hp7510 - fails at startup

Similar Questions

• Satellite L300 - fails at startup

  My Toshiba L300 fails.

  When I try to start it, it lights up. Then he said: run the system normally and all that, what I choose that it starts then it comes up with a bar and bar back and forth, a green and a (c) Microsoft Corporation under him. And that's all I've got left on for at least 30 minutes now.

  Hello

  Have you tried to start the computer in safe mode?
  In the start before the Windows Startup menu by pressing F8, select Safe mode.

  It's really hard to tell what is the reason for this, but in the worst case, you must reinstall Windows using Toshiba recovery disc.

  Welcome them

• Vista does not start, fails to Startup Repair indicating that the version of the operating system is incompatible with Startup Repair tool

  I use a laptop Dell XPS M1330, under Vista Home Premium 32 Bit. The laptop froze, I tried to do a system restore, which did not work. Now the laptop goes into startup each time put on repair. A message window appears saying "Startup Repair cannot repair the computer automatically. Startup Repair window says "Startup Repair could not detect a problem. Diagnostics details say: Root cause found: the operating system version is incompatible with Startup Repair tool.

  I tried to use the Dell Factory Image Restore to restore the system, but it does not end. I get an error message instead. There is no details, it's just a small window with an X and the Word error.

  I also tried to use resettlement Dell DVD, but that doesn't seem to work either.

  Vista does not start at all, not in either safe mode.

  I just ran to the Dell Diagnostics tool, and that is to say that the integrity test of memory has failed... No idea how to solve this problem?

  I'm at a loss and helps woukld be appreciated.

  Hi James,

  Ø are you using the correct version of the Vista disc to run Startup Repair?

  I suggest to run the diagnostic tool memory WINRE mode and check if the memory (RAM) installed on the computer works fine.

  Follow the steps below to start the computer using the WINRE and run the memory diagnostic tool.

  A. Insert the Windows Vista installation disc.

  B. restart your computer.

  C. Si you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  D. choose your language settings, and then click Next.

  E. click on repair your computer.

  F. Select the operating system you want to repair, and then click Next.

  G. in the menu system, SelectMemory diagnostic tool Recovery Options.

  Once scanning is complete, check to see if the problem is resolved.

  Access the link below to learn more about Windows recovery options in Windows Vista.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  If you have several sticks of RAM installed on the computer, you can try to remove one of the RAM stick and check if it works very well. Also, you try to exchange the RAM sticks and check if one of the RAM is originally this issue and if it needs to be replaced.

  Note: If you are not aware of the evolution and swaping the stick of RAM on the computer, it is best to contact the computer manufacturer for help on this and you can do it at your own risk.

  You can also contact Dell support and check if you need to replace any hardware.

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 500 - C60: new office reads, "ERROR: no boot disk was detected or the disc has failed" at startup.

  Just bought Pavilion 500 - C60, running Windows 8.1 64-bit and am doing everything on old HP running Windows Vista Home Premium SP 2. Has not gone smoothly from one thing to another, but I think everything comes together. A couple of days, began to receive the error message at startup or, if I COULD do so that it starts would go for awhile and then would get an ERROR message, requiring restart. Usually after obtaining the error message several times, the computer would then initialize. Tonight, I couldn't override the error message for anything! When you press power button / stop, I hear (HD) running for a few seconds, everything is silent, and then the error message appears on the gray screen dark in white letters, BACK very and sinister looking! Any suggestions? Had the computer about two months and it has not been easy.

  Not good!  Check all the connectors and the hard drive to make sure that they are correctly wired in place. Make sure that your cable is not reversed.

  Contact the seller if still under warranty for repair.  This could be the hard drive or motherboard and the problem lies the only diagnosis from a repair facility.

• After sleeping Satellite L850 fails at startup

  After sleep, my laptop Satellite L850 fails to start. I have to remove the battery and reinstall it to allow commissioning.

  How could I solve this problem?

  Hmm, it could be a BIOS issue related .would recommend watching the updates to the BIOS. I read on very similar problems in the forum have been solved by the BIOS updated.

• the driver installation failed after startup

  Hi all an im new here and im facing a problem with my compaq c500 there this BSOD 0x0000007B problem and I was able to start following the guide but since I can not install all the drivers on my laptop it gives me an error called the driver installation failed: could not find the device for this driver. Please help me thanks in advance

  To install the Conexant audio driver, you must first install the MS UAA.

   

  MS-UAA, ici

   

   OR > MS UAA for XP SP3, ici

  For assistance please post MODEL full and P/N of your serial number on the bottom of the laptop.

   

    The localization model number

• Error 'Check' [Fail] media startup

  Hello

  My laptop Dell XPS 14 purchased recently started throwing strange error 'Check' media [Fail] at boot time and does not start. I ran the Diagnostics but not found error. I did a few trails as allowing the start of the legacy, changing device boot order... etc, but nothing worked. Could some body help us with this please.

  Make my system: Dell XPS 14

  BIOS version: A13

  Thanks Allan for your help... I have a problem to find the right options in the thread by Francis Mather

  1. press F2 right when the Dell Logo appears.

  2. use the arrow keys to move to the tab named "Boot".

  3 select with the arrow keys so that the text named 'UEFI Boot' is white font color.

  4. navigate to the bottom, where it should say Windows Boot Manager

  5. press F5 or 56, to move in the list until you get the settings like:

  Windows Boot Manager

  UEFI Onboard LAN IPv4

  UEFI Onboard LAN IPv6

  6 hit F10, then your system will restart, without this annoying message appear.

  I am not able to find an option "Windows Boot Manager" in the UEFI boot menu. I have only two options i. UEFI Onboard LAN IPv4, UEFI Onboard LAN IPv6

  As I missed something here?

• Satellite A10 - failed at startup, check the system, then press F1

  Hi, I have this laptop old to repair.

  Main problem is that it starts. Display errors after all start-up:

  -#1 error - broken cdrom IDE
  -Check the system, then press F1 - ppl say it's a low cmos battery
  -File Boot.ini file is missing - is unable to repair itself, so that the CD does not work.

  Now, it looks like this. I turn on the laptop, shows the toshiba welcome screen, then theres the boot.ini of message end missing, begin on c:/windows and bam the phone keeps reseting showing again and again the same error. When I press ESC theres the message check system, then press F1 or IDE #1 - random error.

  If anyone has had this problem, Ive looked on the internet but did not get a decent answer, what to do with these cases.
  Looking forward to some good quality advice :)

  Hey,.

  I think the case is clear: Windows may start t because the boot.ini file is missing. You would be able to repair this file or reinstall Windows, but your work isn't CD player I think you need to replace the CD/DVD drive to get rid of this error.

  Then contact an authorized service provider, or take a look on eBay for second hand parts. Maybe you can find a compatible CD/DVD player that will work.
  Then you can boot from the Windows disc and repair Windows System.

  Of course, you can also restore factory settings using the Toshiba Recovery disk, but as a result, you must work of CD/DVD drive. ;)

• Portege R830, Win7 64 - Fingerprint Software update fails at startup

  After the Fingerprint software version 2.0.06409 update as recommended by Toshiba TEMPRO, a system message appears to stop and start: "TFPU LogonUI.exe Entry Point not found. The entry point of procedure... not found in the TFPUCommand.dll dynamic link library.

  The system cannot use connection of fingerprints. After logging in using the name and password of a standard user, the software itself runs correctly, by contacting the fingerprint sensor.

  Worked fine just before update.

  Hello

  Have you tried to reinstall this software of fingerprint?

  Firstly uninstall the fingerprint tool preinstalled.
  Clean the registry (for example, by using a 3rd party software CCleaner) and restart the laptop.
  Download the utility of fingerprinting of driver Toshiba UE page and install the software.
  Reboot the laptop once more and test functionality.

• Satellite P850 - 31L - completely fails at startup

  Hello

  Turning on this laptop I'm presented with "Reboot and select proper boot device."

  I tried to insert various USB and the default DVD recovery media, which no change the answer.

  This laptop has UEFI, I can't change the boot settings.

  Does anyone know what whether I can do to fix this?

  Thanks for the help.

  Glad to hear the problem is solved.

  Just FYI: Toshiba offers a detailed document on the BIOS Setup If booting from external devices is necessary. More details on http://aps2.toshiba-tro.de/kb0/TSB2B03F30002R01.htm

• Why connection Internet fails at startup but works on reboot?

  On PC and for friends as well with Vista and Windows 7, internet connection does not start until the PC is rebooted.

  This problem has arisen in the last 3 months for me and 2 friends in last month.

  Please indicate why/how correct.

  Hi Nigel,

  1. are you using a cable or a wireless Internet connection?
  2. you are using an Internet connection broadband?
  3. what browser you use to surf the Internet?
  4. you receive an error code or error message when you connect to the Internet?

  Please provide us with more information to solve the problem as soon as possible.

  Please follow the links:

  Method 1:

  Network convenience stores:

  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Note: Also applies to the Windows Vista operating system.

  Method 2:

  Updated network adapter drivers:

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  For reference:

  Network connection problems:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  I hope this helps.

• BlackBerry App Chrome fails during startup on a Z10

  I want to use Chrome because it allows me to press an image and then search Google for this image. So I downloaded on my Z10 using the snap, but it gives me this message when I try to run it:

  

  Does anyone know how can I fix?

  Kyle1988 wrote:

  I want to use Chrome because it allows me to press an image and then search Google for this image. So I downloaded on my Z10 using the snap, but it gives me this message when I try to run it:

  

  Does anyone know how can I fix?

  The desired feature works perfectly, suggest upgrading to SW release 10.3.2.2530, OS 10.3.2.2813 via an autoloader or Knowyou.

• Windows Startup Repair failed

  Event name: StartupRepairV2

  Signature 01: Autofailove

  Signature 02: 6.06000.16386.6.0.6001.18000

  Signed 03:6

  Signature 04:131074

  Signature 05: no root cause

  Signature 06: no root cause

  Signature 07:0

  Signature 08: 1

  Signed 09: System Restore

  Signed 02:0

  OS version: 6.0.6000.2.0.0.2561

  Locale ID: 1033

  my system repeatedly fails at startup. earlier repair work starts and when I select Restore restores point to last files.

  but on both occaisons I got a message saying that windows cannot repiar system and the error message as above was posted. later, the restore worked!

  Please help fix the winows

  Hello, Pushi_915,

  This question belonged to repair the system and recovery Forum.  Note the drop-down menus:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-System?tab=unanswered

  I've included the link for the same cause and resolution as follows:

  How to do a startup repair disk:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/startuprepairv2-with-problem-signature-01/e78dc24a-63e7-4314-8dc6-b1398981f41f

• Oracle BI Server 12 c startup failed (could not load library nqcsfwrapper64.dll FSB)

  Hello

  We have installed OBIEE 12 c version 12.2.1.0.0 on Windows 2008 Server R2 (Microsoft Windows 64-bit). Installation successful but when we try to start Oracle BI Server, we got the following error:

  Oracle BI Server start failed. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF.

  Please help me solve this problem.

  

  Environment

  ==========

  OBIEE 12.2.1.0.0

  Microsoft Windows x 64 (64-bit)

  Here you have several details of the journal.

  obis1 - diagnostic.log

  ===============

  ...

  [2015 10-29 T 17: 03:19.905 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] [nQSError: 46136] could not load library nqcsfwrapper64.dll CSF. [[

  file: server\Utility\Generic\Src\SUGCSF.cpp; Online: 283

  ]]

  [2015 10-29 T 17: 03:19.998 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik: ssi] [tid: 1014] Oracle BI Server failed to start. [nQSError: 46136] Could not load library nqcsfwrapper64.dll CSF. [[

  file: server\NQSNative\Driver\Src\NQDDriverImpl.cpp; Online: 461

  ...

  obis1.out (note the time is the same as above)

  ========

  ...

  < 29 October 2015 5:03:19 PM PDT > < INFO > < NodeManager ComponentManager > < ORACLE_OBICCS_HOSTS = SBSOBIEE1:9508 >

  Oracle BI Server from...

  Failed to start the Oracle BI server.

  nqsserver: stop Oracle BI Server.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server 'obis1' with the process id 4112 is not alive; Wait for the process to die. >

  < 29 October 2015 10:03:20 PM PDT > < FINEST > < NodeManager ComponentManager > < process of death >.

  < 29 October 2015 10:03:20 PM PDT > < INFO > < NodeManager ComponentManager > < server failed during startup. He could be retried according to the configuration of auto restart. >

  ...

  < 29 October 2015 10:03:20 PM PDT > < WARNING > < NodeManager ComponentManager > < C:\oracle\Middleware\Oracle_Home\user_projects\domains\bi\config\fmwconfig\bienv\OBIS\obis.properties does not contain the environmental parameters >

  Administrator_nQSetUDML_Gen.log

  ===========================

  ...

  [2015 10-29 T 16: 45:38.700 - 07:00] [PIPO] [ERROR: 1] [] [] [ecid:] [sik:] [tid: 244] [nQSError: 28031] error: could not open the file: C:\oracle\Middleware\Oracle_Home\bi\bin\...... \user_projects\domains\bi\bidata\components\OBIS\instance_mapping\obis1\mapping.Xml. []

  file: server\Utility\Server\Config\SUSystemConfig.cpp; line: 731

  ]]

  ...

  obis1 - query.log

  ============

  vacuum

  Windows 2008 Server R2 is not an operating system supported for OBIEE 12 c. To solve this problem we have installed on Windows 2012 R2 64 bit.

• Failed Validation of XP - Client4.6 - cvpnd.exe for C:\Windows\system32\vsinit.dll

  Windows XP Home SP2 - booted fail with the "attention 201. VPN required subsystem is not available. Unable to connect to a remote VPN server. "According to the documentation Cisco it said to reinstall the Client.

  I uninstalled the old client and reinstalled v4.6 and now the C:\Program Cisco Systems Client\cvpnd.exe (which is the Cisco Systems, Inc. VPN Service) fails on startup with the following error message: failed Validation of C:\Windows\system32\vsinit.dll

  I completely uninstalled and reinstalled the client, always VPN service not start and get the same error message. If I try to start it manually I get the same error message.

  Clues about where to look?

  Here is some info that I found from this URL:

  http://Forum.zonelabs.org/ZoneLabs/board/message?board.ID=inst&message.ID=24113#M24113

  Even if you do not use the product of Zone Alarm, I think you need to follow these steps anyway. Try it and tell me how it proceeds.

  Here is the content of the message:

  Reregister DLL files that are associated with Cryptographic Services

  To register .dll files that are associated with Cryptographic Services, follow these steps:

  1. click on start and then click Run.

  2. in the Open box, type cmd and then click OK.

  3. at the command prompt, type the following commands, pressing ENTER after each line:

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 /u wintrust.dll

  regsvr32 /u initpki.dll

  regsvr32 /u dssenh.dll

  regsvr32 /u rsaenh.dll

  regsvr32 /u gpkcsp.dll

  regsvr32 /u sccbase.dll

  regsvr32 /u slbcsp.dll

  regsvr32 /u cryptdlg.dll

  regsvr32 /u softpub.dll

  output

  4 restart your computer.

  5. Click Start, run, type cmd in the Open box, and then click OK.

  6. at the command prompt, type the following commands (press ENTER after each command).

  Note Click OK if you are prompted.

  Note Microsoft Windows 2000 does not include the Sccbase.dll file. If you are running a version of Windows 2000, omit the Sccbase.dll file.

  regsvr32 softpub.dll

  regsvr32 wintrust.dll

  regsvr32 initpki.dll

  regsvr32 dssenh.dll

  regsvr32 rsaenh.dll

  regsvr32 gpkcsp.dll

  regsvr32 sccbase.dll

  regsvr32 slbcsp.dll

  regsvr32 cryptdlg.dll

  regsvr32 softpub.dll

  output