HP61-322N R ~ screen stays black at startup with flashing lights (capslock & liked keypad)

Similar Questions

• Screen stays black at startup PC

  Original title : lost total access to the pc

  my pc as missing brothers ran into him, he was viewing 2 emails sent to him through facebook then off his pc, later, when he has access to nothing after he had turned back on it it wouldn't let him click on all programs, and then he could not move his mouse, while he could not close yet. It off and then later tried to turn it back on, but now the screen is black, it doesn't start, he carnt access anything, its in black only, it says "none signed" on the screen but hes checked all the connections and everything is fine... hes running ' windows 7' on a Dongle.Do you think it as a VIRUS , or a firewall?

  Hello

  The computer looks like it is starting up? Future fires, making noises of boot and fans running?

  Looks like the computer has a hardware problem and you need help from a real computer store (one
  makes its own internal service and no leeks and display a Best Buy or other stores)
  or support from the system manufacturer.

  Remove ALL power and then reconnect the cables (at both ends, when possible)-, memory and cards.
  in fact, remove and replace - don't do not just tight.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After turning on the computer, the screen stays black

  original title: fix a black screen

  After turning on the computer, the screen stays black

  It could be that your video settings have been set to a resolution that your monitor does not support.

  You can start mode (repeatedly tap the F8 key during startup key) safe?  Safe mode requires a video resolution supported by all monitors.  If it works, try to change your video resolution settings
  (Control Panel-> display-> (tab) settings.

  HTH,
  JW

• 15 r007TX 15 HP laptop: HP laptop screen stays black with the mouse cursor flashing

  Hello

  Here I am facing probhlem. my laptop is started but screen stays black and a slider is binking on that...

  I just perform a clean boot and once I restarted my laptop and then I faced this problem...

  Please help me...

  I have laptop HP 15 15-r007TX with windows8.1 64 bit having 4 GB RAM with i5 4 genration processor with dedicated 2 GB and 1 TB of hard disk graphics card...

  Please help me...

  Thankss...

  Hi @Shawnfrost,

  Welcome to the HP Forums!

  This is a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that when you start your laptop, you get a blank screen with a blinking cursor.

  Here is a link to help overcome this problem.

  Computers laptops HP - computer won't start (Windows 8)

  It can also help.   Laptops HP - computer will not start and the lights blink or the computer will beep.

  If you enjoy my guarantor please click on button below congratulations to say thank you.

  If it solves your problem, please click the solution in order to allow other people to find this information.

  Best of luck and have a great weekend!

• Laptop screen stays black with the mouse cursor only after that comes the HP and Windows logo

  Hi all

  No, my laptop model is HP Pavilion dv6 1337tx. My OS is Windows 7 Home Premium 32 bit. So, today, I shut my laptop down by force by pressing the power button because it did not at this time. Then the next time I turned it the wrong problem started. Whenever I'm on the HP logo sometimes and then the Windows logo comes also. But then the screen stays black and the mouse cursor appears. So, what can be the cause of this problem? I also tried to open with 'safe mode' and 'safe mode with command prompt', but they did not help either.

  Note - I tried the method of discharge after taking off the battery and holding down the power button. He could not help. All LEDS are working properly. I have no extra monitor, so I can't check the display elsewhere. Also, I ran the memory test which shows that everything is fine. Please suggest what I can do now as I can not enter the laptop now. What can be the reason?

  Black screen with blinking cursor:

• Satellite L10-333: screen stays black, until I hit the edge of the screen

  I have a Satellite L10-333, which is about 3 years old, it has suddenly started having screen problems.
  It started with a white screen instead of the normal and a black line all downstairs in the middle.

  Now when I turn on the pc, the screen remains black and dead until I hit the edge of the screen and when the screen comes alive, I must hold and press part of the cover, so that the display stays on...

  Anyone know what's the problem?
  I thought it might be a loose wire or connection.
  Someone else has or had this problem?

  Thanks for your help...

  I agree with you. It must be a contact problem. In my opinion, it is not important if anyone else has this problem too and you have to find the solution as soon as possible.
  The laptop must be disassembled and check the connection of the screen. Now the question is what to do. Can you check it alone or you need professional help?

• the screen is black at startup, I have to turn off many times before the lites screen upward

  screen is dark at the start until I have to turn off several times before the lites screen upward.

  [Moved from comments]

  Hi Ken,

  It would be more useful if you answer these questions.

  1 Windows operating system you are using?

  2. What is the brand and model of the computer?

  3. were there any hardware or software changes on the computer?

  If you use Windows 7, then follow the article provided to fix black screen at startup issue.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows

  For Windows 7: back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

  Thanks vikrant I used scannow and it fixed my problem of registry. I have windows 7. Click Start type command RT. Click on the cmd icon, click on run as administrator, black screen should appear. type sfc/scannow press ENTER.

• Satellite a200-1sv screen remains black at startup in Vista

  Hello

  We have a problem with Toshiba Satellite A200-1sv my girlfriend: when we started, most of the time, the screen remains black, while the computer starts: after awhile, we can hear the sound of windows (vista).

  In addition, if connect us another screen of the computer, it displays the scheduled start screen. In order to use the computer, it must launch a few times... The support guy where we bought the computer told us "the computer is not compatible with Vista, we cannot do something".

  Can we do something?

  Thanks in advance,
  Ju

  I have to smile to read this message
  Mainly, this statement is funny;
  > The support guys where we bought the computer told us "the computer is not compatible with Vista, we can't do something."

  I think that this laptop has been delivered with the Vista operating system. So why the guy said that the laptop is not compatible with Vista?  :| …. that's nonsense.

  First the A200-1SV belongs to the PSAE6E series and it s fully Vista capable.
  Secondly, like you say the external screen displays home Toshiba screen and so I guess that's just a matter of adjustment.
  What you can do is to use the FN + F5 key combination to switch between display devices.

  If it doesn't help to try to put the laptop back to the factory settings using the Toshiba Recovery CD!
  In this case, the new OS, driver and tools will be installed and then everything should work fine.

  Good bye

• Satellite M70: screen stays black when the cover

  I changed the OS XP Home on my M70 laptop with a retail XP Pro... I downloaded (I think) all the patches in this forum, but when I close the lid of my laptop and reopen the screen aren't animate. Activate the hard disk drives and dvd rom, but the screen remains black. What Miss me?

  Hello

  Utility energy saving there is an option called when I close the lid. What is there as option set?

• Satellite L500-1XL - does boot and the screen stays black

  Hello

  I have a Satellite L500-1XL, when I turn it on the fan and lights and the hard drive light blinks several times then nothing, he's not going to the Toshiba screen remains black screen, tried ext monitor but still nothing.

  The fan always runs very quietly and the hard drive is running in, I put the hard drive in an another L500 and it is very good and can be accessed without problem, it has only 1 stick of 2 GB of RAM DDR3 and the other L500 I is DDR2 so I can't try to change the RAM. If I remove the ram should it beep or does only desktop computers do this? Mine does nothing when it is removed.

  Any help would be very useful, thank you!

  Hi gazzdowzell,

  If your laptop doesn t boot it seems to be a hardware bad working it could be everything, motherboard, BIOS, CPU, etc and it is difficult to say what exactly is the problem.

  First of all, I would like to try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work, please contact a service provider authorized in your country. If your laptop is under warranty, repairs are free.
  In addition if you remove the RAM and the beep of t n for laptop, it seems to be another problem. If you have removed the RAM module would be defective, the computer would have a beep.

  Good luck!

• Satellite 210CS - the screen stays black (even to an external monitor)

  Dear Toshiba Forum members and guests.

  Several months ago, I found an old laptop. When I turn it on, the screen remains black. And when I connect an external monitor to the laptop via the VGA input, two screens are black. I used a flashlight, pulled on the LCD screen of the laptop, but I don't see all the details on the screen.

  I thought it was because of the empty RAM slots. This week, I bought a RAM-unit and installed.
  I tried to start the laptop again, but nothing on the two screens (even though I used a flashlight).
  I searched the Internet for certain solutions, but nothing works. I also tried updating the BIOS, found on the Web from Toshiba site.

  Some information on the laptop:
  Toshiba Satellite 210CS/1.3
  PA1230E
  48 MB RAM
  1.3 GB HARD DRIVE

  Date of manufacture: 4 ^ th ^ October 1997

  If you want more information or you would like more information, please put a comment in this thread.

  I hope someone can help me solve this problem.

  Thanks in advance.

  I think there must be some serious hardware problem.
  I don't think that someone will be able to tell what part exactly failures because it could be any inner part.
  You buy the RAMs again. Well, in this case, we can exclude RAM problem, but there is probably a motherboard, CPU or a graphics card problem.

  From my point of view of the few you don't have many options: perhaps you could found some other good treatments Satellite 210CS somewhere in the internet since it is not very easy to get parts for this oldie

• Satellite L500-1TC - does not start and the screen stays black

  Hello

  I have a Toshiba Satellite L500-1TC and since yesterday it no longer starts.
  The picture freezes and it restarted. Given that I can push the power button on my laptop and the LED indicates that it is on, but the screen remains black.
  No idea what I can do?
  The warranty is still active, so can I send it to Toshiba?
  Kind regards
  Sven
  (Sorry for my bad English)

  Hey Buddy,

  What you can try before you contact Toshiba official service is the following:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work it seems to be a hardware problem, then contact an authorized service provider. If your laptop is under warranty, the repair is free :)

• y510p screen stays black after waking up from standby or hibernation

  Seems that since the latest graphics drivers NVIDIA update (I'm not 100% sure on this subject, but I think that this is the case), my screen remains black at being woken up from sleep or hibernation. I know it's on, and what is not a matter of the computer is slow, because it is not and even if it were, leaving for several minutes and it remains empty and the power button and keyboard and everything comes on and it starts to heat up to the top, so I know it's something. Hit the FN - F2 for the backlight does nothing, so I don't think that is the question. The only way to solve it is to hold down the power button / stop and reboot, which pisses me off because sometimes I have a large upward job and am forced to lose. Anyone else see this problem? Could it be related to new graphics drivers, or is this something worse and related material? My screen looks OK when it comes to everything else.

  Thank you!

  Mod edit: Please keep in mind that these forums are accessible by people of all ages. Blasphemy and the attempt of profanity by bypassing the filter of blasphemy is prohibited by the Rules of the Forum , and have been removed.

  Well everyone, I think I 'solved' the problem. The latest NVIDIA drivers, I have installed the other day fixes the problem. I can sleep, hibernate, shut down, you call it without going through the screen lights up only not for the last day today. I can't say for sure, but I am sure that it was the matter of 99%. I appreciate the help nonetheless.

• Why my laptop screen stays black when I'm turning some time to connect to an electrical outlet?

  I can turn on my laptop while operating on battery and see everything very well.  He I have plug into AC power the screen goes black and I see nothing else that very small images.

  Hello

  I wish to inform you that, it seems to be a hardware problem. Then I suggest you to contact the manufacturer for assistance.

• I have PS CS 6.  I have the screen goes black.  Sometimes it flashes black.  other times it stays black until I have 'click' something somewhere.

  When you use my cs program 6, the screen flashes black or often just black.  If I stop moving my mouse it's a luck of the draw if the screen is dark or visible.  If it's black, I can click somewhere and get vision even once.  of course it's really a problem if I use the pen tool.

  Hi demippl,

  The screen shows black only in Photoshop or any other application as well.

  • Also, if it's in Photoshop, please go to the preferences > performance > graphics processor, please click on advanced settings
  • And please change the basic design and uncheck the option for "use Open CL/GL"
  • Restart Photoshop and please let me know if it helps.

  Kind regards

  Tanuj