Hp7520 prints a fax several times

My HP 7520 just started to print a fax several times. It was working fine before this. It seems to be of those who fail after 3 attempts to fax service.

Hi chitchman7000,

Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

Sorry to hear that you are having problems with the printer print fax several times.

Please remember that you have the printer power cable connected directly to a wall outlet and not a strip bar. HP printers have built in surge protector and if you have connected it to a strip bar, the printer will NOT get all the power it needs to function properly and it could cause communication problems with the part of the printer fax.  Here is a document that explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

Please note that the printer listed in the document is a LaserJet printer, and it is used only as an example and that the document is intended for HP products in general.

Please also check the telephone cable that is plugged into the number 1 slot in the back of the printer to make sure it's the appropriate cable two connectors of copper for the fax.  If you remove the cable from the phone and look at the transparent plastic at the end of the cable plug, you will be able to see the copper strips. If you see 4 strips then you have poorly connected phone cable and this could very well be the question.

Please do not hesitate to write me again and I'll be happy to offer more assistance.

Thank you for your time.

Tags: HP Printers

Similar Questions

  • OfficeJet4500 printing same page several times

    OS: Windows 7

    Device: All-in-one OfficeJet 4500

    Connection: wireless

    I recently published a several page article.  The printer has lack of to halfway ink, and I have replaced the cartridge.  Then print a page alignment and aligned on the cartridge.  He then printed the final part of the last scheduled task - but stopped before the last page.  I tried to cancel the document, but it does not appear in the print queue.  I shut off the printer, unpluggeed and back on it - she picked up during the same endgame as before, then stopped before the last page.  I tried to leave unplugged for a long period of time (several days) but no matter what, if I turn it on it goes through the same process.  Please help - I'm stuck!  Thank you!

    Run the HP Print & Scan Doctor program. (link)

  • Vista 64 print spooler crashes several times.

    I can't get my on my desktop print spooler to restart long enough to print a document on one of my 5 printers.

    I somehow manged operate occasionally, for days and then suddenly it stops and does not, restart until I kick a dozen times and do everything else. (I don't remember technically exactly what I've been able to do to make it restart except for a rare solution on the internet!) Once I have redeleted a registry setting and reinstalling all my printers (according to a web article) and it worked, but only for a few days.

    Hello

    Clean the General corruption and repair or replace the damaged/missing files.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    CheckDisk (chkdsk) runs at startup.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    Those are the prerequisites.

    ==================================

    Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
    the latest driver).

    Check Mr. Fixits here and if you use the other methods go back and try again later.

    Problems of print and error - a Mr Fixit of printing
    http://support.Microsoft.com/GP/printing_problems

    Solve printer problems - a Mr Fixit
    http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

    ------------------------------------------------------
    Logon as administrator

    Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

    You can copy and paste each line except those brackets and press ENTER after each.

    net stop Spooler

    (echo suppression of all print jobs)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    del/q %SystemRoot%\system32\spool\printers\*.*

    net start Spooler

    (sound Done!)<-- you="" should="" see="" this="">

    ping localhost n 4 > zero

    Another way
    http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

    Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
    http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

    If you use Control Panel - Classic - printers

    Try after unplugging your printer if necessary.
    -------------------------------------------------------------

    Also check the spooler print and its dependencies and addictions Service.

    Print Spooler service
    http://www.blackviper.com/WinVista/services/Print_Spooler.htm

    How difficulty Windows Vista print spooler starts do not
    http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

    ------------------------------------------------------------

    Check this thread if necessary - to stop and erase the spooler

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

    and here
    http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How can I get my Hp officejet 6700 to print the date and time on the fax confirmation page

    How can I configure my officejet 6700 premium to print the date and time on the fax confirmation page?

    Hello

    As long as the date and time is set, it should automatically appear on the print.

    Is the date and time set correctly on the printer?

  • I inserted my memory card in my printer to put pics on PC. I've done several times, but today it won't import my photos. Any ideas as to what I did wrong?

    I inserted my memory card from my camera into the printer to import my photos. I've done several times, but today it does nothing. Any ideas what's happening?

    I inserted my memory card from my camera into the printer to import my photos. I've done several times, but today it does nothing. Any ideas what's happening?

    =======================================
    The printer should work as in the present case...
    a USB Media Reader if you're going to... Start / computer...
    the drive should be recognized with a drive letter.

    Something like... "removable disk (e :))" (if the printer has) "
    several slots for different size cards... There will be several
    Removable disks.

    If you click left of the drive letter that corresponds to the
    slot of that memory card is located in the directory should appear
    and allow you to open the various folders, find pictures
    and copy and paste to a folder on your hard drive.

    You will need to restore the previous function...
    Adjust your AutoPlay settings.

    Windows Vista - Troubleshoot AutoPlay
    http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

    Windows Vista - AutoPlay: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

    Windows Vista - How to change the auto run settings
    http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  • I installed the printer coupon several times but every time I want to print, nothing happens.

    original title: Coupon printer

    I installed the printer coupon several times but every time I want to print, nothing happens.  I followed all the instructions, but when the coupons are supposed to be sent to my printer that they do not print.  What can I do?

    Hello

    If you have problems with the software or hardware contact their manufacturer for appropriate assistance

  • I try to print a document from office.3 several times on a sheet of paper A4

    I want to print a document I created in Office.3, but I want that it shrunk to fit on one sheet A4 several times so I can cut it in flyers. I do not seem to have the options of printing than others using XP, who suggested using the zoom in the print as a response window.

    You mean Open Office 3?

    If so, they will help you in their Forums, link below:

    http://www.oooforum.org/

    See you soon.

    Mick Murphy - Microsoft partner

  • upgrade to Win7x64 and now I have my Lexmark 2470 printing problems. I reloaded the software several times and still cannot print.

    I upgraded to Win7x64 and now I have my Lexmark 2470 printing problems. I reloaded the software several times and still cannot print. Any suggestions?

    Hey! Try this link

  • my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    original title: printer driver

    my printer is not recognized by my computer it says driver missing, I reinstalled it several times still does not

    Is what printer? Where did you get the driver?

    That you download and install the * good * driver for him? It must be for Windows 7 and Windows 7 32-bit or 64-bit Windows 7, depending on what you are running.

  • I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times unt

    I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

    lrfrustrated wrote:

    I just downloaded Adobe XI on my macbook air, and now I can't save or print the PDF files. Don't let me do print - save as PDF, and if I do record as I get a message indicating that the file is corrupted. I had NO PROBLEMS of all do this several times until I downloaded the new version. I uninstalled and reinstalled it, nothing helps. I am super frustrated.

    Print > save as PDF - use an excerpt (part of Mac OS X), so Adobe Reader should have no effect on that at all.

    As for the error "file corrupted", simply uninstall the Reader app will not affect it. Follow these steps:

    Mac/HD/Library/Internet Plug-ins

    Trash the files AdobePDFViewer.plugin and AdobePDFViewerNPAPI.plugin

    Mac HD/Applications

    Trash the application Adobe Reader

    [user] / Library/Preferences

    Trash the com.adobe.Reader.plist file

    To access the [user] / Library, hold down the 'Option' and click on 'Go' in the FInder menu.

    Mac HD/Library/Application Support/Adobe

    Trash the drive (full record)

    Empty the trash.

    Download the installer FULL here: http://get.adobe.com/reader/enterprise/

    Quit your browser, and then reinstall the drive.

    Run it from the Applications folder and agree to the license agreement.

    You should have no problem with Safari PDF files download.

    Unfortunately, ANY PDF file that says it is damaged.... You will need their trash.

  • OfficeJet 6500 E709a: printer prints several times.

    Printer doesn't seem to know that he has finished the work. The printer indicates work being 20% when it is indeed quite finished is complete.  Then it goes to start printing the same job from the beginning again.  In doing so, he maintains unless I have remove the paper in the paper tray.  The only way I managed to make the printer quit is by removing the job

    Hi @DaveG1,

    I see by your post that print to the printer retains that same work on it again once, disappeared from the queue. I want to help you.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +.

    Then click the Add button.

    How is the printer connected? (USB, Ethernet, WiFi)

    If you appreciate my efforts, please click on the "Thumbs up" button below.
    If there is anything else I can help you, let me know. Thank you.

  • HP Laserjet 1018: Printer light blinks 15 times but does not print

    I have 2 printers, my work horse HP laser jet and a Brother Multi printer/scanner/fax etc. Both printers work correctly when connected (usb to LJ1018 connection) or wireless (Brother MFC) to my notebook running windows 7 lite.

    My desktop HP compaq core 2 duo machine is connected to two printers with the help of a brother network cable and a usb cable for the LJ1018 but I decided to connect the brother wireless to my network, because it allowed me to use my netbook without having to plug in a usb or network cable. I also created my office to connect wireless to the brother and it works fine, but now I find that I can not use the LJ1018 that I think only has a usb cable connection. Although the computer says the printer is connected it is flashing the light several times - about 15 but does not print anything. I tried to reinstall the USB driver but this makes no difference. One thought I have is that Windows XP cannot deal with a wireless connection, but also a connection usb, if yes can I have go back to wired connections?

    Hi @petec48,

    Personally, if it is not broken, do not fix.

  • Set Up for HP OfficeJet 4620 prints to fax only

    Try to implement OfficeJet 4620 wireless laptop running Windows 7.  Wireless set in place works.  When a document is printed, a fax page.  Document never print to the printer.  After you set up the printer name is preceded by FAX.  Have deleted the printer and re-installed several times.  Do not see possibility to do something different.  Any help appreciated.

    @GuyNameDavid, sorry that you experience this problem with setting up a default printer.

    Try uninstalling and reinstalling the software and drivers. Do you still have the CD?

  • 2450deskjet wireless printer: same message each time I try to download the software for dj2540

    I tried several times to get the software downloaded to set up a wireless printer. I do not have a pc cannot use the cd delivered

    We gladly invite you.

    Wireless live for 3 seconds button, that prints a report Direct wireless, which includes live wireless password.

    Kind regards

    Shlomi

  • Office Jet 8610: Print the faxes that I missed

    How to print the actual faxes that I've not received when I was out of ink printer? I have a list of fax numbers - tried - to send faxes for me, but what I can see is the fax number, that they sent, the date and time they sent and the total number of pages. Any ideas? Thank you! StarSema

    Welcome to the HP community @StarSema,

    I read your post on how you're looking to print the faxes in memory of your Officejet 8610, and I hope I can help you. From my memory, you should be able to access the Fax Menu in the configuration Menu of the printer and look for the history of Fax and reprint the faxes in memory.

    If this does not work, or if you have any questions, let me know and I'll do my best to help.

    Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

    I hope I helped!

Maybe you are looking for

  • Need advice on the Satellite M60-159

    I intend to buy the laptop Satellite M60-159...What someone has it, and it of a laptop good or bad, should I go for it? I'd appreciate any comments!

  • Qosmio G30-126 - black screen after the awakening of the mode standby

    Hello If I just put my Qosmio G30 - 126 mode (button or just close the housing cover) sleep it start back only with black screen. HD is being run but nothing else. I have to turn it off and start again with the start-up. Of course come screen with me

  • Is there a way to output multiple waves to the soundboard

    Work on two projects that could benefit from multiple sounds played at the same time. 1 is a C64 SID emulator. The SID has 3 voices each with their own ADSR waveform. I can generate a unique waveform with the attack and degradation and decent sound o

  • Linearization of thermocouple software

    Hello I use a type K thermocouple which milli-tension. This voltage is amplified using a DC voltage amplifier. I measured the output of the amplifier with a voltage meter. The temperature was measured with a simple thermometer. For a temperature of a

  • Microphones capture multiple producers/consumers

    I was getting buffer overflow problems when I used foolishly multiple "Capture sound" Express VIs to listen to several pickups and treat them. I then created a structure of producer/consumer where I realized 2 signals (2 producer loops) and loop them