is stable and not very noisy. Any reason why there is an error of measurement and how tolerance should I expect when using an external sample clock compared to when you use the internal time base clock?

  Also, what is best clock Frequency (with respect to the frequency of the input signal) when using an external clock?

  Thank you

  Noblet

  Hi all

  Thanks for all your sugggestions. I was using an input signal with a function generator which had a range of 8V. It turns out that the reduction of the amplitude to 5V solves the problem. I was able to get accurate numbers with the 6211 external clock.

  Thank you

  Noblet

• Period measurement error 20308

  I'm trying to measure the period of a very slow rate (Hz 0,083) to come to my DAQ (6009).

  However, it comes with "error-20309 occurred at the" NI_MAPro.lvlibulse measures 1 chan.vi:2 "when it is called of" NI_MAPro.lvlibulse measures N chan.vi:1 "(waveform index 0 1)". "

  DQA captures method is set on "on demand" however I also tried various (frequency + buffer) such as 10 k by 2 k.

  but it always comes up with the error.

  I know why it comes up with this error but do not know how to fix it.

  I have attached the vi (the signal to simulate reply my DAQ)

  Because you'll probably want at least 2 cycles whole to your measurements, and each cycle lasts approximately 12 seconds, I would get 25 seconds of data at 50 Hz (1250 samples)

• Media Center does not download information Guide - error during the processing of the data

  Media Center displays an error saying I need to look at the log of update, but I can't find the update log. Try to download the Information Guide to hand does nothing.

  Of your last log its connection and download the guide, so there is no connectivity problem as stated above.

  Try clearing the guide and the tuner configuration data and set up once again and then check if the guide updates correctly:

  1. close Windows Media Center if it is open.

  2. go to Start , type services.msc in the search box and press ENTER.

  3. look for the following services and check the status field, if they are started and then right click on them and chose to Stop:

  ·         Windows Media Center Receiver Service

  ·         The Windows Media Center Scheduler service

  4 open tasks now CTRL and SHIFT Manager, and then press the ESC key.

  5. click on the processes tab, then click on Show processes from all users .

  6. in the list, click the name of the Image to sort by name, and then look for the following:

  ·         ehmsas.exe

  ·         ehrecvr.exe

  ·         ehsched.exe

  ·         Ehshell.exe

  ·         ehtray.exe

  ·         mcGlidHost.exe

  7. in the case of imperfections, right click and choose end process.

  8. go to start, in the search box, type the following path: C:\ProgramData\Microsoft\eHome

  9. find and delete the file mcepgX-X - X.db and X-mcepgX-X file

  After that it's over, go through the configuration of the original tuner once again and check if the guide updates correctly.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• unexpected Windows media player could be due to configuration errors

  When I play any radio station or show, I can't here interference of music and talk very little. It can be picking up music besides. More on a radio station, its low loss?

  Thank you

  Hello

  1. what version of Windows operating system you are using?

  2. do you get any error code or error message when you try to start the radio?

  3. you remember changes to the computer before the show?

  4. have you tried stream with Internet Explorer Radio?

  You can try the following methods and check if it helps.

   Note: The following troubleshooting applies to the Windows 7 operating system.

  Run the troubleshooter in Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  Refer to this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  You can also visit the following links and check if it helps.

  Listening to the radio on the Internet with Windows Media Player: http://Windows.Microsoft.com/en-us/Windows7/listen-to-Internet-radio-using-Windows-Media-Player  

  Stream your media over the Internet using Windows Media Player http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-over-the-Internet-using-Windows-Media-Player   

  Stream your media to devices and computers using Windows Media Player http://Windows.Microsoft.com/en-us/Windows7/stream-your-media-to-devices-and-computers-using-Windows-Media-Player  

  Listen to the radio on the Internet with Windows Media Player http://Windows.Microsoft.com/en-us/Windows7/listen-to-Internet-radio-using-Windows-Media-Player    

  It will be useful.

• To configure Group policy so that after 5 invalid logon attempts computer display an error message indicating that the account is locked out for 30 minutes

  Original title: function or Vulneralbility? [Lock Group Policy]

  Hello world

  I have Windows XP Service Pack 3 with automatic updates turned on and the protection in real time against malware.

  I use Group Policy to configure for my computer account lockout policy, indicating that the account is locked by 30 minutes after 5 invalid connection attempts. I also use the TweakUI Autologon feature. (you can ask why the account lockout is necessary when automatic login is turned on?) Hold on...). Please also note that the feature of quick change of user on my PC is off, too. (but I still use the Welcome screen)

  So, when I have already connected, press Win + L to lock my workstation. Now, I begin to grasp things at random to be used as password. So that after a few failed attempts, the system displays: "cannot open a session because your account is locked. Please contact administrator.

  However, when I entered the correct password now, the system will always connect.

  I don't know if this is a feature of Microsoft Windows or a vulneralbility.

  More information: my computer is NOT a part of a domain, it belongs to the "MSHOME" workgroup and has file and printer sharing.

  Any help is appreciated.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited on the TechNet community.

• Try to install the Windows Media Player plug-in and receive an error message "could not find the environment Option that was entered? How can I fix it?

  I can't watch the video of MSN homepage.  The Device Manager in the Control Panel also gives me same error message.  Any help would be appreciated.

  Hi bears Beltran.

  1. what browser do you use for viewing?
  2. What plugin you are trying to install?

  Method 1
  I suggest you to run the fixit from the following link:

  Fix Windows Media Player video and other media or http://support.microsoft.com/mats/windows_media_player_diagnostic/ question library
  Method 2
  I suggest you to scan SFC. Scan SFC will replace missing or damaged files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 3
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Method 4
  I suggest you try the steps from the following link:

  The video problems when you use Internet Explorer
  http://support.Microsoft.com/kb/2532294

  Additional information:
  Plug-ins for Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

• Windows Media Player 11 Rip - Vista Home Premium error

  I have the same problems others have with my Media Player.  This problem started not until I installed updates to windows.  I have updated to service pack 2 and Internet Explorer 8.  I tried system restore but my most old restore point was only a week before my problem and did not help at all.

  Here's my problem exactly how it goes:

  I put a cd Ripper.  He begins ripping automatically the first track automatically.  On all the remaining tracks, it says "pending" in the status of rip.  After extraction of about 20% of the track, he spent the "ripping" to "error".  Then, all other tracks are from 'pending' to 'error' and ejects the cd.  I tried all combinations of bitrate and the type of file format and nothing seems to work.  Also on some of your answers on this forum your told us to go to the page Windows VISTA Media Player 11 download to download, but when I click on the link http://www.microsoft.com/windows/windowsmedia/download/AllDownloads.aspx , DOES NOT give you the option of Windows Media Player 11 for VISTA, only for XP and earlier windows platforms.  I even tried to download one for XP and I got an error saying something like that I have a newer version and that you can't use that one.  Anyone can solve this for me?  I was able to copy CDs to the 31/08/09, since these windows updates seems to have screwed something.  Are there bugs in these new updates of compatibility issues?  Help!

  Don

  Hello SavatageFan, welcome.

  Out of curiosity, have you tried ripping the content to another computer? The disc itself is possibly corrupt.
  Another option you can try is to manually copy the contents of the CD to the hard drive and play back locally. That would reduce the possible causes.

  In addition, what happens if you try to read all the content? Never introduce error messages or jump?

  Let us know,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 - Media Player 12 problem - won't open - error "Server execution failed".

  Hello

  I have trouble with WMP 12 on Windows 7. Whenever I try to open the program, the window opens, but it is completely insensitive and greyed out. I can close it in "End task" in the Task Manager.
  When I try to open a file, for example a video, I get the C:\User\Public\Videos\Filename.wmv error message
  Server execution failed
  Previously, I was able to remove the library to solve the problem. Nothing I did worked this time.
  Any help or assistance would be greatly appreciated that Windows 7 was not a very good experience for me so far!

  Kind regards

  Jonesyboi

  Hi Jonesyboi,

  Welcome to Microsoft Windows 7 answers Forum!

  Lets first try these two methods of troubleshooting and check if it is resolved.

  Method 1.
  1. click on start and in the search bar type cmd.exe
  2. right click on cmd.exe and click Run as administrator
  3. in the command prompt, type the following command

  net localgroup "Administrators'"NT Authority\Local Service"/ Add

  4. press on enter and restart the computer
  

  Method 2.
  Uninstalling and reinstalling Windows Media Player:
  Step 1.
  Uninstalling Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. search for multimedia and uncheck the brand in the face of Windows Media Player.
  4 restart the computer
   
  Step 2.
  Reinstall Windows Media Player:
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and place a check mark in front of the Windows Media Player.
  4 restart the computer.

  Try to read the file now.
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.
   
  Visit our Microsoft answers feedback Forum.

• Windows media player burninhg music to a disk error "connect a burner and restart the player."

  I have music in the list pane (the pane on the right side of the Player library). The start of the burn button is grayed out. below it says connect a burner and restart the player. How can I burn a cd?

  Hello

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows/burn-CD-DVD-Media-Player#1TC=Windows-7

  ImgBurn is a free software

  http://ImgBurn.com/

  You will find here burning guides

  http://Forum.ImgBurn.com/index.php?/forum/4-guides/

• Windows Media Player doesn't recognize the phone error"is not a connected device: for synchronization

  For months, Windows Media Player recognized my Samsung Galaxy SIII without problem. For weeks now, however, he is not picking it up. My computer detects the device when I plug it in, and made my phone. But when I try to sync the music on my phone, Windows Media Player says that I don't have a device so sync is not an option. In addition, there is no option in advanced settings on the Synchronize tab, so I have no idea how to solve the problem. Manual and automatic synchronization does not work.

  Hello, Olivia,.

  Thank you for keeping us posted.

  Even if the phone is recognized on the computer, sometimes bad or corrupted SD/flash card card can cause this kind of scenario on Windows Media Player. Try to disconnect the SD card and check if the Player sync with the phone. Also check if another device appears under the list of devices in Windows Media Player. For troubleshooting, you can also uninstall the software of the phone (Samsung kies) and reinstall them.

  Please let us know if the problem still persists.

• I feel oxc004e003 error after reformat and reinstall my Windows 7 Professional x 64

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - MV8MH - 98QJM-24367
  The Windows Product Key hash: wgci5Gdejx4esg7 ++ zTOe3LWF + 4 =.
  Windows product ID: 00371-OEM-8992671-00437
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {40F505AC-ED2B-4CB1-A813-F73A1DBF31A1} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130318 - 1533
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {40F505AC-ED2B-4CB1-A813-F73A1DBF31A1}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-2436700371-OEM-8992671-004372S-1-5-21-1693742574-1474284470-4201000383LENOVO42876EALENOVO8DET68WW (1.38)20130411000000.000000 + 000C76E0400018400FE34090409China Standard Time(GMT+08:00)03LENOVOTP-8 D 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: 50e329f7-a5fa-46b2-85fd-f224e5da7764
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00178-926-700437-02-13321-7601.0000-1542013
  Installation ID: 001825076160158560639733189491702896903512633632377784
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: 24367
  License status: initial grace period
  Time remaining: 42540 minute (s) on (29 day (s))
  Remaining Windows rearm count: 4
  Trust time: 03/06/2013-15:28:52

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 6:3:2013 05:13
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: LAAAAAAAAQABAAEAAAABAAAAAwABAAEAln0Ss1amIihuP24GvMugt0DwLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP - 8 D
  FACP LENOVO TP - 8 D
  HPET LENOVO TP - 8 D
  MCFG LENOVO TP - 8 D
  SLIC LENOVO TP - 8 D
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  CO-SUBMISSION LENOVO TP - 8 D
  ASF!   LENOVO TP - 8 D
  TCPA PTL LENOVO
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  UEFI LENOVO TP - 8 D
  UEFI LENOVO TP - 8 D
  UEFI LENOVO TP - 8 D

  Looks like you used the media to retail with OEM SLP key. an OEM SLP works only with manufacturers of installation media.

  change your product key to the one on your COA.

  Click Start, type slui 3, press on enter.

  before reformat, I used belarc advisor to get the product key. can barely read the print in the contract of affreightment

  This key will not work. You must use one on the certificate of authenticity.

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.