Hpg61-429mw: Hp g61-429mw

Similar Questions

• HP G61-110SA: HPG61 after use important update of the HP Advisor Win 10 processor

  After win7 Win10 Update, HP Support Assistant also updated but HP Advisor now always works to use 20 to 30% of the CPU.  Someone at - it ideas please?

  Hi @ChrisB4,

  I think that you can get everything you need from the HP Support Assistant. HP Advisor verifies the moor of the PC. But inside the HP Support Assistant who installed in it now.

  Hope this helps to answer the concerns that you have.

  If this solves the problem, mark this message as accept as a Solution.

  Thank you.

• G61 - 420CA: upgrade memory HP G61 - 420 a value to CA?

  I have a HP G61 - 420CA (Windows 10) older laptop that is slowing down and in order to further a few years out of it, I replaced the HD with a 250 GB SSD which increases performance a lot. The laptop max RAM is 4 GB of RAM (DDR2), but I have only 3 GB installed. Reload the ram to 4 GB will be no noticeable performance gain? Don't want to waste money if there is little or no gain... especially for the ram, that would be pretty useless for anything else.

  Hello

  A little and unnoticeable. With SSD, pagefile will better answer time so if you didn't know where you spend your money, you may want to replace 1 GB 2 GB to 4GB total.

  Kind regards.

• HP G61: LAPTOP WON'T TURN ON

  My laptop HP G61 will pass on/setting under tension.

  It worked fine this morning, but when passing on this afternoon, it won't work.  The battery is fully charged, I tried to remove the battery for a while.  Support of the power on button all that happens is 3 small icons to the left will blink for a few seconds then more nothing!

  Hello

  Thanks for posting in the HP Support forum. Welcome aboard!

  I'm sorry for the problems you're having with your HP computer.

  Looks like a problem of material for me. You can visit these official items 2 HP on these issues, meet with you today. Follow the appropriate steps that correspond to your case to try to resolve the problem:

  > > http://support.hp.com/us-en/document/c01732674
  > > http://support.hp.com/us-en/document/c03515402

  If you've tried everything but nothing works, I fear that you will need to bring your computer (or ship it) service - repair center authorized HP. If the computer is still under warranty, you must first notify HP support. If you don't know where such a Center, please contact HP support for help to find a. Here's more information:

  > > http://support.hp.com/us-en/document/c00372730

  > > http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html

• HP G61 - no post power light is on

  Hello

  I read through many post with similar issues but could not find my exact problem.  I don't have a job, but the power led lights up.  The cap lock and num lock lights flash.  I am aware that there is a corresponding code derived ny with the number of flashes.  But my cap lock and num laptop lights DO NOT stop flashing at all.  I stopped counting at 20 as the graphic reference code stops at 6 flashes.  I have done much HARD RESTART without result.

  The solution to this question and leads to the root of gold or ideas will be greatly appreciated.

  Sincerely,

  Frank

  Present the creation of this querry I but to remove all components and re their seat.  While removing the hard drive, I noticed that he was missing a transport screw 'hard drive '.  As soon as the reversal of the laptop upside the missing screw fell the my table.  I have the feeling that this short something on the laptop.  Oddly enough, I read another "g61 no boot" poster on different site and found that someone else had the same problem of screws.  Sounds like something that HP should cover even after the warranty is over.

  Hello fsmclean,

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• G61 - 320CA: upgrade CPU for laptop PC HP G61 - 320CA

  Hello.

  I bought this laptop in 2005 (new)

  Product name: HP G61 - 320CA (laptop, laptop)

  Product number: VM345UA #ABC

  Microprocessor: of GHz AMD Athlon II Dual-Core processor for notebook PC M300 2.00

  Cache of the microprocessor;         1 MB L2 Cache

  Motherboard:, DAOOP8MB6DO REV: D (cannot distinguish if they are zeros or letters after DA and P8MB)

  also written near the edge 16 "OP8

  After a good cleaning, I realized that I have the opportunity to upgrade the processor. The processor is removable.

  The installed processor is an AMD Athlon II

  Is there by chance, a way to find an upgrade to this processor that would be compatible with the laptop?

  Technical support told me that Intel were not capatible to stick with AMD but it coulndn can't tell me which one I could install.

  This laptop is no longer under warranty, but it is in perfect condition. I would like to find a faster processor compatible.

  Even if abandoned, I know I can find an upgrade on eBay (as any one of my office PCs.)

  Thx a lot

  Here is the Manual:

  Manual

  Top of page compatible processor:

  M600 AMD Turion™ X 2 Ultra Dual-Core Mobile Processor:, Processor 2. 4 GHz, 2 MB L2 cache, 3.6 GT/s HyperTransport speed

  http://www.eBay.com/ITM/tested-TMM600DB023GQ-AMD-Turion-II-Ultra-M600-2-4GHz-socket-S1-CPU-procesor-/191892890482?hash=item2cadb52372:g:JC0AAOSwtJZXWho-

  They are practically giving these AMD processors because there is simply no demand away. It might be a fun project and if you have already opened it upwards and I saw how to remove and replace the processor at this price, you might as well. There will be an improvement, but don't expect miracles. Let us know if you need help most.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HELP computer HPg61 turns on, the screen remains black

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Hello

  al1986 wrote:
  

  I put my computer into power saving mode and then it locked, so I forced the closing down. Now, when I turn it on, everything seems to work fine, but the screen remains black and two lights flash in sync - one by the capslock key, and other upward by the end/sys rq and pg up/buttons break. What should I do to get out of this?

  -HP g61 laptop

  -Windows 7 home prem

  Try a hard reset:

  Remove the battery and unplug the DC power adapter.
  Press and hold the power button for more than 15 seconds.
  Plug the DC power adapter (leave the battery for now)
  Press the power button

  Please post your results here.

  Best regards
  ERICO

• HP g61 - 329 ca show power button

  I'm working on a HP G61 - 329 out of friends. It has been completely reformatted from the recovery partition. It is currently running windows 7 Home premium 64-bit. The problem seems to be with the power button. the original battery was bad, so it is not an inside right now. If the laptop is left off and unplugged for an hour or less the power button does not always work. I have that is unplug the power and plug it back in or turn the ac plug into the mains and keep pushing the power a few times and it starts later. Once it is running that first time, I can turn it works as I want or leave it off all night, so it is always plugged in it turns just to try first. It only occurs if it is unplugged for a while then reconnected and try to start. When I plug in the ac adapter the little light beside the plug lights up every time. I tried to re-seating the ram and the hard drive, he pulled completely apart, everything seems OK for me on the Board, but I'm not professionally trained. He started to really drive me nuts lol. any suggestions on what could be the problem? or maybe how to fix?

  Take a bright flashlight and check the plug on the laptop where the power cord is connected, see if it is damaged in the centering PIN.

• internal battery HP G61-632NR

  Does anyone know what type of internal battery that cell phone use?  I can't find ANY info on the HP Support site.

  Hi Beckinista,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your laptop HP G61-632NR and who need the battery internal. Here is a link to the manual. Here are the specs 449729-001Battery for the time clock (RTC) - CR2032 button style real, 3VDC, lithium

  Hope this helps you.

  Thank you.

• HP g61 - 320 ca: memory upgrade

  320-ca G61 memory.  Anyone know if this laptop is ddr2 or ddr3? 4 gb max?

  Thank you... bob

  It takes DDR2 and it installed up to can be 4 GB. See the following link for compatible memory module upgrades. It's inexpensive to upgrade.

  http://www.kingstonmemorycards.co.UK/laptop/HP-Compaq/HP-Compaq-g-series-G61-320ca-laptop

• HP G61-429 WM: USB FOR laptop HP G61-429WM

  Could you please tell me if I can use a Lexar 32 GB jumpdrive USB 3.0 on my laptop HP G61-424WM.

  Thank you

  Hello

  Yes you can, you can use one of the 3 ports on your laptop, even these are all USB 2.0 ports.

  Kind regards.

• My HP G61

  How to disable automatic shutdown due to overheating in my HP G61 laptop.  My laptop is reaching barely 100 degrees F and he died. Then I try to reboot my laptop and it says have reached 900 degrees F. Although this may be a bad idea, I would like to cut the auto off anyway.    Help, please!

  (Sorry for the bad English)

  It's not over heating, but I have no idea what wrong with it. even when I put my hands on the labtop to see if its hot, its cold blood fells even. It may just need cleaning or new sink hink.

• G61-110SA: upgrade CPU G61-110SA

  As a pc engineer, I tried to upgrade my laptop to HP G61 aging wives with a better processor of speck. It was equipped with an Intel pentium T4300 2.1 Ghz CPU P 487 outlet again. I tried to change to a P8600, but the laptop refuses to boot?

  I did several updates on laptops (with similar P CPU socket) and they are all worked well. Even the last one I did on a Dell Inspiron is a breeze.

  It is the first HP laptop I tried.

  Has anyone else had the same problem or can advise please.

  Thank you

  Well, the first thing to do is the Manual:

  Manual

  See the list of motherboards on page 3-4. Your laptop is a GL40 chipset, which is designed for Dual Pentium and Celeron processors and then the GM45 is for Core 2 Duo. The P8600 not compatible with the GM45 card, but would be a P8700. The GL40 jury is not fully compatible with all the features of a Core 2 Duo.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Will be the 500GD Seagate HARD drive work in my HP G61-321NR

  The Seagate 500 GB HDD will work in my laptop HP G61-321NR

  Yes it will be as a sata interface & size 2.5 "& 9,5 mm or less in height."

  I would consider a SSD will be speed big shot in the arm to your machine, to know you can also use 2 disks on this model by sliding the Bay is of dvd player do not use much & using a shopping cart of hard drive bay that you can buy online for less than $10 if the options are very flexible. The dvd player can be put in external usb caddy & they only around $16.

• VV907EA #ABU: hp g61 fails to turn on

  my laptop will not turn on at all the only light I see is for the socket, it lasts 5 seconds when I put a charger. Help me

  Hello @Japheth,

  Thanks for the quick response!

  You can try to see the following guide: HP G61 Notebook PC - Maintenance and Service of Guide

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!