HPC7250 printer all in one will not be installed to G500 computer laptop Lenovo with 8.1

Similar Questions

• ENVY 100 all-in-one: Envy 100 printer all-in-one - will not glossy paper 250 gsm

  Difficulties that the printer will not accept 250 gsm paper past the printhead.

  Followed him orders for cleaning rollers, reset by disconnecting the power and brought etc. cartridges.

  I note others have had the same problem which seems to have been set by a semi of hardware reset. How can I get the required for the semi reset procedure?

  Thanks in advance.

  Welcome to the @noxasforums.

  I saw your post about your Envy 100 not pulling by glossy paper 250 gsm and wanted to answer you! I checked the specs for the Envy 100 and as you can see below, the printer should take in if you use a format supported below. Maybe you can try the steps from the link I posted for you. I think the cleaning rollers should help. You can also try to select different types of paper to see if one works better than the other.

  Let me know what happens!

  • HP ENVY 100 (D410) and 110 (D411) e-all-in-One Printer Series - 'in paper' Error Message displayed the ENVY and the printer isn't looking upwards or the paper feed

  Tip: Make sure that the printer is plugged directly into a wall jack, avoiding bars power and surge protectors. This ensures that the printer is full on.

  

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• CA410 all-in-one will not be installed... does not detect the printer

  Help... cannot install printer s/w

  I have a PC running W7 64 bit

  Printer is all-in-one CA410B... It was installed and running, a couple of days he threw error "missing components" and would not printing software launch.

  Tried to re - install... failed

  Most recent downloaded software file... Tried to re - install... failed

  Removed all... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install... failed

  Has started at the beginning of the mode... tried to re - install "as Administrator"... failed

  Each time, it happens to the screen to plug the USB cord... I do it... get the "Boing" sound so I know PC has detected the USB device... and I see "Installing message device driver"... but the HP software does not see that... and stop right there.

  See the attached screenshot

  If I check the box to continue without attach printer full installation does not occur.

  In Device Manager, it says "Photosmart Prem c410" if I removethese it will not install

  I guess that W7 is detect the printer and with the help of a driver that is installed, rather than seeing the HP software that? the clues how to get around this, I want to get the complete package installed it again.

  

  Try using the brush included in the CD or download.
  Of the original printer installation CD:
  1. Insert the CD in the drive and then cancel Setup
  2. open my computer and click right then on the CD from the drive and select open
  3 open the Util folder
  4 open the CCC folder
  5. run the L4uninstall.bat
  6. once the uninstall is complete, restart the computer
  7 run the Accessories\ System Tools Disk Cleanup
  8. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  9. use this tool to clean the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  10 download the drivers and full software features
  http://goo.GL/VQW7M
  11 start the download to reinstall the printer
  Starting a download:
  1. run the disk cleanup on your computer
  2. download and run the software and the drivers below.
  http://goo.GL/VQW7M
  3. once the download is done retrieve, cancel the download.
  4. click on the start menu.
  5. click on run.
  6. type %temp% enforcement
  7. Locate and open the folder starting with 7z (example: 7zS2356)
  8 open the Util folder
  9 open the CCC folder
  10. run the L4uninstall.bat
  11. once the uninstall is complete, restart the computer
  12 run the Accessories\ System Tools Disk Cleanup
  13. download and install the latest version of Adobe flash player
  http://goo.GL/R1hy
  14 use this tool to clean the system and the registry. Note: This utility is not HP sponsored or approved. HP and I are not responsible for damage or loss of data caused by the utility. This step is optional. You can skip if you want.
  http://goo.GL/tbpvF
  15 download the drivers and full software features
  http://goo.GL/VQW7M
  16. run the download to reinstall the printer

• My HP Officejet 4500 printer all-in-one will not print web pages

  My new printer will not print anything when I try to print selections as a route on a web page of travel.
  Other features of the printer works k o such as print emails.
  I have Windows 7 Professional 64 bit system.

  "My new printer. »

  For a newly installed printer, you may need to reset some hidden preferences, print.print_printer, in particular, for Firefox to recognize the new printer.

  • See-> http://kb.mozillazine.org/Problems_printing_web_pages (see "Reset printer")
  • See-> http://kb.mozillazine.org/About:config

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check-> http://www.mozilla.org/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plug-in for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• 3520, printer all-in-one will not connect wireless

  I am running Lion on my Mac. The printer works correctly when it is connected by the USB cable. The test of the printer indicates the wireless connection is OK. But when the cable is disconnected, my computer does not find the printer so I can't print wirelessly. The computer says it is plugged into the same ID wireless. I tried to reinstall the HP software to no success. Very frustrating that the printer was working wireless for a year with no problems. It just stopped during the night. Thanks for any help you can provide... Ted

  Hi TED1234,

  There is a chance that the HP software that came with the printer may not work with your version of Lion. I recommend to download the installation here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-103382-2&cc=us&DLC=en&LC=en&OS=4114&product=5162506&sw_lang=

  After you download the driver, I recommend trying to follow the steps listed in the method three second-stage for OS x 10.7 Lion. In step 2 of the second method, there are 2 options. According to what is invited on your Mac, you will want to follow the instructions for the appropriate option.

  Please specify the details of your installation if this does not resolve your problems of wireless configuration. If you encounter error messages, please note them here and attach a screenshot of your laptop. You can take screenshots by pressing "Control + shift + 4" and the screenshot will automatically record your desktop.

  Thank you.

• My Officejet 6500 E709 all in one will not print black.

  My HP Officejet 6500 E709n all-in-one will not print black.   All other colors work very well.  Have you tried what follows - new black cartridge installed, ran the print heads clean utility, made sure the wind was compatible black ink cartridge, turned printer off and restarted.  Print tests still not print black - other colors and images to print, but not text black or shades of black in images.  Any suggestions on how to fix or what needs to be repaired?  Thank you.

  Hi jim: I just had the same problem a few minutes ago. After having gone through all the troubleshooting steps, I realized it was all just a bad cartridge. The PIN on the printer heads were not reading the new cartridge, so nothing in black print could be printed. I installed a new black cartridge and I could resume my printing projects. I then contacted the HP store directly to report the faulty cartridge while they could send me a new, that I won't be out of pocket for a cartridge I bought directly from them.

  Hope this helps you with your problem.

• HP C4280 all-in-One will not print photos on any HP photo paper

  HP C4280 all-in-One will not print color or B & W photos on photo paper.  Color and B & W photos on plain paper prints.  It is used to print normally on all documents.  No change, I am aware of cause this malfunction.  Any suggestions?

  Open your printers folder and right-click on the printer and review the printing preferences. Set the media media photo here and in the application you are printing from. When you say that it will not be printed on photographic support what do you mean... the page is white? the quality is bad?

• My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.

  My HP Officejet Pro L7680 all-in-one will not print blue but my ink level is fine.  I tried aligning the printheads and clean the print heads, but still does not work.  Help!

  Thank you.  It seems odd that the magenta print very well and it seems that the cyan and magenta use the same print head?  I will contact HP support.  Thanks again for your help.

• Microsoft Picture It! 2001 will not be installed on my computer. The installation program detects that IE 5.5 installation is incomplete.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  Microsoft Picture It! 2001 will not be installed on my computer.  The installation program detects that IE 5.5 installation is incomplete, but I have IE 8.  I'm running Windows XP Version 2002 SP 3.

  My hard drive has been replaced and I can't reinstall Picture It! program.

  ======================================
  You may need to go back to IE6 so that PI2001 to install. Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My HP Photosmart C5180 all-in-one will not print text correctly in black, color print very well.

  My HP Photosmart C5180 all-in-One does not print black without be eliminated text or streaks in the text. Will print fine text color.

  Have tried all the "patches" you list and much more. The printer prints fine on my old PC Windows XP and worked fine on my

  new PC using Windows 7 until recently.

  Please don't tell me to... Reinstall, download the new driver, install the new cartridge, clean align the print heads, different paper or go to 'solutions '... Etc... Etc.  I HAVE ALREADY BEEN THERE AND DONE THAT!

  Everything you "patches" end with 'the unit of service... " WHAT IN THE WORLD WHAT THAT MEANS!

  This has been a nice printer for more than 5 years, but is somewhat glitch spoil me when using the BLACK INK?

  Gordon,

  Thanks for the reply, expecting not one, but what you say is all that we need to buy another printer if we did all the "fixes", etc... etc. you know that take a printer to a repair shop will cost more

  then buy a new one.

  It was stupid of saying me to check on the warraty of HP page when I already told you that the unit is 5 years old.

  But don't thank you for the reply... even if it was a joke!

• HP 1315xi all in one will not print.

  Recently had to wipe my hard drive and reinstall everything.  I use Windows 7 (64-bit), and my all-in-one does not print anything from the computer.

  I downloaded the latest driver for the 1315 all in one series (AIO_CDB_NonNet_Full_Win_WW_130_141.exe) from the Web site.  After that several unsuccessful attempts installation, following the troubleshooting guide, I was finally able to have it installed, but it still does not print.  It will scan and copy, but not reading as a printer.

  Help, please.

  Hello althor1170

  It seems to be a problem with the computer and the printer communicate with each other. Have you tried another USB cable or port? Have you tried setting the printer wireless or network? If he works on the network, then the problem is with the USB cable or port. You are using a USB hub?

• HP 7210 all in one - will not be printed on the fast project configuration

  For the last two weeks, my 7210 HP all-in-one has decided that he does not want to print on quick project more.  I have the default settings of the printer on quick project, and I even went and edited individual documents to ensure that they are on the quick project, but it still prints on quality.  I do a ton of printing on a daily basis, and that is to kill my ink, not to mention how long it takes.  My OS is Windows 7, 64-bit.

  Hey @kmh1883,

  Thanks for getting back to me on this subject "fast draft" with your HP Officejet 7210 all-in - One Printer. Even if printing HP and doctor Scan found no problem, it seems that you may have a driver conflict. I would like to try another driver at the moment to see if this clears up your printing problems.

  How to add another driver:

  1. Click on the Start menu
  2. Select the devices and printers
  3. In the devices and printers folder right click on your HP Officejet 7210 and left-click on properties of the printer
  4. Left click on the Advanced tab
  5. Left-click on new driver
  6. When the new driver window just press 'Next' until you see a list of manufacturers on the left and a list of Printers on the right.
  7. Select HP as the manufacturer on the left
  8. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  9. After selecting Deskjet 9800 hit next complete the new driver Wizard
  10. Under the printer properties window, select 'Apply' but do not hit OK
  11. Select the general tab
  12. Rename your printer in HP Officejet 7210
  13. Click OK
  14. Finally, right click on your HP Officejet 7210 one more time and left-click on Printing Preferences
  15. Left click on the paper/quality tab
  16. Left click on the drop down menu 'Normal' for quality printing at the bottom right and change its project of Fast
  17. Press apply and OK

  Test print from the print driver Deskjet 9800 replacing to check if the setting "Fast Draft" remains.

  Please let me know if this solved your problem. Good luck!

• Printer HP 6210 all in one will not print computer

  My HP6210 all in one printer will not print from a computer that has Vista. My operating system is Windows. The printer worked fine with my old laptop that did not have Vista. However, as soon as I have my Phoenicia connected, which has Vista, it will not print. My computer doesn't work anymore so I need to use hers. What can I do to make it work? Thank you

  Beeky27

  Hi @Beeky27,

  Welcome to the HP Forums!

  I noticed that your HP Officejet 6210 won't print from your Windows Vista computer. I am pleased to see that for you!

  First of all, I would make sure that the full feature software and drivers are installed, by downloading it from this link: HP full feature software and drivers. Then I would run the HP print and Scan Doctor, to ensure that everything works.

  Let's start with these steps and go from there!

  I hope this helps!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Envy, printer all-in-one: printer, HP Envy all-in-one will not print after reinstalling instant ink program

  I have two printers, exactly the same thing, 5530 want all-in-one. One is in Arizona where I live part-time and we're in Oregon where I live part-time. I stopped instant Oregon printer ink when I went to AZ last November. I use instant ink program to AZ while there but she stopped this week when I went to Oregon. I tried to restart instantly ink, got an email that it was successful, but can not get all documents to print from laptop to the printer. Yesterday that it said unable to connect to the server and I chatted for two hours with HP on how to solve the problem. It will print the web now compatible congratulations sheet, but if you ask the computer to print, it circles repeatedly and it seems to wake up the printer at all.

  Now:

  1. If the printer is connected to your Mac via a USB cable, remove it.
  2. Close any programs you have open.
  3. Click the icon of your Apple system and print and Scan preferences.
  4. Hold down the CTRL key and click the icon of your printer on the left.
  5. Click on reset printing system.

  If you removed the USB cable, connect. Otherwise:

  1. Click the more in the lower left corner.
  2. Select your printer from the list.
  3. In the box titled use select your printer in the list.
  4. If you have an option to choose a name or location for the printer, enter a name such as Oregon. This should help you and your Mac to make the difference between your two printers later.
  5. Click on Add.

  Please let me know the results after following the above. If you can print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

• Printer HP 3050 J610 series all in one will not print any documents

  I'm on Windows 7 Service pack 1 and I have a HP Deskjet 3050 J610 Series All - In - One Printer.it is not wireless I use a USB port for printing.   I have problems printing pdf files as well as Word documents.  I uninstalled and reinstalled the software and drivers; I have restarted my computer several times; I tried the scan doctor and he says everything is fine.  It prints the test pages.  When I press the icon of the printer, it will save the file even if the file is saved to alread. I'm going to planet and save the file again.  I noticed that, for files, it says printer and no .doc or .pdF files.  He also says that it is offline.  I tried the steps recommended for this suggestion has as well and still have problems printing.  The I am trying to print the files aren't new documents except one which is a pdf file.  I hope you can help me.  The window pop up that appears just before printing a 0% for printing.  I hope that makes sense.

  Thank you.

  Maria Holloway

  HI Maria, welcome to the forums

  I noticed your post about the problem you are having with your Deskjet 3050, printing via a USB with Windows 7. I have some suggestions that I would like to offer that can help!

  Perform a clean boot and make sure that your firewall is disabled: Disabling and Re-enabling your software firewall in Windows.

  By this stage and test print while the start up programs and the firewall is disabled, it will show if the mobility programmes have been the origin of the problem.

  Now try to print a document as one. PDF or. DOC.

  If it does not, as a workaround option, try to save documents that you have an impression of question as a different file (do not use in .doc or .pdf format) type.

  Open Word or Adobe and print a blank page (without saving the document) to see if you have a problem with printing.

  Please let me know the results, I hope that my information helped!

  Have a great Wednesday