HP5520 - an error occurred during communication with the scanner

A HP5520 for a few months and all were working well. But today does not scan wireless.

I'm on a Mac OSX 10.9.2 imac and have reinstalled just the last bundle of driver on the HP website but no joy. The HP scanning utility will show the printer in the list, but throws up this error message:

"HP Photosmart 5520 series-AirPrint is currently unavailable. Please check if it is connected and turned on, or try again later. »

If I try to connect through system preferences printers and Scanners it throws up to the following error:

"Year error occurred while communicating with the analytical engine."

Any ideas?

Don't worry, I've now solved with a stop down / reboot everything after you have reinstalled the drivers. I think that, maybe, last week cut off was to blame reboot on the mac has rebooted without the scanner is powered and the scan of the computer had not been activated. A restart of the mac corrected it.

Tags: HP Printers

Similar Questions

  • Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

    I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

    Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
    More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

  • An error occurred during communication with the server

    After Update to 1.1.3 will result in a message

    An error occurred during communication with the server. Could not test the compatibility of the Folio Builder and server. Please check your network connection and try logging in the Panel again

    I always can not connect to FOLIO BUILDER.

    In countries where I am support for Digital editing Suite cannot be smooth .

    I hope that I have learn you to Difficulty easy .

    Windows 7, people who use InDesign 5.0, le 1.1.3 update and are problemslike me.

    Windows 7 InDesign 5.0, 1.1.3, haven't seen anyone who uses un good .

    I doubt this question is a known issue . Information associate at this place et watched them in the Forum for solve the the same eopeotdeongeot .

    Je do not have speak good English .
    Sorry to write only sentence is clumsy .

    Come on, J’ai hope the problem is solved .
    Progress of the project is order .

    Hello

    Please refer to this topic in the forum http://forums.adobe.com/message/3880336#3880336. If you have any other questions, feel free to contact me.

    Thank you

    Michael

  • Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

    Original title: All of a sudden internet backgammon works not

    Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

    Hello

     

    1. what browser do you use?

    2 are you facing the same issue with other games like asset stings on the internet?

    I suggest you follow these methods and check.

    Method 1: You can check if the problem appears in a clean boot state.

    Refer to this link: http://support.microsoft.com/kb/929135

    If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

    Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

     

    Method 2: Temporarily disable the security software and check if the game works very well.

    Refer to this link: turn off the antivirus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

    Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

    Refer to this link: turn enable or disable Windows Firewall

    http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

    Note: After checking the functionality enable the Windows Firewall.
     

    I hope this helps!

  • F2480 An error occurred during communication with the HP imaging device

    I've been troubleshooting for hours, the solutions provided by HP do not fix the issue. I get the following scanner twain, preview is loaded and crashes for no apparent reason, then after a few minutes, the error is displayed.

    I have Windows 8.1 Pro 64-bit. I have been using this device with previous versions of Windows without any problem whatsoever. I have been using Windows 8 with no problems whatsoever. This problem however makes me crazy. And apparently I'm not the only one... Without the help of HP in sight, I'm about to go get a replacement no HP.

    I'm sorry to say this weekend that I unplugged the unit, I uninstalled all the drivers and software HP and I am now using a new device from another manufacturer. I think it was simply a problem of compatibility between software and drivers and Windows 8.1, and given the age of the unit, I was expecting HP to solve.

    Thanks for the trouble, if.

  • Can't send or receive messages on behalf of Verizon (tdwolfe2). A timeout occurred during communication with the server.

    This message box appears quite a bit. All I have to do to solve it? Thanks for any solid help. MW

    Hi Mary,

    Please contact the Microsoft Community forums.

    It seems that you are unable to send or receive messages on behalf of Verizon.

    He would be grateful if you could answer a few questions to refine the question.

    1. What mail client do you use? What is customer e-mail based on the web or Microsoft Outlook client?

    2. are you aware of changes to the computer before the show?

    3. do you use Internet Explorer to access e-mail? If so, what is the version installed on the computer?

    This question seems a temporary problem with the server and you can consult again later.

    If you use Internet Explorer, you can perform the steps described in the article.

    The problems of access to webmail using Internet Explorer

    http://support.Microsoft.com/kb/2483955

    Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

    If you use the Microsoft Outlook client, you can post the question here.

    http://answers.Microsoft.com/en-us/Office

    If you use Windows Live, you can post the question here.
    http://answers.Microsoft.com/en-us/windowslive

    Hope this information helps. Get back to us if you have more queries about Windows.

  • Error during communication with the remote host when you create the new virtual machine

    I'm under 7 ESX servers on IBM Blade H22 there is a mistake to invite while I create a new virtual machine

    on the vcenter Server

    At the end of 30-35 minutes, it gives an error

    "Error during communication with the remote host"

    The existing machines are working well... I tried to create virtual machines to other ESX servers as well

    but the same question. I also tried to make the clone of existing machines, but without success

    Can anyone help?

    You rescan the LUNS once?

    You've restarted the management agent?

    You've restarted the vpxa?

    If this isn't the case, please perform the step above and check out them.

  • 0 x 80041006 "a network occurred when communicating with the game server"

    Today I got this error message when you try to connect to Internet Spades - 0 x 80041006 "a network occurred when communicating with the game server".  Same thing happens with Internet Backgammon.  Has anyone else had this problem, nobody has found a solution please?

    Patti

    Hi Syed,

    I was able to access all aspects of the internet, only Internet Spades/Backgammon & checkers that are on my PC, all gaming sites like Yahoo & Pogo were available.  A few hours later everything was back to normal, so I think it may have been an error of site specific to these games.  Thank you for your advice I will hold firmly in case of future problems.

    Concerning

    Patti

  • First construction of DEFAULT DOMAIN for "Integrated Weblogic Server" in jDeveloper 12 c gave ERROR: wlst > error occurred during initialization of the virtual machine;

    Hi my community developers estimated!

    I just installed Oracle jDeveloper 12 c as part of the new version BPM Suite 12 c successfully on my LAPTOP.

    However, when I try to create the first integrated default for the weblogic Server domain to run by using the database of embedded JAVA (do NOT use an external Oracle DB) - I get the following error in the log below:

    QUESTION - how/where can I change the ' USER_MEM_ARGS = - Xms32m -Xmx1024m' specification in jDeveloper, to allow a smaller 'MAX MEMORY setting, instead of Xmx1024m"since I DO NOT have enough memory (virtual) on my laptop to create the default domain.

    Thank you very much!

    Please see from the log of the errors below:

    Add the environment variable to WLST script = - Xms32m USER_MEM_ARGS - Xmx1024m - XX: MaxPermSize = 384 m
    Log file: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain.log
    Label: JDEVADF_12.1.3.0.0_GENERIC_140521.1008.S
    Home product: C:\Oracle\Middleware\Oracle_Home\jdeveloper\jdev\
    Area: D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\DefaultDomain

    2014 BuildDefaultDomain2.py - 07-04 18:00:03

    cmd.exe /c "" C:\Oracle\Middleware\Oracle_Home\oracle_common\common\bin\wlst.cmd""D:\data\859442303\Application Data\JDeveloper\system12.1.3.0.41.140521.1008\o.j2ee.adrs\BuildDefaultDomain2.py""
    Process began
    WLST > error occurred during initialization of VM
    WLST > could not reserve enough space for lots of things
    WLST > error: could not create the Virtual Machine Java.
    WLST > error: a fatal error has occurred. Program ends.
    Elapsed time: 437 ms

    Thanks James, I changed the memory allocation in the WLST script and I no longer get the VM error

  • An error occurred during registration of the IBR WinNativeConverter component

    Manager components-> BOVINE infectious rhinotraecheitis select WinNativeConverter, update, restart IBR.

    When I logged in IBR, after the error message displayed.

    I think that the ActiveX control cannot register, please let me know if there is a solution.

    [Error Messages] ==============================================================
    The conversion of 'Outside In Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.

    WinNative system error Converter: the conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
    System HTMLConverter error: conversion of 'OutsideIn Technology' is not available because the ActiveX control failed to register. System error: correct path is not found.
    ========================================================================


    OS: Windows 2003 R2 Enterprise, 64-bit
    University Complutense of MADRID: 11 GR 1 material PS5 (11.1.1.6.0)


    [Detailed error messages] =.
    ! csPdfOIXError2, did not correct path.
    < br >! syExceptionType, java.lang.Throwable
    java.lang.Throwable
    to pdfconverter. PDFCInstaller.postErrorNotice (PDFCInstaller.java:189)
    to pdfconverter. PDFCInstaller.configureOIX (PDFCInstaller.java:126)
    to pdfconverter. PDFCInstaller.configureWindows (PDFCInstaller.java:81)
    to pdfconverter. PDFCInstaller.doFilter (PDFCInstaller.java:63)
    at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
    at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
    at docrefinery.server.RefSystemLoader.executeFilter(RefSystemLoader.java:321)
    at docrefinery.server.RefSystemLoader.doFilter(RefSystemLoader.java:197)
    at intradoc.shared.PluginFilters.filterWithAction(PluginFilters.java:114)
    at intradoc.shared.PluginFilters.filter(PluginFilters.java:68)
    at intradoc.server.IdcExtendedLoader.executeFilter(IdcExtendedLoader.java:462)
    at intradoc.server.IdcServerManager.init(IdcServerManager.java:211)
    at docrefinery.server.RefServerManager.init(RefServerManager.java:67)
    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:625)
    at intradoc.idcwls.IdcServletRequestUtils.initializeServer(IdcServletRequestUtils.java:456)
    at intradoc.idcwls.IdcIntegrateWrapper.initializeServer(IdcIntegrateWrapper.java:102)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at idcservlet.common.IdcMethodHolder.invokeMethod(IdcMethodHolder.java:87)
    at idcservlet.common.ClassHelperUtils.executeMethodEx(ClassHelperUtils.java:305)
    at idcservlet.common.ClassHelperUtils.executeMethodWithArgs(ClassHelperUtils.java:278)
    to idcservlet. ServletUtils.initializeContentServer (ServletUtils.java:1273)
    to idcservlet. ServletUtils.startAndConfigureServer (ServletUtils.java:547)
    to idcservlet. ServletUtils.initializeAllServers (ServletUtils.java:460)
    to idcservlet. IdcFilter.initContentServer (IdcFilter.java:181)
    to idcservlet. IdcFilter.init (IdcFilter.java:156)
    to weblogic.servlet.internal.FilterManager$ FilterInitAction.run (FilterManager.java:343)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.FilterManager.loadFilter(FilterManager.java:96)
    at weblogic.servlet.internal.FilterManager.preloadFilters(FilterManager.java:57)
    at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
    at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3154)
    at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1518)
    at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:484)
    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
    at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
    to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
    at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
    to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:671)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:212)
    at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:59)
    at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
    at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
    to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
    at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
    to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
    at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
    at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
    at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
    at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
    at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
    at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
    ========================================================================

    If I had to guess (part of the stack is not present trace) and this configuration under Windows, I would say something was installed in a path with spaces.

    -Maybe the Java runtime was installed at something like "C:/Program Files/Java.
    -Maybe the House of Middleware has a space in the path.

    A less likely scenario is that the user account running the IBR process has insufficient permissions to install the OCX, or to read the path where the OCX has been installed by another user. This might occur if you install the software using the Windows "Administrator" account, without using the server of the infectious BOVINE as "MyServiceAccount rhinotraecheitis."

    I think maybe this tidbit in the installation documentation, but for the IBR on Windows, it is imperative that the same account user will be used to install all software components. It may be less important in this case because the ILO is used, but it is still a solid strategy. (I saw in the struggle of people for days trying to understand issues IBR on Windows because they used several users to install the individual pieces - IBR, a printer, Ghostscript, office. They have always had to reinstall using a single user).

  • Fatal error occurred during installation of the file. The willingness of cleanup now install and get out. so that the installation of BIAPPS 11 g

    Hello

    I install BIAPPS 11.1.1.8.1.  I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6.

    I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager

    at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error:

    "Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'.

    Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow.

    Thank you.

    Hello

    I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade...

    Do all this, then upgrade will be smooth.

    Thank you

  • system restore an unspecified error occurred during restore of the system... why it can not restore for me?

    I tried to restore my system 3 times because something is wrong and I wanted to get back to normal... but it keeps saying

    Hi, Doris.

    An analysis of the system by using the System File Checker

    Start > type CMD

    If you are using Windows Vista and Windows 7, right click on the CMD window and select run as administrator

    If you use Windows XP, press ENTER to open the command prompt window

    Type SFC/scannow

    Press enter

    Note: There is a space between sfc and / scannow

    How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

    http://support.Microsoft.com/kb/928228.------

    If it is missing or damaged you will be asked for your Windows Recovery CD/DVD files so please with it.

    You can also view the solutions proposed in these discussions:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/i-am-unable-to-perform-a-system-restore-how-do-i/d80e54ae-2829-4270-B032-455d017172b4

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/unable-to-do-a-system-restore/1ef52b3f-ff34-461D-9813-a95d341e2afd

  • There was a problem installing HID Non-User Input filter data (KB911895), a fatal error occurred during installation of the device

    I tried to uninstall the faulty data filter & reinstall download (KB911895). all attempts fail & downloads auto continues trying to install "ad noursium". How can I solve this problem please someone? Brian

    Hello

    Step 1: Follow these steps and then try to install the update.

    1. go to the location: c:\windows\system\drivers\
    2. search for and rename the file wdf01000.sys wdf01000.old
    3. restart the computer.

    Step 2:

    Reset windows update components

    http://support.Microsoft.com/kb/971058

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

    why I cant player to access itv now when I could always? He returns with "an error occurred during the processing of your request."

    Hi James,

    Let us know a few details about the issue.

    1. which operating system you have installed on the computer?

    2. what web browser do you use to open itv player?

    3. are you able to play other videos online on other sites?

    If you use Internet Explorer, then you follow these methods.

    Method 1:

    You can run the fix for video problems in Internet Explorer.

    Playing video files crashes or blocking Internet Explorer - Windows

    http://support.Microsoft.com/mats/video_freezes_or_crashes/

    Method 2:

    You can also follow the steps in the following article and check.

    The video problems when you use Internet Explorer

    http://support.Microsoft.com/kb/2532294

    Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings and Add-ons. We recommend that you note these sites before using Internet Explorer settings reset feature and re - activate the Add-ons.

    Feel free to get back to us for other queries.

  • Error: A connection has been established with the server, but then an error occurred during the connection process.

    Hello

    I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

    ID from step 1

    Server NIBKSQLCLUST

    Job name LSBackup_DRIB

    Newspaper log shipping backup job step name.

    Time 00:00:02

    SQL severity 0

    SQL Message ID 0

    Operator by e-mail

    Operator Net sent

    Operator paged

    Retries attempted 0

    Message

    2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

    2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

    2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

    2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

    The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

    Thank you

    Boonlep coulibaly

    Hello

    I suggest you to send your request from the link and check.

    http://msdn.Microsoft.com/en-us/hh361695.aspx

    http://msdn.Microsoft.com/en-us/library/bb545450.aspx

Maybe you are looking for

  • Issue of Windows systems

    I have windows XP, my school request I have windows7 or compatible, I have to get windows 7 or windows XP enough and is it compatible with windows 7 programs for school?  Help!

  • BOOTMGR is missing Vista X 32

    Hi all My PC is running Windows Vista X 32. I have 2 drives installed with three partitions. Disk 0 = drive (C :) and road (e :)) (two partitions))) Disc 1 disc (d :)) = Drive (C :) = initialization, file of the Active Page, Crash Dump, primary Parti

  • How to view NTUSER. DAT file as to the registry without using it?

    How to view NTUSER. DAT file as to the registry without using it? The file is from a different Windows instalation! I have Win 7 but it comes from my old Windows xp.

  • White screen on Boot and CAPS lock and NUM lock LED blinking on HP Pavilion dv - 6 portable 1210sa

    Hello I'm on HP Pavilion dv6 - 1210sa laptop with Windows vista Home Premium (service Pack2). It's the operating system, which is that the laptop came with when I bought in 2010 and later service pack 2 was installed using windows update. I can confi

  • Purchased the product, but does not

    Hello team, I bought all the products of the contract for a month and I paid for it, m are still unable to start. It list I still need to buy... Please help me.