hp455: cristian

Similar Questions

• Hi, my name is Cristian

  Hi, my name is Cristian and I have a problem with my phone, to be more accurate with my apple ID. Although the password works when I stick on my PC, for example when I access icloud, the same password there n * t work when I paste on the iphone. and he tells me that my ID apple has been blocked for security reasons. Moreover, he sends in the configuration menu, to unlock and change the password. I chose to unlock with security issues, the answers are ok, I introduced the new password and then, when I tried to activate the icloud, he tells me the same thing... to indroduce the password, thaat my ID apple is blocked... and I don't undestand why... cause my PC I can logg in my "manage your aplle ID" with the same password which rejects the iPhone.

  Apple ID - alert "this identifier Apple has been disabled for security reasons" is displayed

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• How to choose a good input language

  I buy the laptop to a toshiba A60 185 and I choose the Italian language for Windows XP. I have to work with portuguese (brasilian) texts, whereas I had installed a version of wordXp of 2002. I don't know what I chose as input language and keybord language. I try some combinations, always with the Portuguese as an input language, but I have all the solutions.
  I thank you,
  Cristiane

  Hi cristi

  Can you please tell me what version of program language Word do you use?

• Satellite A200-27R: help with the fn XP

  Hi all

  My new laptop is a 27R A200 PSAE3E-07H027EN
  I hate Vista so I downgraded to XP Professional.
  Everything seems fine, BUT I have problems with the Fn keys :-(
  Strange thing is that some are Fn + ESC, Fn + F1, Fn + F3 Fn + F4... but I can not change the brightness (Fn + F6, Fn + F7) and I can't toggle the touchpad (Fn + F9).

  I installed a few Toshiba Power Saver and it helped me to solve some brightness... but I need for the random variable during the day... for having solved the brightness is VERY frustrating... I really need your help, people.

  I don't need THAT these three combination Fn to work, I don't mind even to cancel the others...

  Help! Help! Help!

  Cristian

  P.S.: If you have a working driver, would you mind to send e-mail? Thank you!

  Published by: Admin

  Hi Cristian

  I wonder why you didn't search first for the issues described in the first messages. :?|
  I remember this issue and I can certainly tell you that the solution was already posted here in the forum to a Satellite forum

  The solution is very simple; as described by SambaDeAmigo the version of the BIOS XP is needed to get all FN keys work.

  This will work for sure!
  Try it.

  Best regards

• Portege R700 - fonts in the main window of AuthenTec Truesuite changed

  Hello

  I installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After two days of good performance the police in the main window changed, becoming impossible to read. No doubt, I have change some settings in Windows and, also, this font has changed because of course I change anything in your application. Bearing in mind that my OS is Windows XP Professional SP3, pelse be so kind and help me with a solution to return to standard fonts.
  I uninstalled applications records, cleaned, reinstalled software package downloaded from the Toshiba site, request

  Thank you

  Best regards

  Cristian

  Can send you a link where you can see the screenshot?
  I mean for a better understanding.

• Portege R700 - fonts in the main window changed

  Hello

  I installed on my Toshiba Portege R700 AuthenTec Truesuite version 3.0.1.149. After two days of good performance the police in the main window changed, becoming impossible to read. No doubt, I have change some settings in Windows and, also, this font has changed because of course I change anything in your application. Bearing in mind that my OS is Windows XP Professional SP3, pelse be so kind and help me with a solution to return to standard fonts.

  Thank you

  Best regards

  Cristian

  Hello

  I assume you mean on the fonts in Internet Explorer window.
  Right?

  Please check the display option in the menu bar. Zoom must be set to 100% and Textsize must be set to medium.
  In addition, you can check the settings in the control panel-> display-> appearance tab
  There is option called the size of the font. In my case it s set to normal.

  Give it a try.

• Internet toolkit 64-bit

  Hola a todos,

  I need el Internet para toolkit Labview 2009 para Vista 64-bit, y no lo encuentro por lado para poder bajarmelo any. If any of ustedes me could help con el link bajarlo donde me ayudaria a monton. Además con este toolkit Lei as era posible open a Web browser in el front panel of labview SE to estoy if lo correcto, lo Necesito UN in this way to open una Cámara ip what none are compatible only con Labview y solo puedo see desde a Web browser, are por esto that wants to open United Nations Web browser en el labview.

  Thank for photos.

  Hello

  I need from the Internet Toolkit for Labview 2009 for Windows Vista 64 bit, I can't find anywhere to download it. If anyone of you could help me with the link where I could download, I'll be very grateful. Moreover, I do not know if its possible with this toolkit to open a Web browser in the front panel. I need this to open an IP camera n it is not compatible with labview, so I can handle the camera with a Web browser.

  I appreciate all the help

  Cristian

  The Internet toolbox will not help you open a web browser in the front panel. If that's what you want to do you don't need the Internet Toolbox. Under Windows, you can simply use an ActiveX container with incorporated inside of Internet Explorer ActiveX control. If you open the example Finder (help-> find examples) and find 'activex' or 'internet' and open the 'ActiveX event Callback for IE. It shows you how to have a web browser directly on the front panel.

• Open the NI USB-6210 collector

  Hello

  It's just a small matter. I have two Renault uses a NI USB 6009 and the USB-6210. I use the 6009 as outputs open collector. I can't find any information on collector/drain open for the 6210.

  This configuration can be configured?

  Thank you

  Cristian

  Ibanez,

  The digital output channels on the USB-6210 are sourcing outputs.  This module does not change this setting in the software.

  Good luck with the rest of your application!

• How to view and control a VI remotely from a web browser

  Hello

  I want to see and order a vi using a web browser.
  I followed the steps recommended in the help, and I can see and order the front of my vi.
  So far, everything is OK.

  First problem:
  A button activates a simple storefront a message (a dialog box button). The dialog box opens on the server computer, but cannot be seen in brouser, and can not be closed remotely.

  The second problem:
  Another button activates another window (vi) loaded dynamically. The reentrant VI, is open with option 0xC0 ('Enable simultaneous calls on reentrant VIs' and "Ready to call and forget"). By clicking on the button, it opens multiple instances of the VI properly and is running on the server computer, but is not visible on the client computer.
  I created, once the same algorithm, the HTML file corresponding to the dynamically loaded VI and it was recorded at the same place with the main HTML file of the program.

  What to do what the client computer can operate main VI and the adjacent windows in the browser?

  Thank you
  Cristian

  You can't if you use remote façade panels - they do not allow for additional/popup windows. You must rewrite your VI to include everything on the main façade.

• HP DV7-4150EA - headset problem

  I have a problem with the settings of the helmet, when I play command & conquer tiberium wars and I want to hear the sound only through headphones, but I don't know how, the sound is almost always in the portable speakers main, just occasionally the sound game is in the headphones, and I do not understand why did this because I am not in contact with the sound settings. I checked the game settings and there is no such setting, is this a problem with my sound card drivers?

  Thank you

  Cristian

  Windows 7 Home premium 64-bit
  HP Pavilion DV7 4150EA

  problem solved by reinstalling the game

• Blurry text in small characters in Icon editor 2009

  I am trying to create an icon with a small text, but every time I try a text size 10 or smaller, the text becomes blurred (see below). I know that I could get a text more without that happening before, but for some reason it just now and I do not know why. Any help is appreciated!

  

  Thank you

  -Cristian

  Cristian,

  the following steps should solve the problem:

  Navigate to the Control Panel - display properties - settings tab -: appearance
  Click on 'effects '.... "and disable or change the active element of the option"use the following method to smooth edges of screen fonts ".

  Thank you

  Tom

• Swapped the HARD drive of the Pavilion G6 2264sa with a Pavilion G6 1331sa HARD drive / brightness not wking... !!

  Hello

  Hope everyone is well and wonder if anyone can help me. My problem is my daughter's laptop, she is in the middle of the student to College and all of his work is on his laptop which is a:

  HP Pavilion G61331sa/1.6 GHZ AMD Quad-Core A8 - 3520M APU with Dual Radeon 6620 graphics card + 7450 M / 6 GB memory / dedicated graphics video AMD Radeon HD 6620 + 7450 M bi - GPU (1 GB of DDR3 memory) / 750 GB SATA (5400 RPM) HARD drive / running Windows 7.

  Unfortunately, my son accidentally spilled juice on the laptop. I quickly took all the preventive measures, turn off the power / battery disassembly / HDD and upsets the laptop. I also left in the closet of broadcast for a few days to dry out, then tried again. It lights up and the power light stays on and the fan works but the caps lock button warning light flashing and the screen remains empty, even when I try to use an external monitor via HDMI connections again the external screen is blank. It seems that most of the spill was on the left side of the keyboard because the keys are very sticky this side. I talked to HP to my problem that the laptop is still under warranty, however as we know that it does not cover accidents, and no, we don't have the coverage of the accident. My daughter is in the middle of exams a solution was needed pronto. It was suggested by HP techy guy to buy the modern equivalent with the same HARD drive and just change the HARD drive and update all the drivers.

  I bought a HP Pavilion G6 2264sa / Intel® Core™ i3 - 2370M / 4GB memory / 750 GB SATA Hard Disk Drive / graphics Intel HD Graphics 3000 (up to 1.65 GB) running windows 8 (64-bit).

  I changed the HARD disk as proposed and updated all the drivers. There was a slight problem starting up but just had to go into the BIOS at startup (F1 key) Startup Configuration / settings and do know the Boot from the HDD instead of CD ROM, etc.. The HP Pavilion G6 2264sa started with the G6 1331sa HARD drive and works very well. My daughter doesn't have to worry about spending time to find away around a new laptop and windows 8. everything is just where she knows that it is.

  The only problem I have is the brightness (f2 and f3) doesn't seem to work and the screen is very bright degree to cause a headache. I have uninstalled and installed the graphics drivers but still no control over brightness...!

  Any ideas where I have gone wrong?

  Your suggestions and ideas will be very well received and appreciated.

  Thanks in advance...

  This computer does not display any right screen?

  And caps lock flahs once in 4 seconds?

  If it has been: is failled into a CPU and they want also to repair or change your motherboard.

  In any case, go to a place and make planning expenditures compared with the price of your laptop.

  Other way, the disk its ok so your girls its safe.

  You are very wellcome.

  If the HP Forum do not delete my account, I will have more pleasure and response.

  Tank You

  Cristian deruy

• How to increase a number 1 in a loop

  Hi This is slightly more difficult that the title reads I think.

  I have some time the com port to detect a switch being turned on or off by a looping rs232 loopback

  If I get an error of judgement, no error on.

  I want to do is multiply by 1 when the switch is in the off position, but for the moment

  just constantly increase as the function '+ 1' is in a loop.  How can I do more

  the number of times.

  The loop should run continuously if the switch is on or off

  I hope this makes sense, I have attached a picture of what he does now

  I look forward to your suggestions.

  One way is to use a flag.  I have change the true flag as soon as the thing turns on, then wrong again until the next time it is turned on.

  There may be better solutions, but this is the first thing that comes to mind.

  EDIT: My example is what said Cristian.  Beat me to it.

• DAQ digital output default to low Earth

  Hello

  This probably a basic question, but I have found information on this subject.

  When I connect a data acquisition unit (usb6009) to the USB port I get any output defaults to a high (+ 5V) until I run my program and I put them to lower ground.

  Is it possible to configure default data acquisition always at 0V?

  I enjoy any comments or links on how to change this.

  Thank you

  Cristian

  The default value for the 6009, is that they are all set for entries. What you see is the pull up. But, no, you cannot set the power of the State to the 6009.