HPa1519h Pavilion Media Center does not play audio

I bought a HP Pavilion of a1518h with a sweet WinXP Media Center Edition 2005 from someone, and it does not play the audio files. I noticed, the called program manager of sound effects is not found, and also, I do not see any what PCI sound card to come with him despite all the buttons mute and volume on his keyboard. If I chose the control panel / sounds and Audio devices, volume is just not said 'No audio device' now. Hmmm.

I buy a sound card M-Audio 2496 since to use its MIDI in / out, but audio in/out-wise, I still prefer to use the resources of the HP (if I can get them work), so that I can plug both cables in the HP front and rear outputs stereo, and, more important still, the computer reacts to the volume buttons and mute the keyboard. (2496 card does not work). Could someone give advice what Miss me exactly and how do I proceedto back the sound capabilities of the HP?

I tried to use HP application recovery to see if I can restore sound effect Manager, but he has not been listed as a recoverable application / choice of the driver. I tried to restore XP to an earlier date (maybe?), but the system restore reported that is not possible. I do not have a Windows HP disk, but XP is installed in a 10 gig recovery partition. I tried to locate a Setup program the sound effect Manager on this partition and my recovery of HP DVD system without success. Where should I go from here?

This document from hp should help:

http://support.HP.com/us-en/document/c01427349

If this does not help, try the procedure described in this doc:

http://support.HP.com/us-en/document/bph07154

Let us know how it goes.

Tags: HP Desktops

Similar Questions

  • Pavilion Media Center does not restart after the full system recovery. get the error code 0 x 4001100200001005

    Pavilion Media Center does not restart after the full system recovery. created recovery disks when purchased new. get the error code 0 x 4001100200001005

    Original title: recovery problem

    Hello

    According to the HP Support Forums, this error may be to do with the hard or for other reasons.

    You never have it replaced with a no HP bought in car?

    Read these threads HP on your error code:

    http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/recovery-disk-error-0x400110020000-1005/TD-p/22936

    http://h30434.www3.HP.com/T5/desktop-recovery-reply-only/trying-to-recover-an-old-PC-error-code/TD-p/964509

    If the original hard drive, press F11 at startup to start the process of recovery partition HP, did you recovery disks of.

    See you soon...

  • CD burned in windows Media Center does not play in car cd player

    The cd I burned using windows media center will not play in my car. Says "bad CD". But he does not play in my cd player. I don't understand??

    Thanks for your comments. Unfortunately, I had already done what you suggested before asking for help. It darn anyway :-(  But thanks again

    ==================================
    Just to make sure there is a CD... check Audio (music) the
    Directory by going to start / computer or click
    the drive the drive letter. File extensions
    see you on the CD should be .cda

    Could be a total waste of time, but I think I'll try
    burn an Audio CD (music) with the following free software
    just to see if it might work.

    CDBurnerXP
    http://www.CDBurnerXP.se/
    (works on XP, Vista, 7)

    CDBurnerXP to make Audio disc
    http://CDBurnerXP.se/help/audio/compileaudio

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows media player does not play audio files downloaded from the Canon HF M41 HiDef camcorder

    I downloaded audio and video files from a Canon Vixia HF M41 camcorder to my computer.  When I try to read files with Windows Media Player, the video is fine but the audio is only a hum.  What codec must be installed to play audio, and where it is available for download?  My operating system is Windows 7, version 6.1 (Build 7601: SvcPack 1)

    Hello

    What type of file are you trying to play?

    Method 1:

    I suggest you follow the link and check.

    Play an audio or video file: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

    Method 2:

    I suggest you follow the link and check.

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

    See also:

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  • Media Player does not play audio properly during playback of video file.

    I have Windows XP and made a few videos using Adope Prime sofdtware.  When I play them back on the Media Play it starts OK (both video and audio) and then the sound stops, but the video continues until the end I tried to reduce the audio file by lowering the quality, but it did not help.  This could be the cause to happen?

    Download and install the audio codec: -.

    http://AC3Filter.NET/wiki/Download_AC3Filter

  • m8120n Pavilion Media Center: can not enter audio speakers

    Hi, I just bought a set of speakers Creative Inspire T5400 2.1 which have 3 sons. I plugged in the audio, but I get no sound. The three shots that I plug are marked side rear c/sub.  The speaker is marked simularly. The volume mixer is marked device, speakers and Applications, Internet Explorer, and the two show sound on the screen but no sound from speakers. I replaced a set of speakers that only has one wire for the computer and taking, in that it goes is marked 'out' and it will output the sound quality. What should I do to get audio for new speakers? Thanks for your help. Jim

    I did some research and I think I have the answer to my problem. The motherboard on the HP m8120n is a P5BW-Louisiana (Linden) which has a Realtek ALC885 audio configuration. Unfortunately when get you it, it says "audio integrated is not available if a sound card is installed." On this model there is no sound card but it is provided with a TV card, which I'm sure would also disable audio integrated.

    So it seems I'm stuck like Chuck. I have no immediate plans for the TV card but I'm not going to get him out because these speakers are not otherwise valuable. I'll just sell on Craig's list and get a pair of computer speakers that runs out of the output.

    Thanks for your help, Jim

  • Windows media Center does not work correctly.

    * Original title: Windows Media Center

    Downloaded 10 hated windows he returned to windows 7

    Now, windows media Center does not work correctly. Very slow to do anything whatsoever at all, let alone play music

    Any suggestions please

    Try to uninstall, reboot, reinstall, restart WMC according to the http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/ article is for WMPlayer but just to check the entry of WMCentre instead.

    If that doesn't help, try a SFC/scannow and see if it detects and corrects something - https://support.microsoft.com/en-us/kb/929833

  • Windows 7 Media Center does not start from the icon...

    If I right click on a .avi file, I can choose Media Center and it works fine, but if I choose the icon Media Center, Media Center does not open. It's as if the shortcut has no where to go. The multimedia center in the Start Menu icon is a white icon (no picture). I can choose to start Media Center when Windows starts and it works fine. The shortcuts will perhaps in the wrong place...

    My PC;

    HP Pavilion dm-4

    2.5 Ghz processor, 6 GB of Ram, AMD Radeon Display, 1 TB harddrive...

    Dual Boot OS: Windows 7 Ultimate SP1 and Windows 8 Pro

    BTW, this laptop is Dual Boot with Windows 7 ultimate and Windows 8 Pro. The Win 8 Pro Media Center works great.

    This problem with Win7 Media Center which happened BEFORE I installed the Dual Boot.

    right click on the menu icon, then the shortcut, and then in properties, paste into
     
    %windir%\ehome\ehshell.exe
     
     
    Barb
     
    MVP - Windows/entertainment and connected home
     
     
    Please mark as answer if that answers your question
     
     
     
     
  • I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

    I need help on how to audio output when I go. I ticked the box at the bottom, but when I go to view my video on quicktime, it does not play audio.

    GUYS, I GOT IT. AND THE SOLUTION IS WAYYYYY WITH JUST A RENDERING. So after countless time I spent trying to make it, I found a way that me really happy that my old rendering has not worked. All you have to do is download adobe media encoder and BAM your gold. I make it in h.264 that i couldt using the old rendering and now it works fine.

  • Media center does not

    Original title: units media center update

    my media center does not work. opening moves the cursor to disappear. tried to download the update day but failed to get a verification code. use 32-bit family vista premium and validator wants xp does not detect the validator of vista, so impossible to download the update. can I uninstall and reinstall Center media from a free source somewhere?  any suggestion is appreciated.

    stumbling around forums (for one?) when I read that you can only download via ie. off of chrome, download the cumulative update and voila units media center ready to record live TV. Thanks again for the pointers and for putting up with me. call it fixed.

  • Why vista Media Center does not recognize my card tuner Hauppauge 1850

    I just install WinTV-HVR-1850, Manager of device States work properly, yet Media Center does not recognize the tuner... Keep received message "no tuner found" not could someone explain what I need to do.

    Hello

    I suggest that you install the latest driver and software from the Web site below and check if it works:

    http://www.Hauppauge.com/site/support/support_hvr1800.html

    Try to contact the hardware manufacturer for assistance.

    Hope this helps,

  • Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

    Windows Media Center does not work on both my XP and Vista computer. The two events lastnight

    Hello

    For someone to really help him, it is important to give as much information as possible.

    You say "my computer XP and Vista" are this one computer dual boot with XP and Vista, or is - the two computers 'single '?

    If it happened "yesterday" did you updated anything or whatever installed?

    Having only happened yesterday have you tried a "System Restore" to see if this corrects the problem?

    What TV card are you using and have you verified that this works correctly?

    If you get not a photo is the antenna in place properly?

    Do you get any error messages? More information, you can provide more someone will be able to help John Barnett MVP: Associate Expert Windows XP: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

  • Windows Media Center does not record the calendar.

    Planning to record a program, but sometimes lapsed time up to the point where it does not record. I am running Windows 7 Home. Yes, I checked preferences but which differs only up to 15 minutes max.  I have reinstalled twice already. Why please?

    Hello

    (1) did you make any changes before the show?

    (2) what is the brand and model of the computer?

    Windows Media Center records the first home run HD programs or any which TV tuner installed. However, you may need to follow a few rules.

    -If you turn off your computer, Windows Media Center does not have a regular program. The computer must be turned on or "standby mode" to record a television show. The computer will not automatically in standby mode if Windows Media Center is open.


    -Make sure that you turn off the screen and lower or turn off the sound if you have one at the request of a record in the middle of the night and don't want to be disturbed.

    -Your scheduled recording may not save in the following situation: schedule you a recording in Windows Media Center to start in less than ten minutes, close Windows Media Center and put your computer into standby or hibernation mode immediately. Use or one of the following options to save your record programmed:

    a. do not close Windows Media Center before you put your computer on standby or hibernation.
    b. after having programmed a recording, wait a minute before you put the computer in standby or hibernation.

    I would have you refer to the article below:

    Why my TV did not show record in Windows Media Center?

    http://Windows.Microsoft.com/en-in/Windows7/why-didn

    Please let us know if that helps.

  • Media Center does not open on Windows 8.

    Recently built a new PC with Win 8 64-bit Pro and Media Center add-on bought.  However, whenever I click on the WMC icon, nothing happens. I installed a bunch of software on my machine, and some of it was a bit old stuff that I had to run in compatibility mode + install other updates (from / seller directly) to work to win 8. I have no doubt that if some of the older things may have pushed something - it seems, remind one of them wanting to install a .NET framework or something - but I don't know how to solve problems.

    I tried to turn the checkboxes of the WMC feature and restart but that did not help. I tried to start the PC in safe mode to see if that would help solve the problems, but he did not. My ideas on how to solve the problems and if there is anything I can do in addition to trying the Windows 8 update (ugh). Any ideas to help me? The update would be worth trying? I really don't want to spend a whole day trying to track this one down and a lot of software that I'm not sure that the uninstall is the culprit or not. Any help would be appreciated. Thank you.

    Returns / Refunds downloadable software

    ' Returns for downloadable software products will be honored for thirty 30 days from the date of purchase.
    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Return_Exchange

    .

    What happens if you add features to Windows 8 didn't work?

    If you were not able to install the feature pack you have purchased, http://go.microsoft.com/fwlink/p/?LinkID=260702. There could be an application on your PC that prevents installation.

    Add features to Windows 8: FAQ
    http://Windows.Microsoft.com/en-AU/Windows-8/Add-features-frequently-asked-questions

    You can call your local Microsoft Support via their phone number for your region.

    Media Center - remove and revert to Windows 8 Pro
    http://www.eightforums.com/tutorials/16077-Media-Center-remove-go-back-Windows-8-Pro.html

    You can try uncheck Windows Media Center via Control Panel / programs and features / Turn Windows Features on or off / multimedia / Windows Media Center.  This allows to uninstall it.  You restart and then reverse steps to reinstall.

    Windows 8 Media Center does not start
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/Windows-8-Media-Center-wont-start/d33b95d6-ccd4-44a2-9f5c-53805d27a716?msgId=004fa096-c40e-49b8-A389-4359d964ad37

    Most of the new machines come with a recovery partition, allowing you to return your purchase, you will need to check your user guides (or the manufacturer's Web Site) for instructions.  Choose this path requires you to save all the data first.

    These options are also integrated to Windows 8.

    How to restore, refresh or reset your PC
    http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  • Pavilion m7650n PC Media Center does not start XP

    1. model: m7650n

    2 product number: RF254AA

    3. product name: HP Pavilion Media Center PC

    The first error message is a black screen with white text:

    Windows could not start because the following file is missing or corrupt:

    \WINDOWS\SYSTEM32\CONFIG\SYSTEM

    Which suggests a corrupted registry.

    Unfortunately, the system does not boot the recovery partition (F10).

    I found that an article at support.microsoft.com/kb/307545 suggests starting the XP installation CD. I started a XP Media Center CD. That will load the drivers, but after saying Windows startup, he abandoned a BSOD:

    STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0 X 0 0 X 0)

    Suggest to change the SATA mode in the BIOS RAID, AHCI or IDE. None of this helps to either.

    Scanning of the hard drive on a well known system clean some viruses, but that has not changed the situation when you try to start the HARD drive again.

    Any ideas?

    Thank you

    Laboratory TimC

    Hi Tim,.

    Put the drive in another PC that you did before and back up your critical data. You can reformat the hard drive. Then reinstall the drive in your PC and set the SATA to IDE controller mode and save the setting. Reboot into bios and make sure that the resulting setting is saved.

    Now, reboot and use your HP recovery disks to return your PC to a first day of factory condition.

Maybe you are looking for

  • Hardware issues with HP Deskjet Ink Adv 2060 K110

    Nice day Product name: HP Deskjet Ink Adv 2060 K110 Windows 8 Once the printer is powered on, the thing inside that contains the ink cartridge moves once and "plant". What happens usually when the printer is turned on is that 'door-ink cartridges' sl

  • LabVIEW data into a text file

    I have a LV program to save the LabVIEW data into a text file. The LV file is attached. My problem is: the first data that are saved after the headers of data, is on the first line of the text rather than the second file. Ideally, it should be line 1

  • Recovery mode v 1.03?

    Probably screwed up my player on... This all started when my player is stuck on 'updating of the database' screen. (still don't know which file was, but I guess I will deal with that later). Anyway Ive spent the day of formatting and setting a mode o

  • Required Windows Vista programs

    Just bought second hand desktop using Windows Vista. There are a LOT of programs installed... How will I know what programs I can not remove.

  • W520 Ultrabay second hard drive adapter

    Hello I just bought a W520 and I would had an SSD. The idea is to remove the current HARD drive, place a SSD in place, remove the optical drive Ultra Bay and place the (deleted) HARD drive. I would like to know if I should order an adapter to connect