HP655 update for windows 8.1 problem with Realtek driver

Similar Questions

• HP 655 update to windows 8.1 problem with Realtek ethernet driver

  Hello

  I do an update for Windows 8.1 and now I have a problem with the Realtek ethernet driver, which does not. If I look in Device Manager I see an error for Realtek ethernet driver:

  "Your computer's system firmware includes enough information to properly configure and use this device.  To use this device, contact the manufacturer to obtain a firmware or an update of the BIOS of your computer. (Code 35) »

  I have the latest version of the bios: F.26

  I try to install the driver from the HP site: 8.3.730.2012 HP driver

  also I try with the Microsoft driver: 8.1.510.2013

  Ethernet works fine in any other OS.

  Thank you for you time and I hope that solutions to this problem.

  @all

  Install the new Bios for HP 655 compatible sound

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/Realtek-Ethernet-driver-error-code-35-Compaq-CQ58-Windows-8/m-p/3208099#M53864

  655 HP

  Updated HP Notebook System BIOS (AMD processors)

  Version:

• Since the Safari update to the most recent, problems with Google Drive

  Since the update of Safari to latest, problems with Google Drive

  There are serious issues with Google Reader itself at the present time.

  Google is working on it.

  I suggest stop smoking GoogleDrive and remove (with the minus sign) of the SystemPreferences-> users & groups-> LoginItems.

  Until further notice. Take no risk.

• Update for Windows Vista (KB2492386) problem

  I continue to be put on hold for 5 minutes and when I try to shut down my computer while the computer is installing an update.

  Finally, the computer shuts down but it doesn't seem like everything has been done.

  Of course the next time I start my computer (which sometimes takes forever and others is pretty fast) I stopped him again with exactly the same problem.

  I looked at the edits and get the message that miss me a Vista (3.3 MB - "WindowsUpdate_8E5E0147" "WindowsUpdate_dt000" - update for Windows Vista (KB2492386)) update but when I try to install it - it invaraibly fails.

  Help, please.

  Hello

  1. you remember you have changed your computer?

  Try to follow the steps in the following article and check if it helps: How to reset the Windows Update components? http://support.Microsoft.com/kb/971058

• If I download the update for firefox I have problems with my real player as with the last update?

  The last update for firefox I was warned that if I downloaded it that my realplayer wouldn't work. I don't want to download the update to firefox 6, if I'm having a problem with realplayer

  Using the RealPlayer Plugin with Firefox

  • https://support.Mozilla.com/en-us/KB/using%20The%20RealPlayer%20plugin%20with%20firefox
  • http://KB.mozillazine.org/RealPlayer

  Check and tell if its working.

• Windows 7 RC: problem with American Driver for camcorder DV Sony iLink

  I installed Windows 7 RC and Corel Videostudio X 2 (Version 12) in German on my computer. When I connect my DV-camcorder Sony DCR-TRV22E with I.Link (IEEE 1394) windows 7 recognized the equipment and loading an American pilot with NTSC Videonorm. But my videos are saved to the PAL-Videonorm, which is usually in most European countrys. So my import do not work properly. In Corel Videostudio will be recognized at the camera, but I can only start with the codec DV in NTSC. This was not the case under Windows XP, everything works fine.
  Please can someone help me with this problem, and my second question is: in the official version of Windows 7, go down in Germany to 22. October 2009, is this o.k problem.?

  This is a forum for Windows Vista, so you might not get an answer here.

  I recommend that you post your question in forum Windows 7 hardware compatibility .  Steve Winograd, Microsoft MVP (Windows desktop experience)

• Since the last update of Windows, I have problems with iastor.sys dpc latencies...

  ... Technology Intel Rapid Storage Technology on my Ideapad Y560

  Has been published since the last Windows Update (happened to autoamtically in the background ) I now have a few latencies.

  It seems to come from the LatencyMon also says iastor.sys driver.

  Tried to install the version the more recent but no luck. STIL have these DPC latencies every few minutes.

  I also see the spike in ProcessExplorer and DPC latency.

  How can I fix it (without breaking my Windows 7)?

  Seems, I solved it, updated Atheroes AR9285 to 10.0.0.75 downloaded from http://www.atheros.cz/atheros-wireless-download.php?chipset=37&system=6

  Lenovo should add these drivers to their download pages ;-)

• How to fix sucurity update for Windows xp (kb263317) NE WILL NOT TURN to DAY

  MY SUCURITY UPDATES WILL NOT UPDATE SECURITY UPDATE FOR WINDOWS XP (KB263317) PROBLEM. Help.

  This thread may be interesting:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/update-failure-kb263371-error-code-800700008/a70eb05a-1f49-4A64-9C4C-302bb622a95c

• Problems with the installation of updates for Windows Vista security: error 80070490

  Having problems to install updates of security for Windows Vista (5 pieces) for months. Error code is 80070490. I have a lot of disk space and tried to repeat the time where there are no installation. I use wireless which is a power connection (seems to be the specific network), but connect to the internet using the cable has not solved the problem either. Help, please. Thanks for your time.

  Hi AndraP,

  Since these are updates important, even if you hide updates, you may need to install the update at some point.

  You can try to perform a clean boot and try to install the stand-alone package containing the updates.

  Step 1:

  You can perform a clean boot state.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished with the installation of the update.

  Step 2:

  Once you have placed the clean boot the computer, try to install the stand-alone package of updates from the links provided depending on the version of Windows that you are using:

  KB2378111 for 32 bit - setting of security update for Windows Vista (KB2378111)

  KB2378111for 64 bit - update security for Windows Vista for x 64-based systems (KB2378111)

  KB967723 for 32 bit - setting of security update for Windows Vista (KB967723)

  KB967723 for 64 bit - update security for Windows Vista for x 64-based systems (KB967723)

  KB2345886 for 32 bit: Update for Windows Vista (KB2345886)

  KB2345886 for 64-bit: Update for Windows Vista for x 64-based systems (KB2345886)

  KB970430 for 32 bit: Update for Windows Vista (KB970430)

  KB970430 for 64-bit: Update for Windows Vista for x 64-based systems (KB970430)

  KB972145 BOF 32-bit: Update for Windows Vista (KB972145)

  KB972145 BOF 64-bit: Update for Windows Vista for x 64-based systems (KB972145)

• I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  I keep getting failed to install with error codes 643 and 646 on my Vista, when I install updates for Windows... What should I do?

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• "update for windows vista (KB968389)" with the error code '800 b 0100'

  I'm unable to update titled "Update for windows vista (KB968389)". He always reports an error report with the code "800b0100" every time I try to install it? Can anyone suggest something that I can do to solve the problem?

  Hi TerryJackson,

  If you receive error 800b0100 in Windows Update, it means that a file needed by Windows Update is not registered by Windows correctly. System update readiness tool can correct some conditions that can cause this error.

  Method 1:

  You can try to run the system update tool and check,

  For more information, see the link:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Method 2:

  You can also try to download the standalone update package and try to install.

  See the link to download the update:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=6d96662c-F061-4907-b9bc-de2a1497dcfd&displaylang=en

  Hope this information is useful.

• I get a repeated error on install Platform Update For Windows Vista (KB971644). Fails with the error code 80073AA2. Installation comes from Windows Update.

  Windows Update loops round and round constantly to not set up correctly, then restores the changes

  Do I need to install the System Update Readiness Tool KB 947821?

  Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.

  Given that this problem is after a fairly recent install of SP2...

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this=""> ).

  In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":

  1. stop the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > Right click on run , and then select run as administrator >
  (type or copy/paste) %windir%\SoftwareDistribution > [OK]
  Open the download folder and delete its content
  Close the window.

  3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update |  View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.

  4. start the automatic updates service:

  Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
  Double-click automatic updates > click Start
  (Stopping the service will take a moment)

  =====================================
  To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.

  NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for windows xp (KB268509) guard security fail with 0x8007F0F4 error code

  Original title: update for windows xp (KB268509) maintains a failure.  What should I do?

  Whenever my computer tells me to click on the yellow shield to automatically install updates, on & on it keeps appearing, no matter how many times I click to install & computer automatically turns off.  This has happened for 5 months now.  Today, I spent more than an hour, inquiring more (I only am not computer savvy real), signed properly, and now see that what is not install is:

  update security for Windows XP (KB268509)

  It becomes annyoying.  I have a very good security against spam & virus McAfee but nothing over the top.

  You can solve this?

  Content of the double Post
  x8007F0F4 computer continues to try to install the update of security for windowsXP (KB268509) without result - code). What does this mean & how to install?

  About the previous question, this is the error code:

  PROBLEM: always have to install update for Windows XP (KB268509) security. All other updates, never install this one.

  ERROR CODE: 0X8007F0F4

  QUESTIONS: Is it important? Should I ignore it or get to the root of the problem? I have good system McAfee Security

  PS: I'm not very savvy computer...

  Thank you

  Thank you for your response.  All this seems daunting for me and I think that I better find someone more qualified in computer science than I do what you suggest.  I'm afraid that I could make things worse.
  Thanks a lot again
  S32

• Updating my windows... Problems with the driver AMD/ATI.

  Updating my windows... Problems with the driver AMD/ATI.

  PLEASE NOTIFY

  Original title: AMD/ATI driver

  Hi Amanda,.

  1. What is the exact issue that you are facing?

  2. What is the brand and model of the computer?

  3. that you get an error while trying to install updates?

  4. don't you make changes to the computer before this problem?

  If you have a hardware device that does not properly with your computer, you probably need a driver updated.

  Update a hardware driver that is not working properly:'t-working-properly#update-driver-hardware-isn't-working-properly=windows-7 http://windows.microsoft.com/en-in/windows/update-driver-hardware-isn

  Thank you.