HP940c does not web print after upgrading to Windows 7

Similar Questions

• Cannot print after upgrading to Windows 10

  Pleae help, I can't do my printer print after upgrade from Windows 7 to WIndows 10.  I have a HP officejet Pro 8600.  I downloaded a new drivers, etc, and nothing works.  Help, please

  Hello Kathy,

  http://support.HP.com/in-en/drivers/selfservice/HP-OfficeJet-Pro-8600-e-all-in-one-printer-series-N911/4322914/model/4323658

  The link will help you to download the latest drivers. Make sure that your operating system indicates Microsoft Windows, Microsoft Windows 10. If it shows any other OS, please click the Edit link to the right and select Windows 10 in the menu drop-down, and then click Update. After that Windows 10 if poster as your operating system, you can click on the download to start button to download the latest drivers. I hope this helps!

  Although I am an employee of HP, I speak for myself and not for HP. * say thank you by clicking on the "Bravo!" Star"located on the left * make it easier for others to find solutions, marking my answer to"Accept as Solution"if it solves your problem.

• DeskJet 1050 - J410a: HP Deskjet 1050 does not print after upgrade of Windows 10

  Dear forum,

  I recently upgraded my HP Windows OS 8.1 for Windows 10 desktop computer. My deskjet 1050 printer, which worked fine before the upgrade, does not properly more print after the upgrade.

  I used HP Print and Scan Doctor several times, indicating no any problems. I am able to scan documents, the question is limited to printing. I also deleted and reinstalled the drivers at least 2 times (and restarted all systems on a regular basis).

  • A "test print" works very well.
  • When I print a PDF from the edge, the printer creates output but not good quality.
  • When I print an office word document, pages came out empty.

  3 cases have a common behavior, whenever I get an error message. "Morning maken puts printer niet mogelijk. Duch is for "cannot connect to the printer.".

  Do you have any tips for me?

  With sincere friendships.

  Pieter

  HeyPieter_Belgium

  Welcome to the HP Forums, I'd love to help you with printing problems you encounter. Although I am not sure what is cause of the error of communication, or of poor quality, I suspect it has something to with the pilot and the recent upgrade. I suggest to uninstall the software, remove the Chuck from the properties of the server, and then put it back using the printer Installation Wizard. I will list the links and instructions below to help you in each of these steps.

  HP printers - uninstalling the software of the printer (Windows)

  Remove the driver from the print server properties:

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 -select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Download and run the Installation Wizard for printer: www.HP.com/go/Tools 

  If this solves the problem, please indicate your post as solved by clicking on the accept button Solution below. If you need help, let me know!

  Thank you.

• OfficeJet 7410xi: computer does not have USB printer after upgrade to window 10

  The computer does not find the USB connected printer (Officejet 7410xi) after having modernized the window system 10.

  Hello

  Download and install the following software:

  http://ftp.HP.com/pub/softlib/software13/COL30951/MP-110165-3/AIO_CDB_Net_Full_Win_WW_140_408-5.exe

  During SOUTH clck the link (4th one) software selection step and uncheck the Bing toolbar due to incompatibility issues with MS Edge, then continue with the installation of you

  Please let me know the results,

  Shlomi

• Portege R30 does not SSD start after upgrade SSD and HDD

  Hello

  I have improved my Portege R30 - A to add a second SSD (Crucial M550) replace the optical with the new SSD drive with caddy.

  But now the system does not start automatically from the original SSD.

  I could press F12 while turning on my laptop and make it appear the start guide. Here I can see my original SSD and I can boot from it properly.

  In order to boot in the BIOS, I see only the HDD/SSD, USB, ODD memory... It doesn't gives me the possibility to choose between SSDS.

  In any case when I boot in this way than getting blue screens after awhile in win7.

  I tried to install a HARD drive as the second drive instead os SSD and her resut is the same.

  Is that what I can do to solve this, now I have to use the second drive as an external USB drive.

  Thank you

  Hello

  This ODD of SSD/HDD replacement is not always possible and in many cases, the BIOS will not handle and will not recognize the new HARD disk correctly.

  That I can remember some old laptops Toshiba Tecra and Portege that supported the functionality of Slim Select Bay were able to manage the 2nd HARD drive instead of driving WEIRD, but this was not possible due to the available selection slim Bay.

  In your case it looks like the laptop so that the BIOS does not support this function and, therefore, the additional SSD/HDD isn't recognised correctly.

• Equium M40X does not work properly after upgrading the BIOS

  OK, well... I'm not a computer scientist, but I have a bit of trouble on my hands and I don't know where to go for the right help, so I came here.

  Today I started my lappy to confront an illuminous Green Office... not all it is green just of great spots here and there. Happened to me before, but it disappears after about 15 minutes, but today his guarded it usually hours and is still as he.

  I looked everywhere on the net for a possible fix but nothing helped, even though I've heard somewhere that an update of the BIOS might do the trick, so natually, I did... I came here and searched for my Equium M40X, found, downloaded and installed the latest version...

  but now I have a screen with a resolution of half of what it should be, it went from 1200 x 800 or something like that... to 1024 x 786 and I always get the green screen problem... the program toshiba provided for the update of the BIOS does a backup file (BIOS. (BAK)...

  I can't restore the old BIOS would set the screen resolution, but I'm just helpless as to how I go about it. I find the file, but I have no way to open/run it

  I've had this laptop for about 2 years now, I know probably just getting old and a bit tempermental, but if theres no way you people out there can help, I would much apreciate it :)

  Thanks a bunch - Ash

  Hello

  I Don t think the biosupdate is the reason for the reduced screen. It does not sound like a software thing, but rather a hardware malfunction.

  Is your normal screen during startup? If so, I'd say just remove your existing display drivers and install the new. But if it s like you described then it must be a hardware problem and the machine should be checked by a technician or at least a service partner.

  Would be better if your bring your machine to an ASP for a checkup of material.
  If you need assistance to find the ASP closest, try this link (the ASP index):

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Welcome and good luck

• Phone of blackBerry Smartphones does not work properly after upgrading Poynt

  Hello.

  Yesterday, I upgraded my poynt app, which seems to have causes all types of problems with my phone.

  (1) my email account icons have all disappeared, although it recognizes new messages, I can't access it.

  (2) the device does not allow me to access my texts all the time as well, and I get errors such as:

  Eception exception: application_net_rim_bb_message_app (231) does not.  I had the same message with several different numbers.

  I also have java.null messages, even if it is rare and I don't remember the exact error.

  (3) desktop manager cannot access the device, it does not allow me to backup my data.

  (4) I tried to reload the os, and applications but it fails because it cannot back up data...

  I'm lost and can't seem to find help on the net for this, and at this point, I want to just wipe the slate and start over from scratch.  Maybe completely reload the software or something.  I have most of my contact information on my sim card from my previous phone, data loss would be minimal...

  can someone help me please understand what to do.

  Info on the device

  Your carrier: att

  Model information and the version of the OS (go to settings, then Options, then):

  8900 v4.6.1.231 platform 4.2.0.108

  Apps and free space

  hard battery pull did not.

  Installed apps and their version if possible.  I have several apps installed:

  Poynt, bloomberg, score, xenozu, facebook, bablphone, CBS Spanish football, dictionary.com, anchor.  all are the latest versions, except for some reason any phone does not recognize that I have the latest version of home.

  but the last poynt update caused this, and I have already deleted poynt.

  Thanks in advance for your help.

  Thanks for your help.  So a question I had was that my camera was unable to save all the data, and therefore loader did not work properly.  I read somewhere that you can stop the car to the top, did this and reloaded the new os.  I think that things are finally working

  Thanks again for your help.

• HAdobe Illustrator CC 2015 does not work properly after upgrading from 2014 CC

  Adobe Illustrator CC 2015 does not work after update from 2014 CC. I have a black screen and I am unable to work. Tools work, but I don't see any results. Could you help me solve this problem? Thank you!

  Try the toggling of the GPU preview

  Display > GPU preview
  Windows: CTRL + E
  MAC: CMD + E

  You can also try switch to wireframe mode.

• Satellite L30-134 does not access BIOS after upgrade with SSD

  Hello

  I have a problem with my old Toshiba L30-134.

  When I try to replace the old with new SSD HARD drive, I can't start BIOS.
  But when I remove the DVD-ROM laptop and leave there only SSD, then BIOS can start and I see the drive detected. DVD - ROM has PATA/IDE interface.

  I also tried IDE adapter SATA (like this: [adapter | http://goo.gl/W3TpXt]) for replacement of the DVD-ROM with second SATA HDD and I had the same problem when the disk was present in the adapter.

  When the second HARD drive was not present in the adapter, BIOS began. And it's not just about BIOS.

  Computer is blocking on startup TOSHIBA logo screen during the hardware detection and there is also no error message.

  I can't change the settings on the device SATA IDE/AHCI mode. Is there a workaround with riders or a software solution?

  Thanks for help

  Hello

  > When the second HARD drive was not present in the adapter, BIOS has begun. And it's not just about BIOS.

  You replaced the STRANGE with a HARD drive?
  It won't work buddy. The s laptop computer's optical disc drive supports IDE controller. The HARD drive seems to support the SATA controller.

  The laptop does not power upward because the POST (power on self-test) cannot be passed correctly. During POST the laptop s material will be checked for a possible malfunction or compatibility issues. In your case, the hardware is NOT compatible and that you can't change that.

• Satellite L70 - A - 11 c does not power on after upgrade RAM 4 GB

  Hello

  I wanted to add 4 GB of RAM and I took a DDR3 1600 MHz SoDimm of Corsair.

  When the RAM is connected alone or together with the original of the RAM, the laptop does not boot at all!
  I tested this with another laptop RAM and the RAM works perfectly.

  I assume that only the type of DDR3L (1.35v) is accepted and not DDR3 (1.5 V). Can you confirm?

  Do you recommend a specific brand or type of DDR3L which is of course compatible with the Satellite L70 - A - 11 c?

  THX in advance
  CortX

  Hello

  AFAIK the module of RAM 4 G compatible Toshiba was number piece + PA5104U-1M4G +.

  The Toshiba PA5104U-1M4G module is exactly the same as the module of Kingston + KTT-S3CL / 4 +.

  Supports the Kingston KTT-S3CL / 4G * 1.35V* and, therefore, I assume that you have to use the modules supporting the 1.35v and the 1.5V modules would cause the problems mentioned.

  Hope this would help you to get the right RAM module.

• DesignJet 111: DesignJet 111 - printing problems - no printing after upgrading to Windows 10

  Several problems to the upgrade of WINDOWS 7 for WIN 10.

  The HP DesignJet is 'offline' and can't figure out how to change the setting of "online."

  The definition "print directly to the printer" is not.

  Yellow flashing on the printer dashboard - magenta ink cartridge shows empty, but it is full.

  Computer HP printer installed - poster is in the Device Manager - watch "this device is functioning."

  Printer is listed in devices and printers.

  HP Support Assistant doesn't recognize - printer in the list, can not find device during an attempt of "add design.

  Printer turns off or recycle off on after turning on.

  Hello

  If you have a driver problem:

  Remove the driver completely from the computer, then download and install the lates driver.

  Here is the link incase you need

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=4123145 & swLangOid = 8 & swEnvOid = 4192

  Now, the yellow light flashes on the Panel means that the printer needs attention, like:

  -Close coverage which is open

  -Of paper

  -Paper tilt

  -Jam

  -An error code

  If you have 6 columns on the levels of ink instead of 4 is because you have an error code.

  On the following link, you can find more information on how to prepare the error codes

  http://h20565.www2.HP.com/hpsc/doc/public/display?sp4ts.Oid=352387 & docid = emr_na-bpp03841

  If you have an error code, the printer appears offline on your computer.

  On this other link, you will find how to check other messages on the printer

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c01669949

• Printer HP C310a Printsmart: c310a printer cannot print after upgrading to Windows 10

  After you install the free upgrade to Windows, the printer is impossible or impression.

  I managed to re - install my printer driver via the «PRINT INSTALLATION WIZARD»

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PIW

• HP Officejet Pro 8500 a A910a: problem formatting of printer after upgrade to Windows 10

  After the upgrade to Windows 7 to 10, some printed documents very well while others print in close columsns of 15 letters causing a document 1 page run 6 to 8 pages long and useless.

  I downloaded the latest driver from HP and used their diagnostic tests.  I used Windows Diagnostics.  They suggest no action.  I contacted Microsoft 3 times and technicians turned out to be unnecessary; It was suggested that finally back to Windows 7.  The printer works just great.  This printer is no longer under warranty.  I have a same printer which works well on another computer running Windows 10.

  I would like to know how to solve this problem caused by the upgrade to Windows 10.

  Wing wrote:

  I use Outlook.  Previews all looked normal.  I had problens with printing of emails but have been able to print a PDF document.

  Hi Wingtip,

  Please follow these steps to try to resolve the problem:

  1. open outlook

  2. double-click on the email address that you want to print (the email must open in a separate window)

  3. click on file and then print

  4. in the print window, select your printer and click Print below options.

  5. in the window options printing, make sure that the print style is set to memo, and then click Page layout

  6. click the paper tab, and set the margins to 0.50 '' on all sides. Also make sure the paper type and size is set to letter.

  7. click OK and then try to print.

  Please let me know if this helped.

• 4500 wireless: HP Solutions Center does not work since the upgrade to windows 10

  Hello

  My solution Center no longer works since I've upgraded to windows 10.

  Thank you

  Welcome to the HP community @DJHar,

  I understand that the Solution Center Software no longer works since you have upgraded to Windows 10, and I wanted to reach out for help. I would say firstly under the HP printer install wizard for Windows, that will find the drivers and software for your Officejet 4500 Wireless and install the correct software for Windows 10. Try the software for access later, and it should work.

  Let me know the results!

  Good luck

• Why Microsoft does not allow the free upgrade to Windows Media Player in Windows 8?

  Microsoft Help has tried to help me online and couldn't do

  I have only 3 days to do so (January 31, 2013)

  Hi Ron,

  Welcome to Forums Community Microsoft and thanks for posting your query on the matter.

  I'm sorry to hear that you were not able to upgrade to Windows 8 Media Center. We appreciate your patience. I can do my best to help you get this problem, if you can provide me some information about this problem.

  (1) are you referring to Windows Media Center or Media Player?

  (2) what exactly is the problem you are having? Did you get the free product key that you asked where you have problems with?

  (3) have you been able to place the request for the Media Center button successfully from this link: http://windows.microsoft.com/en-US/windows-8/feature-packs ?

  (4) If you have already placed the request, when it was made? It had 48 hours?

  (5) did you contact to check the status of your application? Was it the Microsoft Technical Support or the store Support team?

  Please make sure you do the application from this link:

  http://Windows.Microsoft.com/en-us/Windows-8/feature-packs

  If you have already placed the application and you have been waiting for more than 48 hours, and then I would ask you please click on these links and contact Support for Microsoft store for assistance.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

  http://support.Microsoft.com/GP/ESD-support-phone-numbers

  http://support.Microsoft.com/GP/customer-service-phone-numbers

  Hope it will be useful. Please do not hesitate to come back to us for questions or problems related to Windows.