hp5520e printing after slow start moved to the static IP (Win7)

Similar Questions

• My printer hp 2200 just started printing very slow, what may be the problem?

  He barely moves but does not print after awhile, slowly, do not know what to do as HP help not forth coming. Thank you

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) is the question any special or specific printing online applications?

  (3) remember you to make changes to the computer before the show?

  You try to perform the steps mentioned in the article and check if it helps.

  Note: Methods of resolution of the above issues apply to the Windows operating system 7

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For any other help, I suggest you to contact the manufacturer of HP printers support.

  Here is the link: http://www8.hp.com/us/en/support-drivers.html

• Cursor starts moving across the screen from left to right after the wake up the computer from standby or hibernation

  Original title: cursor goes wild

  My PC to 'wake up' sleep/hibernate, the cursor initially moving across the screen from left to right, in which window is open, destroy all the document is on the screen. I force Windows to close. How to solve this other than turning off standby/hibernation?

  Looks like the cursor of the mouse is very sensitive when the computer comes out of standby or hibernation.
  I suggest that you go in the mouse properties and lower the sensitivity and see if that helps.
  You also need to update any driver mouse if possible.

  Let us know if that helps.

  Marilyn

• Satellite A100 - Questions about slow start, not in the DMA mode CD drivers

  Hi all

  as you can see I have 3 questions:

  1. my Satellite A100-153 starts very slowly (current running avira antivir and sunbelt pfw only like on my other laptop which is older than this one, but not slow start)-anyone has any idea why (I would be very gratefull because I don't have reinstall win and all my stuff)?

  2 Nero tells me that my CD is not running in DMA mode - where can I check and fix this?

  3. drivers - am I forced the drivers supported on this site or can I use the drivers directly from the manufacturer (ATI for my graphics card, Intel for my chipset realtek for my sound and so on)?

  Help is welcome!

  Hello

  For me, it will be interesting to know what operating system you are using. Anyway, I'll try to give my short opinion on your questions:

  -many other factors may be responsible for slow start. It is usually the OS configuration. I'll try to find an interesting article, how to make faster starting and I will post it here for you.

  --entrer enter in the device IDE ATA/ATAPI controllers Manager, enter the properties for secondary IDE chanel and open the Advanced Settings tab. Is under transfer mode DMA if available? If this isn't the case, set it to please and after reboot check if the problem persists. DMA if available is usually defined as a default value.

  -In general, you can use it but it is well known that manufacturers of graphics card don't support mobile graphics cards and laptop manufacturers are responsible for.

  I recommend you to use the Toshiba drivers only. All of these drivers are put to the test.

  Good bye

• Slow start upward with the Satellite P300 - 18 M (PSPCCE)

  This question has already partly been requested, however, I would like to ask everyone this question specifically:

  -What someone knows a slow start at the top with the P300 - 18 M?

  Please, even if your computer starts correctly, I would appreciate a response, so I can see if it's a problem with all of these machines, or if there is a problem with mine.

  By starting slowly, I mean that:

  After the vista screen "Loading" and "Orb" appear:

  http://vistasupport.MVPs.org/images/install_vista/Vista%202%20copy.jpg

  http://www.WindowsReinstall.com/WinVista/images/Image57.gif

  I get the screen below, for 2 minutes:

  http://farm4.static.Flickr.com/3033/2853070854_91b4b7dcfa_b.jpg

  I tried to disable ALL startup at startup (using MSCONFIG)

  Pourraient people please share their experiences with the P300 - 18M

  Thank you, Jack

  Hello

  Check it please my ad - http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947

  Good bye

• Printer Spooler not started or has the error?

  When you run in the installation or printing issues, and it gives you a message on your "Printer Spooler", it is usually in the service of your window.

  Here are some measures that you can get (again).

  1. click on Start Menu
  2 right click computer
  3. choose MANAGE
  4. click on Services and Applications
  5. choose the Services
  6 scroll down until you see PRINT SPOOLER, if it is there, click on it and run it. (In addition, it should be NOT automatic manual)

  If the "Printer Spooler" isn't on the list, you will need to contact your WINDOWS because this should be already on your computer and START.

  Thanks for reading, hope this helps.

• How can I move my images and the drop down menu to my form dynamic after you start textflow to the partform option, content: textflow?

  I m looking for this information about 2 hours. It sounds simple but I can´t find a way that allow the think in my forms automatically adapt the appearance if someone adds new lines in the paintings and the possibility to have more distance between fields at the same time.

  I hope I could explain my question sufficiently...

  I use a windows pc with adobe acrobat pro dc and cycle 7 Direct designer ES 4.

  Thank you very much for your help.

  [Moved to the Forum LCD]
  

• Firewall Windows disable the Internet Explorer loads Up after slow start after the installation of Windows updates

  Hello, (this the mystery of on and Off and back on Windows Firewall with slow loading of programs like Internet Explorer as this all is pass it on firewall, disable the firewall, the firewall, it occurs only during starts, after he fine / but very annoying on reboots whom he accuses of my computer down) / listed below is the cause of it , and when she first started, you have a solution?

  I recently installed the last 16 (High Profile) updates to security, for most security updates and updates from net framework as well as the removal of malware for windows XP tool.

  After installing these updates, now my Windows Firewall turns off during 'Boot Up' on all restarts. If I try to load Internet Explorer, it will also not load up to minutes serveral / while this happens... That's fine, then finally my firewall itself loads Up quickly turns to Internet Explorer and back on during this time around the same time.

  After these updates these things are happening on my computer now, it's as if there is a process running, but nothing run any virus, Trojan or worm etc just these updates caused this problem. I don't know if it updates is corrupt or not, but have tried different things as system file checker /scan etc with no luck.

  (1) computer boots to the top and seems to Load Up Fine ' until the ' or 'Look at this' but isn't, something is running in the background or process "wing unstalled" is obviously "unhooked", etc..

  2) try to load Internet Explorer last minutes and is very slow to load up, even if I 'don't load Internet Explorer' must still a long while that as in the firewall turn off for awhile some several «minutes» (way too long), before "auto turn on automatically return.

  (3) turns firewall Windows itself on "finally" as Internet Explorer finally loads upwards as well the two Internet Explorer is able to load 'definitely' and the firewall is on "finally" as many minutes later as listed above, at the same time.

  This could be the cause? Only, it has begun to 'After' I ran windows update and installed the 'most recently high security updates for windows XP' there were 16 listed mainly security updates and updates of net framework as well as the software removal tool windows malware.

  That's all that is changed on my system, I tried many things, nothing seems to fix this problem with my computer. I know for a fact that these updates are the cause, but am not sure that you caused it? Or how do to solve this problem, any sugguestions would be appreciated.

  Please answer questions following diagnosis by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on the computer?

  3. do you have a Norton or McAfee free trial come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  4. you are using IE6, IE7 or IE8?

  5. have you ALREADY had the opportunity to do a Repair Installation of Windows XP for some reason any?

  PS: PLEASE DO NOT START ANYTHING IN ADDITION TO NEW THREADS ABOUT IT!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• iMac slow start caused by the spotlight?

  For some reason, my iMac i5 2013 end has always been slow to start (at least as long as I can remember).  its quick access through the actual boot process but, once I connect to my profile, there are about 5-7 minutes to load and become usable.

  • I tried to make another profile and started in to confirm that it was my profile.  It is exclusive to my profile.  very good start.
  • I reformatted my mac and reinstalled OS X and recreated my profile.  Problem comes back in a month or two.
  • Took a look in the system log and found that his 'looks like' spotlight is very slow on this topic for some reason any.  I turn off the projector and the question is basically gone!  This feels like dressing difficulty however, no idea what continues?

  Here is the log from BEFORE I turned off the projector: it won't let me post the log because of his characters... but here is a screenshot of the suspicious party...

  

  Please post a report of EtreCheck of your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

• Error message appears after each start up toward the top of my computer.

  Error loading: C:\Users\Michelle\AppData\Roaming\mousel.dll
  The specified module could not be found

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 64 bit enterprise slow start first on the computer in a lab

  Our College, all computers are imaged with the same image.    If I take a computer and put in A workshop it takes a new user 50sec to connect the first time.  No problem.

  In the WORKSHOP c if I take another new image and have the users in advance it takes 30 to 60 minutes to start.  The user is on the screen of welcome for this full time.   Most of the time when this same user trys from computer 2 workshop C (after that first successful computer 1 boot time is 50sec or so.)

  You have ideas of how to debug this

  Hello MikeRCTC,

  Thanks for posting in the Microsoft Answers forum! To improve the assistance with your issue, I recommend that you post in the TechNet Forum below:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I forgot the password of Windows. After Windows starts, boot, shows the DELL logo and is our user name, ANNE and under that must enter PW

  Dell Innspiron M5030, Win 7, 64 bit. Did enter the United Nations, ANNE and pw?   can't remember, used about 9 months ago after the failure to remember and put aside to wait to call Dell last. Now out of warranty and their first service unaffordable fees. If anyone can help?

  How I would enter as an administrator in Mode safe? I would like to explore this option.

  It seems that you skipped a lot of security options that Microsoft has integrated into Windows 7 in order to protect you from the forgotten passwords.

  If you have already enabled the administrator account, then it becomes automatically visible on the login screen during the boot without failure. You can see in Mode safe?

  If you can't, then it is a complex process that allows you to reset a password. She relies on you start the machine in Repair Mode, using your CD to repair Windows. You burn such a CD? If you do not, you can burn it on another computer? Please report here to get further instructions after that you are able to start your machine in a Mode of repair with this CD.

• The Finder crashes repeatedly after a start-up of the machine of time :/

  Hello!

  I hope someone can fix and enlighten the connundrum on my mac.

  During workflow last Friday my Macbook Pro became very unresponsive. The FCC kept crashing, and the beach ball stops all processes including typing.

  I went into the recovery partition and checked and repaired discs. There was a problem of partion with HD, but who fixed green OK.

  Once started in normal but also safe mode, the problem persisted still so I got Time Machine machine in the recovery partition, spend a couple of hours back. It took a little more than two days (50 something) hours to accomplish.

  The unresponsivness and beach-ball problem seemed fixed, however the finder would crash on start and remains afterwards, crashed, with all tests afterwards.

  I first tried the terminal fix to (re) move the plist, alas, that did not help.

  I tried to run in safe mode, but still no luck.

  I had another look at the recovery to do first aid on the disks. All were very well outside the HD this time. The fault could not set in the recovery partition.

  I used the single_user_mode to fix the HD and it worked. I ran until the result reported no abnormalities.

  But once enter the normal mode the finder still kept crashing.

  I tried to erase and recover the OS via the internet and the OS recovery. None of them would not work. The internet recevry would crash/freeze and display a triangle with an exclamation mark with something like apple/support message 2020 slot. Operating system recovery took a little more than two days once again and this time the mac could start not at all normal (or safe) mode. I got was the Apple logo on the screen with a bar that has frozen once filling up (I left it 12 hours, just in case)

  I now rebooted the machine through the using time Machine recovery partition again (this time come back someday).

  Unfortunately, the fault of finder is still there. I can access some programs such as safari and texedit, but anything that uses or is based on a finder is a no-go.

  I don't really know where to go from here.

  The specifications of the machine:

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  It currently runs on Yosemitte. (I had to downgrade from El Captain six months ago, because it is incompatible with the legacy Adobe Creative Suite and Maya)

  Process: Finder [2163]

  Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder

  ID: Finder

  Version:?

  Code type: X 86-64 (Native)

  Parent process:? [1]

  Responsible: Finder [2163]

  User ID: 501

  Date/time: 18:16:48.452 2016-04-07 + 0100

  OS version: Mac OS X 10.10.5 (14F1713)

  Report Version: 11

  Anonymous UUID: 3275A424-FAD3-983D-506F-EB98F04C5948

  Time since started awake: 1300 seconds

  Crashed thread: 0

  Exception type: EXC_BREAKPOINT (SIGTRAP)

  Exception codes: 0 x 0000000000000002, 0 x 0000000000000000

  Request for clarification:

  dyld: launch, loading of the dependent libraries

  Dyld error message:

  Library not loaded: /System/Library/PrivateFrameworks/ContactsData.framework/Versions/A/ContactsDat one

  Referenced from: /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook

  Reason: image not found

  Binary images:

  0x7fff600ac000 - 0x7fff600e2887 dyld (353.2.3) < D9967621-6378-381B-A47B-5085EE476B62 >/usr/lib/dyld

  Model: MacBookPro9 2, MBP91.00D3.B0C of BootROM, 2 processors, Intel Core i7, 2.9 GHz, 8 GB, MSC 2.2f44

  Graphics card: Intel Graphics HD 4000, 4000, Intel HD graphics card integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x80AD, 0x484D54333531533643465238432D50422020

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0xF5), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: TOSHIBA MK7559GSXF, 750,16 GB

  Serial ATA Device: MATSHITADVD-R UJ - 8à8

  USB device: Hub

  USB device: Hub

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB Device: IR receiver

  USB device: Apple keyboard / Trackpad

  USB device: Hub

  USB device: FA GoFlex Desk

  USB device: FaceTime HD camera (built-in)

  Bus crush: MacBook Pro, Apple Inc., 25.1

  The installation of the OS is altered. No doubt the startup disk is defective.

  Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your confidential data safe during the repair of the equipment

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• to the slow start to activate the mouse

  New wireless mouse takes 3 to 4 minutes to answer after turning ON the new iMac 27 "(2015, El Capitan)." I expect a much shorter time. If wake-up machine after sleep mode mouse or keyboard response is instantaneous.

  Hello there, fredfromoakville.

  Looks like you have intermittent with your Apple Magic Mouse mouse problems when turn on the power of your iMac. The following Knowledge Base article offers some great information for troubleshooting:

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected

  Your device is not recognized by your Mac

  Follow these steps if your mouse, keyboard or trackpad is not recognized by your Mac.

  Make sure your wireless mouse, keyboard or trackpad is on

  The Magic Mouse and the Magic Mouse 2 can a slide on the bottom of the unit. Slide the power switch to turn the unit on. On the Magic Mouse, the Green LED lights up briefly. On the Magic Mouse 2, green will be visible.

  The keyboard Magic and Magic Trackpad 2 can a blade on the back edge of the device. Slide the power switch to turn the unit on (you will see green). Earlier models of Apple wireless keyboard have a power button on the right side of the unit. Pressing the button activates a green LED on the top of the unit, next to the button.

  When you activate these devices, they will appear as connected in the Bluetooth system preferences section. If a device does not appear, make sure it is loaded or it replace the batteries and make sure that he was paired with your Mac.

  Make sure that your device has been set up to work with your Mac

  Learn how to pair your mouse Magic 2, Magic Keyboard, Magic Trackpad 2- and earlier models of wireless Apple - with your Mac devices.

  Make sure that Bluetooth is turned on

  Choose the Apple menu > System Preferences > Bluetooth and make sure that Bluetooth is enabled.

  Refer to the table below for more information on the determination of the status of Bluetooth. If this icon does not appear, or if the menu bar status continues to indicate that the Bluetooth feature is turned off, restart your computer, and then try to reactivate Bluetooth.

  The Bluetooth menu icon	Status of Bluetooth
  	Bluetooth enabled, but there is no device connected to the Mac. See the section make sure that the wireless keyboard or mouse is selected for this section.
  	Bluetooth enabled and at least a wireless device is connected.
  	When this icon flashes, at least a wireless device has a low battery. Click on the Bluetooth icon to identify the affected device, then recharge or replace the batteries.
  	Bluetooth is disabled. Click on the Bluetooth icon using a USB mouse or the built-in trackpad and select "turn on Bluetooth on.
  	Bluetooth is offline or unavailable. Restart your Mac. If the Bluetooth status does not change, disconnect all USB devices and restart your Mac.

  Make sure that your devices are charged

  Magic 2 mice, a keyboard Magic and Magic Trackpad 2 have built-in rechargeable batteries. You can load these devices by connecting them to a Mac or a using a Flash to a USB power adapter USB cable. For the performance of the fastest battery, remember that your device is on when it is connected to the lightning to a USB cable.

  To check the level of the battery of these devices, click the Bluetooth icon in the menu bar of your Mac, and then select your device by name. If any device's battery is low, recharge the device. If the device does not appear, make sure that the device is powered by following the steps described above.

  Your mouse or your keyboard intermittently not responding

  Follow these steps if your mouse or your keyboard sometimes stops responding temporarily.

  Click or press a key

  • Click on the mouse or trackpad, or press a key on the keyboard to reconnect the device to the computer. It may take a while for the device to respond.

  Search for interference of signals

  • Wireless networks that operate on 2.4 GHz can cause interference. Move base stations of phone wireless, microwave ovens and other appliances of 2.4 GHz far your Mac if you suspect interference.
  • Keep devices wireless to 10 meters (30 feet) of your Mac.
  • Avoid putting metal objects between your wireless device and your Mac.

  Thank you for reaching out to the communities of Apple Support.

  Kind regards.

• Read command line arguments to TestStand sequence start, moving within the sequence

  Start a sequence by using a batch file and add command line arguments. Example: "MySequence.seq Arg1.

  Now, within the sequence I want to read this first (and another) argument "Arg1".

  There is a stage in the ActiveX for that, giving a type (object reference) channels, see screenshot.

  Question: How to use this reference to read the argument?

  Honestly I don't think that you are using it correctly.  I think that your application in your UI Manager must handle this.  However, to answer your question:

  According to the TestStand help CommandLineArguments property is of type string.  It comes to aid of TestStand as well:

  Channels
  A collection of strings. You can get a reference to the collection of the ApplicationMgr.CommandLineArguments property, the ExpressionEdit.GetValidEvaluationTypes and ExpressionEdit.SetValidEvaluationTypes methods and the ApplicationMgr.ProcessUserCommandLineArguments event.

  Properties
  Count (read-only)
  Agenda

  Methods
  Add
  Claire
  Insert
  Delete

  Looks like you can use activeX not use Count or properties of the element to retrieve a single argument.

  Hope this helps,