HP7510e all in a habit of scanning

Similar Questions

• My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit.

  My HP LaserJet 3055 All In One does not scan with Windows 7-64 bit. I can copy and print only. Thank you.

  Hello

  Is the printer connected to your PC by USB or network?

  Using the USB connection, you can scan using Windows Fax and Scan software built into your operating system.

  Scanning over a network connection unfortunately supported on Windows7 32 bit only, as you can find listed in the section about network scanning below:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?&objectID=c02539136#A2

  Kind regards

  Shlomi

• Help me buy a new all-in-one which will scan to pdf with preview multipage

  I need a new all-in-one, like the OfficeJet HP 6700 Premium e-all-in-one printer, which I watched in a store.  The box was not clear about the capabilities.

  What I do with old HP all-in-one on an old XP, (11-12 years) old machine is scanning documents to preview multipage PDF, so I can adjust the margins and other things, and if I did not have many PDF files for a multi-page document.  I do this a LOT, I need, it is not a such PITB.    I have not found a way to do this with the printers I have, my new computer so I have to go do it on a slow XP machine in another room.  I can only print at the old printer to my new computer.

  I'm used to using the HP, but those I have is old, my old XP machine (6 years) so it is more reliable and my new computer Windows 7 Professional 64 - bit, and Windows 7 drivers for my old all-in-one are not full function, if they still exist, plus we have several computers and tablets on our network now.   None of the older all-in-one I will do what I need for my new computer, if they'll even install (you look, Dell).

  What I need to know, it's done with Windows 7 on HP OfficeJet 6700 Premium e-all-in-one printer?  (Scan multipage PDF with the HP software preview.) The info on the box was not clear.  If not, is there a model preferably wireless all-in-one that will work for me?  I can plug it into a USB port on my new computer, there are several USB 2.0 and 3.0 ports.  I would like to be able to print wireless from other devices, but this isn't a deal breaker.  I don't want to have to download a few fragmentary shareware or buy a high price to accomplish what I was able to do with the software before HP, on old all-in-one.

  That's what I needed.  Why hell isn't in the ^ & *) & ^ % manual?

  http://support.HP.com/us-en/document/c03584750

• HP Officejet Pro 8600: officejet pro 8600 habit of scanning by plateau

  Hello

  My printer won't scan anything through the plateau on top. I currently have a "HP Officejet Pro 8600' that I use for my mac. When I first put in place more than 6 months ago, I had no problem whatever it is across the Board on top of digitization, but now after the upgrade to Yosemite I got nothing else problems. During my first installation of Yosemite was not able to print or scan but after blocking it with a few updates, I'm not still able to scan documents through the State Bar through the Analyzer of glass I can scan things.

  Any ideas?

  Also when I choose HP scanner allows you to change the presets for photos to documents until after I scanned something by habit.

  Hello @Picture-j and welcome to the Forums of HP

  I'm sorry to hear you had problems, but I will certainly do my best to help with your JO 8600!

  To start, let's see if we can get this upper tray (ADF) to work with a copy. Can you put a document (or a blank sheet of paper to save ink if you do not need a copy of what it is) in the file ADF and ask him to make a copy. Does it work?

  If so, what happens when you try to scan using the ADF? You get an error? The wheels just spin? I would like to know all the details that can help

  If it does that it is, it could very well be a problem with the hardware itself, and in this case, I suggest that you try the procedure described in this document the ADF documents (ADF) does not Pick Up paper to clean the rollers and I hope to pick up the paper.

  Let me know how things are going and we'll go from there!

• 4524 ENVY: Envy 4524 habit of scanning

  Hello

  I recently changed my ISP and they gave me a new router. I set the router upward and printers on wifi and everything works fine, except for scanning.

  The scanner works very well using a generic scanner software but is not a very user-friendly software. So I want to use the HP scanning software.

  When I open the HP Easy Scan it opens fine and the scanner is listed and presets are photo, graphics etc, but when I press 'analysis' it comes back with an error message 'Scanner reported an error' HP ENVY 4520 is currently unavailable. Please check if it is turned on and... »

  Any ideas please?

  Thank you very much

  Hello
  From the Applications folder or its subfolder HP, delete all existing scanning from HP and HP Easy Scan by moving it to the trash, and then empty the trash.
  
  Then install the latest HP Easy Scan below, it will be installed in the Applications folder:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg
  
  If you experience additional problems, ensure that the latest version of the software is installed by following HP Easy Start below:
  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/applications/HP_Easy_Start.app.zip
  
  Finally, make sure that your drivers are up-to-date by clicking the Apple icon, select about this Mac and then press on software update.
  Click on the Bank on the menu bar, click Reload Page, click all update if an update is available.

  Finally, if the problem persists, try restarting your router by unplugging its power for a while, it allows up to 3 minutes to start.

  Once the internet connection returns, restart the Mac and the printer and look for difference ay.

  Kind regards
  Shlomi

• Photosmart 5510 e - all-in - One: Photosmart 5510 - scanning with iMac does not work

  After you have reinstalled the SW printer via the home network, the scan function is not visible when I opened the printer on my iMac. After the first installation has worked well. Then I had to reinstall all the SW on my Mac, so I lost the first installation of my printer. What can I do?

  Hi @HWEB

  What happens when you try to scan? Do you have a message of error before or during transmission scan, or do the software is not open? Maybe you can not locate the software now, or the software cannot communicate with the printer.

  While I wait for you, if the problem occurs when you print from several programs, please follow the steps below and let me know the results of your efforts.

  Scrub / uninstall

  • Open the Applications folder > HP or Hewlett-Packard folder > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers.  Press and hold the Option, control and command, while now the three buttons.
    
  • Click Uninstall.

  Manually uninstall the remaining files potentially - I apologize in advance is not a fun task! I'll try to make it easy to follow. Some of the files described in the following steps can be found, if you can't find one of the files or folders on your computer, do not be alarmed.

  Move the files or folders to the Recycle Bin, drag and drop

  • Macintosh HD/Applications / /Hewlett-Packard folder
  • Macintosh HD/Library/Application Support /- delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Caches - delete all files and folders on HP/Hewlett Packard
  • Macintosh HD/Library/Documentation/Help /- delete all files and folders on HP/Hewlett Packard
  • MacintoshHD/Library/Frameworks/HPServicesInterface.framework
  • MacintoshHD/Library/Frameworks/HPSmartX.framework
  • Macintosh HD/Library/Image Capture / TWAIN Data Sources /HP Scan Pro
  • In Macintosh HD/Library/Image Capture/Scripts - delete all files and folders on HP/Hewlett Packard
  • In Macintosh HD/Library/Preferences - delete all files and folders on HP/Hewlett Packard

  Move the Macintoshloginwindow.plist on the desktop. NOTE: Does not delete the loginwindow.plist file during the manual uninstallation may cause uninstall be retained.

  • In Macintosh HD/library/printers/hp - delete the folder
  • In Macintosh HD/Library/StartupItems, drag the following files in the trash, IO HP and HP trap monitor
  • In Macintosh HD/users/username (this should have a symbol of a house next to him) / Library/Preferences, drag the following files to the Trash: * all files starting with com.apple.print, * all files starting with com.hp, * all files beginning with Hewlett-Packard, * files starting with HP or hp
  • In MacintoshHD/users/USERNAME/Library/printers, drag all all-in-one printers listed here in the trash.
  • Drag the icons of HP from the dock and drop it onto a blank space on the desktop. The icon will disappear.

  Close all open windows.
  Turn it back on.
  Empty the trash.

  Reset the printing system

  1. Click on the Apple icon ( ), then click on System Preferences.

• HP Deskjet 3050 has habit of scanning.

  DJ 3050 has 611G is new. It will print and copy but not scan from the Control Panel printer or from the HP software interface. I do not use the wireless feature. I'm directly connected to my computer via USB. I've updated my software and drivers. Still no luck. I tried the HP diagnostics but cannot get the sectio windows and a mistake says it won't scan using (WIA). The diaganostics will allow me to pass it but then stops to the next section.

  Original question was as the "printer can't find computer.

  See if you can scan using the information here:

  All-in-one printers

  Win 8: c03511921 http://support.hp.com/us-en/document/c03511921

  Win 7: c03476857 http://support.hp.com/us-en/document/c03476857

  Win Vista: c03517146 http://support.hp.com/us-en/document/c03517146

  Win XP: c03517150 http://support.hp.com/us-en/document/c03517150

  Multifunction LaserJet printers

  Win 8: c03755019 http://support.hp.com/us-en/document/c03755019

  Win 7: c03584750 http://support.hp.com/us-en/document/c03584750

  Win Vista: c03584647 http://support.hp.com/us-en/document/c03584647

  Win XP: c03584350 http://support.hp.com/us-en/document/c03584350

• HP All in One Photosmart C7280 scan issue with Snow Leopard

  Hello

  I bought my wife a new cool Mac mini. So it comes with Snow Leopard. We use it for our activities with an HP printer all in one Photosmart C7280. Unfortunately the scanner does not work. I did the mistack to install HP driver from the HP website and read after documentation of the HP Web site (probably like all users). So I decided to completely re-installed the machine (as it was new) and follow the installation procedure for HP who, to say that the pilot is coming up with Snow Leopard. After the new re - install, so I installed 10.6.1 patches and last HP driver from the site Web Apple as mentioned in the forum. (version 2.2)

  The printer is correctly detected, but there is no way mak it work the scanner on HP procedures. The scanner is not recognized at all, and the printer configuration window is not appearing the scanning tab as it is supposed to. It seems that the scan part it does not work in one.

  We love HP printer and it will be great to see it fixed.

  My network configuration is very simple:

  -192.168.0.176 is the IP address of the HP printer with 255.255.255.0 netmask

  -192.168.0.106 is the MacMini (3.1) IP address mask subnet even

  All connected using a router D-Link (5 ports).

  Printer/scan function works perfectly on our other Mac systems that are under Leopard. I tried to install Leopard on the new mac mini, but the installation DVD that we have (10.5.4) does not start successfully on the machine. We are so stuck.

  Any help really appreciated

  Jean-Marie

  Hello

  Good news, it worked. But I think that the problem came from the D-Link router that I used. Upnp has been set to allow, and it seems he mistook the discovery of the device. I proceed to turn off and the live showed you me overdrawn the printer on the network. I installed it, and the scanner has been recognized.

  If I turned my back to Activate Upnp, the scan function is dead. Thus, it probably is a problem of compatibility between the leopard to snow and this Protocol. What is strange, is that our whole system of leopard work with upnp enable or disable.

  Anyway thanks a lot for your help!

• All-in-One 6310 all lights flash when you scan multiple pages

  When I scan more than 8 pages, all the lights on the 6310 flash and the State a power reset is necessary.  I also have the same result when trying to send a fax from page 14 of the fax journal.  For me it seems to be running out of memory, but I thought that he used the PC for this.  I am connected via Ethernet.  When I scan a small amount of pages, everything works fine.  When I fax directly from the 6310, all 14 pages communicate very well.  In the manual or online that seems to cover this issue, there is nohing.  Has anyone seen this and it is resolved or it's just a limitation of the product?

  This can happen if the power cable is connected to a surge protector or a power strip. try to plug it into a wall outlet directly if it is not.

• 2540 HP all-in-one series - cannot scan

  I recently bought a series of all-in-one HP Deskjet 2540 and the booklet of instructions with it contains NO information on how to scan a document. Anyone can shed some light?

  Hello draffel,

  Welcome to the HP Forums.

  I see that you have a problem with the attempt to scan to your computer.

  I'll give you instructions for all supported computer operating systems that provide detailed instructions on how to scan with HP software or without.

  Please click the following link to view theDocument, then once in the document, select the operating system that is located on your computer and follow the instructions.

  Please do not hesitate to write me with any other questions or concerns.

  See you soon,.

• HP Officejet 6700 Premium all -: print OK, but not scan

  I just replaced my old HP computer with a Windows 7 Professional 750-055xt HP computer and my printer scans is no longer. When I hit the scan button I get this message: "open the HP utility. Under scan settings, click Scan to the computer and make sure Enable Scan to computer is selected. "I don't know where to find the HP utility, so I am dead in the water. Any ideas where I could find it?

  HP technicians could not track down the problem by using the remote, so I took my computer and printer to the Geek Squad at best buy. The GS has found a couple of infections that prevent the printer to install the required software. Once the infections have been wiped out and the software installed, everything was fine. All in one day.

• Photosmart 6520 all in a single pri: scan to email error

  I am trying to scan to email, but an error message connection server 403 error. There was a problem connecting to the server.

  Help. I need to scan documents.

  Hey @twoz923,

  Thanks for posting in the Forum from HP Support.

  I understand that you are not able to scan to email using your 6520 HP Photosmart e-all-in-one printer.  I would like to help.  I have a few troubleshooting steps that can restore this feature.

  First of all, is your printer connected to your wireless network?

  • From the front of the printer, press the wireless icon -make sure that it displays an IP address indicating that you are connected to your network.  If so, proceed as described below, if you are not connected, click here to learn how to fix.

  Then, are your webservices enabled?

  • Front panel of the printer, press the icon shown in the image below:

  

  • If the printer displays an address [email protected], your Web services are enabled.  If this isn't the case, tap Activate Webservices and press OK to enable automatic updates.

  If you encounter a problem with the activation of the Web services, I recommend that you try to set a manual DNS address for your printer. Often, I find this useful step when working with printing and scanning to E-mail configurations.  It will strengthen the ability of your printer to make a secondary connection with your router.  My friend @PrintApper has asked the steps to set a manual DNS in a post on the Forum - click here to access and scroll down for 'E.      Set a manual IP/DNS server settings of your printer. "

  Once you have enabled Web services, tap the Scan icon to complete your analysis of the configuration of e-mail.

  Please let me know the result of your troubleshooting by responding to this post.  If you encounter other obstacles of installation I am always happy to help you.

  Have a great day and feel free to give me a virtual h.o.t. by clicking on the 'Thumbs Up' icon below, if I solved your problem.

  (edited for formatting)

• C7280 all in one has two scanning options and has no option for scanning to e-mail. He is used to.

  Usually, if I turn off the all-in-one scan options back, but now only two options appear... scan and reprint and scan to memory device.   I need to get the option scan to e-mail and scan to file return.   Please be explicit as I am chanllenged of the computer.

  It seems that not all the options are in the analysis... installation options.  Try to check all the parameters of the analysis options to ensure that these file type options are not present.  So, please take a look through the information below the link.

  A 'no. Scan Options' or "scan settings are not defined" Message displays on the all-in-one

  I hope this can help you go back with the right scanning options.

  Jason

• HP Envy 7645 e-all-in-one-seri: screen scanning / Scan to computer / select a computer

  The screen scanning / Scan to computer / select computer

  "Select computer" shows a computer that no longer exists... How can I remove the computer? Before getting rid of the computer, the printer software has been uninstalled.

  Hello there! Welcome to the forums @SandyLY 

  I read on the way in which you no longer have a certain computer, however, the printer it still lists as a detection option of.

  1. I'd say trying to power cycle the network devices first, which can remove this PC in the list of printers:
  Turn off the printer and the computer and unplug the router for 1 minute (do not press the buttons on the router).
  Plug the router back in and wait another minute, turn on the printer and the computer.

  Check the printer to see if the PC you have more is always listed or not.

  2. If the PC is still listed on the printer, check out this guide to set up the scan of the computer to the correct computer:

  A "found no computer', 'Necessary connection' or 'unsuccessful analysis" Message appears for HP ENVY 5640, 5660, 7640 and Officejet 5740, 8040 e - all-in - One Printer Series

  Good luck, I hope this helps

• HP C7280 All in One printer: HP Scan of the error using HP C7280 all-in-one printer

  I was scanning documents successfully until recently.  I use a Mac with OS X 10.7.5 and receive the following error message when you use HP Scan.

  Cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.

  -Restart the program.

  -Close all programs that might be using the device.

  -Restart the computer.

  I tried to download several drivers without success.

  Any help would be greatly appreciated.

  Hello @kellycc,

  Welcome to the Forums of HP Support! I see when you try to scan with your HP Photosmart C7280 with your Mac running the 10.7 operating system, you get an error "cannot perform the analysis because another program has control of the HP imaging device. Try the following steps. After each step, try to scan the image.'.

  Complete the following steps:

  Scrub / uninstall

  • Open the Applications folder > folder HP or Hewlett Packard > Uninstall HP
  • Click continue, click on one of the printers in the list.
  • * Only perform this step if you have not all other HP printers. Hold down the command, Option , and command, while now the three buttons.
  • Click on Uninstall.

  Reset the printing system

  1. click on the Apple icon ( ), then click on System Preferences.

  2. in the hardware section, click Print & Fax/scanning. The Print & Fax/scanning dialog box opens.

  3. make a right click (or Ctrl + click) in the left panel and then click on reset printing system...

  4. click on OK to confirm the reset.

  5 type the name and the correct password.

  6. click OK to reset the printing system. The Print & Fax dialog box shows any selected printer

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol...

  Repair disk permissions

  1. on the Dock, click Applications, then utilities.

  2. double-click click disk utility.

  3. highlight your hard drive / partition on the left (by default this is "Macintosh HD").

  4. click on the button to repair disk permissions at the bottom of the window.

  5. once the repair is complete, restart the computer.

  Restart the printer. Now, you will need to install the printer driver using the Apple updates. Click on the link below and follow the instructions on the screen:

  Installation of your printer driver HP and software for Mac OS X

  I hope this helps, please let me know the result!

  Thank you