HP8600 and 8610: print head for 8600

Similar Questions

• 8610: print head seems to be missing

  Hi all.

  I have an about 10 months and not particularly heavy 8610 AIO printer used.  Now, I get the error "Is missing or has no print head -" error 0xc19a0003.  I reinstalled the cartridges and out of the 3 times print head according to the HP KB, but nothing helped.

  Can I imagine that this part is under warranty and if so someone knows how can I communicate with HP that I have trouble finding their the United Kingdom phone number and/or e-mail address.

  TIA

  Kenny

  Kenny try this link .

• Large format HP Officejet 7500 a: print head for my large Format HP Officejet 7500 a

  Hello

  I have a printer of e-all-in-one large Format HP Officejet 7500 a - product E910a No.: C9309A serial no: [personal information deleted]

  I need to replace the print head.

  I found this on HP page http://support.hp.com/us-en/document/c02271166 they said it use the CN643A

  On a support HP cat, what they said use CN642A.

  On another page of HP, they said use CH638A.

  The CN642A is now 5 HP564 ink cartridges, but still the HP web page said that it will work in my HP Officejet 7500 a large format using the HP920 cartridge.

  I found other heads of printing on the web article CD868-30001 model number and on the web page of HP were unable to match the part number for a list of available models.

  Now my big question including the number of pieces to the correct print to my printer head?

  Hello

  I offer my apologies. It should have been if your printer uses 4 ink cartridges, type CN643A

  Please click HERE to access the document to see what print head fits into your printer.

  Check under Solution 4: replace the print head.

  Step 2: Order the print head

  He states:

  If your printer uses 4 ink cartridges, type CN643A

  If your printer uses 5 ink cartridges, type CN642A

  Please ignore my previous post where I suggested CN642A.

• New print head for V715w?

  Anyway is to buy a new printhead for Dell's Dell V715w printer (or someone else)? The current print head is therefore nothing good, I have about $ 150 of ink on the spot and I would use it.  I can't believe that Dell does not place a small piece of plastic/silicone and expects me to just buy a new printer.

  -Aurélie

  Aurélie,

  We found that the price of a print head is the price of a new printer. If the printer is under warranty, contact Dell.

  If this isn't the case, then try these procedures.

  Cleaning the printhead Dell V313w V515w, V715w, P513w and printers P713W AIO

  Solving the problems of print head on the Dell V313w V515w, V715w, P513w and printers P713W AIO

  Rick

• Print head for printer HP6500

  I have problems printing with my HP6500 printer.  We rinsed the printhead before and it worked.  Put us the printhead in water and I bought new ink cartridges and it still does not.  We think that perhaps a new printhead will take care of the problem.  What do you think?  How much is a new printhead for a printer HP6500?

  Hello

  The print head is not available outside HP.

  You can call the HP Technical Support to know the price of the print head.

  Please call the HP Technical Support for assistance.

  If you are to US, toll free # is 1-800-474-6836

  If you're not in the United States, and then connect to www.hp.com , bottom left it is an icon of the world map, click it and then select the region that you belong to, which would then provide the support options for you for this region.

• printers HP 8500 (A910a): print head for white stripes of printing cyan horizonnally

  HP 8500 (A910a).  No. Windows7, no change in system error message. The system is hp Pavailion Elite m9150f

  Prinrt instakked wired Ethernet networking

  Printhead print white strips horizontally on cyan and green on Test patter diagnosis 2.

  Checked the blanck/cycan printhead. Cycan nozzles are dirty.

  Can I clean (how?) or do I replace the print heads? If so, replace a print head, or both?

  After the old replaced print head, printer replrts the cyan cartridge is low. It's a brand new cyan cartridge. How can I get the printer to consider new?

  To answer the first part of your question, you can clean the heads printing either through the front of the printer or do a manual cleaning.  This document here will focus on horizontal lines in printing and show how to correct the issue, clean the print head through the façade and based on the printed report, the print heads to replace.  The other way to clean the printhead contacts is to do a cleaning of the contacts of manual.  Here a link to a document that shows a way to clean the contacts manually.

  The cartridge error message, I would like to look at this document. He will wear the error message you are getting and troubleshooting steps of the offer to take to try to solve this problem.

• Which current HP printers (Photosmart?) have removable print heads for cleaning?

  After my 6515 Photosmart suffered a premature death due to a clogged printhead black, I did a lot of research to know what to buy to replace.

  I looked at other brands, too, and unfortunately, there aren't has no easy answers anywhere.

  I feel that I am more familiar with HP, not to mention the offer of 564 papers of ink and photo that I always have on hand.

  Are there current Photosmart printers who have the leverage that allows you to easily remove the printhead to clean if it clog?

  I would really like to find that point, but so far, having this option is not in one of the specs I've seen.

  I would not be able to print photos, so it would be good if there is a Photosmart printer that this option was.

  Thanks for your help!

  Photosmart 7525 has removable heads, it is basically the same model as the Photosmart 7520 sold elsewhere.

• Print head for Officejet L7380

  Last week I went to buy some C9381A and C9382A printheads at the service of hp, but they ask us to give back the old printheads, it is true? My printhead is also outdated. If I don't give them, I can't buy a new one. If this true, I won't buy your product again.

  I don't know why this guy is forcing them to return the old printheads. Anyway, you can buy it directly from HP using HP Shopping site.

  Printhead Black\Yellow

  Printhead Cyan\Magenta

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• Pffice Jet Pro 8600: need to find the print head tool

  Where can I find the tool of the print head for my HP 8600...   I am trying to clean the print head I'm having problems with certain colors... especiallly RED...

  In the paper here troubleshooting steps can help solve problems with your Officejet Pro 8600 a color print does not correctly.  The print heads can be cleaned of the controls on the front panel.

  Solution 2: use an automated tool to clean the print head

  Follow these steps to clean the print head.

• What is the part number of replacement for a HP6350 while a photo printer print head?

  I 6350 printer that is less than 2 years old and the print head will be no printing cyan and magenta and fails alignment.  I cleaned the print head several times through the diagnostic tool.  I even manually cleaned using water with no luck.  HP says that it needs a new print head and is not available due to out of production!  What happened to make parts for 7 years as IBM!  I won't buy another new printer every two years.  Home use photo printing and small documents.

  XP Pro OS on an IBM Net Vista suystem.

  The print quality report states:

  Model number: HP Photosmart C6300 series

  Serial number: MY93N9F0GB0544

  service id: 19135

  area of the printerPX): 2

  total number of pages 2052

  firmware: EVM1FN0836AR

  patch review: 10

• HP photosmart premium C310: cannot print black despite installing new print head and cartridges

  Have completed all troubleshooting steps right through the replacement of the ink in the print head with a brand new and of news. Desperately the still not printed in black.

  Is there anything else I can do?

  Hello

  Please try to CLEAN print head for at least 3 times.

  On the printer control panel.
  1 > tap Settings, then
  2 > touch tools, then
  3 > touch clean printhead

• OfficeJet 6500 wireless needs of solution for the damage to the print head as possible.

  I have recently change ink in my all in one printer officejet 6500 wireless and now it has an error message indicating that the print head is damaged. Please help me I have a paper due soon

  Hi tlawsonfrancis,

  Officejet 6500 what model do you have (E709 or E710)?

  If you get an error on a bad printhead you can try to remove the printer and then turn the printer without it in the cycle. Wait for the printer to you asking to reinstall. If you continue to receive the error you can contact our technical support at the 800-474-6836, and they can helo you buy a new print head for your printer. If you do not live in the United States / Canada region please click the link below to get help from your region number.

  http://www.HP.com/cgi-bin/hpsupport/index.pl

• C-309 g HP Photosmart Premium: Incompatible print head - new cartridges for C309g

  Cleaned all the contacts on the print head as shown on the HP website that I wasn't getting any 'black' to get out.  All other colors worked very well.  Noticed that there is a generation of black ink on the print head upward.   Put everything in.  It did the alignment, but he does not terminate.  I had a recording error to restart the printer.  This and now I have and incompatible print head message.  Open a new ink cartridge and I still get the same error.  In addition, all went out again and verified, and there was ink black build-up on the contacts on the print head again.  Any suggestions?  Ink cartridges HP isn't some off the mark.

  Try these Youtube videos.

  https://www.YouTube.com/results?search_query=C309g+PRINTHEAD

  Find out more if necessary.   If this does not work, your printer is toast.

• Alignment of printer heads, failed to 7680

  The two print heads (HP88) have been replaced today. C/M that works very well. The K/Y seems pretty faulty. My K/Y Printhead and ink cartridges are HP brand. After completing the installation of the print heads, the window of the printer showed "alignment failed". So I ran the alignment and line tools. Still have the same error. Print only C/M.

  The Self Test diagnostic page reads for the health of the print head: good. Date at the end of the 2014-03-26 warranty and installation 2012-07-15

  I tried pluggin and unplugging the printheads. I ran the clean print heads (used too much ink). Still no black or yellow printed ink.

  I ran the utility Mac HP program and health of the print head for the B/Y now says "Fair"... It's strange how what he says good about an hour ago (it should because it's new).

  Any suggestions on what I should do?

  Mac Pro, OS 10.6.8 20 GB of ram

  HP printhead passable health utility

  

  

  Two hours later, after swapping in old (in order or return B/Y printhead to the dealer), I also get both GOOD. But it will not print black or yellow. The alignment still does not work. Don't see the magenta lines.

  

  Now it's back to the FAIR. It's really frustrating. I'll just pack.

  I had to show this. Now TWO new heads are BAD

  

  I should have done this in the first place: I just called HP technical support and the gentleman said HP can't even stand the 7680 more and the printer is probably dead. It's that old (bought in 2007). He offered to the extended 8600 Officejet more a strongly reduced guaranteed new of 3 years with free return shipping on exchanges in the my (now deceased) 7680. I'm happy to keep that thing out of landfill. Now, I must return this second set of printheads.

  Although I'm bummed to get rid of the 7680, I am impressed by the HP support to take into account the factor of the v3 and the disappointment of customers. They did everything quite transparent and somewhat painless. .