HP7510 - message 'the printer is not connected.

I am trying to print from my MacBook Air and iphone 4, but I get the message "the printer is not connected" unable to find the printer from the iphone and MacBook.  The printer is connected as I continue to check the connection.  My wifi is password protected. Could be the problem? Help, please.  The printer works without problems on a few days and then the days I get the message that I get now.  Help, please.

This can be a router issue.  Restart your router by pulling its plug momentarily.

What router are you using?

Tags: HP Printers

Similar Questions

  • Want 4500: I get a message saying that the "the printer is not connected.

    I just bought a HP Envy 4500 all in one printer.

    I can't print to it without having to restart it every time.

    I get a message saying that the "the printer is not connected.

    I can access the built-in web server, so I am sure that it is connected.

    It seems that he is going to sleep but cannot be awoken by activity.

    I checked network settings changed and tried to change the Hello Service of priority higher to 9100 (because the default Internet Printing Protocol) seems odd, but makes no difference.

    The State indicates that the power of the wireless signal is 5 - that sounds just because it's six feet from my PC that has a great wireless signal.

    I uninstalled and reinstalled the printer.

    The restart is only viable if the printer is restarted and sent instantly - work if you wait a few minutes (energy saving option is set to 15 minutes and it's inside that) is the same thing - the said printer dialogus "Opening conection printer" and then, almost immediately, "the printer is not connected.

    If I try to scan I get an error-9923

    Hi @jpkeates,

    Welcome to the HP Forums!

    I understand that you can not print with your HP Envy 4500, once he falls asleep on your computer Mac OS X 10.11. I'm happy to help you!

    Please, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). It is also important to ensure that:

    Make sure that the multicast is supported

    If you use a wireless network, make sure that muticasting is supported and enabled on your router.

    If the new connection is working, you know that the printing problem is tied to the computer.

    If the new connection does not work, then the printer may need to be repaired or printed using a different type of connection.

    Disable IPv6 (network connection)

    Disable IPv6 on the printer to make sure IPv4 is used on your network.

    If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it to Off or disabled.

    If your printer does not display, use the built-in web server (EWS) to disable IPv6.

    From a computer on your network, type the IP address of the printer in the field URL of your Internet browser.

    NOTE:

    If the Web page appears empty, try another Internet browser.

    Click on the tab network or network, and then open the section or page corresponding to your type of network - wired or wireless.

    Select enable IPv4 only (or similar).

    Figure: Configuration example IPv4 using an integrated Web server

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope this guide and help the steps!

  • HP Premium 8600 - using OSX 10.9.4 with wireless and don't keep saying the printer is not connected

    Use the printer for a few months with no problems.  Now, out of the blue, I can't print.  Keeps telling me that "the printer is not connected" and "search for printer.  I see that the printer's system preferences.  So the printer is there. Why is this suddenly happening?

    If I disable wireless to the printer and then turn it back on, I can print maybe one or two times and then get the same message.

    What is the problem here?

    Hello

    Please, try unplugging your router from the power for 10 seconds, plug it back and leave 2 minutes to initialize.

    Then turn your printer off and turn it back on and allow it to reconnect.

    You can see any difference?

    If this isn't the case, please also restart the Mac and check for the difference.

    Shlomi

  • HP 1022: my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

    I have a Mac my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP

    check the Cable Connection, if you have another pc conect printer to it and check if everything is ok.

  • Photosmart 6510 "the printer could not connect to the server.

    Hi all.

    Just try to find this sorted hope someone can help.

    I am able to print irelessly of all our devices with no problems at all.

    However, when I click on the control panel applications he repeats me "the printer could not connect to the verification of the server of the internet connection and try again or enter a proxy address.

    I use an Imac with airport wifi router.

    Doing a search in the forums and on the manuals troble shooting pages, nothing seems to work.

    Thanks in advance.

    Let's define an external static IP and DNS address for the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 10.0.1.2 a.200.  We use 10.0.1.220 for your printer.
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • Want 4500: Connection error! The printer could not connect to the server

    Connection error! The printer could not connect to the server!

    Cannot set up eprint or update the driver. Ever been on the forums and do not understand what to do!

    I am successfully connected to my router and can print from my pc and my ipad with airprint.

    PC "will not find"the printer either for purposes of updating

    What I need to change the DNS. If so, I don't know what it is or how to do it!

    I went to the ip address but was unable to click on "wireless (802.11)", as recommended by a last response forum, as the next low 'status '.

    Can anyone help?

    Very frustrated customer :-(

    Hi @roopuk,

    Thanks for getting back to me.

    Sometimes the manual DNS 8.8.8.8 / 8.8.4.4 won't work in some configurations of network users.  Try the same steps as described above, but this time use the following parameters:

    Manual preferred DNS Server: 209.244.0.3
    Auxiliary manual DNS server: 209.244.0.4

    If you encounter the error, as before, we take our proverbial gloves off to try a more intensive troubleshooting.

    What is happening, it is that your router allows your printer connection that to enable wireless, but not a secondary connection to Web services.  In order to get these devices to 'shake hands' a second time, you may need to enable DMZ mode on your network through the router's built-in Web server.  HP does usually not this configuration for its customers as errors can cause serious network problems, but I can certainly post the info you need on your router or the ISP of the staff support company so that they could help you directly.

    Here is the information that you need for your provider service to open ports on your router/modem...

    -Multicast must be enabled
    -Hello enabled for AirPrint (relevant for iOS and Mac OS users)
    -Mac filtering should be disabled
    -Also, make sure that your router's firmware to date if
    necessary
    - The dmz on the router mode and turn it on to the printers IP address: _

    Ports to open are: Eprint and Apps

    Incoming Ports.

    UDP
    80
    443
    ------------------
    Outbound ports

    TCP
    5222
    5223
    -------------------
    Once they are open, you should have no problems connecting to services web eprint on your device.

    I would like to know how it works for you.

    Kind regards

  • Want 5540: Blue light blinks and the printer will not connect wireless

    Printer has been successfully implemented and operational, but today the blue light flashes, it does not connect to our wireless and will not be the same impression with ubs. I disconnected and reconnected several times and removed and reloaded the software, but the problem persists.

    Turn off the router and the printer. Turn on the router, wait 3 min. Turn on the printer and see if it connects to the router.

  • Network charges (7310) printer to 100%, then the error message: "the printer is not responding" - help!

    Hello

    until yesterday (with the new driver), everything was fine. Now the printer (Officejet 7310) print no more when it is connected to the network (ethernet or USB (to the router). The printer will print directly connected via USB to my MacBookPro, also when connect to my iMac.

    Tried everything, deleted and added to the printer (green light), restarted the pc, printer etc. Cannot read the extra level, utility HP does not get data to the printer.

    Everyone is any hint?

    Thank you very much!

    Efi5

    Hi Efi5,

    Make sure the printer connected to your router by Ethernet.

    Unplug the router for 30 seconds, plug back in and try printing again.

    If it persists, try resetting the following printing system and check if this may help you:

    * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

    Click on the Apple menu and then click on System Preferences.
    Select Print & Scan.
    Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
    Click OK to confirm the reset.
    Type your user name and password.
    Click OK. The printing system resets.

    Now add the printer by clicking on the sign more.

    Kind regards

    Shlomi

  • The printer is not connected.

    I'm about to trash this HP Officejet 6500 Wireless.  I've had it for maybe a few years.  I've never had problems as many with her until the last "update".  Once the problems have been perpetual.  Never, I can print when I want to.  I am running Windows Pro 8.1; 64-bit; Intel i7-2600.  Although it is a 'Wireless' printer I have connected by a USB cable.  When I installed the "update" the printer worked.  The next time I came back that he did not do; that it was not "connected to the computer.  I reinstalled the 'update'; It worked.  Days later he didn't; say that it was not connected.  I restarted. . several times.  I used another cable from the printer.  I've tried different USB ports.  I went to the Panel, devices and printers to see if I could see anything.  I don't.  I open the HP Solution Center.  No help.

    I'm out of ideas.  I need/want something reliable.  I'm pulling my hair out.  I can't reinstall the "update" whenever I want to print.  It's nuts.

    If anyone has a solution I have to abandon my relationship with HP.

    Hi OzzieButchand thanks for the answer!

    I recommend to download and run the uninstall of the Microsoft FIx - It tool facet:

    The problems that the programs cannot be installed or uninstalled

    Please hold me!

  • "The printer is not connected" - Photoshop CC 2014 + 2015

    I can't print from Photoshop CC 2014 and 2015.

    I have had this problem now for several months now and were simply too lazy to deal with. Fine, I can print from other applications. For these last months, I just create a jpg file and then print preview.

    After a while it becomes boring well!

    I'm on a Mac OS 10.10.3

    Can someone help me?

    Thank you

    Anne

    Ok. Two ideas:

    Apple System Preferences > printers and Scanners > right click on your printer > reset Printing System.

    If this does not work, uninstall your printer.  (Select the printer, and then click the symbol less).

    Go to the site of the manufacturer of your printer, get the latest driver package and install it. Reset. Try again the function print.

  • dleecom.exe has been removed and know my computer and the printer can not communcate between them, what I can do

    in my firewall settign my computer and the printer can not communcate between them hit the wrong button because it was working fine

    Flight23,

    Run first remove print jobs to remove all blocked the queue print jobs.

    Unplug your printer,

    Start, Panel, programs and features, your printer, uninstall.

    Restart your computer.

    Make sure that the printer has been deleted. Driver Manual printer removal

    With online computer, insert the floppy disk to the printer and reinstall the printer. You will get a message, the printer is not connected. Connect the printer at the moment (power on)

    Don't forget the programs anti-virus and firewall will block communications.

    Rick

  • Printer (8500) not connected (wireless) as I am updating to the mountain

    I have updated to OS x Lion mountain last week and were unable to make the printer work since then.  The printer works perfectly on Snow Leopard, but now whenever I try and print a document I tells me that the printer is not connected.  I tried a USB cable but have had the same results.  My computer is an iMac running OSX version 10.8  My printer is an Officejet Pro 8500A910a.  Thanks for your help.   SamO66

    Download and install this: http://support.apple.com/kb/DL907

    Reset the printing system:

    -Go to System Preferences > print & Scan
    -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
    WARNING - This will remove ALL your printers!
    -Select the sign more to add a printer. Select the default tab on the top of the window. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

  • HP DESKJET Ink Advantage 2135: My printer is not connecting to my computer

    I get a weird message from windows 'the last device you connected is not recognized by windows. I don't know how to solve this problem. Help, please

    Hello Kostas2

    Usually, the best way to resolve this type of problem is to uninstall the printer and then reinstalling it again.

    Download the full recommended software here...

    DJ2130_61.exe (115.8 MB)

    Turn off the printer, then unplug the USB from the computer.

    Right-click on Start, choose Control Panel> programs> uninstall a program.

    Uninstall everything about the HP printer , including the printer, HP image zone, Director of HP's image, or what is installed on your system.

    Also uninstall all other printers (if any) that you do not use.

    Restart the computer and the printer (do not connect the USB cable again).

    Right-click on Start and choose Control Panel> hardware and sound> devices and printers and make sure that the printer is no more. If that is the case, then right-click on it and choose Remove the instrument.

    Install the downloaded software and drivers from above. Follow the instructions that it will ask you to plug the USB cable into the computer.

    Let me know how it goes.

  • Printer will not connect, do not accept access code

    Hello

    I have a HP Officejet 4500 G510n-z.  We have been connected to a wireless network, then moved. We kept our same cable service, etc.  I tried to print from the same computer, but you get the status message that the printer is not connected.  The wireless light is on, I have turned off the power to the printer and the router, on again.  I have checked my router password and have tried several times to enter every other option password we have, but still not wrong password message.  I have Windows Vista and do not know what else to try.  Is there a way to completely circumvent the password option?  Thank you very much!

    Thanks for getting back to me. I have check the router password. I decided to uninstall/reinstall the printer and it is fine now.

  • HP Laserjet III: The printer does not print

    I have a HP Laserjet III printer that I used with my HP laptop. The computer has Vista Ultimate. The printer has a parallel port only. A parallel to USB cable port was placed on the printer that the computer has no parallel port. Several years ago I installed the printer on this computer and it was working fine until yesterday when I accidentally deleted the printer when I was looking for cancel a print job. I tried the printer function added in the Control Panel, but the test is given a printing error message or disappears without printing. I tried plug-and-play, but the printer is not seen and is not installed. Printer drivers are suspected to be part of windows, but I can't find printer drivers, there is a HP Laserjet III printer installed to LPT1, but this computer has no LPT so not sure how it was installed. Of course, that does not print the printer is not connected to the computer. How can I install this printer to make it work on this computer?

    When you deleted the printer you may have removed the entries between the usb adapter to the computer and the printer.  If you have a disk provided with the adapter which can help you get it going again.  You're dealing with two objects here and it is possible we won't communicate again.  Try another card kind of force the computer to see the new map and help you get the printer working again.  There probably many registry enteries that have been established when you plugged the adapter between the two devices together.  Some of these entries went when you deleted the printer.  One more thing, you can try is to do a restore of the computer to a date before you deleted the printer.  Who will restore the registry at this time and even the printer.  I would establish a restore point before going back just in case you lose something more important with dating back.

Maybe you are looking for