HP7310 all in one printer: take a LOT of time a print or copy

Similar Questions

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• How can I get my HP F380 all-in-one printer scanner, copier control with Vista

  F380 working with Windows xp in all modes, but now it just prints and gives me no control other aspects of the copier of analysis and control, because I loaded Windows Vista.

  Hello

  Follow the steps below and check if it helps.

  Method 1: I suggest you download the drivers from the website of HP support- Driver & Software Downloads - all-in-one printer, HP Deskjet F380.

  Method 2: Run the printer Troubleshooter and then check if that helps.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

• What is hp psc 1355 all-in-one printer scanner copier compatible to be used in the WINDOWS XP operating system?

  I have a hp type copier printer scanner hp 1355. I need a driver (software) for this.  If the HP all-in-one device is not suitable for use on WINDOWS XP, is it possible to use hp 1355 in the WINDOWS XP operating system? Thanks FOR YOUR HELP.

  Hey Fed-Up-with-HP,

  Try using the brush included in the CD or download. Let me know what you find?

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the uninstall_L4 (exe or Bat)

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-23606-3&cc=US&DLC=en&LC=en&os=228&Product=306898&sw_lang=

  10. run the download to reinstall the printer

• Photosmart 2575 all-in-One printer scanner copier scans no longer, print only; MSI file not found

  It worked beautifully and still works fine as a printer, but can no longer answer mode "scan", which gives the message: "no scan options...". »
  I downloaded and installed your software (AIO_CDB_2570_Full_Win_WW_130_141.msi) from the HP Web site - even received a "Welcome" message after installing on my laptop (HP Mini running Windows 7 with all updates).  But when Windows tries to configure the installation package, it fails... (Message: Please wait while Windows configures HP Photosmart Essential.)   ...  Time remaining 1 minute' - then it gets no further.)

  Center of HP solutions running on my HP Mini, the message is: "your HP Photosmart 2570 series is ready" and I can adjust the parameters of scanning on the 2575 of my laptop. -for laptop and 2575 are "talk" to each other...
  When I run printing HP and Scan Doctor 4.4, it found errors of Solution Center & Twain & tells me I need an update to fix the errors, but it sends me to the same place from where I have already downloaded the software updated!
  Windows7 does not recognize the newly installed software & more like another package: "HPPhotosmartEssentials.msi", which he says he can't find.

  Instruction was also found on the HP Web site: "Locate & install the .msi file is missing file in the Temp of your computer folder", but there is no msi file in the Temp folder (download goes to the downloads folder).

  Please response ASAP - I cannot USE MY PHOTOSMART2575 MORE scanning DOCUMENTS and have lost DAYS on this - making circles in the round...

  I look forward to your help!

  Jeanne

  [Thank you for visiting the Forums from HP Support. I'm sorry to inform you that your message needs some changes to remove personal information].

  Sorry to say your advice has not solved my problem - but received a phone call the week last of Henry of HP at Gateshead (n. of England) support.

  After 4 hours or more (he missed his lunch...!) firmly on the phone and computer being "picked up" remote, it has removed HP all THE files on my computer (HP Mini) and then reloaded OLD original software for 2575 with updates,... Finally got all-in-one scan with the HP Mini success - so big thanks to Henry at Gateshead for his help there... :-)

• What is the difference between 2542 2544 HP and HP all in one printer/scan/copy?

  Hello

  I am looking to buy a new all-in-one and looked at the HP2542 and HP2544 printers. They are in identical boxes with identical pictures and the same price? Did someone knows what is the best go for as far as I can see only the product numbers are different? Thank you.

  Ruddy1

  Hello

  There is no difference between the 2, but the DJ 2544 is a printer retail and comes with a USB cable.

  and you can scan copy and printing to this printer.

  Hope this helps

• HP Photosmart C3140 All in One - printer, Scanner & Copier

  I really need help! I've been on this site since yesterday just trying to post my question. I'd appreciate any assistance really. I have Windows XP 2007 - HP Photosmart C3140 all in one. Everything worked fine until I installed a new router - Linksys router Cicso Wireless-N-Home. My roommate has a wireless computer, not a laptop. He installed the router - my printer goes through the motions as if it will print even if nothing prints. I tried to locate the my HP Photosmart C3140 all in one on my computer is not listed. My old printer that I use to have installed HP Photosmart C3100 series Advanced Document list my computer. There are at least 5 items listed in printing (QC) how can I get my C3140 reinstalled? It's so frustrating. I really want to hire a geek to fix. With instructions step by step I hope that you can provide, I am confident, I can do it myself. Sorry for TMI (too much info)

  Sindi pebbles

  Thank you!!!

  [email protected]

  Sindi

  What is a PCU?  The printer is connected directly to your computer via the USB port?

• Re: scanner failure hp 4280 all in one printer scanner copier

  Can someone help me please?

  I have a HP Photosmart C4280, which will print but will not scan when you use it with my Mac from Apple.

  I looked at different positions and have installed, removed, re-installed.  The Mac sees the printer and the scanner sees too.

  This morning the printer decided to print in miniature so that everything I print you need a magnifying glass to read. It's so aggravating circumstances.  I tried to solve this problem, but have failed miserably.

  Any suggestions would be welcome.  Thank you!

  

  If you are using snow leopard and have the HP software before Snow Leopard (either from a CD not marked as compatible with 10.6 or you recently upgraded to Snow Leopard and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Finally, download and install the "Full Featured" driver and software from the "Support & drivers" link at the top of this page.

• Invalid double-sided printing on the HP Photosmart C6280 all-in-One (printer, Scanner, copier)

  On my 'old' computer (ca. 1974) the print mechanism duplex worked fine, but after that I installed the printer on my 'new' PC (Windows 7, 64-bit), the double-sided printing feature works not at all (although it allows me to print on both sides manually).  In order to operate as it did in the past, should I uninstall everything related to the printer before reloading the software?  Or do I have to reload the software at all?  Or what should I do?  I would like to know before taking any action, because I don't want to create problems for me or my computer/printer.

  The duplexer must be set to "installed" as described in The Vista/Windows 7 Duplex Printing Guide troubleshooting here.  You will not need to uninstall and reinstall the driver.

• HP PSC 2355 all-in-one printer/Scanner/copier will not scan to PC

  Need help with this one, friends: our HP PSC 2355 refuses to scan our PC. When we press the scan button to start scanning, we receive the following message appears: "You must install or run HP software for this feature".

  We went into the HP Director to see if there was a way around this message, but then we received the following message appears: "can't find the path" C:\Program Imaging\Bin\ of Hewlett - Packard... \Skins\HP1\HP1_Skindef.xml ' »

  We've had this piece of hardware for about three or four years now. the software worked during our ownership, and now we cannot at first base; the thing has a mind of its own!  Can someone help us?  Thank you very much!

  Thank you! I have Win7 and had the same problem. I just scanned with paint - very easy

• HP photosmart 3210xi all-in-one printer-Scanner-Copier

  My problem is that I need a piece of the printer.  I like the printer, but the large gear that drives the ink pump is made of plastic and is worn.  I know the printer inside and outside so I could fix this printer if I could find a part.  I learned that the printers are not repairable.  However, HP must conclude a contract with a MFG Company somewhere to put together them.  How can I identify a number of reference and/or a company to order parts?  Without that part (gear), the printer is useless.

  Hello Pal700,

  Sorry to say that these pieces are not available outside and not customer replaceable ar IAM.

  That's why rquest to call the HP Technical Support for better options.

  Please call the HP Technical Support for assistance.

  If you are in the United States, the toll free # is 1-800-474-6836.

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• Scanning with HP PSC 2355 all in one printer/scanner/copier.

  In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

  You want to scan multiple pages into a pdf file?  The 3rd party below program works with most scanners.  It sells for $ 29.95.  You can download a free 30 trial to try out it if you wish.  (I looked for a program free and tried a bit, but none were any good.)

  Scan to PDF
  http://www.softi.co.UK/
  --

  "Bobbudden" wrote in the new message: * e-mail address is removed from the privacy... *

  In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

• Cannot find solution to load HP Photosmart C5380 All in One printer scanner copier that runs on Windows XP or Vista. Have you tried most of the suggestions from HP

  What can I do to fix this problem without having to buy a new printer

  Have you unplugged the printer, then uninstalled any software via programs & features, and then in the devices & Printers HP remove any HP printer. Then run the cleaning disk & rebooted.

  After that you visit the site of HP and download/install the full features software appropriate to the C5380 and win bit version and only connect the printer when the installation says?

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=UK&DLC=en&sw_lang=&product=3560275#N189

  If the installation is done correctly, then, what problems occur when you try to use the printer?

• HP PSC 1610 all in one printer Scanner Copier

  Seen the documents problem scanning.

  Receipt of message is 'no scan options '.

  Where can I get software to 'device '.

  searched for the PC using HP Image Zone and can't find it.

  Why don't you try uninstall the program from your computer and put it back, via the software provided by HP (link below). Try and let me know what happens!

  http://goo.GL/lx9cO

  Have a great day!

• Cannot install the all-in-one printer

  Download HP officejet 4500 G510-m from HP website. When I click on install, I get the HP message: the system cannot find the specified file. I've never had this installation problem.  I could always install. I believe the download is corrupted

  System Windows 8.1

  I uninstalled printer because had message printer disconneted.

  Check the devices & printers in the control panel

  Model photosmart all-in-one printer scanner copier HPDD4BE7 (HP office jet 4500 G510g-m) is installed on my computer. Not my model according to the image

  I don't have photosmart all-in-one printer. I have printer HP office jet 4500 G510g-m all-in-one

  According to HP print and scan the doctor 4.3

  The following products are visible from your computer

  HPDD4BE7 (HP office jet 4500 G510g-m)

  connection: network

  software requirement: installed

  I tried to print but prints blank pages

  I wonder if the cause of the problem when clicking on install is that I have already installed (HP office jet 4500 G510g-m) HPDD4BE7 so get the HP message: the system cannot find the specified file

  I have good HP office jet 4500 G510g-m printer installed?

   

  Troubleshooting report

  Problem with the yellow triangle detected printer with an exclamation mark inside

  There could be problems with HPDD4BE7 (HP Officejet 4500 G510g-m). Windows will take additional steps to continue troubleshooting.

   

  Solution: Rename the extensions of .dat files in the Windows folder and reinstall the software

  First step: rename the .dat files in the Windows folder

  Search box, type % windir %

  No adjustment results found for your search %windir%\System32

  The first step is not a solution

  Second step: download and install the software from the HP site

  Not a solution: when click on get installation message: the system cannot find the specified file.

  You don't need to the second step if you HP print and scan the doctor 4.3 installed or HP printer installation for windows Wizard. It detects the office jet HP 4500 G510g-m software is not installed, select the printer and click on install to download the software.

  question: when when the get message install HP: the system cannot find the file logle even when Mcafee firewall has been disabled or uninstalled.

  I have no problem, download and install any software but

  HPDD4BE7 (HP Officejet 4500 G510g-m)

  I did the test HP officejet 4500

  Green connection box

  device status green checkmark

  I cannot install the software (HP Officejet 4500 G510g-m) HPDD4BE7 HP printer install wizard for Windows or printing HP and SCan doctor 4.3

   

   

  Ok

  Please try the following steps:

  1. First of all make sure that McAfee of real-time scanning is disabled until you restart the PC.
  2. Open the dialog box run by clicking on the Windows key and the R key on your keyboard.
  3. Type %windir% , and then click OK.
  4. Type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  5. Type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat.
  6. By following steps 2 to launch the run dialogue box, type MSIEXEC /Unregister. in the Run dialog box and click OK.
  7. By following steps 2 to launch the Run dialog box, type MSIEXEC /REGSERVER in the Run dialog box and click OK.
  8. Launch the dialog box run by following steps 2, type % temp % and click OK.
  9. Open the last HP installation folder, that starts with the characters 7z (you can sort the view by date humidification) and click on the file Setup.exe .

  Please follow these steps in the exact order, is there a difference during the installation of the software?